How do i start a motion tween by clicking a button and stop it at the end of the tween.

Hi guys,
I am creating a website for a project and i am trying to activate a box bropping down from another box when i click on the enter here button i have created. I have set the motion tween and its working when i preview i just unsure of the correct actionscript to start this tween when i have clicked the entere here button or how to stop it at the end of the tween.
I am scared i may have made the layers in the wrong place, they are all currently in scene 1. does my second box that is dropping down need to be set inside the layers of the first box?
Bit of a newbie at this.
Thanks in advance!

Create the dropping box movieclip as an animation by itself with a stop() coomand in the first frame and a stop() command in the last frame. The click of the button should tell the movieclip to play(); at which point the animation should play and stop at the end.
Another option would be to use an actionscript Tween to make the box drop. Going that route the animation is what you code it to be and there is no need to have to stop it as it will end where you tell the Tween to end at.

Similar Messages

How can I Read lines of data from a file starting at the end of the file??

Can anyone help me with how to read lines of data starting from the end of a file instead of the beginning?? I do not want to load the entire file into memory as the files are very rather large. Instead I want to start at the end of the file and read lines backward , until I find the particular data item i am searching for, then stop.
Can this be done in Java ? I know it can be done in Perl.
Thanks.

Thanks for your suggestion about the RandomAccessFile, I did actually thought about that approach , but wasn't sure it would work.
I do not want to read the file in a sequential forward manner because the files contain large number of lines of data that have already been processed and therefore there is no need to reprocess these lines of data.
The Unprocessed lines are always at the the end of the file and these are the data lines I am interesting in getting at without having to read the entire file. Therefore, i figure that if I can read the data from the end of the file then this would be much more efficient.

I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?

I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?

adam@honestmusky wrote:
Yes I am using encore. I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
How about some DETAILS?
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also describe the EXACT steps you take to go from Premiere Pro to Encore

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

How do i start my ipod touch if it is locked and i forgot the passcode?

how do i start my ipod touch if it is locked and i forgot the passcode?

See this thread posted 40 minutes before yours: https://discussions.apple.com/thread/3154008?tstart=0

I recently upgraded to new vers. of firefox, since then, when I do a "reply" in AOL, the curser starts at the end of the message as opposed to the beginning (so i have to scroll all the way to the top of the original message)....how can i correct this??

on a reply, the curser, previously would start at the begining of the reply, now it's at the end of the original text.

You need to check with AOL support. Firefox has no email settings, any email features will be part of the email service that you are using.

Hello Simple problem - don,t know how to solve it. With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !

Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !!

When i tried updating my iphone 4 to the latest IOS version 7.1.1 and at the end of the update it has the icon connect to itunes. When i try connecting to itunes it still doesnt program. Why is this? How can i fix it?

When i tried updating my iphone 4 to the latest IOS version 7.1.1 it was updating until the end of the update where it had an icon which said connect to itunes. When i try connecting to itunes on my laptop it still doesnt program, by the way my itunes has the latest updae. Why is this? How can i fix it?

Hey there Raymondd2014,
It sounds like you had been updating the phone and now it is in recovery mode. Take a look at this info first:
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
If you are unable to get out of Recovery Mode, use the following article to restore your device with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If you don't see your device in iTunes follow these steps for Windows.
Thank you for using Apple Support Communities.
Take care,
Sterling

How do I read in a 1 Hz pwr level file and send it out at 1Hz to the signal generator?

I would like to be able to read in a 1 Hz file and use the format into string and send it out at 1 Hz to a signal generator to vary the levels to match a timestamp. I was trying to use the format into string but I can't figure out how I could read in this file.
00:00.0
-113.586
00:01.0
-113.598
00:02.0
-113.61
00:03.0
-113.622

If the file is a .csv file as you said in your other post, then you should just be able to use Read From Spreadsheet File, making sure to set the delimiter to comma rather than tab. If it's a small file, you can just read in the whole thing, then use a loop with a Wait For Millisecond Multiple node (the metronome) to send the data once every second.
If the file is very large, and you don't want to read it all at once, you can tell the Read From Spreadsheet File node to read only one line at a time. Put the read node and the data sending node in the same While loop, and use a shift register to carry the Mark After Read value from one iteration into the Offset or Mark At Start terminal in the next iteration. That way, you start reading each line at the end of the previous one. Use some form of flow control (such as a Stacked Sequence Structure) to make sure things happen in the right order - read data, wait for the right time, send data.

How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.

What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????

Hi I asked a computer engineer to install RAW plug in 8.7.1. on PSE 12 for me, and he couldnt do it either.   I have bought PSE 13 and followed the advise I was given - go to Edit - expert - Help - plugins - RAW - update- and IT WORKS !!!    DW
Original message----
From : [email protected]
Date : 25/01/2015 - 11:53 (GMTST)
To : [email protected]
Subject : How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    created by susanl96972449 in Photoshop Elements - View the full discussion
Hello, I have been experiencing similar problems and followed the suggestion and yes, the raw icon comes up as illustrated but there is nothing there to indicate any further action can be taken. So I am presuming that means it is installed and no further action required?
Here's my problem: I have had no problems getting my pics into my organiser in Elements 12 from either my Nikon D7100 or my Fujifilm X100S - until last week. Suddenly when they are imported all I see is the timer icons but they don't open to let me view them. If I click on one it will open and I can then edit it but it will not save an image onto the grid for me to view so it's really frustrating not being able to view all my photos in order to decide what to edit and compare them.
Here's what action I've taken so far - restarted the computer (endlessly), checked the updates and installed them, checked I have the latest raw plug in (I do) and gone into edit/update thumbnail (doesn't do a thing) - and torn out a fair amount of my hair. So anyone out there experienced this and can give me some advice? Please?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7129439#7129439 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7129439#7129439
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

When applying a transition between particular clips it only applies to the end of the previous clip and will neither 'Center on Edit' nor 'Start on Edit'. I'm kind new to FCE 4 so please excuse my inexperience.

When applying a transition between particular clips it only applies to the end of the previous clip and will neither 'Center on Edit' nor 'Start on Edit'. I'm kind new to FCE 4 so please excuse my inexperience.

This indicates that you only have handles available on one side of the edit point. If the transition ends on the edit, that means that the next shop begins on the first frame of the media file and there is no room for it to extend and create the necessary overlap.
Click <a class="jive-link-external" href="http://www.fcpbook.com/Effects1.html">here</a> to find out how transitions work.

Using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part I get no indication on ipod of download

When using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part. I get no indication on the ipod of the book downloading. Is this a operating error or posable failure of the I pod.?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Using The IMovie/IDVD when burning the DVD the minu burned at the end of the DVD how do I correct that?

I am a new IMac user. I am learning the IMovie program and when I burned my 1st Practice DVD and the menu showed up at the end of the DVD. How do I get the Menu to start up first to where you have to manually start the DVD?

Because you supplied the exact message could do a Google search on the message including the quotes you enclosed the message in.
firefox prevented this page from automatically reloading ... How can I fix this? | Firefox Support Forum | Firefox Help
* '''http://support.mozilla.com/en-US/questions/750222'''
To eliminate the message uncheck the box at
:Tools > Options > Advanced > General : Accessibility : ...
: [_] "Warn me when web sites try to redirect or reload the page
If you do want to prevent autorefresh, keep the setting check-marked and click on "Allow" on the message banner, or use "Reload" when you want to refresh.

How can we enable tick icon when user click any button

how can we enable tick icon when user click any button in captivate 6@

hi first of all thanks for imitate action.
actually i want to make a menu (TOC) with tick icons, on starting all ticks are disabled but when i click on any button from my menu i want to enable tick for that particular button so that user can know easily the visited button.

HELLO! How do I fix this? When I click on imovie "add titles" it closes. I uninstalled the application, to date I have reinstalled, the problem persists, the problem

HELLO! How do I fix this? When I click on imovie "add titles" it closes.
I uninstalled the application, to date I have reinstalled, the problem persists, the problem

Thank you for having responded to me!
Unfortunately I did already the case "delete preferences" but nothing!
Also, when crashes do not give me any reports!
Started in safe mode, with another administrator, the problem becomes even: your video card is not compatible with Quartz Extreme!
My card is a g-force framework 4000 FOR MAC!!
STRANGE TRUE!
If you know something more to this riquardo please answer!
Thanks Comunity!!

How do i start a motion tween by clicking a button and stop it at the end of the tween.

Similar Messages

Maybe you are looking for