How do I reset controls and continue or reset controls and stop?

I am trying to find a way to reset 16 controls and 8 indicators and continue or exit.
I have a system where a change in input will cause the LabVIEW to contact another processor via RS232 and send the change. There are eight seperate circuits to control and each has an enable and voltage input. I have the individual circuits operation with a change of either input but when I try to reset all 16 inputs and 16 indicators then continue or reset the inputs and indicators and stop (I need to do both) the system hangs up. In the debug (light bulb on) mode the system works but normal operation the system hangs up.
I have attached the VI's for this system.
Attachments:
event_10_28_04.vi ‏230 KB
Diode_Ctrl_2.vi ‏270 KB

I changed a couple of things in the way you were doing the reset and stop. Look at these changes and see if they work OK.Also the vi named diode control if there is no dependency as to which one gets set first then the way you have it is ok but if there is a dependency the way you have it wired there is no guarantee which one will run first.
Hope this helps
Joe.
"NOTHING IS EVER EASY"
Attachments:
event_10_28_04[2].vi ‏226 KB

Similar Messages

HT201263 I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes sc

I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes screen on. It won't go away and I have tried restarting and turning off my phone various ways various times. I don't know what to do!

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download

Itues 11. How do you make Podcasts play continuously. Right now they stop after each selection

In iTunes 11 my podcasts stop after each selection. How do I play them continuosly as I was able to in iTunes 10?

I second this motion of shenannigans.
Upon updating to iTunes 11 I was unpleasantly surprised by the fact that my podcast smartlists no longer played continuously.
So,
Dear Apple, perhaps you want to fix the section on your website describing how to use a smartlist for continuity of podcast play, because it is not working as described http://www.apple.com/itunes/podcasts/.
and yes, I too would like to know what's going on and how to fix it.

IPhone is unresponsive and continues to reset

I intended to erase all of the information on my phone and restore it to factory setting because it was being problematic.
After pressing the erase all information on the iPhone the process began to take place. Unfortunately, the phone continually turns on, freezes in the progress bar and turns off, continuing this process for the past three to four hours. It is unrecognizable in iTunes as well.
I have recently tried to reset the phone and put it into safe mode, but it is still unresponsive.
Any recommendations are appreciated as the Apple instructions fail to give any further information in solving the matter.

If you can't do a reset or power your iPhone off and on, nothing except for restoring your iPhone.

I started an account on iTunes when iPod first came available. Bought several iPods in that time. Eventually I changed my email address and continued to buy music and games. Now I have 2 Apple ID. How can I get everything on one ID?

I have 2 Apple ID. One old on yahoo I don't use, and another on gmail I use regularly. How can I drop the yahoo Apple ID while still keeping all music and other apps? I want everything on my latest apple devices and want to do so with just one account, Apple ID and password..

http://support.apple.com/kb/HT5622?viewlocale=en_US
-The specific point:
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.

How to recover incomplete download items from the point where it stopped in firefox browser in case of unexpected computer crash or shut down

While downloading with Mozilla Firefox if by any means my computer crashes or shutdown unexpectedly I lose all data that had been downloaded so far. How to recover the downloaded data without a need to start all the way back from scratch to download the same data. Please help me if there are any means to recover downloaded mbs and continue from where it has stopped, so that I can avoid losing extra mbs and time to go back again and restart downloading.

Try these steps:
# Move the old .part partial download and the final file without the .part that has size 0 to another location.
# Start a new download and pause it, don't close Firefox.
# Copy the two files (.part and 0 byte final) that you moved above back to the download location to replace the new files that were created.
# Resume the download in Firefox.
If that doesn't work then the server may not support resuming.

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

Woke up to my iPhone 4 being completely blank. I've tried restarting and resetting it as well as charging it and plugging into my computer. Can anyone shed some light as to what may be wrong or how to fix it? Thanks

Woke up to my iPhone 4 being completely blank. I've tried restarting and resetting it as well as charging it and plugging into my computer. Can anyone shed some light as to what may be wrong or how to fix it? Thanks

Hello there, Kyle.Kuz.
The following Knowledge Base article that provides some helpful pointers to help resolve your issue is:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How to interrupt an funtion call and continue the followed code?

for example, the code:
public class A{
public static void main(String[] args){
int i = 0;
method1();
system.out.println("exit");
public void method1(){
int j = 0;
while(true){
j +=1;
there is a error in method1(), so the call the method1( ) in main() will make an error.
how can i interrupt this funtion call and continue the followed code?

in actually, I can not control the method1(), that's
an remote object function.
So I can not add exception in methoes().Then in your main method catch whatever "Error" your method1 is throwing.

The tab button is not operating, it is visually there, just doesn't work. tried rebooting and help but cannot solve the problem. also tried control+T and nothing works, reset to default and still doesn't work.

Tab button is not operating. Tried rebooting, resetting options to default, tried with mouse and with control+T and nothing seems to activate it. It was working properly until an hour ago. Now the + (tab) button is there but it is idle. How do I fix this issue?

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbFWV5/3.12.2.16749
See:
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Can i edit my game center account to stop sharing friends and games from another apple id that associated with my own new apple id.how to reset it without losing my apple id and i can stiil use it?

Can i edit my game center account to stop sharing friends and games from another apple id that associated with my own new apple id.how to reset it without losing my apple id and i can stiil use it? Because i've made lot of paid purchases using this apple id. In my game center account i have so many games data that i'd never installed.i wanna stop sharing friends and games with this xxx apple id in my old ipad version ios 4.2. and i can still keep using this apple id in my new ipad 3rd gen version ios 6 without sharing game and friends with this xxx apple id? and how to remove the games data that i never downloaded in my ipad but still registered at my game center account.i wanna keep using this apple id coz so many fav application i've purchased from this id. the answer as soon as possible if there is some one can help me to solve it.thank u for reading my question and very big thanks for anyone who can give me a helpful answer.

Why do you ask in the iWeb forum?

I have just reset my ipad as my apple id was disabled, but once reset I went to download an app and it said apple id disabled again? What is wrong and how can I fix it?

Someboby please help me.....THIS IS DOING MY HEAD IN!! I have had to reset my Ipad as my apple Id has been disabled which reset fine but after the reset I have gone to download an app it was automatically disabled again. Any ideas on why this is happening or how I can fix it would be awesome.

Apple ID being disabled is a different error, and one not related to your iPad.
Read: http://support.apple.com/kb/ts2446
Hope this helps

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

"Are you sure you want to shut down your computer?" prompt pops up for no reason and continues to pop up after selecting Cancel. How can I stop this?

"Are you sure you want to shut down your computer?" prompt pops up for no reason and continues to pop up after selecting Cancel. How can I stop this?
Mac Pro. OS 10.6.8

Then I suggest you read this thread regarding the 30" Apple Cinema Display and that particular message pop up... several possible causes... common denominator, the display.
http://forums.macrumors.com/showthread.php?t=617367

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

How do I reset controls and continue or reset controls and stop?

Similar Messages

Maybe you are looking for