How do I quick look up the date on a photo I have added to a photo project in iPhoto 11? If I hover long enough it sometimes appears.
There has to be a better and more efficient way to do this. This is quite frustrating. I separated all of my "chapters" for my book into different albums but then could only create the book from one of them. So, I took all the photos into an album and am now trying to separate chapters as I create them from scratch in my book project. That aside, it's been troublesome now as well as the past projects on how to quickly display the info (the date mainly) for the images included in the project menu on the right when I click "photos". I do get the info about 60-70% of the time by hovering for a quite lenghty period of time, but this is taking forever. Please.... quick solution! Thanks all!
Thanks Terence. I know about that in iPhoto already. I use it often. However, that is not an option when creating a book. When you click on the photos button in the bottom right corner when creating a book, it shows the photos but there is no "info" selection. The only way I find out the date is to drag the photo into the book, then go back and hover over the page number it was imported to and hope eventually the date shows up. If it's not the date for the chapter I wanted (as my chapters are divided by months), I then drag it back out and try again until I find a photo that does have that date. It's taken hours and is different from previous versions of iPhoto where I have created books before. This is iPhoto 11, trying to create a hard bound book.
Similar Messages
-
How to make users to select the date from calendar control only, by my making the date text field read only (don't want to let users type the date) in date time control in external list in sharepoint 2010. I am looking for a solution which can
be done through sharepoint desginer / out of the box.
thanks.Congratulate you got the solution by yourself. I am new to a
WinForms calendar component, I feel so helpless on many problems even I'd read many tutorials. This question on the
calendar date selection did me a great favor. Cheers. -
How can I get rid of the dates and time on my Notes
How do I get rid of the dates and times on my Notes that appeared when I updated to 8?
Yes, it's seems like a poor design decision.
By putting the date on the line below the Note title in the Notes Index, the app shows half the number of notes per page AND if you have a large number of notes, it takes twice as long to stroll down.
I doubt the designer actually uses the app.
TSAW -
How to get maximal value from the data/class for show in Map legend
I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomouse this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01 -
i subscribed for itunes imatch - it works perfectly on my i-pad and iPhone - however on my macbook - my iTunes can no longer find my songs - i don't know how to make it look to the cloud to play my music - i think it keeps trying to find on the external harddrive where i used to keep my music
Of course iTunes is looking for the music on the external HDD. Enabling iTunes Match does not magically change the location of the iTunes library to the cloud.
To play the music either plug the external HDD back into your computer or create a new, empty library to use for streaming the iTM content. The latter can be accomplished by holding down the Option key when launching iTunes, choosing "create library" then enabling iTunes Match on the new library. DO NOT have iTunes scan your HDD for music. -
I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use? Now my ipad is in recovery mode.
Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.
-
How can I resize and reposition the Date Created window for All windows?
When setting view options for a finder window set to list view, I cannot get column resizing or positioning to hold. When making those changes, the option for "All Windows" automatically shifts to "This window only" and it then does not hold.
How can I resize and reposition the Date Created column for All WIndows?Hi Harmz,
Try dragging this file to the Îesktop & reboot...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist -
How can I install Itunes in the data drive and not in OS partition?
My PC has a 3 partitions and I hace installed Itunes in the OS partition, very small. How can I install Itunes in the data drive?
See Williams Lloyd's post > https://discussions.apple.com/message/15670671#15670671
-
How Sender SOAP Adapter will retriew the data to process further
How Sender SOAP Adapter will receive the data to send the integration server to process further
Hi,
1. All details are always taken from the Sender Agreement.
For the Sender File adapter and the Sender SOAP adapter , the details that include are , Sender Service, Sender Interface Name and namespace and these are the details that make up the SOAP header when the message hits the integration Engine.
Once the corresponding Adapter for the message is identified, ie. the Sender SOAP adapter , the message for the SOAP header is then taken from the Sender Agreement of that adapter. This is the exact reason why one Sender Adapter can be involved in one and only one Sender Agreement.
Regards
Bhavesh -
How many days we can store the data in psa & ods ?
hi guru's
how many days we can store the data in psa & ods ?
Thanks & Regards.
PrabhakarreddyHi Prabhakarreddy,
As many days as you like:
In the PSA you can keep data as long as you like but you will need more and more disk-space. So its advisable to clean up from time to time.
Example:
PSA's from full loads Clean up in a weeks time,
PSA's from Deltas: Clean up after you are sure data is correct. (e.g. a month or 90 days)
Remember that you cannot do a reconstruction from dataloads of which you have deleted the PSA. If some thing is wrong you will have to do an Init again!
In ODS's you must keep data in order to keep your delta loads to cubes in order. Removing data will force you to do a new initial load.
Sometime companies delete old data form ODS's that is older than a certain period (e.g. more than 3 years old) by running a selective deletion. You will have to do an init again. But loads and activation may run faster and of course you gain on disk space.
Udo -
How many years we can store the data in ODS as well as psa data ?
Hi guru's
how many years we can store the data in ODS? can u give particular years ?
how many days we can store the data in psa ? could u tell me step by step procedure ?
Thanks
Reddy prabhaHi Prabhakarreddy,
As many days as you like:
In the PSA you can keep data as long as you like but you will need more and more disk-space. So its advisable to clean up from time to time.
Example:
PSA's from full loads Clean up in a weeks time,
PSA's from Deltas: Clean up after you are sure data is correct. (e.g. a month or 90 days)
Remember that you cannot do a reconstruction from dataloads of which you have deleted the PSA. If some thing is wrong you will have to do an Init again!
In ODS's you must keep data in order to keep your delta loads to cubes in order. Removing data will force you to do a new initial load.
Sometime companies delete old data form ODS's that is older than a certain period (e.g. more than 3 years old) by running a selective deletion. You will have to do an init again. But loads and activation may run faster and of course you gain on disk space.
Udo -
How to put a check with the date
Hi,
I have created a ztable with 3 fields .
clientcode(3),
date,--date geneated
version--- fileversion
i need to update this table everytime i execute the data. Every time version shd get incremented when i execute the program. When i excute the program next day version shd be updated by '1'.
i wrote the code for version updated i'm not getting the logic how to put a check with the date.
SELECT *
FROM zfi_enetflver
INTO TABLE gt_flver.
SORT gt_flver DESCENDING.
CLEAR: gv_dt, v_file.
CONCATENATE sy-datum6(2) sy-datum4(2) INTO gv_dt.
READ TABLE gt_flver WITH KEY client_code = gv_clcd.
IF sy-subrc = 0.
idx = sy-tabix.
IF gt_flver-zdate = ' '.
gt_flver-zdate = sy-datum.
ENDIF.
IF gt_flver-version = ' '.
gt_flver-version = '001'.
gv_filever = gt_flver-version.
MODIFY gt_flver INDEX idx TRANSPORTING zdate version.
MODIFY zfi_enetflver FROM TABLE gt_flver. "TRANSPORTING version.
CONCATENATE 'E:\' 'ENET\' gv_clcd gv_dt '.' gt_flver-version INTO v_file.
ELSE.
gt_flver-version = gt_flver-version + 1.
gv_filever = gt_flver-version.
MODIFY gt_flver INDEX idx TRANSPORTING version.
MODIFY zfi_enetflver FROM TABLE gt_flver .
CONCATENATE 'E:\' 'ENET\' gv_clcd gv_dt '.' gt_flver-version INTO v_file.
ENDIF.
ENDIF.
clientcode is the key field in ztable do i need to make date field key ??
please help me with the logicYou need to implement below logic:
1. check if field_date = sy-datum. in this case do nothing.
2. else . move sy-datum to field_date .
3. modify your internal table with field_date .
4. populate final table to database table .
hope you get it. -
Imoved some e-mailed photos to iphoto, but they come up showing the date in the middle of the image..how do I get rid of the date?
Thhere is no way that iPhoto did that - either source put the data on the photo, you used a photo editor to put it there or the receiving e-mail client is displaying it there - iPhoto has no capability to add any text including dates to a photo
iPhoto will display the date on an event while viewing photos if you have that option set in the preferences
LN -
The data object "FP_FORMOUTPUT" does not have a component called "XML"
Hello All,
When i tried to run a simple report with ADOBE form i got this message:
The data object "FP_FORMOUTPUT" does not have a component called "XML"
I saw that the field XML is really missing in structure fpformoutput!
Also in structure sfpoutputparams the field GETXML is missing!
Is there a note to fix this?
The system status is:
Database system ORACLE
Release 10.2.0.2.0
SAP_BASIS 700 0012 SAPKB70012 SAP Basis Component
SAP_ABA 700 0012 SAPKA70012 Cross-Application Component
ST-PI 2008_1_700 0000 - SAP Solution Tools Plug-In
PI_BASIS 2005_1_700 0012 SAPKIPYJ7C PI_BASIS 2005_1_700
SAP_BW 700 0013 SAPKW70013 SAP NetWeaver BI 7.0
SAP_AP 700 0009 SAPKNA7009 SAP Application Platform
SAP_HR 600 0016 SAPKE60016 Human Resources
SAP_APPL 600 0009 SAPKH60009 Logistics and Accounting
EA-IPPE 400 0009 SAPKGPID09 SAP iPPE
EA-HR 600 0016 SAPKGPHD16 SAP Enterprise Extension HR
EA-GLTRADE 600 0009 SAPKGPGD09 SAP Enterprise Extension Global Trade
EA-PS 600 0009 SAPKGPPD09 SAP Enterprise Extension Public Services
EA-RETAIL 600 0009 SAPKGPRD09 SAP Enterprise Extension Retail
EA-FINSERV 600 0009 SAPKGPFD09 SAP Enterprise Extension Financial Services
EA-DFPS 600 0009 SAPKGPDD09 SAP Enterprise Extension Defense Forces & Public Security
EA-APPL 600 0009 SAPKGPAD09 SAP Enterprise Extension PLM, SCM, Financials
FINBASIS 600 0009 SAPK-60009INFINBASIS Fin. Basis
ECC-DIMP 600 0009 SAPK-60009INECCDIMP DIMP
ERECRUIT 600 0009 SAPK-60009INERECRUIT E-Recruiting
FI-CA 600 0009 SAPK-60009INFICA FI-CA
FI-CAX 600 0009 SAPK-60009INFICAX FI-CA Extended
INSURANCE 600 0009 SAPK-60009ININSURANC SAP Insurance
IS-CWM 600 0009 SAPK-60009INISCWM Industry Solution Catch Weight Management
IS-H 600 0009 SAPK-60009INISH SAP Healthcare
IS-M 600 0009 SAPK-60009INISM SAP MEDIA
IS-OIL 600 0009 SAPK-60009INISOIL IS-OIL
IS-PS-CA 600 0009 SAPK-60009INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT 600 0009 SAPK-60009INISUT SAP Utilities/Telecommunication
LSOFE 600 0009 SAPK-60009INLSOFE SAP Learning Solution Front-End
SEM-BW 600 0009 SAPKGS6009 SEM-BW: Strategic Enterprise Management
ST-A/PI 01L_ECC600 0000 - Application Servicetools for ECC 600
Thank you all In advance,
Eran FOXHello Otto,
Thank you for your reply...
If i enter se11 to see the structure of FPFORMOUTPUT for example... i get the following structure:
PDF FPCONTENT RAWSTRING 0 0 Form Processing: Content from XFT, XFD, PDF, and so on
PDL FPCONTENT RAWSTRING 0 0 Form Processing: Content from XFT, XFD, PDF, and so on
PAGES FPPAGECOUNT INT4 10 0 Form Processing: Number of Pages Created
LANGU LANGU LANG 1 0 Language Key
can you see any XML field here?
This is OLD as you said - but how can i get the proper one?
Thanks again,
Eran -
The data object "T_ACCIT" does not have a component called "XTRNDP"
I am receiving an ABAP dumb following the execution of transaction MIGO (when posting the goods
movement). Attached is a copy of the ABAP dump and below is part of a dev_w log file.
I tried to look at table T_ACCIT in SE16 and I receive the message 'Table T_ACCIT is not active in the Dictionary'.
A Tue May 20 15:19:26 2014
A *GENER* request remote generation: SAPLRWCL.
A
A Tue May 20 15:19:27 2014
A *** ERROR => Syntax error in program SAPLRWCL [abgen.c 1828]
A {root-id=6431504C36361EE3B88A6D67BE3C41DE}_{conn-id=00000000000000000000000000000000}_0
A *** ERROR => > Include FICA_SAPLRWCL=================E line 5 [abgen.c 1830]
A {root-id=6431504C36361EE3B88A6D67BE3C41DE}_{conn-id=00000000000000000000000000000000}_0
A *** ERROR => > The data object "T_ACCIT" does not have a component called "XTRNDP". [abgen.c 1832]
A {root-id=6431504C36361EE3B88A6D67BE3C41DE}_{conn-id=00000000000000000000000000000000}_0
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE entered.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE completed.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
I *** ERROR => SemRel: Inv. Operation. Units 1. Key=51 [semux.c 1393]
I {root-id=6431504C36361EE3B88A6D67BE3C41DE}_{conn-id=00000000000000000000000000000000}_0Hi,
T_ACCIT is a table parameter of a fm and is of structure ACCIT. Also ACCIT can't be found in SE16 but in SE11.
Regards,
Klaus
Maybe you are looking for
-
My sonr prs t1 reader is not supported by digital editions
i recently downloaded digital editions,only tofind that it does not support my sony prs t1 reader.
-
Songs are light grey-Wont transfer to devices
I have numerous songs in my library that have their titles as light gray instead of dark black. These songs will play in itunes on my Mac but will not transfer to any devices. Anybody know a solution? Thanks.
-
How do i delete a Sharethis addon to safari?
I downloaded a ShareThis tool bar from Facebook and now my mail will not forward unless I quit and reload Safari.
-
Aperture Preferences - Mobile Me
For some reason when I selected the MobileMe tab in Apertures Preferences the software hangs (spinning rainbow circle) and I have to force quit. When I relaunch the application and select preferences, it still got MobileMe selected and then hangs wit
-
Kill process and count the number of threads
Hi, I have an RMi Server and it is running perfect, my question is, how can I count how many threads of this server are running, "i.e. If I did run it once or twice or ...", and how to get pid of the process, because I want to restart it after closin