How do i reset my ipod touch? i am locked out of it and it wont connect to my i tunes, what can  do ?

ok so im locked out of my i pod touch, and i cant remember my password, and it wont connect to my i tunes... is there a way to reset or get into my i pod

Please read Appendix B.
There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

Similar Messages

  • How do your reset your ipod password if your locked out?

    how do you change your ipod password if your locked out of it

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT1212 how do i reset an ipod touch that is locked?

    I am locked out of my ipd touch and im trying to reset it. i dont care if i lose everything i just want to be able to use my apple ipod touch.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT201304 How do i reset my ipod touch

    how do i reset my ipod touch?

    Why are you doing this?
    Options for when an iOS device gets locked because of forgotten passcode:
    Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414  ( https://discussions.apple.com/thread" - A restore erases the iPod. If you restore from backup the iPod will be like it was IF the iTunes library includeds [sic] all the synced media like apps and music since those are not included in the backup.")
    If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

  • HT1414 how do you reset my ipod touch..daughter try passcode too many times now its disabled

    how do you reset my ipod touch..daughter try passcode too many times now its disabled

    Passcode Locked or Disabled
    If nothing else will let you unlock the device - after so many unsuccessful attempts will be locked out - You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the Device.
    Instructions can be found here.
    http://support.apple.com/kb/ht1808

  • How do you reset your ipod touch's restriction code?

    how do you reset your ipod touch's restriction code?

    If you no longer the restrictions code, you'll need to restore your iPod to factory settings in iTunes.
    B-rock

  • How do you reset an ipod touch when it is still stuck in recovery mode?

    how do you reset an ipod touch when it is still stuck in recovery mode?

    Having the same problem. Plugged into the computer, iTunes doesn't connect to it. Plugged it into the wall and the low battery bar shows up but then it goes to the black/apple screen and stays there. The screen goes black and then when it pops back on again (on its own), the apple is still there. Won't hard restart either. Halp!

  • I needed to reset my iPod touch because my pass code was changed and I didn't know what it was, but now iTunes wont let me restore it what do I do?

    Please help me!! I needed to reset my iPod touch because my pass code was changed and I didn't know what it was, but now iTunes wont let me restore it what do I do?

    You'll need to connect it to the iTunes library you normally sync it with and restore it.  If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • How do i get my ipod touch to work after i downloaded itunes and plugged it in?

    How do i get my ipod touch to work after i downloaded itunes and plugged it in?

    This sounds like your problem:
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

  • HI, i have ipod touch 32gb, i have noticed that volume and power button's do not respond. What should i do?

    HI, i have ipod touch 32gb, i have noticed that volume and power button's do not respond. What should i do?

    Try the standard fixes in squence:
    - Reset the iPod (may not work because of power button problem).
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factoery defaults/new iPod
    If you still have a problem, it is likely due to a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My ipod touch 32g turned off on its own and now wont turn on or connect to itunes

    my ipod touch 32g turned off on its own and now wont turn on or connect to itunes

    Start here.
    iPod touch: Hardware troubleshooting

  • HT1386 how do i reset my ipod touch

    how do reset my ipod touch without the information was purchased at a yard sale

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • How do i reset an ipod touch

    Does anybody know how to reset an ipod touch 4?

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
    If you just wish to reset some items such as configurations: Tap Settings > General > Reset. Choose the option you prefer.

  • HT1212 How do i reset my ipod touch?

    How do i reset my ipod tough?

    If you forgot the passcode, then read the article you linked.

  • How do I unlock my ipod touch that shows a red disabled screen, and not been able to connect to the original computer it was sync to?

    How do I unlock my ipod touch showing a red ipod disabled connect to itunes, with the disadvantage of not having the original computer that my ipod was sync to?

    If you have a passcode to the screen lock that you've forgotten, you'll need to restore the iPod. Since you don't have the original computer, this will erase all the content on the iPod. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    Regards.

Maybe you are looking for

  • RMAN backup files are still exist since long time, how to delete?

    Dear sir; I'm using the below script to do daily backup, however there are many rman backup files are still exist and consumes HD size, how could I delete these files in daily bases? some files dated in FEB, MAR, APR, ============Daily RMAN script===

  • Daisy chain of routers

    I've already got a 500GB Time Capsule on its way in the mail. I've just found out that I'm going to be moving into a house with a bunch of friends. The potential problem is that the owner of the house already has his own wireless a/b/g router (brand

  • How to set line break points in JSF Facelets files on NetBeans?

    I am running debugger on NetBeans. I can set line break points for jsp files but cannot for Facelets files with extension 'xhtml'. Dose anybody know how to set break points for Facelets xhtml files? Or is it possible to set break points for xhtml fil

  • Emctl stop -- error

    $ emctl stop Enter Management password : Error: javax.naming.NamingException: Lookup error: java.net.ConnectException: Co nnection refused; nested exception is: java.net.ConnectException: Connection refused

  • Random numbers

    I'm doing a java program using random numbers. I would like to avoid that each generated number, besides unique, is different from its index in array - for instance, the first number in array is not number 1, the second is not number 2, the third not