How do I report errors in an beta release?

I signed up to V28 beta to help find errors etc. I am now finding a number of problems which may or may mot be caused by V20. I have wasted much of my evening trying to get into the system, eventually successfully. Problems I am having are:
1) constant logging in to gmail every time I go to a new page (e.g. going from inbox to spam).
2) being asked (when 1) does not apply) to select leave page or stay on the page.
I appreciate that these could be a Google problem.
3) After logging into a site, being logged out again as soon as I try to do anything there
4) on the Mozilla site, trying to leave feedback, clicking on one of the two smiley/grumpy faces the message input window comes up and reverts back to the faces page in less than a second.
All the above have been going on for a while, as has the gradual gobbling up of memory and shutdown lasting up to 10 minutes (to be investigated as they may be an add-on. A new problem is with FF just closing with no warning. Usually this has been accompanied with the send report window, and rerunning the program has come up with the restore option. However, lately the crash is not reported and restarting the program just brings up the home page. Fortunately I have Session Manager so I can recover some of my open tabs but with up to over 200 tabs coming and going it can be well out of date.
That's it really. Do I go back to V27, or is there a way to get round these latest type of crashes?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Similar Messages

Im currently running Yosemite Beta 10.10, how do i upgrade to a non beta release of yosemite?

Im currently running Yosemite Beta 10.10, how do i upgrade to a non beta release of yosemite? downloading yosemite in the app store doesn't work, i get a box that say my purchase couldn't be completed at this time. what can i do?

This seems very odd that they would completely make an entire OS X release not available at all. This is also unfortunate because some of the software use has compatibility issues with Yosemite. Thanks for the responses I will contact my local retail store and post back if they give me more information or a solution.

How to hide report errors when user input incorrect?

I have a tabular report with output that's limited on date interval basis in the WHERE clause. So I have two date items that's used to set start and end dates accordingly. Both items have validations "Item specified is a valid date". How to hide error in report area when validation fires?
screenshot http://ehype.com.ru/tmp/rep_error.jpg

Have you tried putting a condition on the report region of type "No Inline Validation Errors Displayed"?
Scott

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to remove Fatal Error in Reports 3.0

How to eliminate Fatal Error in the Reports,
I created Formula column and in that i am writing query for
retreiving values and storing that value in other variable which
i declared in the formula columns PL/SQL and in that I didn't
find any compilation errors but when i run the report i am
getting the fatal error. Please give me the solution for that
fatal error.

Hi ,
first goto the properties sheet of formula column.
in the properties sheet
increse the widht property by 200.
still u have the same problem again increase by 100.
repeat like that.
at certain level u r error fixed.
bye
srini

How do I resolve error 1310 while installing crystal report version for visual studio 2010.

How do I resolve error 1310. I try to install crystal version for visual studio 2010, but I got this error message. Error 1310. Error writing to file. mcf80.dll.verify that you have access to that directory. My pc is window 7 (32 bit). Please I need help
urgently to work with this program in my system successfully. Please help.

Hello Dorohidea,
Do you mean that when you install crystal report in virtual studio 2010, you receive the error message about error 1310?
Please take a look at the following KB.
Support for Crystal Reports for Visual Studio
https://support.microsoft.com/kb/317789/en-us
In Visual Studio 2010, to create a Crystal Reports project or Web site or to import existing projects or Web sites that were created by using older versions of Visual Studio or Crystal Reports, you must first install a version of Crystal Reports that is
compatible with Visual Studio 2010.
For more information about how to use Crystal Reports in Visual Studio 2010, visit the following SAP Crystal Reports website:
http://www.sap.com/crystalreports/vs2010
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How can I report an error in the French interface of FCP X ?

Hello All,
I'm building an EXCEL shortcuts sheet for FCP X 10.0.7 Fr and discovered a few errors in the translation.
How can I report them to Apple Localization Engineering, pls?
Thanks.

http://www.apple.com/feedback/finalcutpro.html

HOW CAN I AN ERROR FROM A REPORT ON A WEB

I HAVE AN FORM THAT LAUNCH A REPORT BUT WHEN I RUN THE REPORT,THE REPORT END WITH "TERMINATED WITH ERROR", MY QUESTION
HOW CAN I SEE MORE INFORMATION ABOUT THE REPORT ERROR?
tHANKS

Turn on reports server tracing. In the trace file, you will see a lot of information.
You can also use /reports/rwservlet/showjobs command to see the error message related to the job that was sent from Forms.
Thanks,
-Shaun

How can we transfer error report

Hi!
experts,
how can we transfer error report from a BAPI to the application server? as i am collecting the error report from the BAPI ?

You can use the following code in your program for your ref:
REPORT ZEX_DATATOFILE .
*& ABAPLOVERS: Data Transfer
Parameters to enter the path
PARAMETERS FILENAME(128) DEFAULT '/usr/tmp/testfile.dat'
                         LOWER CASE.
Table Declaration
DATA: it_return type table of BAPIRET2.
Data Declaration
DATA D_MSG_TEXT(50).
populate DOCUMENTHEADER and pass to BAPI
*You can call your Bapi here *
CALL FUNCTION 'BAPI_ACC_GL_POSTING_POST'
EXPORTING
    documentheader       = <header>
IMPORTING
OBJ_TYPE             =
OBJ_KEY              =
OBJ_SYS              =
tables
    accountgl            =
    currencyamount       =
    return               = it_return
EXTENSION1           =
collect all the logs in one internal table
ENDLOOP.
Opening the File
OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE
                      MESSAGE D_MSG_TEXT.
IF SY-SUBRC NE 0.
WRITE: 'File cannot be opened. Reason:', D_MSG_TEXT.
EXIT.
ENDIF.
Transferring Data
LOOP AT it_return to wa_return .
TRANSFER wa_return TO FILENAME.
ENDLOOP.
Closing the File
CLOSE DATASET FILENAME.
Regards
Dhirendra
Edited by: dhirendra pandit on Jul 7, 2009 1:55 PM

[svn] 1608: This checkin makes public our modifications to Batik, which improve how the MXML compiler reports errors in CSS syntax.

Revision: 1608
Author: [email protected]
Date: 2008-05-07 17:36:02 -0700 (Wed, 07 May 2008)
Log Message:
This checkin makes public our modifications to Batik, which improve how the MXML compiler reports errors in CSS syntax.
Bugs: -
QA: No
Doc: No
Reviewer: Jono
Modified Paths:
flex/sdk/trunk/modules/thirdparty/batik/resources/org/apache/batik/css/parser/resources/M essages.properties
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/AbstractDesce ndantSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/AbstractEleme ntSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/AbstractSibli ngSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/CSSLexicalUni t.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/DefaultCondit ionalSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/DefaultElemen tSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/ParseExceptio n.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/Parser.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/Scanner.java
Added Paths:
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/AbstractSelec tor.java

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

HT5973 Maps has errors in it. It shows my subdivision with all of the houses, but shows the streets and street names in the middle of a field about a mile down the road. How do I report this to get it fixed.

How do I get errors in Maps corrected? It shows the subdivision I live in, The streets and houses are in the correct place, however it does not name the streets. It then shows the correct street names in the middle of a field about a mile down the street from my subdivision.

Similar issues here.
I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

Jasper Reports Integration - beta release

Hi guys,
I have finally found the time to release the Jasper Reports Integration package for producing print ready reports.
You can find all the details here: http://daust.blogspot.com/2010/01/jasper-reports-integration-beta-release.html
Anybody is welcome to try the software and join the beta program.
Thanks,
~Dietmar.

Hi Wolfgang,
Now it works as expected!That's the way I like it ;).
I would like to save the report in a user table with a blob field, how can this be achieved?Easy, this is even already part of the test application.
On the Report Tester tab you will find a button called "Get report as BLOB, then display". It calls the following page process:
DECLARE
   l_blob        BLOB;
   l_mime_type   VARCHAR2 (100);
BEGIN
   xlog ('PRC_GET_REPORT_TUNNEL', 'url (orig):' || :p5_report_url);
   -- generate the report and return in BLOB
   xlib_jasperreports.set_report_url (:p5_jasper_report_url);
   xlib_jasperreports.get_report
                                (p_rep_name               => :p5_rep_name,
                                 p_rep_format             => :p5_rep_format,
                                 p_data_source            => :p5_data_source,
                                 p_rep_locale             => :p5_rep_locale,
                                 p_rep_encoding           => :p5_rep_encoding,
                                 p_additional_params      => :p5_additional_params,
                                 p_out_blob               => l_blob,
                                 p_out_mime_type          => l_mime_type
   -- set mime header
   OWA_UTIL.mime_header (ccontent_type      => l_mime_type,
                         bclose_header      => FALSE);
   -- set content length
   HTP.p ('Content-length: ' || DBMS_LOB.getlength (l_blob));
   OWA_UTIL.http_header_close;
   -- download the file and display in browser
   WPG_DOCLOAD.download_file (l_blob);
   -- release resources
   DBMS_LOB.freetemporary (l_blob);
   -- stop rendering of APEX page
   apex_application.g_unrecoverable_error := TRUE;
EXCEPTION
   WHEN OTHERS
   THEN
      xlog ('PRC_GET_REPORT_TUNNEL', SQLERRM, 'ERROR');
      RAISE;
END;Once you have the blob you can store it in a database table, done!
There is only one tricky part. Should the Tomcat throw an exception then it will return a html error page (http code 200=ok). The request is perfectly valid but a human can see the error message.
The API should throw an exception on that. A bit tricky once other J2EE servers are supported or the error messages vary.
BTW: do you plan any additional features ?Perhaps, what are you looking for?
Cheers,
~Dietmar.

DW reporting error line 9 and 10

Hi everything this site www.geekstotherescue.com.au was all
good to go until I input the keywords client sent me. then
Dreamweaver reported error (underlined lines 9 and 10 in red) I can
not figure out what caused this error. i do not have access to IE6
can someone check the site in IE 6 and let me know if it looks ok
and how I can fix the error?
thanks
Shontelle

> 2. Murray: when i hover over the the red underline it
says not suporrted
> in
> IE5.5 and IE 6.
So - there's your answer, then. Open the CSS file and see
what is redlined
there.
> I have heard that kewyords are not very effective
anymore but
> my clients seem to want them in I was taking the "the
having them in
> won't
> hurt approach" but perhaps i am better off just telling
my clients not to
> bother???
It's really up to you, but I do the "not to bother" part.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"shonts" <[email protected]> wrote in
message
news:fcplll$o8q$[email protected]..
> Hi thanks for ypur replies.
> 1. Peter: i should have checked validation before
positng here. I will
> fix
> the errors now. thanks
> 2. Murray: when i hover over the the red underline it
says not suporrted
> in
> IE5.5 and IE 6. I have heard that kewyords are not very
effective anymore
> but
> my clients seem to want them in I was taking the "the
having them in
> won't
> hurt approach" but perhaps i am better off just telling
my clients not to
> bother???
>
> regards,
>
> Shontelle
>

Report error:ORA-06502: PL/SQL: numeric or value error: character to number

The oracle application express environment is created by installing the HTTP Server on the windows server and the application express 3.2.1 components on the 11.1.0.7 oracle database on UNIX. The installation is successfully and have not seen any issues during the installation. After completing all the steps, when tried to login and click the application builder or workspace components, I see the error message
report error:ORA-06502: PL/SQL: numeric or value error: character to number.
This error message is seen on most of the pages when trying to accessed and not able to understand the reasons behind it. Its a brand new environment setup and not even presented to developers to test it.
Below error message is always seen when trying to access most of the components like application builder, schema comparison and some other tabs. Please advice
report error:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Edited by: user589320 on Jun 9, 2011 5:17 PM

I think its better you use APEX 4.x version ratherthan using old version.
You will get more features and some bug fixes and also it's easy for you to get some help when you need.
* If this answer is helpfull or correct then please mark it and grant the points.

How do I report errors in an beta release?

Similar Messages

Maybe you are looking for