How do I start my VI when I turn on my NI-cDAQ-9172?

I want to have the same VI start every time I turn on the NI-cDAQ-9172.  Is this possible?

You would have to place a program in the startup that looks for DaqMX devices. When it see the one you are looking for it could start your program using the system exec. You would just have to call the exe file for the program that you want to start.
Tim
Johnson Controls
Holland Michigan

Similar Messages

  • This is embrassing, how do I start a backup when my Iphone is plugged in.

    This is embrassing, how do I start a backup when my Iphone is plugged in? I need to retrieve deleted notes.

    http://support.apple.com/kb/HT1766

  • HT1436 I have two hard drives on my G5(2004). How do I get to choose which hard drive is the start up disk when I turn on the computer? Is it the shift key I hold down?

    I have two hard drives on my G5(2004). How do I get to choose which hard drive is the start up disk when I turn on the computer? Is it the shift key I hold down?

    depending on which model of G5 and  OS installed will depend on whether a key command will work
    alt   at start up may  work, if it does not, use the start up disc setting in;  
    apple menu > system preferences > system  > start up disc
    of course, the second drive must have a compatible OS installed for it to be able to boot.

  • How do I make a program start up right when I turn my computer on?

    Hello all!
    Just wondering how I can make the program "iPulse" start right up when I turn my awesome computer on everyday!
    Thank you

    Add it to the list of login items for your account in the Accounts pane of System Preferences, or control-click/click and hold its Dock icon and set it to open at login.
    (34979)

  • When i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) .  How can I fix this?, when i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) .  How can I fix this?

    when i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) .  How can I fix this?, when i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) .  How can I fix this?

    It is possible that you have the rotation lock on? Check this:

  • When I turn on my computer, it automatically logs me in. How do I make it where when you turn the laptop on, you have to put in a password?

    Hello. I am a new Mac user. A couple days ago, I purchased a brand-new MacBook Pro, and have become very fond of it. So fond of it, I have become quite obsessed and protective of it as if it is my own child. Lol. Anyways, the only thing I am trying to figure out is how do I make a password come up as soon as I turn on my computer? I already have it set where whenever it goes asleep it asks for the password, but how when I turn the Mac on?

    Open the "System Preferences" app and click on "Accounts".
    Click "Login Options" at the bottom of the list of users.
    If the options in the dialog are greyed out, click the padlock and enter your password to unlock them.
    At the top of the dialog you should see an "Automatic login" option: change this to "off".
    You should now get the login window when you start the computer.

  • When I turn my itouch I get a reading, "iPod is disabled" connect to iTunes.  How do I fix this?, When I turn my itouch I get a reading, "iPod is disabled" connect to iTunes.  How do I fix this?

    When I turn my iTouch on, I get a reading, "iPod is disabled"... connect to iTunes.  How do I fix this?  I also need to change my passcode.

    What happens when you connect the iPod to your comoputer and try to restore via iTunes?
    You may have to plae the iPod in recovery mode to allow the restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • My mac book pro won't start only the fan starts running alone when I turn it on but no display is shown on the screnn

    My mac book pro wont start only the fan starts running when i turn it on but no display is shown on the screen

    Have you tried this yet?
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • My macbook air does not start up successfully. when i turn on the power, it just turn blue after the apple logo, how to reboot or repair,.. pls help me what is the buttons command... thanks in advance.

    pls help me how to reboot my macbook air,.. because starting it up was not successful. the screen just turns blue after the apple logo appeared.

    i know loads of people who have had this problem including me.  The Java script update apparently had some virus that has overloaded the start up disk.   I took to apple who said i have to have the machine rebuilt but first i have to go to a data recovery company to get back everything that was on it.  Data recovery company have quoted me nearly £1000. 

  • How to implement start & stop triggers when # scans unknown on ni5112?

    I want to initiate a data capture trigger on the leading edge of a pulse & then stop the trigger on the next leading edge of the same pulse, using NI 5112 Scope card & LabVIEW v5.1. How to accomplish?? Any help appreciated!

    You can implement a start and stop trigger but not with an arbitrary number of points.
    The 5112 has two triggers the Acquisition Arm and the Record Arm.
    The Acquisition Arm trigger enables the Scope to start taking pretrigger data.
    The Record arm trigger is often call the Stop trigger or Reference Trigger. Based upon the Reference Position the board will acquire X pretrigger samples and Y post trigger samples. The Reference trigger defines the transition from pre to post trigger. If you set all of your points to be pretrigger (i.e. 100% reference position) then the Reference trigger will stop acquistion on the trigger. One thing to note: the scope will not be ready to accept the record trigger until it has acquired all the pretrigger points. The scope
    will only return one record size of data. Therefore the first samples will be lost.
    For example I would like to start a acquisition with a trigger on PFI 1 and use edge triggering on channel 0 to stop the acquisition. I need at least 1000 points.
    You will need to make the following changes in the code. Start from the niScope EX Configured Acquisition.vi and set up the triggering for Edge Trigger. Set your minimum record size to 1000 samples. On the diagram go to the Edge Trigger Case of the Triggering Selection Case Structure add a property node before the configure edge trigger similiar to the attached screen shot. Change the property to Acquisition Arm Source found in the synchronization menu. Change the property to write and create a string constant. The available sources for the Acq Arm are PFI 1,2 and RTSI 0-6. The syntax needs to match the following: "VAL_PFI_1". You will miss the edge trigger if you have not already acquired 1000 samples from the acquistion trigg
    er and you will only get back 1000 samples.
    Good luck and let me know if you have any questions.
    Mike Taylor
    Attachments:
    acqarm.jpg ‏66 KB

  • How do I start Macintosh again when I worked with Microsoft (I am not using Parallel Desktops)?

    I had just installed Windows Vista on my MacBook and worked with it for a while but when I wanted to switch back to Macintosh it wouldn't work. Does anyone know a solution?

    Now that you are back in OSX you might ask yourself which Operating System (OS X or Windows Vista) you will use more often.
    Once decided and while in OS X go to System Preferences - Startup Volume and set the default accordingly.
    Stefan

  • How can I start Private Browsing when I do not have a "Firefox button" to click?

    "Open a new, blank Private Window
    At the top of the Firefox window, click the Firefox button and select New Private Window. A new Private Window will open.
    That is what it says! But where is this Firefox button at the top of my Firefox (v 20.0.1) window? What I have at the top of the window is:
    (1) A blue-background bar with the Firefox icon and the title of the current page
    (2) 2 grey-background bars with menus (e.g. File, Edit, ...) and buttons
    (3) 1 grey-background bar with the Bookmark Toolbar
    (4) The Tab bar
    But no Firefox button, and none available in the customise dialog. Have I suppressed it somehow?

    hello, the private browsing window is accessible through the file menu that you've referenced too - or you can use the keyboard shortcut ctrl+shift+p.
    if you want to get the default userinterface with the firefox button though, go to view > toolbars & disable the menu bar...

  • Trouble with 10.6.8 Update - blue scream, does not start the OS when it turns on. Should I stay with the old 10.6.7?

    The Disk Utility could not repair the disk neither the repairing installation of the OS X allowed me to start the OS, the blue frozen scream was still appearing. The HD erasing with the Disk Utility was the only choice, than installing the 10.6.7 OS.

    I'm not entirely certain of what you've tried here, so some of this may be what you've already tried.
    Get an external backup or two, made via the bootable DVD.  Recoveries and repairs sometimes fail, and data loss can result.
    if Disk Utility is not repairing the disk structures, then you can try an add-on repair tool (which wouldn't be my choice, but some folks try that), or you can create an external backup and reinstall from distribution.  Attempting installation on a corrupt (or potentially failing) disk won't usually have desirable results.
    After creating the external backup (or two), you can either replace the disk and reinstall, or can attempt to wipe and reinstall with the existing disk using the bootable DVD that came with your system (or a new Snow Leopard DVD from Apple) and particularly the Disk Utility tool that's available via the DVD Utilities menu, and migrate in your old data from the external backup.    I'd then download and apply the 10.6.8 Combo Update from Apple; and not the delta update from 10.6.7 (if that's what your Mac DVD has).
    The data migration is part of the installation, and will attempt to bring in your existing files and your old environment, passwords and the rest of the settings from the external disk image.  (Assuming it's not corrupted.)
    If you have reinstalled and have redownloaded and reloaded the combo update, then you likely have some sort of a hardware problem with your MacBook Pro; check with the local Apple Store for repairs, or whoever else you might be using for that.   Or replacement, of course.
    I'm going to assume that you're using the OS X 10.6 client software that arrived with that MacBook Pro and have not installed and are not running the server version of OS X Server 10.6 (this forum);  the initial recovery sequence for this case is basically the same for either, though getting the various services back online after a disk corruption can be more involved.  You will need to use the 10.6.8 Server combo update here, though.

  • How do you reinstate "forget network" when you turn it off

    I turned off "forget network " by error how do i reactinate it so I can get my WIFI back. I am also unable to get my i phone to hook to my network it will not accept my password for my wifi

    Check your wifi password

  • How come my Apps pop up when I turn my MAC on?

    Every morning when I power on toMac, my apps pop up -Message, mail, reminders, microsoft bridge, photo - I spend a few seconds "x" them out - its irritating

    Actually it was new to Lion  but I am just being pedantic.
    10:04 PM      Wednesday; October 24, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for