How do I show the first record as selected on the first load of a Master/Detail html page?

I have been looking for any reference to setting a selectrow onload or defaultrow and it seems all references to answers lead to missing pages or examples.
I have created a master detail page using the insert spry function in DW5. I have had no trouble making it work or changing the css to show a selected column 0 (master) after the first click, but I would like to see the default first row shown as selected.
I am such a javascript noob I need an example if possible.
I followed Greg Rowis's example on AdobeTV "Creating A Progressive Enhancement" but this was not addressed.

Thank you for the reply but it was not quite what I needed.
My html div was/is
<div spry:region="ds1" class="MasterContainer">
    <div class="MasterColumn" spry:repeat="ds1" spry:setrow="ds1" spry:hover="MasterColumnHover" spry:select="MasterColumnSelected" >{Industry}
    </div>
</div>
With the col0 renamed Industry and this works when I click (select) an Industry I get a change in my display to show which row is selected.
See http://dev.workway.com/
What I want is to have About Workway selected on page load. It is the default display but is not shown selected.
Thanks again for your help.

Similar Messages

  • How do i show a movie from my mac to the television?

    how do i show a movie from my mac to the television?

    Hello there, kojak100.
    The following Knowledge Base article goes over how to sync content to your iPad:
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/ht1296
    This section may prove useful:
    USB syncing
    Open iTunes.
    Connect the iOS device to your computer using the included USB cable and click the device button in the upper right corner. (If you are viewing the iTunes Store, click the Library button in the upper right corner. The device button will then be visible.) Some tabs may not appear if you do not have corresponding content in your library. For example if you do not have any podcasts in your library, the corresponding Podcasts tab will not appear.
    You can configure the different content types in each tab. For example, movies under the Movies tab.
    To sync, click Apply, in the lower-right corner of the screen.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS

    How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS.
    I have tried all sorts of ways of adding my personal M4R file but can't find the place (within the UK versions of iTunes} to transfer this file so that I can select it as a ring tone.
    I've tried also changing to the US version of iTunes and still can't find a way of doing it, although I have heard that it can be done.

    You should be able to just drop it into the library within iTunes.
    http://cnettv.cnet.com/create-free-iphone-ringtones-using-itunes-8-0/9742-1_53-5 0003920.html
    Check out the video above for a lot good info. The ringtone must be less than 35 seconds.

  • Is it possible to make is so that, immediately after I import a new clip into FCP, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work).

    Is it possible to make is so that, immediately after I import a new clip into FCPX, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work). Right now, after I import a new file, I have to then go searching for it amid all the other files in my project. It would be extremely helpful if the file I just imported was already highlighted and selected after import, making it instantly "locatable" and ready to go.

    Kryan73 wrote:
    …  after I import a new file, I have to then go searching for it amid all the other files…
    in a perfect world, you do know the recording date, and you simply scroll to that date.
    in a very perfect world, all your other imports are already tagged, so just have to create a smart list 'unrated' ...
    (I know those messy Events… a friend of mine constantly ignores my advice to check the time/date on his camera; on every battery swap, the cam creates a very erratic timestamp ... his actual recordings are listed as made in "2004" or in "2020" .... )

  • Please help me with the accounting records of iTunes. At step in placing credit card details are asked to contact iTunes Support

    Please help me with the accounting records of iTunes. At step in placing credit card details are asked to contact iTunes Support

    Brenda, the easiest way to contact the support team is thru the iTunes Customer Service website:
    http://www.apple.com/support/itunes/contact/

  • Photos that have been deleted to aperture trash cannot be viewed. Any assistance is welcome in fixing this bug. The showing all files option is selected in the filter. System is 10.8.4, aperture version 3.4.5

    Photos that have been deleted to aperture trash cannot be viewed. Any assistance is welcome in fixing this bug. The showing all files option is selected in the filter. System is 10.8.4. Aperture version 3.4.5. Used to be able to view the files then all of a sudden they have stop appearing. Once the aperture trash is emptied the files can be viewed in the system trash. Becomes quite annoying if you want to review the aperture trash files before deletion.

    Photos that have been deleted to aperture trash cannot be viewed  ...
    The showing all files option is selected in the filter.
    Cookiemonster, previously Frank Caggiano's magic helped in this situation - have you tried the double, double Caggiano as described here?
        Images not appearing in browser, search filter is cleared
    https://discussions.apple.com/docs/DOC-3062
    In the most recent version I cannot get this trick to work, however. But try it anyway, maybe it is just my macthat has an issue.
    Did this happen directly after the update? Where is your library located, on an external or an internal drive? Are your originals managed or referenced?
    I'd try next to check, if this is caused by the library, by creating a small test library and trying to trash pictures there. If it works well in a new library try to repair the database and the permissions on your regular library.  See:
    http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=27%26se ction=10%26tasks=true
    Regards
    Léonie

  • Was the emergency records file deleted with the Mountain Lion operating system?

    Was the emergency records file deleted with the Mountain Lion operating system?

    It's a Quicken file & I was able to open same.  Not used often & the copy in my documents wouldn't open, but it did in the Quicken app that's friendly with Mountain Lion.  Learned something new today!

  • Is there a plugin that can copy the coordinates of a selection to the clipboard?

    Is there a plugin in existance, that I can make a selection in Photoshop and then copy the coordinates of that selection to the clipboard?
    I am a texture artist and frequently lay a number of graphics out in one file, before typing out the coordinates for each element. Currently this is a slow manual task, but could be made so much faster if I didn't have to type everything out.
    Thanks,
    Matt

    I have to admit to not fully understanding your work flow, but to the extent I do Here is what I suggest:
    I would open your image and create a new action and start recording. I would then create the rectangular selections in sequence and stop recording when you are done. Then I would save the action as a text file. The resulting text file for a test image, having created three different rectangular selections, looks like this:
    Action: Action 1
            Set Selection
                To: rectangle
                Top: 0.451 Inches
                Left: 0.917 Inches
                Bottom: 0.559 Inches
                Right: 1.017 Inches
            Set Selection
                To: rectangle
                Top: 0.767 Inches
                Left: 0.892 Inches
                Bottom: 0.868 Inches
                Right: 0.986 Inches
            Set Selection
                To: rectangle
                Top: 1.108 Inches
                Left: 0.885 Inches
                Bottom: 1.201 Inches
                Right: 0.986 Inches
    You can use this  for the rest of your process.
    To make things easier you should clear all actions before creating your new action or the text file will contain all of the active actions and you would have to hunt for the new action in the text file.
    Hope this helps.
    Paulo

  • I have a iphone5. I went to dubai there it was working properly. On my way back in the plane i turned the manual time zone selection in the date

    I have a iphone5. I went to dubai there it was working properly. On my way back in the plane i turned the manual time zone selection in the date & time setting and changed it to new delhi. when i landed back and tried to use the vodafone network whose sim is installe in te mobile NO SERVICE showed up. I tried to select the time zone & network selection from the carrier but manual selection is not accepted . I got a tiick mark at the service provider name but still no service status remains. After 2 days In the time zone automatic selection has started working and is showing new delhi but still automatic & manual network selection is not working. NO SERVICE is still shown . I m not able to make any calls. Internet through WIFI is working. Kindly help. 

    Hello, swatiy.82. 
    Thank you for visiting Apple Support Communities.
    I would recommend trying the steps in the article below when experiencing this issue.
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Cheers,
    Jason H.

  • What is the keyboard shortcut to select all the white in a layer

    What is the keyboard shortcut to select all the white in a layer, I'm on windows and use to do it all the time but forgot!

    Do you mean ctrl-clicking the Composite Channel icon in the Channels Panel?

  • Iphoto gives message "no images were selected" when hit print button.  Yet the the images are clearly selected in the print window.  I've printed hundreds of images without a problem before.  Iphoto 6.0.6, MAC 10.5.8

    Iphoto gives message "no images were selected" when hit print button.  Yet the the images are clearly selected in the print window.  I've printed hundreds of images without a problem before.  Iphoto 6.0.6, MAC 10.5.8, Suggestions?

    I have recently started having this problem in PSE8. The Adobe workaround
    did work, but I don't fancy having to re register each time I use it.
    What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
    It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
    If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
    Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
    Hope this helps

  • How to populate only the first record by default when the page opens?

    Dear Members,
    I am using OAF R12 and my requirement is as follows:-
    When the user opens the custom OAF R12 page, I just want to query the first record from the underlying VO.
    For example, If the table has 10 rows, I just want to query the first row as soon as the page opens.
    I have written the below code:-
    Process Request Method of the CO:-_
    am.invokeMethod("initHeaders");
    Code in AM_
    public void initHeaders()
    HeadersVOImpl hVO = getHeadersVO1();
    hVO.initQueryHeaders();
    Code in VO_
    public void initQueryHeaders()
    executeQuery();
    As it is very clear that with the above code all the records will be queried. I have to add something before the executeQuery() method in the VO to just query the first record.
    Can any one please help me by guiding me what I should add before the executeQuery() method in the VO?
    Many thanks in advance.
    Regards,
    R4S.

    Hello Gyan,
    Many thanks for your reply.
    The below line in your code is throwing incompatible type error:
    OARow row = vo.first();
    Can you please help me.
    Regards,
    R4S

  • How to delete the duplicated records, not just surpress the records?

    I am new to CR. Right now I am doing a project which needs CR get query from Oracle. I got the query from Oracle. There are records with duplicated fields. For example (the following only show part of fields):
    ID    body_code  
    1            10            
    2             10            
    3             15            
    4              15           
    5              15           
    6              16           
    I need to only select records (not surpress, because I will do some caluculate later) like following:
    ID         body_code        
    1             10         
    2              15
    3               16   
    I tried to creat selection fomula in fomula workshop, shown as follows:
    onlastrecord;
    <>next
    but CR said next can be evaluated. I think it must have something to do with the print-time. So what show I do to delete the duplicated records.Thank you very much.

    Ting,
    Try this:
    Insert a group on body_code.  Then create a running total called Distinct Count.  Field to summarize -> ID, Evaluate on change of group Group # 1 Body Code, and Never Reset.
    Then insert a chart in the report header:
    In the advanced layout, select body_code on change of and select Distinct Count running total in the Show values.
    I hope I understood what you're looking to accomplish.
    Z

  • How do I show and/or update image info in the Grid view?

    Somehow, all the info that was showing in my grid view, in Lightroom 5.6, disappeared. How do I view info for each grid image, on the grid and how do I update or change what info is viewable?

    Ctrl/Cmd-J

  • How can I show a pop up menu based on the selection in a previous pop up menu?

    For example, if "Company" is selected in a pop up menu in C6, then show another pop up menu in C7. if "Bob" is selected in a pop up menu C7, show another pop up menu that contains the talks "Bob" has in C8.
    I am trying to create a talk scheduling spreadsheet with different talk outlines for different speakers. I'm not sure if there are any functions or formulas that can accomplish this. Can anyone help?

    Pop-up menus contain fixed values in Numbers. You might be able to do this using Steppers or sliders. These produce a numerical result, which could be used to direct a second slider or stepper's output to a specific column or table.
    If you can provide a map of the structure of your list(s), there may be someone here able to take on the task of constructing the tools to do the job.
    Regards,
    Barry

Maybe you are looking for

  • Miserable experience with replacement LG Fathom, that replaced defective TP2

    Freezes It does freeze. Alarms don't work right I use the alarms & those didn't work right. I had set 1 for 9:30 pm & 1 for 10 pm,  The 10 pm one got up to 12 alarms--even though only 1 was set. Tech support wanted me to do a hard reboot but wasn't v

  • Right click Open With sometimes not working (Photoshop Elements 9, Windows Vista)

    We recently upgraded from Photoshop Elements 7 to Photoshop Elements 9. We are running Windows Vista. Last night, my wife was right clicking on JPEG images in her My Pictures subfolders and choosing "Open With" to open the files with Photoshop Elemen

  • Starting managed server in MSI mode

    Is it possible to access an application deployed on a managed server which is started in MSI mode(Admin server is stopped)??

  • MBAM 2.5 - SelfService Portal Not Working - Invalid Key ID

    Really odd issue I've run into here guys. Any help is greatly appreciated as this issue is holding my client back from releasing MBAM BitLocker management to his company.  We've setup a two-server MBAM solution. IIS sites are hosted on a server on th

  • Trigger BPM without Abap Proxy

    Hi there, my scenario: BPM (XI)-> JDBC -> IDOC is it possible to fire an event on the intergration server for starting the xi bpm ? abap proxy is not the solution because my webas is only configured as an integration server. thanks sebastian