How do I round a formcalc calculation result to round $.725 to show $.73
I am not an expert with Livecyle ES and I am not a programmer. I found a time calculation and modified and created this form.
The purpose of the form is for student time to be daily and totaled per week. The hours and minutes are converted to decimal
and then multiplied by the rate of pay to get Week 1 Total and the same process is used for the Week 2 Total. The Week 1 rounded
calcualtion added to the Week 2 rounded calculation give the student's total gross pay.
Example:
Student works 21.3 hours Week 1 @ 8.25/hr (calculator total) equals $175.725 (I want figure to round to $175.73)
Student works 10.7 hours Week 2 @ 8.25/hr (calculator total) equals $88.275 (I want figure to round to $88.28)
Student's total gross pay equals $264.01
Payroll certificaiton shows 32 hours worked @ $8.25/hour with a gross pay of $264.01.
I am trying to get the Week 1 Total Pay calculated figure to round properly.
Everything I try rounds to $175.72.
http://admissions.siuc.edu/pdfs/time_report.pdf
Current settings are as follows:
Under Object Tab:
Field Tab
Field: Numeric Field
Pattern: Currently no patterns are set - I tried multiple patterns, but did not get the result I want
Value Tab
Type: Calculated - Read Only
Binding Tab
The Object is named: WK1TotalPay
Data Binding (open, Save, Submit): Use name (WK1TotalPay)
The Data Format: Float
Any assistance is greatly appreciated.
Hi,
You should be able to get this using a pattern (eg without script).
If you set a display pattern num{$z,zzz,zz9.99} it will round up to the second decimal place.
The 'z' is a digit picture symbol which will display a number if it exists. The '9' is a digit picture symbol which will display '0' if there isn't a number.
So if the calculation is 0, the field will display $0.00. If you are paying the students a cool million, then it will display $1,000,000.99.
This display pattern will round up the third decimal place.
Hope that helps,
Niall
Assure Dynamics
Similar Messages
-
How to find the month wise Overall result
Hi,
calculating share percentage of order quantity based on Overal result.
if given the fiscal period range in the variable(for ex 001.2006 to 009.2006) Overall result considering sum of all Order quantity data between this range.
But need to calculate share percentage based on month wise in this fiscal period range,for this regard should consider the sum of overal result in month wise.
How to calculate the month wise overall result?
regards,
Hari.Hi Hari,
You need to enable the results row for your Month char in the query. Then use a new formula with the function %CT to get the percentage share of individual values wrt to overall result of that month.
Hope this helps... -
Warning 'Calculating result as....' was not executed
Hi all,
At the time of executing a report, after giving the inputs for variables I am getting an warning messager: Warning 'Calculating result as....' was not executed'.
Kindly advise.
Thank you,
PraveenHi
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9794b990-0201-0010-2cb4-962bff1f0d19
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0ceb827-e6c1-2b10-4b94-de298fccade3
http://help.sap.com/saphelp_nw04/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
www.scribd.com/doc/6412427/How-Tobuild-BEx-Analyzer-Workbooks-for-Planning-With-Excel-Design-Objects -
'Calculating result as...' was not executed ???
Hi,
can anyone explain me the warning message that i received.
I have a query, and in its definition, three characteristcs are added to the "rows" (Region, District, StoreId) and the option "Display as hierarchy" is selected, expanding to "Region". Region has 4 values (north, south, east, west) So when query is run, it displays 4 nodes.
When i execute the query, this warning message shows up "<b>'Calculating result as...' was not executed</b> ". It calculates the results correctly for the first three nodes and fails to calculate it for the last node. The result displayed for the last node is wrong.
Could you please share your comments on this.
Thanks
Gova
This is the detailed message.
<b>Diagnosis</b>
The function 'Calcualte Results As ...' could not be applied everywhere.
The recalculation of a result cell always takes place based on the amount of detail cells that are subordinate to this cell, that is the detail of this drilldown. For this reason it is not possible to recalculate results in hierarchical lists, that is calculate of a results cell is not performed if a row or column with expansion symbol is subordinate to it. This is because otherwise this newly calculated results would have to change every time a node subordinate to it was expanded. This is not supported for technical reasons and would also confuse the user.
Note however, that calculate as "Suppress Results" is always executed
because the above exception does not apply in this case.
Any answers please. I am known to be generous in assigning pointsDid you ever receive any further information on this topic? I am receiving the exact error you received and I know this was possible in BW 3.2. My customers have been using this report now for months. I would like to know how to activate this same reporting in BW 3.5
Thanks so much!
Kristie -
How is Form Conversion Rate been calculated
Can anyone help me understand how the form conversion rate been calculated in the Landing Page Activity for Date Range report in Insight? Trying to figure out the conversion rates been measured in this report, so that we can properly interpret the results from below. Thank you in advance!
Landing page Activity for Date Range in Insight
Landing Page
Total Visits (by visitor)
Total Page Views
Total Visitors
Average Page Time
Total Form Submissions
Form Conversion Rate
my.learning.com/forms
381
422
375
0:09:25
28
100.00%
Transition | LP
18
28
17
0:05:53
2
100.00%
GoCool.html
17
18
14
0:13:09
56
77.78%
Summer Training 2015 Confirmation | EMAIL
21
34
14
0:08:15
22
57.89%
events.Training.com/forms/ISContactUs
27
57
25
0:05:29
21
45.65%Thanks so much for your detailed reply!
I checked into "Landing Page Activity for Date Range" report again and accidently hovered over "Form Conversion Rate"; it displayed the formula as "Total Form Submissions / Total Form Views". I added that metric to the report and saved locally. Now the Form Conversion Rate does equal to the calculation of Total Form Submissions / Total Form Views; data copied below. However, that formula is different from the one specified in the "Insight_ReportDetails_Guide", which is "Total Submits / Total Page Views").
Now, here comes the new questions for your help/ideas/suggestions -
- How come in our "Landing Page Activity for Date Range", the formula for Form Conversion Rate is different from the one listed in "Insight_ReportDetails_Guide"?
- Can we change it to use this formula: Total Submits / Total Page Views?
- Which one indeed is the correct calculation for Form Conversion Rate in "Landing Page Activity for Date Range" report?
Landing Page
Total Visits (by visitor)
Total Page Views
Total Visitors
Total Form Views
Total Form Submissions
Form Conversion Rate
Landing Page 1
5
6
5
6
0
0.00%
Landing Page 2
58
86
56
3
3
100.00%
Landing Page 3
14
15
13
15
2
13.33%
Landing Page 4
16
17
16
0
0
0.00%
Landing Page 5
66
144
55
143
1
0.70%
Landing Page 6
21
47
20
45
1
2.22%
Landing Page 7
24
25
13
25
6
24.00%
Landing Page 8
12
13
12
13
3
23.08%
Landing Page 9
31
37
27
6
6
100.00%
Landing Page 10
24
33
21
31
4
12.90%
Thank you very much!
Xuan -
How SAP standard run the interest calculation in AR module
Dear expert,
would like to seek for your advise, how SAP standard run the interest calculation in AR module ?
Also advise,does the interest calculation generate the interest base on the dunning run?What are relationship between interest calculation generate ?
What are the T-code for running the interest so that able to generate the interest posting according to baseline due date?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
Between, do you have any ideal the Interest Indicator ZB stand and reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
Please help.
Regards,
KarenHi,
Thank you for the promtp reply.
I still have query would like to seek for your advise.
1.Does the interest calculation generate the interest base on the dunning run?For example, the interest is only can be post/generated when there is dunning run and vise versa.
2.What are relationship between interest calculation generate ?Does interest generation depand on the dunning run?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
3.Between, do you have any ideal the reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
4.For posting use F.2B and that will calculate interest on open items of customers. Does this posting is post as noted item or posting document? Beside, do we every day need to run this posting F.2B in order to update the AR interest calculation report and post the interest for the overdue invoice?
5.Do you have any reference link/document /SAP notes on calculate interest on arres F.2B?
a)How the program calculate those overdue invoice for example: does sap calculate the interest base on interest + due amount until the customer made the payment?
b) If customer made payment on the due amount and not the interest and vise versa? How theF.2B program logic work on the calculation ?
Please help.
Regards,
KH -
I search for apps about my hobby. There are over 1500 results. Each single result takes up the whole screen. I will have to swipe the screen 1500 times to see all the results. How can I see 8 or 10 results and scroll through fast? Thanks very much for any suggestions!
Bump:)
But I've found some online reviews of this and I think we
are stuck with this amazingly awful search system until
they realize people like me won't bother searching for or buying
Apps.
Does a novel display one sentence per page?
Do you listen to a radio documentary that transmits one word a minute?
Or how about a song that is broken into four parts because the singers ran out of breath?
Searching app products has never been easy or a pleasure, and now it's tougher than ever. Who has the time to swipe 1,600 times? It HURTS - and hurts my brain just thinking about it.
Woe is me!
Woe are we! -
How Can I View Only The Search Results
I'm very frustrated trying to display only my 5 star rated images so that I can export them. WhenI search I get all the five star images plus all the other images in stacks with them. How can I just ge the search result images?
For that you would need to unstack your images from the stack. If your image is a part of the stack and it meets the desired search criteria ( in your case 5 star), then complete stack is shown in the search results.
If you want to bypass complete stack out of your search , you can use Find by Details (Metadata) search as -
Rating is 5
And
Stack is not in a stack -
Help needed in calculating result
Hi Experts ,
In a report i have 3 columns let say Col A , Col B & Col C.Col C is a CKF in query
and the desired data is like below :
A B C
50 20 1000
60 10 600
result 110 30 3300
Means Column C is the multiplication of Col A & Col B. And we want this fuctionality in the result rows too. But when we are executing the report we are getting the result as :
A B C
50 20 1000
60 10 600
result 110 30 1600
Can anybody help me out how to achieve this fuctinality in the result rows ??
Thanks in Advance...
SamHi Sam,
This is due to the formula collision at the result row of the column C.
Go to calculate key figure and in fomula collision u use the fomula across the rows.
Regards
Vamsi -
When importing a CD, the "CD Lookup Results" dialogue box came up and I choose the wrong CD title. Now iTunes is wanting to import a different song list than the one on my CD. I've shut down my computer and opened iTunes from the hard drive Program Files and tried to import the CD again with the same problem. How can I retrieve the "CD Looup Results" diaglogue box to choose the correct CD title to fit the song list on my original CD?
You might also be able to do it without importing the songs again I think. Just highlight the tracks, right click them and choose "Get Track Names". This feature only works on CDs that were imported via iTunes.
-
How to iterate the webservice Data control result set?
Hi all,
How to iterate the webservice Data control result set? I have an jsff page where I am displaying the single UserDetails by webservice DataContol. As per my design requirement I should iterate the DataControl resultSet to get the user details and push the same in to Managed bean. Please help me how to do this, any sample code please to iterate the resultset and get the data from it.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="uiBundle" value="#{adfBundle['edu.syr.oim.uiBundle']}"/>
<af:pageTemplate viewId="/templates/jsffTemplate.jspx">
<f:facet name="fTop"/>
<f:facet name="fCenter">
<af:panelGroupLayout layout="scroll" inlineStyle="width:100.0%;">
<af:panelTabbed id="pt1">
<af:showDetailItem text="#{uiBundle.PRIVACYFLAGS}" id="sdi4">
<af:panelGroupLayout id="pgl4" layout="scroll">
<af:spacer width="10" height="10" id="s3"/>
<af:panelFormLayout id="pfl6">
<af:panelLabelAndMessage label="#{uiBundle.STUDENTEMAIL}"
id="plam35">
<af:outputText value="#{bindings.stuEmail.inputValue}"
id="ot42"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{uiBundle.STUDENTHOMEADDRESS}"
id="plam39">
<af:outputText value="#{bindings.stuPermAddr.inputValue}"
id="ot35"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{uiBundle.STUDENTHOMEPHONE}"
id="plam40">
<af:outputText value="#{bindings.stuPermPhn.inputValue}"
id="ot37"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{uiBundle.STUDENTCURRENTPHONE}"
id="plam42">
<af:outputText value="#{bindings.stuCurrAddr.inputValue}"
id="ot40"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{uiBundle.STUDENTCURRENTPHONE}"
id="plam36">
<af:outputText value="#{bindings.stuCurrPhn.inputValue}"
id="ot38"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{uiBundle.STUDENTACAINFO}"
id="plam41">
<af:outputText value="#{bindings.stuAcad.inputValue}"
id="ot36"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{uiBundle.EMPHOMEADDRESS}"
id="plam38">
<af:outputText value="#{bindings.empPermAddr.inputValue}"
id="ot39"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{uiBundle.EMPHOMEPHONE}"
id="plam37">
<af:outputText value="#{bindings.empPermPhn.inputValue}"
id="ot41"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</af:panelGroupLayout>
</af:showDetailItem>
</af:panelTabbed> Above is my jsff code. Here how/where to add the phase listener to paopulate the managed bean while page render. Do I need to iterate the DC to get and push the each parameter in to ManagedBean or is there any easy way to do this by EL mapping directly at jsff. Please clarify.
Thanks
klnThat is what exactly I am trying right now. I am binding each of my page fragment outputText item in to backing bean and by that way trying to populate the values.
But the issue here is, the backing bean method doesn't getting any value until I hit any of the link or the button in the fragment. While loading the page the bean set and get is null. If i hit any link or button it is filled up with the vaule. As per my design, I would like to populate the bean method along with page load before any user action. But cant able to do this!! :(
Below is my sample code what I am trying right now
<af:panelLabelAndMessage label="#{uiBundle.NETID}" id="plam13">
<af:outputText value="#{bindings.netid.inputValue}" id="ot4" binding="#{UserDataBean.netId}"/>
</af:panelLabelAndMessage>
backing bean ex:
private RichOutputText netId;
static String netidVal;
public void setNetId(RichOutputText netId) {
netidVal= netId.getValue() == null? "":netId.getValue().toString();
this.netId = netId;
public RichOutputText getNetId() {
return netId;
public String getNetIdVal() {
return netidVal;
}Thanks
kln -
Need to understand how the PGI date is being calculated
Hi,
Need to understand how the PGI date is being calculated.
Does the PGI date get recalculated if the cusotme delivery date is changed.
Thanks,
RakiHi,
Thanks for the information and please let us know is there any calculation logic exist for that?
I have changed delivery date in the sales order and based on that-
- Transportation planning/material availability/loading/schedule line and confirmed quantity date was chaged.
Is this the - GI date - Transist time= PGI?
Thanks, -
When I do the search through the search window on the top right corner, the search results open on top of the page I'm viewing at that moment, instead of in a new tab, so I have to keep remembering to open a new tab before each search. How do I change this, that the results would open up in a new tab?
about:config
set browser.search.openintab to true -
How can i get the time and result together show in one Array or in Cluster?
hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
I post the time and voltge NOT together photo
Attachments:
12345.GIF 54 KBYou can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
Message Edited by smercurio_fc on 10-17-2007 03:15 PM
Attachments:
pic.PNG 11 KB -
How can i set the number of results that can be displayed on the page
hello im just wondering how i can set the numebr of results that can be dispaleyd on the jsp, when the there are more than 5 results i want the suer to press more
how is this odne could anyone send me a example code?
and also how can i get results from the query displayed as select list options, so that when they press one of teh results it goes to correspnding page
Thank youHi,
I assume that you have the connection to the DB.
You can try this code.
Statement stmt = con.createStatement();
String sql = "<some sql code for selecting>";
ResultSet rs = stmt.executeQuery(sql);
rs.last();
int count = rs.getRow(); // this is the number that shows how many numbers you have after select query
rs.first(); //we moved cursor again to the begining of the results.
if (count > 5) {
for (int i=0;i<5;i++) {
//as an example
rs.getString(0);
rs.getString(1);
rs.getString(2);
out.print("<a href='morePage.jsp'>More</a>");
else {
for (int i=0;i<count;i++){
//as an example
rs.getString(0);
rs.getString(1);
rs.getString(2);
rs.close();
stmt.close();I hope this would help you.
If you have problems let me know..
Ismail TURK
Maybe you are looking for
-
HOW TO USE A SINGLE PERFORM FOR VARIOUS TABLES ?
perform test TABLES t_header. select KONH~KNUMH konh~datab konh~datbi konp~kbetr konp~konwa konp~kpein konp~kmein KONP~KRECH FROM konh INNER JOIN konp ON konpknumh = konhknu
-
UCCX Historical Reporting - Transferred Calls
Hi All, I've hit a brick wall in a UCCX script I'm currently working on. My client has requested stats on where agents are transferring calls. It's an operator-type position and it's fairly important to the client that she be able to guage the call v
-
"End contact" not working on first click
Hello everyone, We're currently developing the ICWC in CRM 5.0 with a CLM extension pack. We're having a problem with the End Interaction button. The functionality behind it (raising the events, saving transactions, ending the current customer) are a
-
3d tool in cs6 not found?
3d tools in cs6 not found in the tool bar? although the 3d menu & 3d panel is found! my laptop is : processor : Intel(R) Core (TM) i5 -2410CPU @ 2.30GHz 2.30Ghz Installed memory: 4.00 GB System type 64-bit windows 7 copyrights 2009 What can i do?
-
The Chart in Dashboard has been congealed per moments
Hi, I created a request in answers, this request has a view in a chart. In answers the view is ok, for example it shows data labels on rollover, it does drill down, etc. When I include this chart in a dashboard the navigator is down and it has congea