How do I select a database schema to use for a sequence file?

I have multiple database schemas on my TestStand system and when I select a sequence file I need to set the schema so the results get entered into the database correctly.
I use a SequenceFileCallback for DatabaseOptions in my sequence file and in this I set Parameters.DatabaseOptions.DatabaseSchema.Name='xyz' where xyz is the database schema name that needs to be used. This does not work and it reports an error that it can not be loaded or the file may be corrupted. Does this feature work or do I just have an error in what I am setting this equal to?
Solved!
Go to Solution.

Hi plf,
It seems to me you are going about this the right way. The DatabaseOptions callback is called immediately before the process model fetches the schema statements based on the schema name. I was able to change the schema on the fly in the same way you are attempting (using the default sequential model and TestStand 4.1).
Ensure you are using a schema that is defined in the Database Options Dialog (Configure»Database Options»Schemas Tab»Schemas Listbox).
Ensure you are using the exact name of the desired schema (copy it from the Name textbox in the above Schemas Tab).
Ensure that choosing this schema manually works when you run this sequence file (to be sure it is not corrupted).
Check that you are using double quotation marks around the schema name, not single marks as in your post.
Evan Prothro
RF Systems Engineer | NI

Similar Messages

HT5878 how to check the detail of font being used for reading the file received by an email

I received word file as an attachment with email on my iphone. I want to check the detail on font being used for reading the word file received as attachment in an email.
Thanks

You don't need to copy the cert out of your configuration. OpenSSL has an "s_client" subcommand which can open an SSL connection and verify the cert for you. It even knows how to do STARTTLS. Something like this ought to do it:
openssl s_client -starttls smtp -CAfile /path/to/ca/file -connect your.ironport:25
The /path/to/ca/file is necessary to provide openssl with a cache of root CA certs. You could use -CApath instead of -CAfile if you have a hashed directory of root CA certs instead of a single file containing them all.
You can also point this at your partner's SMTP server as well.

How do I select from multiple schema's

How do I select from multiple schema's
Tried:
SELECT * FROM schema1.table1, schema2.table2
WHERE schema1.table1.column1 = schema2.table2.column2;
Errored......

Thanks
We finally got in touch with our DBA and he said the same thing.
SELECT t1.*,
t2.*
FROM schema1.table1 t1,
schema2.table2 t2
WHERE t1.column1 = t2.column2;
I'll try it afther I finish a task my boss just gave me.
BRB then.

How do I change the partition scheme to use GUID partition Table.

How do I change the partition scheme to use GUID partition Table so I can get Snow Leopard to download on my 10.5 disk.
When I insert the disk it asks me to select the disk where you want to install MAC OS X.It only give me one option the 10.5.
when I click on it it says...
"10.5" can't be used because it doesn't use the GUID Partition Table scheme.
Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options.
I tried to do what it says and I can not find what it is saying. This is the info about my MacBook.
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00
SMC Version (system): 1.31f0
Thank you for your help!

The GUID partition option is one of three possible choices (click the "Options" button in the Partition") menu - be careful to have a full backup as changing the partition scheme will force an erasure on the disk. Take a look at this Apple support article for more complete information:
Firmware updates for Intel-based Macs require a GUID partition scheme - Apple Support
Ignore the stuff about firmware updates and just look at the changing GUID partition scheme.
Good luck - and don't forget about the full backup BEFORE making this sort of change.

How to find function module's and tables used for the particulat screen or TCODE?

Hello Nation,
I would like to know how to find the function modules and tables used for the particular screen or TCODE or program.
Example : I would like know the function module used in the program RDBGFT?
How can i find that?
Thanks in advance ,Awaiting your reply.

Make use of Find function with the keyword "CALL FUNCTION".
Make use of the same find function with the keyword "Select" to know the database tables used.
Regards,
Philip.

RE: What's database field are used in crystal report file?

Hi all
Please help me a C# code that using Crystall Report API (Crystal Report XI- Develop license) to get the list of database fieldname that using in crystal Report file. (What's database field using in header section ,group section , detail section of report.....)
We looking forward to hearing from you
Thanks
Son

Hello Son,
please use this code below to get a list of used database fields in a report :
//File Name:          CS_Get_report_data_out_inproc.sln
//Created:            April 11, 2008
//Author ID:          FLI
//Purpose:            This C# .NET sample Windows application demonstrates
//                  how to retrieve report data and put the into a XML file
//                  using unmanaged RAS.
// Note this is available without a dedicated RAS with SP2 for XI R2
using System;
using System.IO;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
namespace CS_Get_report_data_out_inproc
    public partial class Form1 : Form
        // CR Declarations
        ReportDocument boReportDocument;
        ISCDReportClientDocument boReportClientDocument;
        public Form1()
            InitializeComponent();
            //Create a new ReportDocument
            boReportDocument = new ReportDocument();
            // load the RPT file
            boReportDocument.Load("..
ReportData.rpt");
            // show in reportviewer
            crystalReportViewer1.ReportSource = boReportDocument;
        private void button1_Click(object sender, EventArgs e)
            //Access the ReportClientDocument in the ReportDocument (EROM bridge)
            boReportClientDocument = boReportDocument.ReportClientDocument;
            // Retrieve the Rowset Controller
            RowsetController boRowsetController = boReportClientDocument.RowsetController;
            // Retrieve the metadata (column headers) - this allows you to only retrieve the data that is on the report.
            RowsetMetaData boRowsetMetaData = new RowsetMetaData();
            Fields boFields = boReportClientDocument.DataDefinition.ResultFields;
            boRowsetMetaData.DataFields = boFields;
            // Now print out the data in XML file
            //(Note: This will print out the results of formulas too)
            StreamWriter sw = new StreamWriter("C:
ReportData.xml", false);
            sw.WriteLine("<?xml version='1.0' encoding='utf-8'?>");
            sw.WriteLine("<ReportData>");
            sw.WriteLine("<Reportheader>");
            // Print out the titles
            for (int i = 0; i < boFields.Count; i++)
                String boFieldName = boFields<i>.Name;
                sw.WriteLine("<ReportheaderDetail>" + boFieldName + "</ReportheaderDetail>");
            sw.WriteLine("</Reportheader>");
            //Create the cursor which lets us loop through the data
            RowsetCursor boRowsetCursor = boRowsetController.CreateCursor(null, boRowsetMetaData, 1);
            Record boRecord;
            while (boRowsetCursor.IsEOF == false)
                sw.WriteLine("<Customer>");
                boRecord = boRowsetCursor.CurrentRecord;
                for (int j = 0; j < boFields.Count; j++)
                    try
                        sw.WriteLine("<Detail>" + (String)boRecord[j].ToString() + "</Detail>");
                    catch (Exception err)
                        sw.WriteLine("<Error>" + err.Message + "</Error>");
                sw.WriteLine("</Customer>");
                boRowsetCursor.MoveNext();
            sw.WriteLine("</ReportData>");
            // CLose the file
            sw.Close();
            MessageBox.Show("XML File 'ReportData.xml' successfully created on C:");

How to define the application to use for opening each file type (pdf, jpg,...)

I installed an external application, and this new application has been configured by defect that it will be used to open all files with extensions like jpg, pdf, etc...
I want to revert this situation and define again the proper application I want to use for opening each file type. How can I do this in Lion?
Thanks,
Azaldier

Pick a representative file.
Get info. (Command-i)
There you will see a place "Open with" where you can select the application for that file.
Hit the "Change all..." button to do this for all files of this type.
charlie

Database Polling - Using Update a Sequence File - Not working

Hi All,
We need to use the Database Adapter Polling feature to poll a table for inserts and updates. In the database configuration page of "After Read" , we have used "Update a Sequencing File".
But the process is not being triggered. Any one has successfully tried this option.
Do we need to do any additional configurations ?
Please respond. Its urgent.
Thanks,
Sayama

If this is your first time working with the Property Loader I recommend the following steps:
- Save the Sequence File and go to Tools-> Import/Export Properties…
- Set the Data Location to be a File (You can change it later if you need to use a Database).
- Enter the file path.
- Select a File Format.
- Go to the Properties Tab and from the Available properties list (tree) select your global variable. The global variable should appear in the selected properties list.
- Click the Export Button.
- If you go back to the Source Destination File and click on View File you will notice that the file you selected was generated and that it has a special format.
You will identify the name of your variable under <File Globals> and the variable value under ‘Variable Value’.
Change the variable value to whatever value you want and save the file.
- Now, if you click the Import Button, the tool will get the value from the source file and set the edit-time copy of the sequence global variable to the value you entered in the file.
- Click the Done button and go and check the value of the sequence global variable. The value should be the value you entered in the file.

How do I find the codec used for a .mov file?

I have a .mov file from 2001 that I can't play. How do I find the correct codec to use for this. Is there somewhere in the file itself some kind of reference to the codec used? I've installed pretty much everything I could find in terms of codecs. I don't care whether on mac or windows. Just need the right codec.
Thorbjørn Vynne

Still no luck
If anybody out there wanna give it a try please download this clip
http://mhp.tv2nord-digital.dk/fileadmin/resources/thor/dv-00.27.04.11-V180.mov
If you can play it please please let me know with which codec.... I have a whole bunch of files with this codec I need to use
Best regards
Thorbjørn

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to track the history of supplier sites used for tax reporting (1099)

Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
Ram

Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

Why sql sever database design is used for essbas?

Hi
I am new to the Hyperion technology . i would like to know why do we use any RDBM like sql sever database design for essbase which is itself is the database.What is the main difference between these two databases?
My understanding is that Essbase act as same as SSAS for cube and dimension building.And they use database design for storing the tables and other information.
Thanks

A relational database can be used for a number of reasons with Essbase (and is required in some instances). These include
1. a repository for system tables for Shared services, EAS, Studio,EPMA, Workspace, Financial Management etc
2. A data source for loading Essbase
3. A work area for transformations

I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!

I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!

Hi scienceiscool,
You can go ahead with the photography plan as mentioned in the link below:
https://creative.adobe.com/plans/photography?promoid=KLXML
Kindly refer to the link below to get used to the application better:
Photoshop CC tutorials from novice to expert
Regards,
Sheena K

How can I set the maximum number of restarts for my PDF files?

I want sent my PDF to a friend,but I just allow him see it only twice.
How can I set the maximum number of restarts for my PDF files?
My software edition is Acrobat X

In the old days when PDFs were only opened on desktops and only in Acrobat or Reader, scripting could fake security features and people were generally convinced. As there are so many ways to open a PDF without scripts ever being run (from mobile devices to in-browser display, or simply opening the file in Illustrator), none of that works anymore.

Which DB schema is used for Windows auth. users?

I'm experimenting with using Windows auth. with Oracle and I'm curious about which schema is used for creating DB objects of the user, who is connected with Windows auth? Based on my experiments of one sample user connected with Windows auth. the objects that the user creates end up in SYS schema. This is very surprising, since Oracle discorages using SYS schema for user objects. Is this always the case (any user connected with Windows auth. will operate in the SYS schema)? Is there a way to provide a custom name for the schema that will be used by a particular user connected with Windows auth?
Thanks,
Vladimir.

Thank you for clarification. Indeed each user does work in it's own schema that is the same as the OS user name ('DOMAIN\USER'). My mistake was that I had that OS user in ORA_DBA group which automatically maps into SYSDBA, so my objects were created under SYS schema.
Now, here is a follow-up question: is there a way to make several OS-authenticated Oracle users to use the same schema if they are not a part of ORA_DBA group (I'm manually adding them to Oracle using "create user"). I know there is a way to do that with Oracle Internet Directory as described in the link you mentioned, but that requires us to force our customers to update to Oracle Advanced Security which we don't want to do.
Thanks,
Vladimir.

How do I select a database schema to use for a sequence file?

Similar Messages

Maybe you are looking for