How do I run a vb script in Windows Server 2008 R2

Hello,
How do I run a vb script
to generate an OID to create a new element
of a schema in an active directory
in Windows Server 2008 R2?
Thank you for your feedback.
Juan Carlos
Juan Carlos

Hello,
How do I run a vb script
to generate an OID to create a new element
of a schema in an active directory
in Windows Server 2008 R2?
Thank you for your feedback.
Do you have the script yourself? Assuming yes, it is the command:
cscript YourScript.vbs
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Similar Messages

How can I install and run lookout 6.1 on windows server 2008 64-bit without errors?

How can I install and run lookout 6.1 on windows server 2008 64-bit without any errors?
I was unable to start the lookout applcation after I install the lookout 6.1 on windows server 2008 64-bit.
(error code: 0xC0000142). Please help!
Thanks

This will pobably do http://joule.ni.com/nidu/cds/view/p/id/1051/lang/en but the major issue is that you should concentrate and read the instructions carefully. My two cents.
Dieet
Afvallen

How to locate Malicious or unwanted scripts in a Server 2008 R2 install?

I am Managing two systems as part of a competition, Windows Server 2008 R2 and a Windows 7 Machine. The competition is the National Collegiate Cyber Defense Competition.
Part of my issue is i normally am very good at research but it's like i am unable to find this bit of info.
I need Answers to several issues.
1. Where can i locate Scripts at in Server 2008 R2?
2. Assuming scripts aren't in one specific directory... Is there a Freeware Tool i can use that can locate and identify what they do? Such as tot ell em if they are malicious or dangerous.
3. Is there a way i can block execution of any scripts in the system not created by a valid source?
Thank you very much for your assistance, regardless if my questions are answered it is nice if i can at least be proactive and actually ask instead of keeping silent. Perhaps future competitors will be helped by this so they don't have to spend months locating
it.

1. It is very hard task. Strictly speaking you need baseline and compare every next situation with baseline.
2. There is a base of nice and useful tools in Sysinternals
http://technet.microsoft.com/en-us/sysinternals/bb545021.aspx
3. Basic study material is book written by Mark Russinovich - Windows Internals
http://technet.microsoft.com/cs-cz/sysinternals/bb963901.aspx
4. Expert hackers know how to hide script. Unless all files are digitally signed there is a non zero chance to get in (hypothesis).
These are very special topics that are well behind the scope of this forum ( and my knowledge).
Regards
Milos

Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw

Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.

This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull

How to install bo xi 3.1 on windows server 2008 r2 sp1 (virtual machine )

HI GUYS --
operating system: I am trying to install Business Objects into a virtual computer which has a windows server 2008 R2 SP1 operating system. I installed version BO XI 3.1 and I also installed Service pack 3 and Service pack 4. I installed liveoffice usual way. Whenever I try to design xcelsius and dashboard, I got some errors. In order to fix these errors, I followed SAP notes step by step. However, It didnt help me at all. I also tried to install by looking at install guide and supported platform documents, but I get an error each time of doing that. I can write each error over here. I also opened a link over here. Check out the link please to see the errors how to display webi docs. in liveoffice?
My main question is this.
Are there anybody who works operating system windows server 2008 R2 SP1 and this installed into the virtual machine? If so, Is it worked by doing which installations exactly?
Note; Business Objects tools work very well (infoview, cmc, web intelligencei and the others work without problems at QAAWS BO XI 3.1, but they have been given cluster error at BO XI 3.1 SP3) . In addition, port server settings have been installed based on the installion guide. If you give me any information other than whatever I said, I appreciate that. I also point out something. If I dont get any message which I attached a sample when I try to operate life office. In this situation I cant see either my documets or web documents in infoview)
[http://imageshack.us/photo/my-images/3/sorunc.jpg/|http://imageshack.us/photo/my-images/3/sorunc.jpg/]

Hi SYaGCi,
Denis is right this is actually documented in the Supported Platforms Documentation:
"Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
Kind regards,
John

HOW TO INSTALL ODI 11g / OWB 11g IN WINDOWS SERVER 2008 R2 (64 BITS)

Hi everybody,
I have a serious problem.
Last week we buy a new server with Windows Server 2008 Std. R2 x64, for a new project. I tried to install the RDBMS Oracle 11g R2 (x64) without problems, but when i try execute the "Design Center" contents in OWB, show me the error: 0xc0000018
Then, I´m thinking in install Oracle Data Integrator to solution it, but i`ve read that neither can install on 64 bits system... This is true?
Somebdoy knows how can I install OWB 11g / ODI 11g in a Windows 2008 Server 64 bits?
Thanks & Regards!

OWB 11G Will have been installed with the database, it now ships with 11G.
Check you are on a supported platform for design centre using the certification matrix.
Quick google search for you regards 0xc0000018 :
Problem in Lunching OWB Design Center

How to get clients connected in WMS on windows server 2008 with c# coding

Sorry to bother anyone about this question.
Can anyone knows how to retrieve amount of client connection to Windows Media Server in real time same as WMS does on server console by c# programming ?
I got logfiles of WMS in system32 directory for details but it must be off-line of all connections which will able to get those informations for doing anything,but in this case I want real time client connection
at online when a client connects to WMS that I will get amout of that client also.
I have tried to search Windows Media Service SDK to develop this on my Windows 7 OS,but I did not find that really.
Can anyone knows this,please ?
Regards,
BigBerm

Hi SYaGCi,
Denis is right this is actually documented in the Supported Platforms Documentation:
"Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
Kind regards,
John

How to get CAL license type from installed window server 2008 r2

Hi,
we have domain controllers which is installed with windows server 2008 r2 datacenter. now we need get the cal information of that servers like whether its per device or per user. can I get the information from an installed server. any scripts?
Thanks, Venkatesh. "Hardwork Never Fails"

Hi Venkatesh,
As Diramoh suggested, we do not need to install CAL in Windows Servers unless it is RDS CALs. You can put the document into your administration papers.
However, if you need further assistance about license, it is recommended to visit the Volume Licensing Microsoft Licensing Center.
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=2
Best Regards.
Jeremy Wu
TechNet Community Support

UnsatisfiedLinkError running 32 bit on a 64 bit windows server 2008

Hi,
I have developped a JNI solution a while back and it runs fine on a Windows 2008 server 32 bit computer, but when running on a 64 bit windows server 2008 it gives me the following exception
Exception in thread "main" java.lang.UnsatisfiedLinkError: <name of the library> (JVMPORT015E Unable to resolve DLL references - a prerequisite DLL may be missing)
at java.lang.ClassLoader.loadLibraryWithPath(ClassLoader.java:957)
at java.lang.ClassLoader.loadLibraryWithClassLoader(ClassLoader.java:926)
at java.lang.System.loadLibrary(System.java:453)
at xxx.jni.xxx.<clinit>(Unknown Source)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:192)
at be.xxx.initialize(Unknown Source)
at be.xxx.main(Unknown Source)
I tried specifying the library path by using the -Djava.library.path= property (once again this works fine on 32 bit version) but the same error.
I used the old Visual studio 6 compiler to create the 32 bit DLL. Do I need to re-compile the DLL for 64 bit? And any pointers on how to do that?
I am a C++ newbie so any help would be appreciated

Don't feel like researching it myself but you might start here and get back to us with what you find.
[http://blogs.msdn.com/oldnewthing/archive/2008/10/20/9006720.aspx]
Although seems conclusive I would research it more since 32bit apps must run somehow.
I suspect that you will need a different VS IDE though to make a 64 bit build.

Running oracle database xe (express edition) on windows server 2008 r2

Is it supported to run Oracle Database XE on Windows Server 2008 R2?
Database XE is only supported as 32-bit. Current builds of Windows Server 2008 only come in x64 configurations.
Here are the Database XE system requirements for windows:
[http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm]
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).
See:
- [Wikipedia page about windows server 2008 with info on R2|http://en.wikipedia.org/wiki/Windows_Server_2008#Windows_Server_2008_R2]
- [Wikipedia page on "windows 32-bit on windows 64-bit"|http://en.wikipedia.org/wiki/WOW64]
Thanks,
Matt

Hello Matt,
Is it supported to run Oracle Database XE on Windows Server 2008 R2?No.
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.So this means that only 32bit versions of 2008 will be supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).Which is probably why 2008 R2 is not supported.
You can either take the VM approach and install a 32 bit Windows or 64 bit Linux host, or you can queue in the list of persons waiting for a 64 bit Windows release. See the following thread for details (and the queue) for the latter: {thread:id=2277728}
-Udo

Running Crystal Report 10.2 on windows server 2008

Hello, Everyone,
I am migrating my ASP.NET application from windows sever 2000 to windows server 2008.
I have Crystal reports that was converted from version 9.1 to version 10.2, and application is using ASP.NET 2005.
I have installed on the server .net framework 3.5 and 4.0. Also Installed CRRedist2005_x86.msi u2013 Crystal Report redistributable package for .net Framework 2.0. To my understanding i dont need to install .net framework 2.0 since i have 3.5 installed.
Web app is running fine, but when i am running Cryastal Report I see the page that displays report, it is up for a second or two and when report is starting to generate page is closed. No errors.
Does anyone experiencing the same problem running CR 10.2 on windows server 2008? Am i missing something?
Can somebody help me?
Thanks,
Michael

CR 10.2 is not supported on WIN 2008. See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki for more details.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

How can I run a SQL script file...

How can I run a SQL script file from a location on my computer without providing the whole path?
Is there some way I can set a "Working folder" in SQL Plus??
Thanks!
Tom

You can create an environment variable called "SQLPATH" which is a list of directories that SQL*Plus will search for your .SQL
scripts.
I would like to use another directory than the oracle/bin...
How can I do this ??
Hello,
U can do this by this way:
Save odm_script.sql file to the default Oracle
directory i.e. Oracle-Home/bin and Run following command
through SQL Plus.
SQL>@Script_Name
I hope this will resolve ur problem.
Regards,
Omer Saeed Khan.

PowerShell Script running Excel won't run on Windows Server 2008 R2

I have a script that creates a report of a single example of each warning or error in the Windows Event log, for each server in a list of servers,with the number of times that error has occurred in the last week on each server. It creates this report in
Excel. I have this script running automated through Task Scheduler for one client on Windows 7 and it's working perfectly. I have another client that I am attempting to run this script automated on a server running Windows Server 2008 R2. I can manually run
the script and everything works, but if I try to schedule the script everything works except for the Excel PowerShell commands. I've have tried:
Created the Desktop folders for config\systemprofile in System32 and in SysWOW64.
Configured permissions in DCOM for Microsoft Excel Application.
Configured folder permissions for config\systemprofile.
Verified PowerShell is working.
Unchecked the option in the task to only run while logged on.
Does anyone have any idea why this is happening and how I can fix it? Thanks!
Sincerely,
Christopher Beard

You might have to launch the application once as the system account so that it can set up the Excel environment, I've had the same problem when trying to update Excel files from an admin Powershell console using my admin account. Use psexec with
a -s option to run it as system account locally while logged on to the target server:
psexec -s "c:\program files (x86)\microsoft office\office14\excel.exe"
Then you'll most likely be prompted to input initials - which is what I suspect is preventing your code from running properly.
There may be some other more elegant way to handle this, but you'd be better off asking that question in one of the forums devoted to Office products.
I hope this post has helped!

Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

Hi
Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful? If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
just a shot in the dark
I'm probably wrong....or not
John B

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How do I run a vb script in Windows Server 2008 R2

Similar Messages

Maybe you are looking for