How do i reinstall AT&T Communications Manager?

I recently bought the Nokie Booklet, yesterday in fact. And i also purchased Windows 7 Home premium. Not knowing that there wasn't a CD tray on the MINI, i donwloaded it to my desktop and then uploaded it do a flash drive. I installed it on my Booklet and now the internet doesn't work. To help myself, i have already went into "Windows.Old" I get this error message.
"C:\Windows.Old\Program Files\AT&T\Communication Manager\ATTCM.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail."
I do realize that the program came with Windows 7 Starter, but that shouldn't mean it doesn't work for a later edition of Windows 7 does it? Yes, i have already tried to restore settings to factory default. And system recovery, it doesn't work because i haven't set any recover time before hand. So is there a way to get the new ATTCM.exe? All help appreciated.
- Austin
P.S How do i connect the internet from my desktop to my laptop, is it manditory that i use an Ethernet-to-USB adapter?

There is a partition on the HDD that is the factory restore. You can restore the booklet to factory unless you did a clean install and wiped out the partition. When it's booting up press F8, and repair.

Similar Messages

How to migrate from BE6000 to Communications Manager

Dear forum members,
first of all, I'am tired. I have been on a long journey from the day we bought our Cisco Unified Communication system until now.
Technically everything worked just fine, right from the beginning until now. But starting from the first day, I had several huge
issues with our Cisco reseller (Deutsche Telekom/T-Systems).
It all started with the fact, that all hardware related contracts and services were SmartNet Services and added directly to our company account.
All software related services were booked as "Shared Services". So we were the rightfull owner of the licenses but our reseller had to migrate/issue all tickets, licensing requests and so on.
It took us (me and our reseller) over a year to set these things "right".
Right now, everything (hardware and software related services, licenses, ...) are bound to our Cisco account. We can open TAC cases, download software/firmware and so on.
Last week, we migrated successfully from Call Manager 8.6.5 to 10.0. So I was really happy to see, that everything worked fine (I could migrate my licenses, download the software, ...).
I thought, "Hey, finally eveything works as expected..."
I was wrong, so wrong...
What happend? I tell you what happend...
During the migration, we had to move all our servers (CUCM, CUC & CUPS) from our Cisco C200 M2 Server to our Dell VMware cluster, because the C200 M2 is (as far as I know) not supported anymore for BE6000 10.x and we didn't wand to buy a new C220 M3 server.
Due to the fact, that the BE6000 is only supported on that hardware, we decided to migrate our BE6000 to a Cisco Unified Communications Manager.
Our reseller told me, that Cisco Unified Communications Manager is supported on third party hardware (if the hardware meets certain requirements, like processors and so on) and due to the fact that we only use CUCM, CUC & CUPS there would be no difference for us when it comes to features.
So I said: Great, let's do that. And when you are doing that, can you please order us a license for a collab edge gateway (the thing that enables Jabber to proxy through the firewall without the need of a vpn tunnel).
And that was the point when our communication stucked...
Since that mail, I don't get any response from our reseller regarding this two tasks. They told me, that I can do that myself. I tried that and searched all cisco portals and then opended a TAC case.
The TAC team told me, that our reseller had to file a sales order (is that right?) and send me back to them.
Right now, I'am trapped between Cisco and my reseller and I'am really tired. Can someone please tell me what I can do/have to do to patch things up?
Kind regards,
René

DRS from your current server which is using the 6K OVAs, into your dell server which should NOT be using the 6K OVAS, but any of the other non-6K options you have.
I assume you've already verified your server is supported under 3rd party spec guidelines???
But, that's all it takes to move from a 6K into an enterprise CUCM, or the other way around as well.

How do I Reinstall Application from Application Manager After Restoring Computer?

Hi
After restoring my computer I lost the Abobe creative Cloud applications that I previous installed on my computer. Now, It is impossible to reinstall. The link "inatall" is not showing anymore. Instead it says "up to date" although the sotfware was removed during the restoration.
Thanks

Decelermont please see Creative Cloud AAM lists Applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to resolve your current difficulties.

Problem in Cisco Unified IP Phone 8961: How to register in Cisco Unified Communications Manager 7.1.(3)

Hi,
I am trying to register our 8961 Cisco IP Phone to register to the CUCM 7.1.3 but it doesn't seem to appear in the list of the phones supported. Upon further research, we found out that it is actually a SIP Phone. We tried registering it as a SIP Phone, however we cannot find any user/password field in the phone itself.
I hope anyone can help out.

You may need to download latest device pack for version 7.1.3:
cmterm-devicepack7.1.3.33031-1.cop.sgn
http://software.cisco.com/download/release.html?mdfid=282421166&flowid=5328&softwareid=282074299&release=7.1(5.36121)&relind=AVAILABLE&rellifecycle=&reltype=latest
HTH, please rate all useful posts!
Chris

AT&T Communications Manager reinstall problem

I'm running a MacBook Air with OS X 10.8.1. I bought an AT&T USBConnect Force 4G, and the AT&T Communications Manager software installed correctly when the device was connected. After installation Communications Manager wanted to update and I let it, and the update failed. So, I tried to uninstall Communications Manager by dragging it to the trashcan (I'm fairly new to the Mac community and, silly me, trusted AT&T to write a proper Mac program to uninstall this way!) As it turns out, AT&T says one must use the Communication Manager uninstaller or files will be left behind. Ok, Ok, I didn't read that instruction and I screwed up. I get that.
Problem is, I cannot reinstall the AT&T Communications Manager software. When I try to reinstall, the program says it can't install because there's a newer version of the Communications Manager already present. I cannot find the files I need to delete--as I said, I'm a fairly recent convert to Mac, and I don't really know how to navigate around in the OS X file system very well. I tried Time Machine but that didn't work.
Please advise as to how I would locate the files I need to delete...
Thanks much,
Roger

metcalfdds wrote:
I'm running a MacBook Air with OS X 10.8.1. I bought an AT&T USBConnect Force 4G, and the AT&T Communications Manager software installed correctly when the device was connected. After installation Communications Manager wanted to update and I let it, and the update failed. So, I tried to uninstall Communications Manager by dragging it to the trashcan (I'm fairly new to the Mac community and, silly me, trusted AT&T to write a proper Mac program to uninstall this way!) As it turns out, AT&T says one must use the Communication Manager uninstaller or files will be left behind. Ok, Ok, I didn't read that instruction and I screwed up. I get that.
Problem is, I cannot reinstall the AT&T Communications Manager software. When I try to reinstall, the program says it can't install because there's a newer version of the Communications Manager already present. I cannot find the files I need to delete--as I said, I'm a fairly recent convert to Mac, and I don't really know how to navigate around in the OS X file system very well. I tried Time Machine but that didn't work.
Please advise as to how I would locate the files I need to delete...
Thanks much,
Roger
Well, my experience with T-mobile and Verizon WWAN installers finds that they splatter stuff all over the system including kernel device drivers. Sounds like at&t is no different. Simply dragging the visual application icon to the trash never completely uninstalls this crud.
I use a Mac application called Pacifist developed by CharlesSoft dot com. It is $20 shareware that also has a countdown try button. It installs in /Applications and launches as a graphical tool. Drag the original at&t installer onto Pacifist and it will then present a hierarchy of the installation file names and locations. Once you have this detective information, you can surgically remove the indicated files from your system.
Your are new to the Mac community. Are you new to the UNIX terminal command line? If yes, then you should allow someone else more experienced with the terminal interface to follow the above approach, because one wrong move with terminal file removal and you could find yourself re-installing OS X. Also, if TimeMachine has been backing up your entire system, you have this undesireable installation in your back-ups. A wrong restore could re-create your problems.

How do I reinstall Adobe Application Manager

My Adobe Application Manager would not allow me to open and use Adobe Acrobat Pro. In playing around with it I removed the Application Manager from my Utilities File. I cannot put it back. How do I reinstall Adobe Application Manager on my iMac?

You can reinstall the Adobe Application Manager using this link http://www.adobe.com/applicationmanagerpatch/index.html.

VBAI Development Toolkit, Custom Plugin: How to get TCP data / connection ID configured in VBAI Communication Manager?

Hello,
I would like to create a custom plugin using the VBAI Dev. Toolkit. I'm using VBAI 2010 with LabView 2010.
In this step I would like to send a TCP message over a TCP connection defined in VBAI Communication Manager. How can I get the open Connection ID? Or do I have to open the connection in the Plugin? In this case, how to get the defined TCP data from the Communication Manager?
Thanks for your help.
Best regards,
Yellow

Yes you could. You can even create a simple VBAI inspection that uses the TCP step and then migrate it to LabVIEW to see how VBAI opens the connection and uses it in the TCP step. It may be more involved if you want to allow the user to configure all the TCP settings (IP Address/port) and have all your custom steps use the same settings (maybe save them to an INI and have all steps use the same INI to get the settings).
Hope this helps,
Brad

Payment Rule maintenance per currency in Bank Communication Management

Hi,
We have maintained Rules for Payment Grouping in Bank Communication Management based on amount limits. The basic currency we expected is GBP so we have the same set of amount limits for all Company Codes until now.
We've now introduced a new Company Code which makes payments in USD. We'd like the same amount limits to be used for payments from this Company Code too.
Eg: We have a rule for amount range from 100K to 150K. If the payment is in GBP the rule gets picked up if the payment amount is between 100K GBP and 150K GBP.
Now if a USD payment is made of 130K USD, the above rule gets picked up. We would like to see that the GBP equivalent of 130K USD... i.e. 205K USD is considered as the amount and a suitable rule is picked up.
How do we achieve this in the rule definitions? I see that the Currency field limits the rule to be considered only for payments made in one currency. Is there a way of associating the amount limits to a base currency so that other currency payments will get converted against this currency and be evaluated?
Would appreciate any help in this regard as we're at a loss currently.
Thanks in advance.
Madhu

HI
Can you verify your payment run log? are there any payments available or not
Reg
Vishnu

How do I tell the CC application manager that Lightroom is not installed on my pc?

Before i got CC i was using Lightroom 5 swedish version for evaluation. I used application manager to install an English version by setting the language to English but language after CC installation of Lightroom is still Swedish. Checking the language settings again after installation it was set to English. Now I uninstalled Lightroom using control panel to remove it completely and my intention was to reinstall it from CC. However, the application manager still claims that Lightroom is installed. How do I get the CC application manager to understand that lightroom is not installed and when I do reinstall it it should be in English?
Win 7 Home Premium 64-bit PC, CC Version 1.0.2.189

Hi adogool,
Please try to perform the steps given in the follwoing article.
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

How do you reinstall elements 12 in windows 7 ?

My elements 12 program is corrupt how do I reinstall the program

Press Ctrl+Alt+Del and go to Task Manager
Select the Applications tab. If Elements is still shown as running, highlight and click End Task to force quit.
You can use the link below to download PSE12 if you have your product serial number. It’s probably best to uninstall first by going to the Windows Control Panel.
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

How do I reinstall an "Up-to-date" application in Creative Cloud

I recently switched to a new Mac. My Creative Cloud applications all migrated fine, except Dreamweaver. On opening it, I gewt an error. I assume I just need to reinstall it, but when I go to the Application Manager, it says Dreamweaver is Up to date. How do I reinstall the application from Creative Cloud?

Run the Creative Suite Cleaner Tool, let AAM reinstall.
Mylenium

Bank Communication Management - Incoming messages from Banks

Hi,
We are using Bank communication management. When we send our ACH and Wire files to the bank, the bank sends two confirmations: 1. First confirmation says that the file is received. 2. Second confirmation sends the total number of items and total amount in the payment file.
I have done the necessary configuration in BCM in the step shown below:
Financial Supply Chain Management ® Bank Communication Management ® Payment Status Management ® Map External Status to Internal Status
How do I update this in the payment monitor (T-CODE - BNK_MONI)?
SAP says
You must connect the XI system to the ERP system. The interface Collective Payment Order Notification must be set up. What is this interface 'Collective payment order notification' and where should I set it up?
Any help in this regard is greatly appreciated.
Kalyan

Hi Ankish,
As mentioned by Kalyan above (check suggestions from SAP in his comment), you should use the interface Collective Payment Order Notification given by SAP in ESR (Enterprise Service Repository) SAP APPL (SAP APPL 6.05). If your PI environment doesnot have it then you need to request yuor basis to download this from SAP.
After you download the ESR , you can find the standard Service interface called "CollectivePaymentOrderNotification_In" under Namespace http://sap.com/xi/APPL/Global2 .
Now once you have this interface downloaded, create a new message mapping using the message Type "CollectivePaymentOrderNotification_async" as Target, and your message from BANK or SWIFT (uploaded into PI as external definition) as source. Map the required fields , mainly map the external status code from BANK to ExecutionStatusCode field. Also map the required header fields.
Once you create the new mapping , create required Integration builder objects and you are all set.
The CollectivePaymentOrderNotification interface is proxy in ECC which has required methods to update the BCM with the status.
Also please check below links for more information.
http://help.sap.com/esoa_erp2005_ehp2/helpdata/en/46/802b59e186429ee10000000a1553f7/content.htm
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/22/e-payment-a-customized-solution-other-than-sap-integration-package-swift-part-3-receive-from-bank-push-to-sap-bcm
Regards,
Suresh

PC Suite Communications Manager Blank Messages

Hi,
I am using Windows XP SP3 with PC Suite 7.1.30.8. I am connecting to my Nokia 5310 through Bluetooth.
When I use the communications manager in PC suite to check on the SMSes on my phone, I see 5 blank messages. No matter how I try to delete these messages thru PC Suite, they always show up again when I sync. However on my phone itself, these blank message do hot show up. Example: I see 10 regular SMS and 5 blank SMS in PC suite, but when I access SMS directly on my phone, I only see the 10 regular SMS but not the 5 blank SMS.
Any way I can delete these blank SMSes?
Thanks

Hi,
You can also check the following post, if it could help you
/discussions/board/message?board.id=pcsuite&thread.id=36027

Adapter for Avaya communication manager

Hi Everyone,
Can anyone help me with the connector for Avaya communication manager?
I am confused which jar to use for Avaya communication manager and how to create the configuration file(XML) file for that,i mean fields that are required in XML file?
I have worked on the configuration of Sun java directory server with OIM.
Thanks in advance.
Satbir.

Did you add Avaya Session Manager as a PSTN gateway in Lync Topology?
Did you create dial plan and related normalization rule for extension in Avaya telephone system.
Which guide did you use to integrate Avaya Aura Session Manager with Lync Server?
You can check the following deployment guide:
http://www.microsoft.com/en-hk/download/details.aspx?id=41152
Lisa Zheng
TechNet Community Support

How do i reinstall AT&T Communications Manager?

Similar Messages

Maybe you are looking for