How do I set my outgoing email up to send mails I've entered the correct settings but still to no avail

Hi  there folks I cannot send emails from my phone , I can however receive them, my network provider is eircom I have entered the outgoing mail settings as suggested on the eircom site but still to no avail? any suggestions grealy appreciated, Des,,,,,,,,,,,,,,,,

With an internet connection, receiving email with the correct settings should not be a problem, but sending email can be a problem depending on the internet service provider being used for your internet connection at the time and if the email account provider does not have an authenticated SMTP server.
Most, if not all internet service providers block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection at the time unless the SMTP server is authenticated.

Similar Messages

  • How can I set up another email client to send mail as my dotmac account?

    My business uses an online application that can send emails to our customers as long as we provide it with an email account. I used the following from my mail.app:
    SMTP HOST: smtp.mac.com
    SMTP PORT: 25
    SMTP_AUTH: true
    SMTP USER: cryogen (my dotmac account and email)
    SMTP PSWD: ****** (my dotmac password)
    But, I cannot seem to get this to work. I tried it with another account I have with COMCAST.NET and I was able to successfully send emails using that account.
    Is there something special about a dotmac account that I am missing?
    Thanks.
    PowerMac G4 MDD   Mac OS X (10.4.8)  

    The information you’ve provided now is what I was asking for. Unfortunately, it’s still insufficient. It’s critical to know here whether the SMTP server does actually accept or reject the request of the mail client to send the message. Any conventional mail client would allow you to know that. In Mail, for example, you know that the message has been sent because Mail puts it in the Sent mailbox (whether the message arrives at the destination is an entirely different issue). And if the SMTP server rejects the message for some reason, Mail will report what the reason is.
    Whether I’ve actually set up a different mail client to send with a .Mac account is irrelevant -- I don’t even have a .Mac account, for that matter, nor do I need one. Gee, if I needed to have the same accounts as the people I help, I couldn’t be here. Fortunately, I just need to know how email works and what the idiosyncrasies of some email services are, if any.
    Try setting up your .Mac account using a conventional alternative mail client, such as Thunderbird, and you’ll see that you can do that with no problems -- or, if you have problems, it should be pretty clear what they are exactly and how to fix them.

  • How can I set a password for firefox so that everyone have to enter the password before executing firefox

    My younger sister executed my firefox just at this afternoon(she originally use IE), and she saw something that can't be seen. How can I set a password for firefox so that everyone have to enter the password before executing firefox?

    Also see this for an English version of Profile Password:
    *Profile Password: http://nic-nac-project.de/~kaosmos/profilepassword-en.html#PPF
    It is an extension to protect the profile with a password, but being an extension that protection can easily be bypassed by starting Firefox in [[Safe mode]].<br />
    So do not rely on it.<br />
    If you want to protect content then you have to use methods supported by the OS like a separate user account with a password or an encrypted file system.

  • I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?

    I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?

    If this is a Gmail account you might need to unlock by going here: https://accounts.google.com/DisplayUnlockCaptcha.

  • I have an itouch that will not let me sign in to my itunes account. The email address that it is associated with is no longer valid. I keep entering the correct password but it says that it is incorrect. I cant get a reset all of my credentials dont work.

    I have an itouch that will not let me sign in to my itunes account. The email address that it is associated with is no longer valid. I keep entering the correct password but it says that it is incorrect. I can’t get a reset all of my credentials don’t work. Now all my apps won’t work. it looks like they load for half a second then disappear. What can I do?

    - Try contacting iTunes for the password problem:
    Apple - Support - iTunes - Contact Us
    - For the other problem you can try a reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - The next standard thing to do is to download/install a new app but you cant 'do that.
    - Instead, try restoring from backup.

  • I can't turn my email or message notifications off.  I have used the off settings, but still no luck?

    I can't turn my email or message notifications off.  I have used the off settings, but still no luck?

    Are you talking about turning off the alert sound when you receive messages and email?  If so, go to Settings>Sounds>New Mail>scroll to the top and choose None.  Do the same for Text Tone.

  • How can I set up an email user as "send-only" (no mailbox for receiving)?

    Can anyone tell me how I can set up an email account that can send emails but not receive emails.
    Our Web application has been using a generic email address "[email protected]" in all of our PHP Web applications as the sending email account. I have this user set up in WORKGROUP ADMIN as a proper account. However the account gets tons of SPAM emails and is constantly filling up.
    Also, all of the email accounts require SMTP authentication to send emails.
    Is there any way to identify an account as a send only account so we can generate emails from our Web applications that cannot be replied to?
    Thanks for the help
    -- Jon

    Doing so will cause issues. If you send out mail which to an outside server appears to be non existent, mail may be rejected and you may even be blacklisted.
    You can remove the account from WGM and add a role account as an alias send to /dev/null. This will look to the outside world like an existing address, but simply be discarded on your system. You should however include a working address in your mailings for people to be able to respond.
    Assuming you use local domains, edit /etc/postfix/aliases and add:
    noreply: /dev/null
    (you can change noreply with the sender used in your PHP apps, but I'd probably change the PHP apps to use noreply as this signals to people receiving your mails that this address is unattended).
    When done, issue:
    sudo postalias /etc/postfix/aliases
    sudo newaliases
    sudo postfix reload
    HTH,
    Alex

  • How do I set up my email on Windows Live Mail on Windows 10

    Upgraded my Window 8 to Windows 10.  I also have a laptop with Windows 7.I am trying to set up my email (using Windows Live Mail) on the computer with Windows 10.  I typed in exactly how it is on my laptop, but it won't work.  Anyone able to help?

    If it will not verify, that means that one of the settings that you have done for the account is incorrect. Check back with the email provider to make sure you have all of the settings required, that they are correct, and lastly to make sure that you are entering all of the correct information in the correct places.

  • My new 4s cannot send emails; emails are rejected by server. What are the correct settings?

    What are the correct settings when my new 4s can receive but will not send messages. The emails are rejected by the server,

    You're going to have to ask your e-mail provider. We don't have the slightest clue who that is, much less what the correct settings would be.

  • How do I delete an outgoing email that keeps crashing Mail? I sent it out to too many recipients.

    I tried to send the email to 326 reciepients and got an error message that Gmail couldn't send it. When I tried to close the email, It won't close. I followed one comment that said to get off the internet and re-launch Mail again. I tried that and it didn't work because the outgoing email kept coming up. It will not allow me to force quit either. I have also tried closing down and reopening the system - still no luck.  Please help. Thanks in advance.

    Try launching Mail after disconnecting from the Internet,, or find that .emlx file in the Finder & trash it.
    Folder somewhere in...
    Users/YourUserName/Library/Mail/

  • How can you set up your subdomain pages in a subdirectory to show without the subdirectory name but the subdomain instead

    I am trying to understand how I can set up a series of pages for each of several subdomains such that when you view that web page it shows on the subdomain without the subdirectory name. Essentially I suppose I am wanting to point the subdomain at a folder...
    For example I have my main site with the domain mysite.com.au and have 3 subdomains sub1.mysite.com.au, sub2.mysite.com.au etc... I want to then store the pages relating to each subdomain in their own subdirectories /dir01, /dir02 and /dir03 or otherwise named as something appropriate.
    What want is to I have the page page1.htm in each of these subdirectories such that I can view the page with the url "http://sub1.mysite.com.au/page1.htm" and have the url displayed as such once loaded rather than having to enter http://mysite.com.au/dir01/page1.htm
    Is this a simple or complicated process to put in place?

    Hello Julie.
    Your junk filter appears to not be working properly. Try this first:
    1. Go to Preferences > Junk Mail and disable junk mail filtering.
    2. Quit Mail, then open it again.
    3. Go to Preferences > Junk Mail, enable junk mail filtering, and configure it however you wish -- I recommend you to leave it at the default Automatic settings.
    4. Reset the junk filter database (Preferences > Junk Mail > Reset).

  • My Sprint cellphone has not received emails since yesterday and I entered the correct settings incoming and outgoing from my Thunderbird email account, advise?

    I have not received emails on my Sprint Galaxy S3 since yesterday morning. I can send but not receive. I have matched my settings to the phone from my Thunderbird account. I thought I had everything synced. Sprint told me there may have been a change in server settings from Thunderbird but I never received any notification from Thunderbird. I am at a loss and not very good at this so any help will be appreciated.
    If anyone can answer and I don't respond quickly, I will answer as soon as possible. Thank you.

    Thunderbird is not an email provider. It has no servers to have settings to be changed. It is email client software just like the one you have on your phone. You would need to get the correct server settings from your email provider and set your phone to use them correctly.
    Too bad that the "helpless desk" at Sprint is not smart enough to know that.
    Thunderbird software does not run on any mobile phones so troubleshooting your phone is outside the scope of this forum.
    One thought, is your email account set up as IMAP or POP?
    You really need an IMAP account if you are going to use multiple devices to check your email. If you use POP and have your computer set to remove the emails off the server then there are no messages left on the server of your email provider for the phone to download. IMAP email is server based and the messages are left on the server and remotely viewed by the remote devices.

  • How do I set up an email program to send Excel attachments?

    When I try to send an Excel file, I'm told there is no email program set up to send the file

    What are you using for email now?

  • How can I set my default email address when sending new messages

      I have 2 accounts in my Mail Preferences, hotmail and gmail.  I have tried to set it so when I send a message to a new recipient  it is my gmail one that is used as default.  However,  it is thehotmail account that is always ticked first.
    I would like to set my mail preferences so the gmail is my default first choice in sending new messages and is ticked as my default email address.
    thanks for reading
    gus

    gus,
    Have you gone to Mail>Preferences...>Composing>Addressing:> and selected "Send new messages from:" your preferred account?

  • Just got U-verse today, how do I set up speed dialing on my phone, I had it with the ATT service, but it does not work with the UVerse

    OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
    Looks like the simple part is using it  - just press and hold the digit to dial the whole number.
    So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)

    Seemed like there should be a speed dial, so I did  a search & found the cure is worse than the disease -
    Dial from your phone
    Make calls directly from your existing touch-tone home phone:
    Local calls: Dial the 7- or 10-digit phone number.
    Long distance calls: Dial 1 + area code + 7-digit phone number.
    International calls: Dial 011 + country code + 7-digit phone number.
    Dial online from your myAT&T account
    Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
    Log in to myAT&T. Don't have a myAT&T login? Register today!
    From the I want to menu, select Manage my plans and services and then Manage my phone features.
    Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
    Enter a number to dial or select a number from your Call History or Address Book.
    Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
    Select Place Call.
    When your home phone rings, pick it up to place your call.
    Important Note
    To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
    Dial from your U-verse TV
    With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
    Tune to Channel 9900 using your U-verse TV remote.
    Select a U-verse Voice phone number on screen.
    Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
    Scroll using the arrows.
    Select a number and press OK to return a call.
    Select Call and press OK.
    When your home phone rings, pick it up to place your call.
    You can have a call list accesed from a browser.
    You can call back a historical call from the browser or TV.
    https://www.att.com/esupport/article.jsp?sid=KB401002

Maybe you are looking for

  • ISE 1.1.1 (Fallback to local Vlan if radius server is found to be dead) not working

    We have configured following commands on switch to fallback to local Vlan if both radius server (policy persona's) is found dead. For test purpose we shutdown both servers (policy persona's) but fallback didn't work. We have 3750 switch running image

  • Safari & mail Icons will not stay in the Dock?

    Two days ago I noticed that both Safari & Mail icons were not in the dock. I opened applications and returned them, they just vanish, when I open them from apps they both work OK. I have worked round the problem by using an alias and placing that in

  • Will Solaris 2.7 device drivers work in Solaris 2.6

    I have three systems running Solaris 2.6 for a customer application. My customer has requested a fourth system. The new system has the newer SCSI host adapter AIC-7890. Solaris 2.6 does not recognize the adapter and will not allow me to boot from the

  • Creating a webpart that is only visible when an image link is clicked

    Hi,  Is it possible to make Webpart in Sharepoint 2010 only appear when a link or image is clicked? i have 5 image buttons on my site page and for one of them, when it is clicked, the user will be directed to the Contents webpart i have created. This

  • The while(false) loop

    came across a neat piece of code today which had me staring for a while bcos of the while(false) clause. it doesnt do much but can be very helpful when u have a lot of if/else if statements do     if ( condition1)        //do something        break;