How do I 'save as' after completing a form?

I want to be able to 'save as' rather then 'save'. I have loaded PDF forms for contract purposes that will be modified often, I would like to save the file as a different file after editing rather then saving over the root file.
Thanks!

Hi a_hubick,
George is right that you need to duplicate it and then can edit it.
We currently do not support the "Save as" feature. We have added this is our backlog. Thanks for contacting us.
-Shilpi

Similar Messages

How do i save data after daughter forgetting her pass code without backing up???

How do I save data after 12 year old daughter forgot pass code before any back up???

Then there is no way, a reminder why passwords (and backups) matter. Sorry.

How to re-activate 'Mail' after complete successful Time machine re-installation except 'Mail' backup keeps getting stuck?

How to re-activate 'Mail' after complete successful Time machine re-installation except 'Mail' backup keeps getting stuck?

Trying to re-instal my email history the 'Mail Message Import' dialogue screen says: 'Mail needs to import your messages. This might take a few minutes. You won't be able to use Mail until the import is finished'.
The problem is: after importing 5,000 messages it stops and the 'Time remaining' only keeps adding up to many hours (17 hours). There are almost 80,000 email messages in my Time machine backup.
How to get this working? I am even prepared to give up my email history if i can only get my 'Mail' application working again.

How to execute closing cockpit after completed the configuration?

Hi Expert,
Please help, how to execute closing cockpit after completed the configuration? or if who have a document it will be helpful.
Best regards,

components of closing cockpit
Organizational Hierarchies (Company Codes, Controlling Area, Operating Concern, etc)
Task List template (Preconfigured templates available)
Task Lists: Derived from template and extremely crucial for successful definition of the month-end close.
Dependencies between the tasks
Monitor
Detailed information
5 steps for setting-up Closing Cockpit
Conduct Planning and Research
Create the basic template data
Build the closing template hierarchy structure
Configure individual tasks
Change the template to an executable task list
For delivering the Closing Cockpit successfully, you need to have a clear understanding of the current closing routines, the required tasks, who is responsible for each task, which tasks when executed should affect which level of the organization, and finally a clear process for review and documentation.

Problems printing a converted PDF which was converted to Word after completing the form

Problems printing a converted PDF which was converted to Word after completing the form. I have spent the last 3 hours trying to figure out what I am doing incorrectly. I can't get it to print in either the PDF or Word file. Please help, I need to complete this form and sent it NJ Department of Motor Vehicles Commission.

Hi, make sure you are using the latest release of PDF program.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

How to submit a program after completion of a background job

Hi Experts,
I have a small issue. In my report program i am calling one transaction using call transaction it will trigger a background job. After completion of this background job i need to submit another program, Because the background job updating few values, using this value only the second program functionality will works.
Currently when i execute my report its calling 1st program and triggering the background job. Once the job started again the program triggering the next program. Here after competion of the background job only this program should submit next program. Anyone kindly suggest some clue.
    CALL TRANSACTION 'ZSAPRCK60' USING    zbdcdata
                            OPTIONS FROM g_s_options
                            MESSAGES INTO msg_tab.
SUBMIT SAPRCK10    VIA SELECTION-SCREEN
                    WITH kalaid = p-kalaid
                    WITH kaladat = sy-datum
                    WITH PARALLEL = 'X'
                    WITH SERVNUM = '10'
                    WITH backgr = 'X'
                    AND RETURN.
Mohana

Hi,
There is one function module there which gives you the job status .. if the job is finished then the value will be 'F'.I don't exactly remember the FM but then you can search with BDLSTATUS or BDSTATUS in SE37..
do.
call fm BD****STATUS
IF STATUS (IMPORT PARAMTER) eq 'F'.
exit.
endif.
enddo.
Regards,
Nagaraj

How to disable Save & Print functionality in PDF form?

Hi,
This is the requrement, client need to disable Save & Print functionality in PDF form. (They not allow employee save & print the hrforms payslip)
May I know how to do it. Thank you.
What is the parameter value in structure SFPOUTPUTPARAMS that I need to set in order to disable Save & Print functionality ?
call function 'FP_JOB_OPEN'
    changing
      ie_outputparams = SFPOUTPUTPARAMS
    exceptions
      others          = 1.

Hi Nayan,
I'm the person who did the WD as well, using IFrame to contain the PDF binary. WD site didn't contro the binary source.
I pre-define the 'FP_JOB_OPEN' before calling the PDF generation.
Optional: Set output parameters
gs_outputparams-nodialog = ''.
gs_outputparams-preview   = ''.
gs_outputparams-getpdf    = 'X'.
gs_outputparams-nopreview = 'X'.
gs_outputparams-noprint   = 'X'.
gs_outputparams-noarchive = 'X'.
gs_outputparams-nopributt = 'X'.
gs_outputparams-arcmode = '1'.
gs_outputparams-noarchive = 'X'.
Open print job
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = gs_outputparams
    EXCEPTIONS
      OTHERS          = 1.
Regards,
Eric

How can I save a page complete so that I can take our a print later on with its complete texts and pictures.I want that the copy of the page when printed should be exactly the same with all the details.

When save a web page and try to take out print the pictures in the web page are not coming in the print.I want to know how to save the webpage so that when I take its print it comes out in its entirety without loosing any details of the original webpage.

If you drop down the "Save as Type" list in the Save page dialog, you have the choices of HTML only (images not saved to your computer) and HTML complete (images are saved to your computer). Neither of these is perfect.
If you really need a record of what you see today, I suggest printing the page to PDF. There are a number of free print-to-PDF products, as well as paid ones. This isn't perfect either, because some sites look different in print than on screen, but it avoids the problem of sites changing or links breaking after your browsing session ends, etc.
If you have an example of a page that can't be printed as it appears on the screen, you could post a URL. For example, many blogs print in an "unstyled" format.

Just downloaded LR3 trial - how do I save changes after editing?

Can't see any ref to it.
Thanks, ot

clvrmnky wrote:
areohbee wrote:
I lock my photos after editing is complete ...
The beauty of non-destructive editing and snapshots (and, now, publish services) is that, just like negatives of old, your editing never has to be "complete."
When I say "complete", I dont mean "finished forever", I mean "finished for now".
I dont know how I do it, but sometimes I end up with AutoSync turned on by accident - last time it happened I hadnt even used AutoSync recently, it turned on by itself, upon restart after a crash I think. Even if my analysis is wrong and its entirely due to operator error - the result is the same: massive inadvertent edits until I detect the condition.
Also, I make another mistake sometimes (I think its me): when fast typing, I end up normalizing exposure across a whole sh-load of photos... - still havent figured out how I do that since I dont even see a shortcut for that. Sometimes I catch it right away, sometimes not until much later.
Another frequent mistake made by newbies a lot and seasoned users upon occasion: forgetting when edits will target multiple photos vs. just one.
I could go on and on... - I love that I can tweak edit settings on a whim, non-destructively, but I dont love it when changes are made inadvertently. Locking does not keep you from editing, just reminds you that it had previously been considered "finished for now" - you can proceed to edit if you wish, or revert to locked state after viewing a detalied list of changes. "Save Metadata" has now become obsolete for me, replaced by "Snapshot & Lock". I dont know about you, but my workflow is:
- After import, spend a good while editing, until done for now (at which point I snapshot & lock), then optionally at some point in the future:
- Revisit for re-editing until done for now... If thats just one change: say Exposure +.1, and it was intended, I confirm intention then move on. If I plan to make a few more changes, I unlock until I'm done with it, then relock).
To each their own, but ChangeManager has become my all-time favorite plugin. - Gives me a very warm and fuzzy feeling knowing that my photos will never be changed inadvertently - only intended changes... - I hope Adobe builds this into Lightroom proper in Lr4, but even if they dont, I'm covered. I never realized how much stress it was trying to be ultra-careful all of the time when using Lightroom, to not make inadvertent changes, until that stress was gone...

How do I "save as" after first save?

The "save as" option in the "file" dropdown goes away after the first save. How do I (easily) change the location for the save or the name of the file later on?

Bovie,
Your option to create a duplicate document and save it to a new name and/or location is called Duplicate. This duplicate will be identical to the state of your parent document at the time that you issue the command.
As has always been the case, you can change name and location of a file in the Finder. You can edit the filename and you can drag it to a different folder. Or, you can Duplicate the document, save it where you wish and delete the original, what I would call the hard way.
Jerry

How to reinstall firefox 7 after complete deletion and recover all personal settings

I tried windows restore, but there are no records of a restore point.
I was using CC Cleaner program which told me that a previous version Firefox 6 was still on the drive. I allowed it to delete that, and then found that my Firefox 7 icon & program had disappeared completely.
I could just download & reinstall FF7, but then all my saved settings would probably be wiped out -- is that correct ??

Give it a try. Firefox saves all of your personal settings in a different folder than the program itself. So it's possible that you still have your personal settings ([[Profiles|profile folder]]). You can install the latest Firefox and if it finds your profile you'll be back in business.

How can I have a recipient complete duplicate forms?

I have to send a form to several entities with in my company. Each entity needs to complete the same form for each of their accounts (ranging from 5-20 accounts per entity). How can i have them duplate the form easily. I am using Adobe 9 standard. The form is currently in excel.

Just have them save it to a new name. It is not clear what you are doing with the form. They can simply be completed and submitted, requiring no saving (only data submitted). What do you mean by duplicate forms as such.

Please help...How do I save a created fill in form so it is usable by all?

I scanned and saved as a PDF a document that needs to be filled out. I opened it and created the fill in form and saved it to our shared file. However no one can use it unless they have the full version of Adobe installed. What do I need to do so it can be filled out by anyone even if they only have the reader? Please help need the brownie points with the boss.
Thanks

Open the document in Acrobat and select: Advanced > Extend Features in Adobe Reader
This is for Acrobat 8 & 9. In Acrobat 10, it's an option under: File > Save As...
But be aware that there are licensing restrictions for such enabled documents. In short, if you distribute the form to more than 500 recipients (as you do when you post it to a publicly available web site, for example), you may collect data form no more than 500 instances of the form that has been returned to you, including hard copies. If you distribute it to fewer than 500 recipients, you can collect data from an unlimited number of returned forms.

No email being sent after completion of form

Hi
Can someone please help!!
I am setting up a survey form form which is uploaded to http://www.mentalhealthstrategies.co.uk/survey.html
The only thing is once it is filled in and submitted, the 'thank you' page is loaded but I am not receiving any email to give me the details.
My CGI script is as below. Can someone please tell me what I have done wrong. I am quite new to scripting and I am not sure what to do next.
#!/usr/bin/perl
use CGI::Carp qw(fatalsToBrowser);
if ($ENV{'REQUEST_METHOD'} eq 'POST') {
read(STDIN, $buffer, $ENV{'CONTENT_LENGTH'});
@pairs = split(/&/, $buffer);
foreach $pair (@pairs) {
($name, $value) = split(/=/, $pair);
$value =~ tr/+/ /;
$value =~ s/%([a-fA-F0-9][a-fA-F0-9])/pack("C", hex($1))/eg;
$FORM{$name} = $value;
open (MESSAGE,"| /usr/sbin/sendmail -t");
print MESSAGE "To: julie.mak\@mentalhealthstrategies.co.uk \n";
print MESSAGE "From: " . $FORM{name} . ", reader\n";
print MESSAGE "Subject: Feedback from $FORM{name} \n\n";
print MESSAGE "Organisaion: $FORM{mail} \n\n";
print MESSAGE "Question 1: $FORM{question1} \n\n";
print MESSAGE "Question 2: $FORM{question2} \n\n";
print MESSAGE "Question 3: $FORM{question3} \n\n";
print MESSAGE "Question 4: $FORM{question4} \n\n";
print MESSAGE "Question 5: $FORM{question5} \n\n";
print MESSAGE "Question 6: $FORM{question6} \n\n";
print MESSAGE "Question 7: $FORM{question7} \n\n";
print MESSAGE "Question 8: $FORM{question8} \n\n";
print MESSAGE "Question 9: $FORM{question9} \n\n";
print MESSAGE "Question 10: $FORM{question10} \n\n";
print MESSAGE "Sent by: $FORM{name}\n";
close (MESSAGE);
&thank_you;
sub thank_you {
print "Content-type: text/html\n\n";
print <<EndStart;
<html>
<head>
<title>Thank You</title>
</head>
<body bgcolor="#dae7a2" text="#000000">
<h1>Thank You</h1>
<p>Your survey has been received. Thanks for taking the time to answer it.</p>
<hr>
EndStart
print <<EndHTML;
</body>
</html>
EndHTML
exit(0);
Thanks in advance
Jules1777

Originally Posted by gregd06082
Hello-
I am a newbie and I have created a form that is to be filled out and submitted upon completion. I have yet to figure out workflow so that it actually works but in the meantime I have added a user list where the user can type the name of the person that the form needs to go to next. When I add the person's name in this field and click OK to submit, she does not get notified. Not sure what I am doing wrong.
Greg
You have to set up a workflow notification when defining your workflow. Check out the Novell Vibe Advanced User Guide about workflows: Novell Doc: Novell Vibe 3.3 Advanced User Guide - Creating a Simple Workflow
HTH
Erik

How do I ensure respondents only complete one form?

I want to create a form which for my students which requires respondents to have a recognised student number and also allows one response per student number.
How do I achieve this?
Mike

Are you confirming your POP account is selected as the sending email account before the message is sent?
And regardless if the email is a new email or is replying to or forwarding an email received by the POP account and cofirming the POP acconut is selected as the sending email account, the message is sent by the Gmail account?
All message sent by the POP account are sent by the Gmail account?
If so, delete the Gmail account from your iPad and test if a message sent with your POP account which will be the only email account available with the iPad's Mail app is recieved from your POP account/address.
If not, something else is wrong or on play that has nothing to do with the iPad.

How do I 'save as' after completing a form?

Similar Messages

Maybe you are looking for