How do I programmatically create and save an empty project?

I can programmatically create an empty project, but when I drop an
invoke node on the project, select "Save", and wire in the desired
path, it results in an "Error 1". I am getting the error on the "Save"
invoke node (An input parameter is invalid.) The only input is the
path, which is correct. What am I doing wrong? Also, how can I
specify a name for the project?
Greg

I think the problem is that you use the current path and strip off the path the current VI's name. This leaves you with a path that has no filename to save it to. Put in a build path after it where you build in a project name with a .lvproj extension. When I did that, the error went away.
Message Edited by Ravens Fan on 08-08-2007 11:36 PM
Attachments:
Create%20and%20Save%20New%20Project[1].png ‏4 KB

Similar Messages

How can I programmatically create and use a global variable?

I have an app where the number of AI DAQmx tasks I create are specified in a config file. I have a monitor task that periodically looks at the latest values from all DAQ tasks. I've been doing this with a set of global variables because it was the simplest way to do it. But to do this, I have to explicitly create a separate AI task that uses the hard-coded global variable name for the DAQmx samples. I would prefer to only write one VI for the DAQ loop that writes to a global variable that I programmatically create based on the config file. The only solution I can think of is to use a global variable "pool" that is sized bigger than I expect to need, and then have a big switch case to select which one I want based on the task index. But this sounds pretty silly.

I tend to agree with Ben. I don't buy the concept of taking the asy way out (globals) because it very rarely will things remain static. You almost always have to extend the features and functionality of an application and then you will run into issues with sloppy and lazy implementations. The solutions offered may require a little time to learn but once you do it doesn't really require any extra effort.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How to Create and Save a workbook on Enterprise Portal

Hi,
I need to find out how I can create and save a workbook (for a query) in Enterprise portal. Can we save a work book and run it in the same format?
Thanks

Hi,
refer below thread
Re: How do you save the Workbook as View when the workbook do not have quer
also see sap help
http://help.sap.com/saphelp_nw04/helpdata/en/4d/f3fa40badbf36fe10000000a1550b0/frameset.htm
Thanks

How to create and save a file in flex web application ?

Hi,
I want to create and save a file form flex web application. Is it possible ?
I have done some googling and found that its only possible through file referece, which needs some serverside implementation be called.
Is it not possible with file reference to create and save file directly ?
Can any one suggest how to over come this.
Thanks in advance.

Alex,
code written with the Flex Builder 3 libraries will certainly run in Flash Player 10. However, what you need is not so much the capabilities of FP10 but the library functionalities of the Flex 4 package. And I think that Flex 4 code will only run in FP10 and not 9 (but haven't tested this as at work we have not yet been permitted to upgrade, so there is not a lot of point going for Flex 4!).
Richard

How to create and save playlist using JMF?

Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
also how can i play .DAT files using JMF?
Does JMF supports AVI,Asf files?

Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
also how can i play .DAT files using JMF?
Does JMF supports AVI,Asf files?

How do you create and save icc profiles using photoshop?

How do you create and save icc profiles using photoshop?

You don't. Color profiles require specific measurement hardware and software.
Mylenium

How to Programmatically Create and Activate an ABAP Class

Hi,
I have a requirement to programmatically create and activate an ABAP class that implements a 'pre-defined' interface.
Do you have any ideas how this can be done?
Thanks,
Shreevathsa S

Hi,
   Try if GENRATE SUBROUTINE POOL keyword can be of your help.
See the below example,
DATA itab TYPE TABLE OF string.
DATA prog TYPE string.
DATA class TYPE string.
APPEND `program.`                     TO itab.
APPEND `class main definition.`       TO itab.
APPEND ` public section.`            TO itab.
APPEND `    class-methods meth.`      TO itab.
APPEND `endclass.`                    TO itab.
APPEND `class main implementation.`   TO itab.
APPEND ` method meth.`               TO itab.
APPEND `    message 'Test' type 'I'.` TO itab.
APPEND ` endmethod.`                 TO itab.
APPEND `endclass.`                    TO itab.
GENERATE SUBROUTINE POOL itab NAME prog.
CONCATENATE `\PROGRAM=` prog `\CLASS=MAIN` INTO class.
CALL METHOD (class)=>meth.
Regards,
Sesh

How does APEX create and save new files. What extension does it save in?

Hi can someone help me with this question?
How does APEX create and save new files. What extension does it save in?
Cheers!
VJ

It's really too bad we can't see VJ's face when the concept sinks in. This is one of my favorite moments when teaching APEX classes. Most people love it, some people don't. If nothing else it really proves the power and performance of the Oracle database. Each page view can generate 40+ queries, yet on the average system this takes less than .04 seconds.
Keep in mind there are no undocumented features or "Oracle Internals" that the APEX team uses to achieve this performance, just sound database design. With every feature they add they evaluate how it will be used and design the tables and indexes to most efficiently answer the query. Sometimes this means going against "purist" normalized principals.

How are ePrint apps created and maintained?

Just bougt a new small HP printer for my home office and discovered ePrint and apps support. And amazed, did not expect this technology in entry level small/home office type printers.
And immediately new questions on what possibilities this opens up for printing applications
What is required to create new apps?
Is it possible to use this technology to add local office apps? I.e. to print site/office specific forms, trivial network interactions and maybe a bit more.
Is subscription type apps supported/allowed, where the app is only available as part of a third party subscription package?
A lot can be built around the email based ePrint service alone, but having ability to also do some simple interaction with the user at the printer would open for a wide range of new possible uses.

Hi,
Double post, please use:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/How-are-ePrint-apps-created-and-mainta...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

Ntenich,
If your table has a Header and your Legend text is in the header, it will be picked up by the table.
Jerry

SAP Query (SQ01) - create and save queryies

Hi Expert;
We wanted to implement SAP query reporting (SQ01) tool, and already developed custom HR infoset and user groups and transported to QAS. We experienced the problem that we can not directly "save" any queries in SQ01. We pretty much have the client opened up and set at "Changes without automatic recording". But keep getting a "transport object create" dialog upon "save" query. But in Adhoc (PQAH), we don't encounter same problem. We wanted our users be able to create and save any queries directly without creating any local objects. Is there another setting that needs to be set?
Thanks for any information that you can provide. Points will be awarded.
Helen

Hello Helen,
in SQ01 you can save queries like in HR Ad Hoc Query (or Infoset query as it is called outside HR).
However this is only possible in the "Standard Area" not in the "Global Area". However as Ad Hoc Query is based on the SQ0x basics it only hides this effect.
If you are doing HR specifics you should consider the documetnation on the special HR switches:
http://service.sap.com/~form/sapnet?_SHORTKEY=01200252310000076208&
In general if you are new to the topic you should consider the courses BC407 for Query Basics and HR580 for reporting in HR.
Also to get a feeling for the different types of reporting with the InfoSet Query you can look at the following documentation:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/a8/2e7237a323427ee10000009b38f8cf/frameset.htm
HR Reporting Tools -> Sap Query -> InfoSet Query -> Calling InfoSet Query.
Or you can book a special training if you need a contact let me know your email adress
Best regards,
Michael

Is it possible to create and save a .PDF without any compression to the resulting .PDF?

I need an uncompressed file so I can use the resulting PDF to do a find/replace. Can't do it with compression.
Thanks
JDRHC1115

Dave,
Thanks for the reply. Of all the suggestions I've received this seemed to
be most promising. I gave it a try and the problem is that when I attempt
to save as optimized a message box pops up and says I have to save my
document first. Low and behold when I save it, compression occurs. Even
when I select the options you suggest I'm left with a compressed document.
I'm using Acrobat Pro X
Jeff
From:   Dave Merchant <[email protected]>
To:     Jeff Ross <[email protected]>
Date:   01/06/2011 09:35 AM
Subject:        Is it possible to create and save a .PDF
without any compression to the resulting .PDF?
You don't want the UncompressPDF plugin - that's designed to split out the
COS objects but doesn't remove the Flate encoding (plus if you've never
compiled a plugin before, it's not really the time to learn).
Instead, simply save your PDF file using the PDF (Optimized) file type,
click the Settings button and under "Clean Up" - "Object compression
options", choose "Remove compression". Turn everything else off if you
want to retain the PDF content exactly as it was before.
Your document-level scripts will then be in the file as plain text.

Create and save a .pdf file

Afternoon! I am creating a pdf utilizing the cfdocument tag and it works great. It opens and displays well. My question is, is there a way to automatically save that generated pdf on the server without opening it? My end goal is to run a scheduled task every week that creates and saves a pdf automatically.

<cfdocument format="pdf" orientation="landscape" filename="YourPDFName.pdf" overwrite="yes">
it will save a copy of the pdf in the same folder as the <cfdocument> is run from, the problem I got is it wond display the pdf at creation time, all that is returned to my screen is the letter "z"
so may be best to fun the code in a loop and one time add in the filename and overwrite paramaters, if you dont need it displayed, then your gold.
Craig Wiseman

I shot a video using my iPad 2, and it is too far away from the subject. How do I zoom in and save the whole video like that? Thanks!

I shot a video using my iPad 2, and it is too far away from the subject. How do I zoom in and save the whole video like that? Thanks!

Sorry to be such a moron with this, but I just don't have much experience with this iPad. I have had it for over a year and I just keep adding stuff to it and it has worked great. Now that the memory is used up, I am trying to figure out how to free up space and not lose what I have paid for.
So, Step 1 is complete, as I have "Transferred" all of the purchases.
What is Step 2? I unchecked the concert on the iTunes library, did a sync, but it's still on my iPad.
Thanks again for the help!!!

Create and save custom transition

Hi, I made a custom transition in FCP using video filters and keyframes and would like to save it to be able to use it again. Is there any way in FCP to create and save transitions? What files actually are the transitions included in FCP?

I did a search and now I know, that the filters and transitions are written in FXScript languge. For those who're interested, there's an official Apple Using FX Script pdf ( http://developer.apple.com/documentation/AppleApplications/Conceptual/Using_FXSc ript/UsingFXScript.pdf ) and a really nice website with FX Script reference - http://www.fxscriptreference.org/ ...

How do I programmatically create and save an empty project?

Similar Messages

Maybe you are looking for