How do I set PhotoStream to name files automatically as "YYYY-MM-DD hh:mm:ss"?

How do I set iPhoto/PhotoStream to name files automatically as "YYYY-MM-DD hh:mm:ss"? I have iPhoto version 9.5.1.

Do you want to upload the photos with a date-time format as a filename or download?
The PhotoStream does not support renaming the files. It will use the filenames of the original image file. So the only option is to rename the files before sharing to My Photo stream or after downloading. You can batch change the titles using the command "Photos > Batch Change" and set the title to a format with date and time. Then export the versions and use the title as filename and reimport. Then share the renamed photos to your photo stream.
A rather tedious work-around, and it does not give you the exact format you want. There is no good way to do it, just like TD said.

Similar Messages

  • How can I set up cross fade to automatically trim files ?

    How can I set up cross fade to automatically trim the two files to size when fading between them? Thanks

    Hi, thanks for the reply. What I meant was that in Pro Tools, you can highlight an area between two tracks and crossfade. Then the files are exactly trimmed automatically so there is no excess overlap of the edges of both files. In Logic it seems to leave the overlap, and this can be a problem when you accidently click the wrong place and the underlying file is bought to the front, changing the crossfade area. I wish it to trim the excess so there is no danger of the lower file edges coming forward.

  • How do I set up my mail to automatically reply that we are on holiday?

    How do I set up my mail to automatically reply that we are on holiday?

    From Mail Help:
    You can create a rule to have Mail automatically reply to incoming messages. For example, you can set up a rule that’s triggered by a specific subject so that Mail replies automatically to all messages with that subject.
    This feature is useful if you receive a lot of similar messages from an online form on a website, and you want to reply automatically.
    To automatically reply to messages:
    Choose Mail > Preferences and click Rules.
    Click Add Rule and type a descriptive name for the rule.
    Set the conditions necessary for the rule to apply to a message.
    From the “Perform the following actions” pop-up menu, choose “Reply to Message.”
    Click “Reply message text” and enter the text for your reply message.
    Mail will include the text you enter, along with the full text of the original message, in the message that it sends.
    Mail must be running to automatically reply to messages, because rules aren’t processed while your computer is shut down or you’re logged out. To set up automatic replies while you’re on vacation, ask your email service provider how to set up an out-of-office reply.
    Carefully consider the rules you create for sending automated replies. If they’re too broad, you can send messages inadvertently or create message loops (replies to replies you sent). If possible, test the rule.
    After a rule has processed a message, the message’s status icon changes to a gray arrow to indicate a reply was sent.

  • How do I set the column content to automatic break lines

    Hello Guys,
    I have a problem with the column width and the column content of a standard report. Within the report are hugh entries which aren't interrupted by an space character. I set my column width to a special value by usingen "css style: display block; width: 300px;". Now the problem is that some of the column entries have a longer width than the column width is setted. So they overlock the entries of the column next to them.
    My question is: How do I set the column content to automatic break lines after a certain count of characters?
    After researching a couple of websites and discussion thread I found maybe a reference to the solution. I hope it help you to give me an answer.
    COLUMN LAST_NAME FORMAT A4
    regards
    wderr

    Wderr,
    PDFs are another animal entirely. Try adjusting the width of the column under the Print Attributes tab of the report.
    If that doesn't work you'll probably need to create custom XSL-FO layouts which, depending on the tools you have at your disposal, could take some time.
    Regards,
    Dan
    Blog: http://DanielMcGhan.us/
    Work: http://SkillBuilders.com/

  • Is there a way I can set iTunes to add files automatically from a folder in my Windows PC?

    Is there a way I can set iTunes to add files automatically from a folder in my Windows PC and ensure that it is synced automatically? For example, if I add or modify a file in that folder it should be added to iTunes automatically. At the same time the original files in the folder should not be re-organized. That is can I just point to a music folder in my hard drive and sit back for iTunes to do the rest?

    Rishitani wrote:
    ..is there a way i can get it to start apart from restoring...
    Nope.
    Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • How do i set my ipod touch to automatically turn off after a certain amount of time?

    how do i set my ipod touch to automatically turn off after a certain amount of time?

    Please check "My Music Timer" app.
    "My Music Timer" can stop iPod touch or spotify playing music.
    https://itunes.apple.com/app/id787182095
    Thanks

  • How can I set the Object Name to the file name on import?

    All-
    I've been manually typing the filename into Aperture's Object Name metadata field. Is there a way to do this automatically? I use metadata presets to fill in many other fields on import but haven't found a way to set metadata fields on a file-by-file basis.
    Perhaps there's a way to do this with the thousands of images already in my library as well...
    Thanks,
    Andreas

    Here's the cleaned-up version:
    tell application "Aperture"
    set selectedImages to the selection
    repeat with i in selectedImages
    set tName to name of i
    set value of IPTC tag "ObjectName" of i to tName
    end repeat
    end tell
    Some other related bits, which you can probably work out how to put into the above script:
    Find out the AppleScript names of the IPTC tags (but only tags which have a value for that image), the names will be listed in the 'result' pane in the Script Editor:
    tell application "Aperture"
    set selectedImages to the selection
    get name of every IPTC tag of item 1 of selectedImages
    end tell
    The same for EXIF tags:
    tell application "Aperture"
    set selectedImages to the selection
    get name of every EXIF tag of item 1 of selectedImages
    end tell
    And for any custom tags you have set up. If you haven't set up any custom tags (one of my main reasons for going with Aperture) this will just return camera and picture time zones:
    tell application "Aperture"
    set selectedImages to the selection
    get name of every custom tag of item 1 of selectedImages
    end tell
    Finally, keywords:
    tell application "Aperture"
    set selectedImages to the selection
    get name of keywords of item 1 of selectedImages
    end tell
    To grab the first keyword name try 'name of keyword 1 of...' etc.
    To grab the parent keywords for hierarchical keywording stuff try experimenting with 'get parents of keywords of'. The keywords seem to be read-only from AppleScript, so a magic script that added all parent keywords doesn't seem to be possible.
    Ian

  • Open Another Project - how do I set up the published files?

    I created a Menu project that launches (via buttons) two other projects. Each of these other projects has a button to return to the Menu. I copied the published set of files to each of the Callees folders. So, Menu\Callees has Run 1 and Run 2 folders (all the published files) Run 1 and Run 2\Callees each have Menu folder with all the published files. Menu launches Run 1 and Run 2 fine but the Menu button on Run 1 and 2 works once, then I get this:
    No webpage was found for the web address:file:///C:/Users/Jeff/Documents/My%20Adobe%20Captivate%20Projects/menu%20test/Menu/callees /Run_1/callees/Menu/callees/Run_1/callees/Menu/index.html
    Anyone have a simple explanation for how I should be setting up the published files?
    Thanks so much,
    Jeff

    Thanks Rob,
    Would running these from a web server resolve the file location problem I asked about? I tested the SWF version on my HD and got a similar error message (this time looking in the root directory, not the callees folder.) Can you point me to a reference re: how to set up files when running another project?
    Thanks,
    Jeff

  • How do you set restriction on the files you can open?

    Hi!
    How can I set a restriction on the JFileChooser dialog? I only want to be able to open .dat files. Does anybody know how?

    Hello
    To filter out files you need to create a subclass of FileFilter and perhaps a subclass of FileView that will store an icon for the file type .dat.
    Take a look here http://java.sun.com/docs/books/tutorial/uiswing/components/filechooser.html#filters
    Hope this helps
    David

  • Computer Crashed! How do I set up itunes w files on an external hardrive?

    My notebook has a corrupted hard drive and went to junk when I tried to install Service Pack 3 for XP and I cannot get it to run. How can I set up itunes on a new computer when I cannot open itunes in my old one and use the ipod to synch or burn CDs as support suggests? I have all of my music files on an external hardrive and am hoping I can use this to set up on new machine; however, I cannot find any guidance on how to do this or if possible.......
    Thanks!
    PS--I did have itunes 7 installed on the PC before it crashed.

    See this http://support.apple.com/kb/HT4527
    Also, follow the steps given here...
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • How do I set up my InDesign file for a Perfet Bound 80 Page book when i have images overlapping a two page spread

    I am looking to create a photo book that is going to be perfect bound. How do I set up the pages in InDesign so that the images that span two pages line up correctly?

    Are you printing this yourself, on a network copier for example? If it's going to be printed on an offset press, it will have to be imposed by prepress techs, and it's their job to make sure that the pages are aligned correctly. There will be some part of a cross-spread image that will be lost in the spine, and their imposition method will take into account whether pages need to be moved outward from the spine by small amounts (called creep) to compensate for the wrap-around that is a part of bindery, but perfect binding isn't as bad as saddle stitch as far as that goes. Talk to your printer, but you will likely just need to compose the book in normal facing-page readers spreads and provide a multi-page PDF (not exported as spreads). They will impose the pages into printers spreads, and thank you for not doing that yourself. There will be aspects of their production that you won't or can't know about, and if you impose it, it will just make it harder for them if they have to undo what you have done incorrectly.

  • How can I set a default save file for scans using the Solution Center?

    Using Windows 7 - 64 bit.   HP Photosmart Premuim C-309a All-In-One Printer.
    Because of a Windows crash, I had to install a new drive and reload Windows. I also reloaded other software like the HP Solution Center & Drivers. My problem is that I can't find how to set a default folder for my scans.  This is NOT mentioned in the user manual but it was originally accomplished by HP Tech Support when the printer was new.  Can anyone relate how to set default folders for my scans?
    Thanks.
    Tango
    This question was solved.
    View Solution.

    Here is a document on how to scan through Windows 7. 
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03476857
    Click either solution center or the icon of the printer on your desktop. Here select "Scanner Actions" (or the analogous selection). When the window pops up from the HP software it should provide you with options for file type (.tiff, .pdf, .jpg) as well as resolution and media size. Here on this page there is also an option for you to go to the advanced options. Using this you can alter the default safe folder. 
    Let me know if that helps you out! 

  • How can I set in ps the "file info" autofill option?

    Hi,
    finally I have found how to edit my file info inside Ps, I have created an average file info, my name, my website, and other contact info, and i want to add these information to all of my future works description.
    In this picture, there is an auto completion option, what does this mean? I want to these informations will be applyed automaticly whithout my intervention. Is there any way to do this?

    Allthough I have never used them I would investigate templates in Bridge.  Here is one link http://www.photometadata.org/META-Tutorials-Adobe-Bridge-Creating-Metadata-Template

  • How can I set the workgroup templates file location in Office 2013 to point at a folder stored on Sharepoint (2010/2013)?

    Hi All,
    Been doing quite a bit of research on this but drawn nothing but blanks or alternative suggestions, none of which are viable.
    So the outline of the issue:
    Deploying Office 2013 suite to organisation and wanting to have custom templates available for users to choose from, but want those templates to be centrally stored and managed on a SharePoint site. 
    In Word 2013, for example, when you create a new document, you are presented with a page to choose from 'Featured' templates (or blank document)
    So, if you wanted to have custom corporate templates, you could modify the file location for work group templates, thus creating a Custom Office Templates folder locally on your PC. 
    Great. This means when you select 'New' in Word 2013 you can pick from the 'Featured' templates, or the 'Personal' templates area.
    However, I have a collection of test corporate templates (for Word, Excel, PowerPoint etc). These are stored on a SharePoint site internally. 
    If I try to modify the work group templates location in Word 2013 to point towards my SharePoint site (or any HTTP address for that matter) it won't work.
    I know that I could point it towards a Network Share location instead, but I don't want to do that. 
    Is there any way of getting it to point towards a SharePoint site, any way of modifying it? Or perhaps an even better solution that I could use? 
    Any help, thoughts or ideas would be massively appreciated! And forgive me if any of my logic is off, but it does seem like this should be a straight forward thing to do given that Office and SharePoint are both developed by Microsoft and you
    would like to think they would inherently have better links!
    NOTE: Going to Office 365 is also not an option either!
    Eagerly awaiting an answer from someone incredibly clever!

    Hi Tony, 
    Thanks for your response but this is not what I was looking for. 
    Those articles relate to setting a default template in a SharePoint document or form library.
    I will try to be more concise.
    What I want is:
    (1) For users to be able to load MS Word 2013 on their laptops/desktops (connected to corporate Wireless/LAN)
    (2) Once they have opened MS Word 2013, I want them to be able to choose a template from the welcome screen. (There are MS Word Defaults like 'Blank Document' or 'Cover Letter' etc)
    I want to add a second tab which is called 'Personal' or 'Corporate'.
    (3) MS Word 2013 allows you to create custom WORD templates and save them locally on your machine (either in the default location for templates, or a user-specified custom location (e.g. My Documents, Desktop etc).
    (4) In advanced settings, there is an option to modify file locations. This is where you can point MS Word 2013 towards the folder (locally) that contains the personal templates that you have designed which you want to use.
    (5) QUESTION: Is there a way to have lots of corporate WORD templates (perhaps one for Marketing, Sales, Procurement, Project etc) - Basically LOTS of different templates all stored in one location on SHAREPOINT, or in a SharePoint document
    library. THEN... once those templates (documents) are stored on SharePoint,
    IS THERE A WAY to go back into the advanced settings within MS WORD 2013 and modify the file location for templates so that it points towards the SharePoint document library? 
    I want all the templates to open in MS Word 2013, not within a browser, and I don't want users to have to go to SharePoint to find a template, I want it to be integrated into their local MS Word 2013 so they can choose a corporate template the moment they
    load up MS Word 2013.
    When I have tried to modify the custom file location for templates, I can only set it to an address locally on my machine, or a network address (mapped network drive). 
    However, I do not want the templates to be stored on a shared network folder, I want them to be in a SharePoint Document Library. 
    The issue I have found is that I cannot enter a SharePoint Library URL as my file location, nor can I enter any HTTP address. 
    IS THERE A WAY AROUND THIS? 

  • How does one set the Network Name of the Printer

    Hi,
    I have two 7525's on my home network.  How do I change their names from the default serial number based name to something meaningful so IOS/Android users can easily tell which printer is which?

    Hi,
      Greetings of the day!
    There are many ways of achieving the above and the easiest way is mentioned on the link attached below :-
    http://windows.microsoft.com/en-in/windows/rename-printer#1TC=windows-7
    The above applies to other windows OS as well as win7.
    And to make it meaning ful, you would need to get creative  
    If you have any queries related to the same OR any other do reply.
    Regards,
    Mohammed

Maybe you are looking for