How do I smooth out the graph?

Hi
I am using Component works version 1.1 with visual C++. I plot 3D data on CNiGraph3D control. My graph looks grainy. It looks like it's drawing a diamond at each plot point. So when the data between the adjacent points has a large delta, the color contrast between those 2 points is large. Is there a way to smooth/blend in the contrast?
Thank you

I would recommend installing the evaluation version on another PC, other than the one used for development, just to be safe. You can only have one version of the activex controls per machine. So you cannot develop with the 1.1 version and 7.1 version of the ActiveX controls at the same time. This is due to the nature of activex controls.
Measurement Studio does not install any device drives. Since you are testing the upgrade, I would recommend you try your application with the newest version of the GPIB driver. I do not anticipate any breaking changes between the 1.1 and 7.1 versions of the CWGPIB control, but it would be a good thing to verfiy anyway.
I hope this helps.
Bilal Durrani
NI

Similar Messages

How can I print out the graph I need only, without the controls and indicators?

I'm doing some programming in LABVIEW. I need to print out only the graph, without the buttons, controls, indicators. I tried to look for such a function in LABVIEW, but in vain. How can I achieve the result I expect in my programming?

Hi Fenny,
you should use the report generation functions to create a report containing your graph image and print it.
Take a look at the Sample Test Report.vi you find in the report examples of LV.
Just look at the part of the diagram where it is used Append Control Image to report.vi (in the center of the report functions chain); a graph reference is wired to the Ctrl reference input ( to create a reference of your graph right click on it and select create reference).
Let me know if you need more help,
Alberto

How can I smooth out the pixelation of my drawing?

I’m trying to create a line drawing effect similar to image 1 below .I have studied numerous you tube videos but my images end up looking to pixilated (see image 2). Image 1 has more of a that line drawn look of a pen tool. I would like to be able to run the effect as an action.

One thought... You could use the Photoshop CS5 Mixer Brush and paint over the lines.
Work at a higher resolution. A tablet would no doubt help; I have only a mouse.
-Noel

How do you smooth out lines in Photoshop CS5

I have some black and white line art drawings. The lines are not smooth and sharp, and instead have tiny jagged edges. I tried using the smudge tool, and that does smooth out the lines but it also makes the lines a little sloppy. That's probably how the Smudge Tool got its name. Is there a way to use this incredible software to create smooth lines? I've learned how to create paths, but I can't figure out how to use the paths to change the line art. Maybe this is what I'm looking for?

Noel Carboni wrote:
...to use a Path then add a Stroke style, so that it remains editable? .....
-Noel
If I understand your question correctly then the answer is yes.
You can create an arbitrary path whose shape, open or closed, can remain editable throughout your session and it can be duplicated if needed. That path can then be stroked with a pixel painting or editing tool. Lets say you create a new layer and stroke a path with a colored brush. You can then add a style to that layer, move that same path and add a different stroke on a second layer and then duplicate the path, move it and edit its shape and then do yet another stroke and style on a third layer. This is what I've done in the image below showing the stroke & styled paths as well as the vector path in the bottom path.
Once a path has been stroked to a layer and has had a layer style applied it is only editable as pixels, but the shape remains as a path which can re restroked or moved or reshaped so flexibility is high.
Paulo

How do you smooth out a coat?

Having a hell of a time figuring out how to smooth out the arm of this coat. thanks

One technique I like, which fits in with the frequency separation thing JJ talks about is this:
1. Switch to 16 bits/channel and a linear color profile.
2. Mask so just the arm is showing. The Quick Select Tool works well for this.
3. Refine Edge to get it into a new layer
4. Do a Filter - Other - High Pass, choose a radius that shows the wrinkles, but not too large.
5. Image - Adjust - Invert.
6. Change the blending mode to Overlay and watch the tight wrinkles magically get smoothed out.
To take it a bit further...
7. Flatten the above.
8. Mask the arm again, Refine Edge to make it a new layer.
9. Filter - Noise - Median until it is very smooth.
10. Hide the unnaturally smooth looking parts with a dark color in the mask.
Something like this isn't too difficult to achieve... Took me longer to write about it.
-Noel

How can i print out the waveform chart?

hello everybody,
how can i print out the "waveform chart". can i do it just push the button. ( example; stop button is stop the program etc..)
i checked the NI examples but i can't understand. i'm new to the Labview.
pls help me.
i added the my program
look forward your reply
regards from turkey...
Message Edited by hknmkt on 05-29-2008 04:15 AM
Attachments:
29.05.2008_11.vi ‏37 KB

hi jim,
i tried the program but it's not running. When i run the program, it's print out without run the program
i added the printed file.
look forward your reply
hakan
Attachments:
error8.JPG ‏8 KB

How can I find out the dpi of an image in Acrobat.

How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
That opens a panel on the right.
To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

How can I find out the overall time and not only the time of a single clip?

I have set up two cameras in one room. Both cameras record the same thing from different perspectives at the same time. I have found an interesting scene for video 1 (recorded by camera 1). Now I would like to find the time at which the interesting scene takes place in video 2.
However, I have not seen any way to get displayed, at what time the scene starts in relation to the total length of the video (e.g: scene starts after 5 minutes from total 10 minutes).
The indicated time refers only to a part of the clip and not to the overall project, even if a special clip is not selected. Does anyone know, how I can find out the time?

Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can I close out the page I am working on in safari when error boxes keep popping up?

How can I close out the page I am working on in safari when error boxes keep popping up?

What do the error messages say ?

How can I find out the mail server from email address?

Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOU

You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean

I entered the incorrect password for my home wifi network and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

Settings > wi-fi then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
Now at the top tap on "forget this network".
After that, the iPhone will think your home network is a new network and will ask you for the password to connect.

How do I print out the attributes of objects from a Vector? Help !

Dear Java People,
I have created a video store with a video class.I created a vector to hold the videos and put 3 objects in the vector.
How do I print out the attributes of each object in the vector ?
Below is the driver and Video class
Thank you in advance
Norman
import java.util.*;
public class TryVideo
public static void main(String[] args)
Vector videoVector = new Vector();
Video storeVideo1 = new Video(1,"Soap Opera", 20);
Video storeVideo2 = new Video(2,"Action Packed Movie",25);
Video storeVideo3 = new Video(3,"Good Drama", 10);
videoVector.add(storeVideo1);
videoVector.add(storeVideo2);
videoVector.add(storeVideo3);
Iterator i = videoVector.interator();
while(i.hasNext())
System.out.println(getVideoName() + getVideoID() + getVideoQuantity());
import java.util.*;
public class Video
public final static int RENT_PRICE = 3;
public final static int PURCHASE_PRICE = 20;
private int videoID;
private String videoName;
private int videoQuantity;
public Video(int videoID, String videoName, int videoQuantity)
this.videoID = videoID;
this.videoName = videoName;
this.videoQuantity = videoQuantity;
public int getVideoID()
return videoID;
public String getVideoName()
return videoName;
public int getVideoQuantity()
return videoQuantity;
}

Dear Bri81,
Thank you for your reply.
I tried the coding as you suggested
while(i.hasNext())
System.out.println( i.next() );
but the error message reads:
"CD.java": Error #: 354 : incompatible types; found: void, required: java.lang.String at line 35
Your help is appreciated
Norman
import java.util.*;
public class TryCD
   public static void main(String[] args)
     Vector cdVector = new Vector();
     CD cd_1 = new CD("Heavy Rapper", "Joe", true);
     CD cd_2 = new CD("Country Music", "Sam", true);
     CD cd_3 = new CD("Punk Music", "Mary", true);
     cdVector.add(cd_1);
     cdVector.add(cd_2);
     cdVector.add(cd_3);
     Iterator i = cdVector.iterator();
     while(i.hasNext())
       System.out.println( i.next() );
public class CD
   private String item;
   private boolean borrowed = false;
   private String borrower = "";
   private int totalNumberOfItems;
   private int totalNumberOfItemsBorrowed;
   public CD(String item,String borrower, boolean borrowed)
     this.item = item;
     this.borrower = borrower;
     this.borrowed = borrowed;
   public String getItem()
     return item;
   public String getBorrower()
     return borrower;
   public boolean getBorrowed()
     return borrowed;
   public String toString()
      return System.out.println( getItem() + getBorrower());

How do I print out the value returned by a method in main??

I'm a total newbie at java, I want to know how I can print out the value returned by this function in the "Main" part of my class:
public int getTotalPrice(int price)
int totalprice=price+(price*0.08);
return totalprice;
I just want to know how to print out the value for total price under "public static void main(String[] args)". thanks in advance,
Brad

Few ways you could do it, one way would be to create an instance of the class and call the method:
public class Test
    public double getTotalPrice(int price)
        double totalprice = price + (price * 0.08);
        return totalprice;
    public static void main(String[] args)
        Test t = new Test();
        System.out.println(t.getTotalPrice(52));
}Or another would be to make getTotalPrice() static and you could call it directly from main.

HT4356 I don't have wireless printer. How can I print out the document?

I don't have a wireless printer. How can I print out the document from regular printer?

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How do I smooth out the graph?

Similar Messages

Maybe you are looking for