How do I set up LiveRig or TouchOSC with Mainstage 2.2.2? Both apps send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI?
As I said before both app's send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI on the network set up, which I think I did right. I have tried MIDI Disigner and Mainstage shows MIDI activiti, what can I be doing wrong?
Thanx in advance.
I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay.
Similar Messages
-
2 Mac can not see each other via airdrop under the same airport/timecapsule.
I have 2 iMac in my home with a TImeCapsule (gen4).
The wifi is on both 2.4G and 5G with the same SSID.
iMac A is working on 2.4GHz, iMac B is working on 5GHz.
So they can not see each other via airdrop, meanwhile they can see each other in the left panel of Finder.app
Is it a known issue of AirDrop?Hi Kirby Zhou,
Welcome to the Apple Support Communities!
It sounds like you would like to utilize file sharing between computers, not necessarily AirDrop. Please refer to the attached article for information on the file sharing process. If this is not what you are looking for, please let me know.
Share your files with other Mac users - Mac Help
Best regards,
Joe -
I have a mid 2009 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?
As far as I know the older mac is compatible with AirDrop.
ThanksSo by dual-signal, are you referring to 2.5Ghz/5Ghz signal?
I'm pretty sure my Mac mini 2011 has that but for whatever reason I cannot send via AirDrop to the mini. The mini can see other computers like my 2010 MacBook Pro and send files to it, but not in reverse. The MBP is unable to see or send to the mini unless the mini has engaged it to send a file to MBP. Even then it's temporary and the mini will disappear from the MBP's AirDrop radar upon completing the delivery of its file.
So I'm a bit perplexed on how the Mac mini has AirDrop, can see other AirDrop computers and send files to them, but cannot be seen on other Macs to reciprocate. -
How can i Flash and restore the firmware ( EFI ) from a Macbook pro ( late 2008 , 5.1 ) ??
How can i Flash and restore the firmware ( EFI ) from a Macbook pro ( late 2008 , 5.1 ) ??
Please help me !!The Seagate backup drive I bought doesn't support 10.5.8
The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes. -
I was updating my ipad2 to iOS.5 version, and somehow the iPad turned of and the update was not finished. When i turned on the iPad the computer nor iTunes could recognize the iPad. I have windows xp. How can I solve this issue?
Try throwing it into recovery mode and starting over.
http://support.apple.com/kb/ht4097 -
IMac and Macbook can't see each other via Airp
Except sometimes.
Using Leopard on both new machines, I can share Internet connections and printers fine. The problem is in trying to mount volumes or share files.
I create a network on the iMac, connect to it on the Macbook, and use the appropriate password on both machines. I've set file sharing preferences perfectly and confirmed that at the store.
Sometimes, from the Go menu I can find one machine from the other. Sometimes I can't. When I find them, file sharing and accessing work fine--although for some reason, the volumes do not mount on my desktop! I have to use the Go Network menu item.
But other times they just don't see each other. I only get this to work by REPEATEDLY logging out of networks, turning Airport on and off, creating new network names, and so forth.
The worst results come from creating a familiar network with a name and password I've used before. The best results come from creating a brand new network, new name and pswd. And creating the using 128-bit WEP is the worst, but I think that sometimes that works, too.
My question is, am I doing something wrong, or is this another Leopard/Airport bug?
Also, if I can access the other computer in Go Network, how come the volume doesn't mount on my desktop??
Thanks.Don't know if this will help - but if you're using an Extreme base station go to the Airport Utility and look at the list of DHCP Clients. I had the same problem only I had an iMac and a Macbook running OS 10.4.11. Turns out that my printer and my iMac were sharing the same IP address. When I assigned a permanent address to the printer (out of the normal distribution range used for the other computers) the problems all went away. So, for instance, if the router was assigning IP addresses ending in 10.0.1.199, 198, 197, etc., and the primary computer ended witih 200, I named the printer 10.0.1.201
Hope that helps. -
How can I set up icloud phote streaming to my home computer?
When I follow their directions my comuter does not show the Icloud icon uner the control panel / netwrok internethttp://www.apple.com/icloud/setup/pc.html
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required). -
HP Envy 120 printer and Macbook Pro won't talk to each other...
Hi
I have a shiny new printer and a fairly new Macbook Pro and simply cannot get my printer to 'talk' to my Mac.
The printer is connected to our home internet and the Internet report you can print off says everything is fine.
We have done the Apple > Software update etc to make sure the latest drivers etc are installed. (For info, we are on OS X 10.8.5). However, when we then try to print something, it comes up as no printer installed and there is no 'nearby printer' showing, which I believe should be showing there. (We have tried adding manually, too, using various settings and can't do it that way, either.)
When this didn't work, we downloaded the relevant driver from the HP site (to see if this would help, but it didn't).
After downloading the driver, we go through the installation process and what happens is that it doesn't have our printer listed and asks that we connect our printer. When we connect it, it recognises it and we then proceed. It then says your printer is now connected and you may remove your device. When we remove it, it then does not have any device listed and we cannot progress any further. Stuck in an infinite loop...
Also, firewall and security settings are fine.
I've also restored default settings on printer etc and started over a number of times.
Any help would really be appreciated.Kodak has drivers for up to Mac OS version 10.7 on their website here:
http://support.en.kodak.com/app/answers/detail/a_id/41686/selected/true
Did you try downloading and installing them? -
My daughter put a password on her Ipad2 and forgot her password. She entered the password wrong 10 times and now her Ipad says that it's locked and disabled. How can I reset or unlock her IPad2?
thank youYou cant reset the password. You will have to restore the device within iTunes and you will want to use the same computer that you sync with if you want to restore all of the app data and app settings.
This article will explain how to restore the iPad.
http://support.apple.com/kb/ht1414
Howver, you will probably need recovery mode in order to bypass the passcode. You can read about it here.
http://support.apple.com/kb/ht4097 -
Mac book pro power adapter mixed to each other how to identify
dear i am facing some issue in our office .
issue is our macbook pro charger has mixed to each other.
for that i am facing some charer support issue when it is not working.
how can i identify .
I have more than 100 mac book comp.First off, for the regular MacBook Pros (non-Retina) there are basically two sizes: large 85W and small 65W. Large is used on 15" and 17" models, small on 13" model. They are physically different in size too and are labeled along the edge.
Retinas use an 85W power brick, but the connector at the Mac end is MagSafe II, which is very smaller than the regular MagSafe used on non-Retinas. No way to confuse and no way to plug them wrong.
BTW, if an MB Air got mixed in there, they use an even smaller 45W brick. But you mentioned MBP. -
my wife and I have iPhones and separate accounts with icloud. Is there a way that we can merge them together through icloud to allow us to see each other's calender?
It is very difficult to do this if you want it to look a bit convincing, but if you don't want something very realistic but just to do it for fun it may be doable.
What you want is to put one clip atop the other and use a mask.
If you use a still image of your baby and your moving lips do not move a lot within the frame, this looks possible and not too difficult.
Apply the "Vignette Mask" to your clip and adjust its size, position an fallof parameters so that the vignette captures just your mouth. And use the Transform tool to resize and position over your baby's mouth.
You may end up with something a little better than this quick and dirty example I just made :-)
Edit: just after I posted I realized that Karsten beat me :-) -
My wife and I have shared one iTunes account for 6 years. We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc. Is there a way to move music/apps from one ID to a new ID?
JoeyV325 wrote:
Is there a way to move music/apps from one ID to a new ID?
No.
One of you create a new AppleID and one use the existing AppleID.
But you can still use the items in each iTunes library.
Create separate computer logins for each of you.
This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library). -
I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button to navigate back to my starting point the bookmarks are replaced by "page thumbnails". Is there anyway to stop this from happening?
Hi Pusman,
While setting up the links, if you choose to open the file in a new window then you won't face this issue, then you can simply switch to the previous file and bookmark view will remain as it is.
Does that helps with your query?
Regards,
Rahul -
cannot pair iPhone4 (iOS 7.1) with Macbook air (iOS 10 yosemite); they do see each other but will not connect via bluetooth
That is because they do not generally pair. What is it that you are trying to do by connecting them via Bluetooth? If you are referring to AirDrop or continuity, then all you need to do is have Bluetooth turned on, they do not pair.
-
ok so i am trying to home share with my roommate and we can see each others music but how to i put his music into my itunes so that when we dissconnet it will still be on my computer ? we are both on version 11.1.2 of itunes
Welcome to the Apple Community.
Select the content you wish to import and use the import button at the bottom of the screen.
Maybe you are looking for
-
How do i turn on voicemail that says my number is not in their system
How do i turn on my voicemail if when i call it, it says its not in their system?
-
Hi I see a good price in the nokia E52 and I wish guys to tell me is it a good phone to use and is there any kind of factory defect in software and Bluetooth and wlan please tell me every thing about this phone even if the problem is small tell me pl
-
Personas 2.0 1. Is flavours are transportable from dev to QAS to PRD. If yes how it can be achieved.? 2. How the flavours can be assigned to users or user groups? Please advise
-
How do I lower the applemobiledeviceservice.exe*31 cpu usage?
How do I lower the applemobiledeviceservice.exe*31 cpu usage? It is running between 10-16% of my cpu usage for my laptop. Even if I shut it down in the windows task manager it starts back up in a few minutes. I am running windows 7. Thank You for you
-
hi all, We are trying to authenticate cisco 7921G wireless phone through EAP-TLS.. getting error message in ACS server EAP-TLS or PEAP authentication failed during SSL handshake but EAP-TLS works fine with same ACS server when user machine is connect