How do i set 40 bit encryption on firefox 17

simple question, need answer

If you need to connect to a server that only works with 40 bit encryption then you would probably also need SSL2.
Both these haven't been present in Firefox for a very long time.
*https://developer.mozilla.org/Firefox_8_for_developers#Network
You can check a web server via a site like this:
*https://www.ssllabs.com/ssltest/

Similar Messages

How do I get 128-bit encryption in Firefox 4.0 for a financial website?

I need 128-bit encryption capability on my web browser in order to use a specific financial website for bill paying, The site's encryption test shows that Firefox 4.0 (newly installed) does not provide that level of security. Help?

I think the www.opm.gov site may be looking for the '''U''' that was in the Firefox 3.6 and earlier useragents as it was one of the things removed in Firefox 4.0 and newer useagents. The site says it recognizes the browser but does not detect that your web browser supports 128-bit high encryption which contradicts.
The "U" stands for "USA" (for the version with 128-bit encryption) (since 1996).

How can I set specific bits in a 16-bit integer?

Hello everyone,
as the title says I need to modify or rather to set a specific bit in a string which then is sent to a motor. I need to be sure that my command is correct as I am experiencing troubles with that motor and need to identify if its source.
First of all my strings have to be in the Little Endian order. Then the structure of the string should be the following:
Change Velocity command ‘V’xxCR 056h + one unsigned short (16-bit) integer + 0Dh (Note: Uppercase ‘V’)
Note: The lower 15 bits (Bit 14 through 0) contain the velocity value. The high-order bit (Bit 15) is used to indicate the microstep-to-step resolution: 0 = 10, 1 = 50 uSteps/step.
Until now, I used Flatten To String to convert 32 bit integers into bytes of the correct order. I thought I could use the Join Numbers function, but that only works for at least 8 bit numbers and there is no "1 bit number". I searched for an option to build a a string and set the bits via a Boolean Cluster, but I did not really understand how to transfer this to my problem.
How can I build up the correct 16-bit integer (e.g. set the velocity to "10000" with a resolution of 50 µSteps/step)
I would like to add the "V" and the CR via Concatenate Strings to the 16-bit integer, but other possibilites are also welcome.
I have seens the examples for bit manipulation in C-code, but I wish to do this with LabView as I am not familiar with C,matlab and so on.
Thank you very much for your help!
Solved!
Go to Solution.

You really need to learn Boolean logic and how to shift bits around.
AND is really good for masking out bits (forcing them to 0) and OR is really good for adding bit values. Then Logical Shift is used to get the bits in the right places before doing the AND and OR.
NOTE: Rate is an enum with 10 being a value of 0 and 50 being 1.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Bit Packing.png ‏15 KB

How do you set the home page for firefox for android?

I have firefox installed on my tablet. How do i set the home page or start page?

Hello lalbrecht5, see: https://support.mozilla.org/en-US/questions/953363
thank you

How I can set my default browser mozilla firefox from the command line in Windows 7?

I need to set my default browser mozilla firefox from the command line, ie without using the GUI.

'''-setDefaultBrowser''' is the correct command - you need the two capital letters.
Why Firefox 17.0.1? You would be missing a number of important security updates. Firefox 17.0.'''9''' is the current ESR release version.

How do I prioritize 256 bit encryption over the 128 bit variant?

Hello folks,
been using the fox for ages now. Thanks for the fine product :) .
Up to now I also never had a problem I couldn't find a solution for, but strangely enough, that one gets me, since I seem to be unable to find an option allowing me to deactivate the 128 bit variant of encryption.
The bank whose homepage it concerns already told me that they are offering it, and there was this nice add on that allowed me to deavtivate the rc4 protocol, but I just don't get from AES 128 to AES 256 wich I just like a banking site to have...
Any solution would be much appreciated, thanks in advance.

You can set all 128 bit SSL3 prefs to false on the about:config page to force using stronger ciphers.
Filter: ssl3*128
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)
Some websites with old software may require to temporarily set security.ssl3.rsa_rc4_128_md5 to true if you get a cipher overlap error.

How to Access a 128-bit encrypted site

Hi all..
i am new bie to this. my query is
i need to access a login page
say i have login.asp and i am passing userid and password to it
say login.asp?userid=prasanth&password=kumar if i am passing directly to POST request my browser showing result "cookies were not enabled".
i had used HttpsURLConnection and try to run its not resulting.

Is the virtual win-5a8pp4v402g server in the same domain as the remote system you are trying to browse to it from? If it is then all you need is a DNS entry or an entry in the Hosts file of the remote system that points that name to the IP address
of the VM. If its not then you will need an AAM that uses a Fully Qualified Domain Name as the address of the SharePoint site. YOu will also need either a DNS entry or a Hosts file entry on the remote system that points that FQDN to the IP address
of the VM. Here's an article on AAMs in SharePoint.
http://blogs.msdn.com/b/sharepoint_strategery/archive/2013/05/25/alternate-access-mappings-explained.aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

The time on my firefox browser is not correct. How do I set the time zone for Firefox? It is not the same as my mac computer setting?

I am using a hotmail acount with bigpond. The time that it says I sent an email is out by 11 hours... can you please tell me how to set my firefox browser to be at the right time? My mac is set at the right time zone...

I was able to do what you suggested, and the time listed in the code field was correct. However, when I sent a test email to myself on the bigpond site, it said it was received at 8:04am when it was actually 18:04. So there is an error of more than half a day. I have a snapshot of the screen if that is helpful. I asked Bigpond about this and they said it was a Firefox problem... Please advise.

How do I set a password to open firefox?

We use to have a password that was set to pop up on the opening of firefox. I recently updated firefox and can no longer find the place to do this again.

Firefox has a [https://support.mozilla.com/en-US/kb/Protecting+stored+passwords+using+a+master+password Master Password feature]. When Firefox needs to access your stored log in information, you will be prompted for a password once per browsing session.
'''Create Master Password'''
1. Click '''Tools''' on the top of the Firefox menu bar
2. In the drop-down box, click '''Options'''
3. Click the '''Security Panel'''
4. Under Passwords, click '''Use a master password'''
5. A Change password window will pop-up. Please enter your new password twice. There will be a password quality meter to help you.

How do I set the newest version of Firefox to remember passwords for websites ?

Well, ... let me restate that. I think my current version DID remember passwords for me but now it doesn't . I access the options and go to privacy and security but it doesn't highlight to allow me to click on " remember passwords........................ " How can I fix this ?

Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
You can also check that you aren't starting Firefox with a -private command line switch.
*https://developer.mozilla.org/en/Command_Line_Options
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved

How do I set my default browser to Firefox?

When a URL is in an email message and I click on it, it goes to Safari. I want it to go to Firefox. I looked through all the preferences settings and could not find an answer to this. Thank you.

This is not set in Thunderbird. Thunderbird uses your default operating system browser.
Go into Safari and tell it that it is not the default and then go into Firefox and set it as the default.

How do i set an autosize on new firefox tabs?

Instead of using the 'zoom in' function on each page when i open a new tab, is there a setting which will change the defult sizing on a page?

You can use the [https://addons.mozilla.org/en-US/firefox/addon/2592 NoSquint] extension for that.

How do I set a home page in Firefox for Android

I want iGoogle to open when I load Firefox.

Hi DOUGM500049, 
I think this will be a change on Firefox for Android 20. Currently, you can make a bookmark to your preferred page and open Firefox with it.
 
For more info on how to do this, check "How do I add a bookmark to my device's home screen?" section in this article: [[Use bookmarks on Firefox for Android to keep track of your favorite websites]]

How do you set a home page for firefox for android phone

cant seem to set a home page

The awesome bar is ok, and the bookmarks too... but they don't fill the need for a custom start page. We have it in Firefox Desktop and in all other browsers, it's a basic feature! :-(

How can I set the new version of firefox so that things I write in journals and other things are remembered in case I accidentally navigate away from the page?

In Firefov version 3 there is a feature that will remember what I have typed in a journal or note entry before posting it. This is not like an autofill because the test disappears if I navigate too many pages away from it. The usefulness of it was that if I accidentally navigated away from the page before sending my message or posting my journal, I could just press the back button and what I had written previously would still be there. I had to return to version 3.6.19 because version 5 does not seem to have this feature enabled unless you preform a very specific routine. You have to re-enable the ability of firefox to save tabs when exiting. then you have to close down firefox while saving the tab with the page you wish to write a journal on pulled up. Then when you bring firefox back up, you can type on the saved page and if you accidentally navigate away from it, you can hit the back button and it is saved. However, this goes away when you refresh the page or try it on any other page. I would like to know if it would be possible for me to enable this feature on firefox 5, or if I will have to continue using version 3.

Try using this extension. 
https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/

How do i set 40 bit encryption on firefox 17

Similar Messages

Maybe you are looking for