How do I return to the last screen I was on without getting an err message?

I am in an SAP transaction (COR2, chg proc order) that has tabs. I built an additional tab using a user exit screen and code. In the Process after input I deliver a pop-up message and want to return to that screen(user screen, or I'd even go to another of the SAP delivered tabs.
When I say "leave to screen 5115" I get this err mess"'SET SCREEN not allowed in subscreens (screen: SAPLXC01)"
Here are the details, I'd like to return to either one of these screens:     Thank-You
SAP screen:
Transaction          COR2        
Program (screen)     SAPLCOKO    
Screen number        5115        
Program (subscreen)  SAPLCOKO    
Screen number        5190        
Program (GUI)        SAPLCO40    
GUI status           VVKOPF      
Or the custom screen:
Transaction          COR2      
Program (screen)     SAPLCOKO  
Screen number        5115      
Program (subscreen)  SAPLXCO1  
Screen number        5100      
Program (GUI)        SAPLCO40  
GUI status           VVKOPF

Thomas
Check this tutorial: * Multiple Menus with GPRM based button jumps *.
I think it's what you need.
Hope that helps !
  Alberto

Similar Messages

  • How can I return to the previous screen in safari?  the arrow is often grayed out.

    how can I return to the previous screen in safari?  the arrow is often grayed out.

    Try a 2 finger swipe left or right to change screens. If that doesn't work go to System Preferences/Trackpad/More Gestures and set it up.

  • Bridge from CS3 won't open and just sits on the task bar. If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

    If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

    Check System Preferences > Energy Saver
    Select:  Put hard disks to sleep when possible
    Then click: Restore Defaults

  • I have tried to set my homepage to a specific website. However, whenever I open a new Safari window, it always returns to the last page I was at before I closed Safari. Any ideas? I did this was Safari preferences, open new window to homepage...

    I have tried to set my homepage to a specific website. However, whenever I open a new Safari window, it always returns to the last page I was at before I closed Safari. Any ideas? I did this under Safari preferences, open new window to homepage...

    Safari is opening using the resume feature. To disable that, quit Safari using Command+Option+Q or Hold Option when choosing the menu item Safari>Quit.

  • How can I return to the last selected item in a dialog box

    In OS 9 using Dreamweaver (for example) when I was adding images to a document, each time I added one the dialog box would return to the last selected image and I could just arrow down to the next in the list, add it (exiting the dialog box) and then repeat the process until I had added all the images in the folder. Now, using OS 10.4, after I add an image, and return to the add image dialog box it goes to the first item in the folder list instead of the last selected item. this really slows the process down, and when I'm adding 100 items or so, it's a real drag. I figure there has to be a way to get the dialog box to return to the last selected item, but I don't know what it is. Help!

    sorry, that is not what I want to do.
    I want to return to the initial state before I quit the app.
    Actually, I want to return to the intial state after I click a row in a table the second time.
    Sorry, I didn't say clearly.

  • Since upgrading to 7.1 on my iphone 5C I try to open the phone icon to make a phone call and it tries to open then returns to the home screen.  I also cannot get anything else to open.  It will randomly reboot or just freeze.

    I just got my iphone 5C on Wednesday, I was slow to move my apps over because well I loved my iphone3.  Never had any problems!
    I finally moved my apps over last night and was prompted to upgrade to 7.1.  I upgraded, then received a voicemail, listened to part of the voicemail (the phone dropped the call) and went back to the main screen. 
    Then nothing worked. I try to open the phone icon and it tried to open but it returned to the main screen.  I tried opening anything else and nothing will work.  Not even the phone icon.  It also would not shut down. 
    I let it sit for twenty minutes and tried to turn it off.  Then ten minutes later it just rebooted itself.  Waited until it came back up and tried to open settings, photo, camera, phone nothing will open.
    I know the touch is still working because it is locked and it will allow me to unlock it every time.  So I guess something is working.
    Any suggestions?

    Finally got my phone to power off.  I was able to reset the phone and everything is now working.  I guess I just needed patience!

  • How can I return to the Classic address book 3 pane view?

    How can I return to the Classic address book 3 pane view  & get rid of the stupid fake leather and same for iCal?

    I asked the same question at the Apple Genius Bar a week or so ago and they said there was no way to change it.  I am with you - do not like this new format at all and would love it if Apple would offer both -maybe when they do an "fix" next?  This was one change in Lion that should not have been made from Snow Leopard.  I am really sorry I upgraded at this point.

  • Using Cap6, need to create menu screen that allows user to click a button, branch to other screens, and return to main menu. When returning to the main screen the button that was clicked will be grayed out or inactive.  How do I do this?  I created image

    I am trying to emulate a piece of equipment.  I need the user to be able to click on specific buttons that will take the user to another screen(s).  After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed.  I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button.  How can I get that 3rd state to stay after user returns to the main screen? 

    Hi Elizabeth,
    Since I just did this morning what you are currently attempting to do, I thought I'd share my method.  I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out.  However, I am happy to share here anything I have learned thus far.
    First, here is what my initial slide looks like (see interaction slide below).  I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide.  Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance). 
    The initial slide (interaction slide):
    Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below):  Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed.  The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
    Content Slide 1:
    Remember, there may be an easier way to do this in Captivate.  I am using Cp6 for this module.
    1. I created two user variables as follows
    Name: v_batteryExplore
    Value: 0
    Name: v_fuelExplore
    Value: 0
    2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
    Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
    I have also noticed that it matters where the buttons are located on the timeline.  It seems best to have buttons above all other content.  Not sure why, but I have had images not appear when I have not done this.
    And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
    As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible.  Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name.  In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden.  Here is a final screenshot of my timeline for this interaction.  I hope this information helps you!

  • Suddenly the apps I downloaded won't work. The screen "blinks" for a second as if the app is loading, and then returns to the home screen. All the apps that came with the iPod seem to be working fine. How to get them all working again?

    Suddenly the apps I downloaded won't work. The screen "blinks" for a second as if the app is loading, and then returns to the home screen. All the apps that came with the iPod seem to be working fine. How to get them all working again?

    First try a hard reset.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    If still no luck, try downloading another free app from the App Store.
    More troubleshooting here.
    http://support.apple.com/kb/ts1702
    Lastly, try to restore the iPod from a previous backup or restoring it to factory settings.
    B-rock

  • My iphone 4 is stuck on the hello screen...with a white background after i tried to update it.  How do i correct this?  I have already gone to itunes and backed it up.  But after i back it up it always return to the hello screen in  different languages ?

    My iphone 4 is stuck in the setup phase with a white background.  It tells me hello in several diffrent  languages and tells me to slide to set up.  I have already backed it up on itunes several times but it always returns to the hello screen with the white back ground.  Can anyone please help me with this?  All of this happened after i updated it for the 1st time. Help pLease?
    Edward

    Hello Edward
    Follow the prompts on your iPhone and you will get either at your home screen like normal or get to a point of restoring from back up. The article below will give step by step for restoring from back up.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How to get safari to open to the last page I was on and screens to enlarge automatically?

    Hello, I just upgraded to the latest iMac version from my 2010 model, and whenever I close and open up safari it opens to top siotes instead of the last page I was on, and every time I open it I have to enlarge it myself by clicking the arrows in the top right. Same happens with everything else, like the app store. How do I change this so whenever I go to safari it opens to the last page I was on and has safari, app store, etc. have large screens right away? I set up my old iMac 3 years ago, and I guess I must've done something to have it do this, but I forgetn what I did. Thank you in advance

    Hello there, Clumn.
    The following Knowledge Base article provides some general tips for Mavericks that may address your issue:
    OS X Mavericks: General preferences
    http://support.apple.com/kb/ph13803
    Particularly of note:
    Close windows when quitting an application
    If you quit apps with windows still open on your screen, selecting this checkbox prevents the windows from reopening automatically the next time you start their app.
    This feature when not selected will allow the application to reopen windows automatically when you open the app.
    Additionally, this article provides information on how to set windows Full Screen:
    OS X Mavericks: Take apps full screen
    http://support.apple.com/kb/PH14302
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Frequently, when I click on a link, try to return to the previous screen or close a tab, an option box comes up that requires a choice rather than simply doing whatever was originally requested. How can these option boxes be prevented?

    Frequently, when I click on a link, an option box will pop up asking whether to open in a new tab or new window and several other options, rather than simply opening in the same window or tab. When I try to return to the previous screen, it often will not let me, or provides options that I do not want. When I try to close a tab, an option box comes up that has several choices that I do not want and "close tab" at the bottom of the box. How to prevent these option boxes from popping up?

    Turn of JavaScript. These are "per site" and generated by the site. They are not the normal function of the browser. This usually occurs on attack sites. I'd stay away from them.
    The only "trusted" site I ever saw do something like this is Google, which asks me if I'm sure I want to close the tab that has their search results. I really pisses me off, but I have yet to find a way to stop it.
    It is certainly bad coding behavior on the part of whomever designed the site. When a user clicks an action, it should be presumed, unless the action is potentially very destructive, that they intended to perform that action. A UI should never incessantly second guess the intentions of a user.

  • When I try to play music on my iPod touch it automatically returns to the artists screen. Does anyone know how to resolve this..?

    When I try to play music on my iPod touch it immediately returns to the artists screen. Can anyone help?

    - First try a reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Next would be a restore. First from backup and if problem persists, restore to factoruy defaults/new iPod.

  • How do I return to the old full screen bookmarks display?

    Using Safari 7.0.3 and OS 10.9.2 I find the bookmarks display most unsatisfactory. I don't like the sidebar. I want to return to the full screen display of the folders and names at the bottom so I can rea the whole link title, with the option of scrubing through the site images above, iTunes style.
    The current configuration is awkward because I have to click on each bookmark link to see it.
    Thanks for your help

    Try "Edit Bookmarks".
    Click "Bookmarks" in the Safari menubar and then select " Edit Bookmarks".

  • I saturated all the available iPad (3rd. generation) screen space (home screens or desktop space) with apps, and the apps that got bumped out of the last screen, mysteriously disappeared? Where are those missing quick lauch app icons?

    Running my 3rd generation iPad on iOS 7.0.4, I saturated all the available iPad screen space (which would be the 15 home screens or desktop worth of space) with apps, and the apps that got bumped out of the last screen space mysteriously disappeared. Where are those missing quick lauch app icons now? The apps are still installed and can be searched/accessed through the finder, but they no longer have a user friendly access. How can I solve this problem?

    Christopher Doryan wrote:
    Hi Hexonxonx, thanks for trying to help, but next time please read the entire discussion, in oder to better comprehend what is being asked. The reason being is that your answer added nothing to what had already been mentioned.
    Like I said, I was aware it was possible to access the apps through the finder, but the question revolved around how to recover the quick launch app icons for certain vanished apps.
    Wow, kind of a snotty response to someone who was taking their own time to offer help.  Whether you thought it was helpful or not, didn't deserve such an unkind retort.  Maybe when you realize we all just users here trying to help others like you, who have issues and we don't get anything in return for the countless hours some people here spend offering that assistance, you'll maybe be a little less quick to be critical.
    Just sayin.......
    Oh and Meg offered the right answer.  Put your Apps in Folders, which will create extra space for the apps which have disappeared.

Maybe you are looking for

  • Arabic and Hebrew sections of a .pdf document

    I need to rearrage a .pdf that contains Arabic and Hebrew pages. Acrobat will not allow the Arabic pages to be placed anywhere but at the end of the document. I am using Acrobat 7 on a PC with PC InDesign CS3 documents as the source. Any hints or sug

  • WaitTime for Browse messages

    Can WaitTime be specified for browsing queue messages just like receive messages.

  • My speakers won't turn on.

    My output speakers won't turn on, every time I attempt to raise or lower the sound, the sound icon pops up and says it is at full volume. But then below the sound bar is a little white circle with a cross through it. But every time I plug in my headp

  • When I try to use video on my iPad it only gives me a black screen. What is the matter?

    When I tried to watch White collar downloaded from iTunes the screen turned all black and I can't get out, not evn by making a hard reset. What do I do?

  • All i see is a grey screen

    im stressing out.. i restart my powerbook and a blank grey screen comes up. i searched this forum and saw a few posts mention disc warrior..what exactly is that? anything i can do to get my powerbook running?! desperatly in need of help!