How do I solve DVCPROHD deck problems and finaly conquer this HD Nighmare

In the continuing saga of Peter and the Panasonic AJ-HD1200A Peter has managed to reset the deck to factory settings. The 720p light is out and now I can't capture anything even at the wrong frame rate and frame size as before. I am completely baffled by the menu system of the deck (and the manual) so would greatly appreciate a guide to help me.
I am sure that Shane Ross's suggestion to capture via Component rather than SDI through my Kona LS will work (see my other post on Varicam Codecs, i'll paste it) but I seem to have rooted the Deck.
so yeah. Some help would be great.
Sincerely
Peter
my previous post
Hi there. Thanks to those people who answered my previous question about the Vari Cam codec. I hate to say I am still a little confused.
I should specifiy now that I am capturing footage from DVCPro tapes recorded on a Panonic Vari Cam (720p). The deck I am using is a panasonic HD1200A and I Have a AJA kona LS capture Card.
I want to edit for final output for PAL, so 720x576 (it will be 4:3 letterboxed 16:9) and a frame rate of 25.
So my question is which of Final Cut Pros many capture presets do I use. Do I need to downlaod a third party Codec.
I tried using DVCPro HD 720p60 codec but this doesn't deliver the Data rate I was told to expect (14 mb/sec rather than 5.6mb/s). However it does seem to work. Will I simply have to scale the final movie to fit the proportions of PAL 4:3? As this is a green screen shoot how will my Key be effected by the Codec, GOP, P an B frames, or will final export with a quicktime conversion solve this. I appreciate your help in clearling up these mysterys of HD
I am on a dual processor G5 with 3 gig of Ram.
Thanks Sincerely
Peter Stenhouse

Ok...you are capturing via the AJA LS. Are you capturing using the Easy Setups...specifically the AJA ones? Are you connected via Component and have RS-422 control? What drives are you capturing to?
Sorry, I don't own an AJA, so I can't offer too much insight into that area.
shane

Similar Messages

  • AppStore displays permanently an update avaible and there is none really, how can I solve these little problem?

    AppStore displays permanently an update avaible and there is none really, how can I solve these little problem?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Sync with iTunes
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    I myself would live with it before doing the following 
    - Restore to factory settings/new iOS device.

  • How do I solve the memory problem ( 5 beeps ) upon startup?

    hp compaq d530SFF,  how do I solve the memory problem (5 beeps ) upon start up?

    Hi:
    You already know the answer to that! 
    http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/when-I-try-to-boot-up-lighs-flash-red-and...
    Paul

  • HT4009 in app purchase from OMGPOP "Draw Something" of 400 coins never received - has anyone else had this problem and do you have a suggestion for me  Tried "report a problem" and directed to this site."

    in app purchase from OMGPOP "Draw Something" of 400 coins never received - has anyone else had this problem and do you have a suggestion for me  Tried "report a problem" and directed to this site."

    Hi AP_In_Surbiton,
    I am really sorry that you have had so much trouble getting your Caller ID up and going.  I'll be happy to help you out with this and get it working for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I resaved a draft email in yahoo mail on my ipod touch and it just disappeared - how do I get it back? And why did this happen?

    I resaved a draft email in yahoo mail on my ipod touch and it just disappeared - how do I get it back? And why did this happen?

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?problem.

    Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
    Thanks!
    Angela

    You may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
    I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
    Best of luck.

  • How do i solve the following problem. By starting up the message appears: could not found CoreFoundation.dll. Windows error 7

    By starting up the following message appaers: could not found CoreFoundation.dll.
    Windows Error 7
    How can I solve this problem?

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • How can I solve LOV , TAB problem in Portal 3.0.6.6.5

    Hi All,
    I have certain doubts which i have summed up below. i hope you can explain/clarify me these doubts.
    1) I have two lov in form one related to another.I clicked the first LOV (either combobox or popup) and inserted value in that field.When I am clicking second LOV (either combobox or
    popup)it refreshes and inserts the result fine.IF I HAVE FIRST LOV WITH A DEFAULT VALUE AND IF I CLICK THE SECOND VALUE WITHOUT CHANGING THE FIRST LOV I AM GETTING ERROR.COULD YOU HELP ME IN THIS REGARD.
    2)For updating a record in form I have to click the query and then update.Otherwise it is not updated.
    3)whether it is possible to open a link which i specified in my report to open in the same portlet or i want in the new window not in the same window.is it Possible?
    4)How to attach popup Date Picker script to my form field.
    5)I have 3 levels of tab in my portel.In the third level I got report and form if i am
    clicking the last tab i can't see the report i have to navigate the next tab in the last
    level and come again to this tab to see the report.I don't know how to solve it
    6)I got this type of link Report---> FORM for updating after form updation is over I have given back button to report.i want to refresh the report when I am in to the report.i have given refresh button now.But I have to do it automatically so I have written in body onLoad but the refresh is in loop so i can't see my report.So how i can solve this.
    Thanks in Advance,
    Sundar

    I suspect this is failing on an UPDATE to the tt_03_reppeers table on Oracle. I would guess the TT repagent has to temporarily use serializable isolation when updating this table. Do you have any other datastores with AWT cachegroups propagating into the same Oracle database? Or can you identify if some other process is preventing the repagent from using serializable isolation? If you google ORA-08177 there seem to be ways out there to narrow down what's causing the contention.

  • Seeking help...when I open Safari it keeps going to a webpage I opened earlier and I cannot see how to get to the home page and out of this webpage. Suggestions?

    Seeking help with Iphone 5S I just got. When I open Safari it keeps opening to a webpage I opened up days ago and I cannot seek how to return to home page or move out of this webpage. Any suggestions?

    A new Apple product comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.
    Best.

  • How do I solve General Error problem when rendering and/or playing part of a sequence?

    Hi!
    All of a suddenly when I was editing, the General Error message appears. Now there's part of a sequence I cannot render nor play.
    I've restarted the application and the computer but without result. I've also cleared my render folder.
    Is there a solution to this problem?
    Best,
    Christopher

    I appreciate your respons, though it did not work for me.
    I've narrowed to problem down to a 5 sec clip of sound I have on the timeline, even after reconnecting that clip to a copy of the file it doesn't work. This has me perplexed.
    Thanks again!
    Christopher

  • How can I solve these connection problems in Mail 3.2?

    I have an iBook G4 that is running Leopard (10.5.2). I use it at home via an Airport connection and at work via a direct ethernet connection or router. I have the only Mac in my office. Within Mail I have set up my .Mac account as IMAP, and also import mail from my work POP account into Mail. Until recently this has been an elegant solution for my email needs (except for the fact that multiple copies of the same message from the POP account often turn up in Mail). The iBook still works fine at home, but now it doesn't at work. Our work internet connection is DSL and pretty slow. When using Connection Doctor, I can see what I have been experiencing at work. Usually the POP work email account is connected, but often the IMAP .Mac email account is not. The same goes for the out-going .Mac mail server. I have never had to set the preferences for these two email accounts differently in Mail to account for when I am at home and when I am at work. Could the reason be: the slow internet connection? changed settings for the internet connection by the cable company at work? something else? Any ideas would be appreciated!

    You may be experiencing problems that can be resolved by following advice on the following link.
    http://support.apple.com/kb/TS1307?viewlocale=en_US
    Good luck.

  • How can I solve an "authoring" problem when burning to dvd disc?

    I now have 4 Burning applications which worked great at first.  Now however, none of them do.  The latest "Burn", now says it has an "authoring" problem.  How can I resolve this?

    hello, try the cure by animcam...
    http://forums.macrumors.com/showthread.php?t=493723
    Seems about the same problem here...
    http://sourceforge.net/projects/burn-osx/forums/forum/578948/topic/3264529

  • HT4623 How can I solve the Bluetooth problem I have with Code 28

    I am having problems with Bluetooth Peripheral Device drivers not installing Code 28, any advise.

    You might want to ask in the MBP area as well. And there are a number of issues with networking, support for IPv6 (I would disable rather than use Automatic setting) and whether you use Airport or not.
    Take a look on
    http://www.macfixit.com
    http://www.macintouch.com
    where they have some articles - and search Apple Support if this continues. In the meantime, might want to reboot your router and check your settings.

  • How do I solve the crashing problem with the '11 version of iMovie?

    imovie seems to have trouble with optimizing or building an interface for my older videos. If is delete them it get futher into the process and crashes again. Is there a patch for this or a process I need to follow?

    Well if I follow him, he creates an Exposure Adjustment Layer.
    Then he cranks up the Exposure, lightening the entire body, which he does not want. It's only the head.
    So leaving the Exposure set to where he put it, he selects that adjustment layer, clicks on that white thumbnail mask first, then paints
    using the brush and black. What this does is "hides" or Masks the exposure effect where he paints, it doesn't paint the picture black.
    He finds having to "mask" the entire body a lot of work. So he changes the mask to black by inverting it, and changes the swatch to white.
    Then being sure the black mask thumbnail is selected, he paints the head with the white color, punching a hole in the mask so the exposure setting comes through on the face.
    Does that make sense?

  • How do I solve a memory problem in regard to downloading Firefox?

    Firefox almost completly downloaded but stopped. It said I have 0 space left, yet the computer still has about 35MG left. The computer met the requirements for the download I believe. I tried to free up space by archiving stuff and deleting, but nothing adds to the space Firefox was allotted. Is there someway I can transfer memory to Firefox from somewhere else on the computer? If not, what can I do?

    It seems to me that you have plenty of space on your hard drive, not very much RAM (so your computer might do some things quite slowly), and that you have downloaded Firefox, but not installed it.
    I suggest that you try picking up Firefox from your desktop and moving it to your Applications folder. You should see a little graph that indicates it is installing itself, then its icon should appear in your Applications folder. Then right click (command-click) on the desktop and eject it.
    If that doesn't work, put your current Firefox in the trash, download the program again, and when it arrives on your desktop, don't open it, but drag it to your Applications folder as described above.
    Once you have installed Firefox in your Applications folder, you can click on it to open it from there.

Maybe you are looking for