How do I receive TCP data, and forward this data out a UDP socket?

I can receive the TCP data and get it into an
inputStream. I can also create the UDP socket-to
send out a datagram packet.. I'm having a hard time
getting the Input Stream data into a format
acceptable for an UDP socket.That's because you shouldn't and don't and won't be doing that.
TCP is a stream protocol. UDP is a simpler protocol for sending packets. UDP is not suitable for use as a streamed protocol.
If you want streams use TCP.

Similar Messages

Using attribute as a set of data and parsing this data

Hi everyone,
I present below a (little) challenge with the use of attributes in XQuery. Consider the following XML document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Each client of the showroom is identified by a unique Id (e.g., 1,2,3,....). Then, i want to add some data to my XML document which should represent, for each car, the set of all clients' Id that have rented this car.
The desired XML document could look like this:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
+*<history>*+
+*<client id="2"/>*+
+*<client id="23"/>*+
+*</history>*+
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
+*<history>*+
+*<client id="56"/>*+
+*</history>*+
</car>
</showroom>
However, by using elements in order to represent the rental historic, the document's size will increase significantly.
As i use only the clients' id, are there any way to represent the history data using only attributes ?+.
In the following document, the clients' id are represented, as a set, through the attribute +@history+:
<showroom>
<car id="1" history="2,23">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n" history="56">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
However, are there any way to check if a given car of id='x' has been rented by a client of Id='y' ?+.
Does someone know how to represent the history data (sequence of clients' id), using only attributes, and how to look for a given client's id as explained above ?
Please suggest. I appreciate your help.

The two following documents represent examples of the showroom data and the clients' data respectively:
First document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Second document:
<clients>
<client id="2">
<name>...</name>
<firstname>...</firstname>
<driverLicence serialNumber="2156311"/>
</client>
</clients>
The DTDs of these documents are defined as follows:
The showroom DTD:
<!ELEMENT showroom (car)*>
<!ELEMENT car (name,family)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT family (#PCDATA)>
<!ELEMENT N3 (#PCDATA)>
<!ATTLIST car id ID #REQUIRED>
The clients DTD:
<!ELEMENT clients (client)*>
<!ELEMENT client (name,firstname,driverLicence)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT firstname (#PCDATA)>
<!ELEMENT driverLicence EMPTY>
<!ATTLIST client id ID #REQUIRED>
<!ATTLIST driverLicence serialNumber ID #REQUIRED>
Whenever a car is rented, I must add some information either in the same showroom document (it will be better for me) or in another document which relies rented car id with the id of the client which rented this car.
Thanks in advance for your help.

How do I Configure my Router to forward incoming data for port x ???

How do I configure my router to forward incoming data for port whatever?
I need this for my video games.

Depending on which router you have look under Gaming and Applications or system management for a Forwarding tab. From there you select (or create) the port needed for your game with the IP address to the PC with the games you are using. You may also have to configure Port Triggering for that game/port range/and IP to the hosting PC.
Richard Aichner (Ikester)

How to stop scheduled ship date and scheduled arrival date from defaulting to sysdate

Hello,
We have a business scenario where we are deriving scheduled ship date and scheduled arrival date outside and then imported in the instance with the order. However we find that the scheduled ship date and scheduled arrival date are defaulting to sysdate. The atp flag is set to N for these items. I have checked the defaulting rules, there is no such defaulting rule set for scheduled ship date or arrival date ( screenshot attached) Please share your thoughts on how can I stop scheduled ship date and arrival date date from defaulting to sysdate ?
Thanks
Rajesh

Hi
Please visit following link. It may be useful.
How to prevent auto default of schedule ship date in sales order form
HTH
sd

How to display planned movement date and actual movement date together?

Hi, Professionals,
My purpose is to list delayed outbound deliveries.
Anyone could tell me how to display planned movement date and actual movement date?
Appreciate your help.

Thanks Shiva.
I tried another way to do it. It works only for a short period of time.
By using VL06O, I list all outbound deliveries by limiting both planned goods movement dates and actual goods movements dates to the same week I would like to inspect. Say both from 7th/11 to 14th/11.
then I list outbound delivery list with planned goods movement date to 7th/11 but left out actual goods movements dates this time.
In excel, I compare those two lists and filter out those unique ones because those unique documents means delayed deliveries which cannot delivery according to planned date.
However, the "delayed" list generated by this method has some noises. Not all of documents are really delayed although most of them do.
I'm also looking for a way to list sales documents number of these delayed delivery documents so i can retrieve order details from it such as order value.
Help still needed.

How can we delete SID table data and Text table data

Hi,
How can we delete SID table data and Text table data of any
InfoObject.

Hi,
Go to transaction SE14, give the technical name if the table:
/BIC/T<InfoObject Name> for Text Table
/BIC/S<InfoObject Name> for SID Table
Select "Table" in the given 4 options below & hit Edit button.
in the next screen select "Direct"
& also select "detele data" radio button.
& hit "Activate & adjust database".
this will delete the complete data from the tables.
Note: before deleting the SID's make sure of the consequences & after effects.
Also the SID gets generated the next time you load master data/transaction data only for those records which were loaded..
Regards,
Iliyas

HT2518 I migrated from a PC to a Mac Book Pro. The contacts transferred over to the Mac along with many contacts that I had deleted sometime ago. Also some contacts did not transfer at all. How can I perform a correct and up to date migration of my cont

I migrated from a PC to a Mac Book Pro. The contacts transferred over to the Mac along with many contacts that I had deleted sometime ago. Also some contacts did not transfer at all. How can I perform a correct and up to date migration of my contacts?

well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed.

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

Yes, you can.
This is a special feature of the AirPort Express 802.11n. You will have to set it up "manually" to "enable Ethernet clients".
If your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

Month to Date and Year to Date Scenarios

<b>Dear SAP BI Gurus,
Can anyone please give me guidance how to create a Month to Date and Year To Date Scenarios (Variables perhaps?) for 0SRR_CF_C1? The date is in decimal and not DATE format Im assuming the reason for this is to get the Time variance. Nonetheless, Id like to create a MTD and YTD scenario for reporting.
Much Thanks
Philips Manalaysay</b>

Hi,
You should take a look at the blog and doc below.
/people/vikash.agrawal/blog/2006/10/17/enable-trend-reporting-150-by-manipulating-variable-value
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Regards,

Process Order Basic Finish Date and Scheduled Finish Date

Folks,
I have a requirement from the business to be able to update the Process Order Basic Finish Date and Scheduled Finish Date independently from each other.
In other words, update the Basic Finish Date and the Scheduled Finish Date cannot change or update the Scheduled Finish Date and the Basic Finish Date cannot change.
I believe the reason for this is to be able to use the Basic Date to maintain the ATP accurately and keep the Scheduled Date to mark when the order was originally due from the shop floor to be able to measure if orders are being completed on time or late.
I have worked in tnx OPUZ and had some success with other issues with these dates but I can't seem to make them work independently from each other.
Or does anyone have any ideas how to measure proces order performance to the production schedule?
Thank you for your help,
Greg

Rajesha, thank you for your reply but it doesn't solve my problem.
Let me restate my scenario:
I start a process order and both the basic and scheduled finish dates are the same, June 1.
At some point, shop floor tells me they will be late and cannot deliver until June 15.
I need to update a date in the system so the ATP and the MRP planning runs have correct information for promising customers, I will update the Basic Finish date with June 15.
I also need to keep the original June 1 date in order to measure the shop floor performance to the production schedule to measure how early or late the order was delivered. How can I keep the original finish date or how can I measure if a process order is early or late??
Thank you for your help,
Greg

Firefox 8 and 9beta. Back and Forward buttons greyed out. Right click menu also has forward and back greyed out. Updated all plugins, then disabled all plugins and extensions and started in safe mode. No change.

My forward and back buttons are greyed out after update to Firefox 8. Tried to move to 9 beta, but same behavior. Back and Forward also greyed out in right click menu.
Attempted to fix by updating all plugins and extensions, then disabled all plugins and extensions, and then tried to start in safe mode. Nothing worked.

You could have backed up your profile folder. If you did, [[Recovering important data from an old profile]] can help :)

Basic Start Date and Schedule Start date

Dear All,
In a Preventive Maintenance order generated through IP30, I am getting Basic Start Date and Schedule Start date as different dates. For all other orders those date as coming same. I am using forward Scheduling. Can any one of you please tell me what would be the problem?
Regards,
Babu R

[SAP Note on Scheduling - Note 45433|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=45433]
Regards,
Maheswaran.

Java.sql.Date and java.util.Date - class loaded first in the classpath

I had two jar files which has java.util.Date and java.sql.Date class file. i want to know whether which class is loaded first in the classpath...
I like to change the order of loading the class at runtime...
Is there is any way to change the order of loading of class...
I may have different version of jar files for example xerces,xercesImpl. some of the code uses xerces ,some of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according to the order i need..
Can we do all these in Run time ?????

I had two jar files which has java.util.Date and
java.sql.Date class file. i want to know whether
which class is loaded first in the classpath...
I like to change the order of loading the class at
runtime...
Is there is any way to change the order of loading of
class...
I may have different version of jar files for example
xerces,xercesImpl. some of the code uses xerces ,some
of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according
to the order i need..
Can we do all these in Run time ?????That is meaningless.
The classes you are referring to are part of the Java API. Third party jars have no impact on that. And you can't change to the order because java.sql.Data is derived from java.util.Date. So the second must load before the first.
And if you have two jar files with those classes in them (and not classes that use them) then you either should already know how to use them or you should stop trying to do whatever you are doing because it isn't going to work.

Billing document date and accounting document date varying...

Hello Experts,
There is one billing document and the date of invoice is, say today, 12/01/2009. and the accounting document date is, say 15 days ahead or behind, 27/01/2009.however, the posting date is proper and according to the billing date and that is again dated today-12/01/209. Now, the user wants to know why the difference exists between the accounting document date and the billing date. any idea? there are some user exits being used but I cant make out, neither the abaper. suggestions please.
Regards,
N.Raja Sekhar.

Dear Raja Sekhar
Document date is nothing but the date on which that particular transaction has taken place. But I dont know where you get the date as 27-01-2009.
It is a general practice that for exports billing document, there would be a Posting block and once the exporter receives the B/L, based on that date, the billing document would be released manually. For this, there is an user exit to input the B/L number and date and release the billing document.
So here, what the end users normally does is that the B/L Date might be on 02-01-2009 but he would not have updated on the same date. At a later date, say on 12-01-2009, he can input the B/L Date (in another words, it is Posting date) as 02-01-09 and execute the billing document.
If you see the accounting document here, the posting date would have been 02-01-2009 but the document date would be 12-01-09.
thanks
G. Lakshmipathi

Last GR date and lat GI date to be developed in the report

HI,
I want last GR date and last GI date to be developed in the report. I wl take the data from CKM3N.
Is there any easy way how to go about it?
Regards,

Hi there
1. Last GR date,If the material is a Batch amanged material you can get the last Gr date from the Table: MCHA-(Field) LWEDT..
if the material is not batch manged,, Hope we can ref the MSEG based on the Movement types( Inward )/Material/Plant/Location for the last GR..
2. For the last GI date- Same we can ref the MSEG based on the Movement types( Outward )/Material/Plant/Location for the last GI..
Hope it helps,,
Thanks
Senthil

How do I receive TCP data, and forward this data out a UDP socket?

Similar Messages

Maybe you are looking for