How do I send measurement data to a file during sampling and not after?

Hi there, I am new to LabView and am in need of some help. I am acquiring temperature data which I am send to a LVM file at the end of the program. Is there a way to have my data recorded after each measurement (or periodically during the measurements if writing to a file every time will slow it down?)? I just wanted to ensure that if I am running the program for long periods of time that I will have some data stored in the case that the computer crashes, etc. and that I won't lose everything.
Any suggestions are appreciated!

Hi,
Of course, you can open a file before the measurement starts and keep on pumping the data in to the file and close the same after the measurement finishes. But you have to take care of the criteria like sampling rate and the number of samples each time you are acquiring so that there is no chance to loose our program speed and CPU usage.
MRK (CLAD)

Similar Messages

  • How can i manage old data on my file server that as not been used for over 2 years?

    I have 4 file servers and more then 50% of the data is older then 2 years
    I would like to move that data to another san, slower but i would like the user to have access by shortcut on there share
    Would make it faster to backup because the drive would be 50% less big and would not affect users because they would see the same thing in there share it would just be a little lomnger to open file upon need.
    Thanks
    I have an environement 2008r2 but can transfert everything to a 2012 r2 if needed
    Thanks

    robocopy is the tool I recommend to use for that. See that: https://social.technet.microsoft.com/Forums/windowsserver/en-US/51e5f602-b7f2-4d06-adda-1372c30f6250/help-for-script-to-move-old-files?forum=winserverpowershell
    You can also add the shortcuts using a script: http://superuser.com/questions/455364/how-to-create-a-shortcut-using-a-batch-script
    More if you ask them in the Scripting forum: https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • How can i send the data from WD to SMARTFROMS to fill it?

    Hi All,
    how can i send the data from WD to SMARTFROMS to fill it?
    Best Regards

    Hello
    After conferring with a colleague, the following response may help:
    The Smart Form doesn't have any special integration in WebDynpro.
    Therefore the application should implement it especially.
    Steps:
    1) Call of Smart Forms in mode GET_OTF
    2) Convert OTF to PDF
         3) Show the PDF in WD Context Node
    Similar topic was discussed here:
    Re: Displaying Smartforms in Webdynpro ABAP
    Thanks
    Kind Regards
    Toros Aledjian
    Edited by: Toros Aledjian on Nov 29, 2010 8:43 AM

  • HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS

    Hai Frnds,
    i Attend an interview they asked this questions can u know the answeres . tell me .
    In File to file scenario how can we reprocess records which failed records.
    HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS
    Thanks in advance
    thahir

    Hi,
    Refer these links:
    this might help you
    Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
    Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
    validating against schema file for the output XML file
    Informing the sender about bad records
    Regards,
    Nithiyanandam

  • HOW DO I SEND AN EMAIL ON MY IPHONE OR IPAD AND MAKE IT APPEAR ON THE MAIL APPLICATION ON MY MAC?   IT ONLY WORK THE OTHER WAY ---SENDING AN EMAIL ON MY COMPUTER ---APPEARS IN SENT ITEMS ON MY IPHONE AND IPAD.

    HOW DO I SEND AN EMAIL ON MY IPHONE OR IPAD AND MAKE IT APPEAR ON THE MAIL APPLICATION ON MY MAC?   IT ONLY WORK THE OTHER WAY ---SENDING AN EMAIL ON MY COMPUTER ---APPEARS IN SENT ITEMS ON MY IPHONE AND IPAD.

    IT IS FOR GMAIL.

  • How do I easily transfer data from Palm Desktop to iCal and Address Book?

    Hello,
    How do I easily transfer data from Palm Desktop to iCal and Address Book?
    I have a Palm Tungsten E handheld which just died.
    Luckily, all my data is backed-up on my Palm Desktop V4.2.1.
    I just bought an iPod-Touch, so I would like to easily transfer
    all my data (Addressbook, Calendar, etc) from the Palm Desktop
    on my Mac (OSX 10.5) to the equivalent Mac applications
    (Address Book, iCal) which will then allow me to view and update
    them on my iPod-Touch.
    How do I easily transfer data from Palm Desktop to iCal and Address Book?
    Thanks in advance for your help.
    David

    Hi David. The contact information is straightforward. Bring up your Address List in Palm Desktop, then select Export under file. You pick vCard as the format, and save the resulting file where ever. In Address Book, you then select Import --> vCards under file. You may need to edit things like birthdays by hand afterwards.
    I am still working on the Calendar information.
    - Chris

  • How do I send my BMP info from logic to pedals and keys?

    How do I send my BMP info from logic to pedals and keys?
    Is it possible to sync my logic bmp with my microkorg so that my korg automatic will sync with the BMP from logic?

    I'm not faniliar with the Micro, but logic outputs mtc and midi clock. The serttings are under project settings/synchronization. You'll have to set the Micro to external sync and be sending midi info from your computer to the Micro. Then if you hit play or record in Logic, the micro will chase it.

  • How can One sender communication channel pick two file from two location

    Hello
    I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

    >
    Soumitra Sinha wrote:
    > Hello Vijay
    > I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
    > i have two folder   folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can  pick file from two location and how one receiver channel can put in two location.please help me..
    Ok now I get your requirement.
    you cant achieve this -  how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
    easy way - involve IR mapping
    else
    have a adapter module to define your dynamic configuration.
    Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
    Set the dynamic directory/file name etc for your receiver adapter.

  • In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)

    In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)
    == This happened ==
    Every time Firefox opened
    == I upgraded to Firefox 4 (beta)

    Firefox 3.6.* and earlier set the downloaded file's modification time to the current time. In Firefox 4.0 the behavior has been changed, if a server returns a timestamp telling when the file was last modified (Last-Modified header), it is used instead.
    You can revert to the previous behaviour by using the [https://addons.mozilla.org/en-US/firefox/addon/93121/ Download Timestamp] add-on.

  • How to download the script data into pdf file

    how to download the script data into pdf file
    i have one option to download the script data to pdf file --->rstxpdft4 program.
    i have one doubt how to use this proogram.or any function module to download the script data to pdf file.
    Thanks and regards,
    Sri.

    Hi      Sri Sai,
    I know one method to convert the sapscript to pdf file :
    first generate a Spool Request for the required Sapscript
    then goto transaction SP01 and copy the generated Spool Request number
    now execute the SAP report RSTXPDFT4
    here enter the copied Spool request number and the target directory into the parameters
    execute the report
    required pdf file will be generated into the target directory
    i hope it will help you out
    Please refer this simple program:
    http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
    Reward points if found helpful....
    Cheers,
    Eshwar.

  • HT1918 I changed the card and i want to know how make to change the data from itunes. I tried and doesn't work.

    I changed the card and i want to know how make to change the data from itunes. I tried and doesn't work. Please, Help Me!

    No. That's not what I said. You can get an out of warranty replacement, which will be exactly the same model, color, and will be locked in exactly the same way the original is. If you want an iPhone 5, get the 4S replaced, sell it, and use the money to put toward a new phone.

  • How do I send email with pictures attached, using PSE 9 and Windows 7 ?

    How do I send email with pictures attached, using PSE 9 and Windows 7 ?

    Try email attachment workflow in Organizer. http://tv.adobe.com/watch/learn-photoshop-elements-9/sharing-your-images-via-email/
    Thanks
    Andaleeb

  • How do I send a large Illustrator CS3 file to a client that needs it for printing?

    How do I send a large Illustrator CS3 file to a client that needs it for printing?

    Hey, another way that i just discovered by complete accident is by selecting what you want to send, and in Illustrator, going to File>Save For > and then click on okay. > then you save it under Pictures or wherever you wish, and name it. Now, all you have to do is compose an email, and attach it!
    Hopefully this works for you like it does for me!
    -Alex H

  • How can I transfer photos from my  iMac to my iPad and not lose the ones already stored on the iPad.

    How can I transfer photos from my  iMac to my iPad and not lose the ones already stored on the iPad?  When using iTunes to sync a folder from the iMac to the iPad it always removes anything previously synced.
    Help appreciated
    David

    I've just found out the reason for this behaviour. I am syncing from a computer which is different to the one I first synced with. iTunes can't cope with this situation so deletes anything synced from another source.

  • ¿How do I set the calendar to start week on Monday and not Sunday in my iphone?

    ¿How do I set the calendar to start week on Monday and not Sunday in my iphone?

    The jewish calendar does not have names for the days of the week. The week ends with the holy Sabbath (Saturday) and therefore the Sunday is the first days after Sabbath (Yom Rishon), the Monday the second day after Sabbath (Yom Sheini), etc.
    The Christians believe that Christ was raised on the first days of the week (Mathew 28:1, et al) AFTER the Sabbath was over. So their holy day is the Sunday and the working week starts on a Monday.
    The business days in the western world are numbered starting with the Monday as day number 1 (Timetables of Airlines, Calendars, even Microsoft Windows...).
    Unfortunately in the United States religious freedom extends to a level which is not understood easily by the rest of the world. Since the MAC OS X allows to change the first day from a Sunday to a Monday, one might wonder why Apple decided to give the iPhone a jewish touch.
    It could be supposed that this is the way of the least resistance. Only few complain about this issue, but if it were the other way around a lot of people would complain...
    PS: I agree with the others here: It is very, very annoying and more than once I entered an appointment into the wrong day...;-)

Maybe you are looking for