How do I use logic as a mulit timbre sound module???

Whats up people,
Im trying to trigger all the sounds in logic via a hardware controller (mpc) separating everything on separate channels. I got it to read on just one channel at a time, but multi?? Forget about it.... I read other posts in regards to this same question and have run thru the suggestion switched midi setting to auto demix etc...
Doesn't respond if i go to another channel on my hardware and select the new instrument to the same channel in logic it still only allows playback from one channel at a time?? Huh is my theory even possible folks!?? I would think it is.
Im trying to comprehend the instructions in the manual for the environment setup, to see if i need to make any changes their. I thrown in a channel splitter, a seq input, a transformer but i have no idea if im doing it right?? I must be slow cos to me that enviroment chapter reads like riddles! (LAYMAN TERMS SOMEONE PLEASE!!)
If anyone can assist in this id appreciate it. Any and all suggestions are welcome.
Good lookin out
peace
D.

Greetings people,
The latest.............okay where do i start. Well i actually followed everybody suggestion on this thread and actually as a result now understand the enviroment a little better. But i have still been unable to get my multi playback channels. I managed to get access to all 16 channels etc.
Right now i have my physical input going thru the monitor to the channel splitter, each channel is cabled to my audio instrument(which im assuming is the multi inst i created as to represent the mpc) channels are set to all and then i have the out of my audio instrument going to the seq input. I hear my sounds and have actually triggered the internal sounds from the mpc pads no problem (did that b4 i posted)
but now say i select midi channel 1 on my mpc, which in turn is instrument 1, double click it to get the audio window select ultrabeat, go back to the mpc and program some drums using ultrabeats sounds. Now remember all im doing is recording midi signals into my mpc which is triggering logics sounds right. okay so now, im saying i want to go to the next channel/audio instrument/ and now use sculpture and put a nice fat bass on it. so i select the patch i want hit play on my mpc hoping that it plays back the drums, but NO! now i have selected a new track it pulls over the programming i did for ultrabeat into the sculpture patch.....follow me??
I tested logic to just record one at a time in the arrange, and it does but it records real erratic. btw my mpc is strung up thru my midisport usb which i did select in the enviroment window..check!
I tried Mac's method of dragging the audio instrument into the arrange and selecting the track with a corresponding sub channel etc but got allot of midi feedback!!??? I know that going to settings - record-auto demix etc is supposed to do the trick, well it aint for me?? Please what am i doing wrong??
Ultimately i want to be able to program my mpc using logics sounds via the midi channels simultaneously, and then dump it all down into logic once i am happy with the outcome. Am i asking too much for logic to be a sound source and recorder at the same time??
I dont mean to sound naive or ignorant but i have just started using software for the first time. i use to go the hardware route using digital recorders allday but it was a simpler routing method since my sound sources were seperate(keyboards, sound modules etc). obviously now im tryint to intergrate my old style with the new, but im getting very fustrated and creativley lathalgic from this setback. Many have suggested tossing the mpc and using logic for drums, but sorry i just cant do it i love that boom bap to much.
Anway sorry for the rambling its late and ive just spent the last 5 hours beating my head upside the g5. If anyone out their hasd a similar setup to me whether successful or not, get at me lets trade off techniques and ideas.
Thanks again for taking the time to read the thread and offering your help, please keep it coming.
peace
D.

Similar Messages

How do you use Logical Expressions in the RTF?

How do you use logical expressions such as "and", "or" when you want to do conditional printing of XML data in the RTF?
For example:
if (conditionA and conditionB) then...
Regards,
Smita

Thank you Sir! - I had something else wrong in the expression, but the error message I was getting was a bit misleading and sent me down the wrong path.
Thanks again, and best regards:)

HOW I CAN USE LOGIC TO BURN AUDIO CD?

I BEEN USING LOGIC FOR LONG TIME,I'M TRYING TO BURN THE MIX (AIFF) TO A REGULAR CD AUDIO BUT I CANT
SO MANY PROBLEMS!!!
IF SOMEONE CAN GIVE A HAND ON THIS!
THANKS

HI YES I'VE BEEN USING LOGIC FOR A LONG TIME TOO AND LOGIC IS NOT A CD BURNING PROGRAM, IT IS A MAKING MUSIC PROGRAM. YOU WILL NEED TO USE SOMETHING LIKE ITUNES OR TOAST TO BURN YOUR AIF MIX FILE TO AN AUDIO CD.
HOPE THAT HELPED!
WHAT!??!!
CAN YOU SPEAK UP A BIT..!??

Using logical database to fetch data in Module Pool programming

I am unable to use logical database to fetch data in case of Module pool programming. Has anyone ever faced problems with it...?

use f.m LDB_PROCESS....
refer demo program DEMO_LOGICAL_DATABASE

How can I use the Variable Delay VI (From DSP Module) to Deploy Variable Delay on Speddy-33

Dears,
I dont Understand How Can I Use the Variable Delay to Deploy Variable Delay on a Speedy-33 Kit

Hello,
Thank you for posting to the NI Forums!! You should be able to incorporate the Variable Delay.vi into your vi and then build as normal and the functionality of the vi should translate to the build. What type of build are you doing? Are you receiving any specific errors? Thanks!
Regards,
Margaret Barrett
National Instruments
Applications Engineer
Digital Multimeters and LCR Meters

How can I use LabVIEW 6 on a SCXI-FRQ8 module?

Hi, here is a description of our problem. We hope that you will be able to help us.
We bought from NI, a few years ago, some SCXI-FRQ8 modules. (Those modules were made by a company called Developpement Ingenierie in France) The problem is, we can not update to the version 6 of labview since we do not have the drivers to install Labview 6. The drivers we have are for Labview 5.x and 4.x.
Furthermore, we can not update those drivers by ourselves, since we do not have acces to the diagram of these VI drivers. We tried to contact that company, but no one answers. So maybe the company does not even exists anymore.
We would like to be able to install Labview 6 on these modules and if we can
make it work, we will probably buy some new SCXI-FRQ8 modules(if we can still buy them).
Thank you

The driver for the SCXI-FRQ8 provided by DI originally did not include the block diagrams. So if you try to use them in a newer version of LabVIEW, you will receive error messages because LabVIEW needs the source code to recompile the code into the newer LabVIEW format.
National Instruments can provide you with the code you need to use this module with LabVIEW 6. Request this code at http://www.ni.com/ask.
Raecine Meza
Applications Engineer
National Instruments

How can i use modal analysis in labview and Sound and Vibration toolset in my structural studies.

I am working on structural analysis of buildings during earthqauke.I ahve NI 4472, labView, sound and vibration toolset.Now i also want to carry out Modal Analysis. Where can i find thisin NI software.

There are third party software packages that support modal analysis. These include IDEAS from MTS, Smart Office from m+p, and ME Scope. You can use LabVIEW to save a file or export the data directly via Active-X. If you have some specific functions that you would like to see implemented in LabVIEW, drop a note to one of our developers, Hui Shao or myselfat : [email protected] on what you would like to see.
Kurt Veggeberg, BDM Sound and Vibration.
[email protected]

How to use logic:interate tag in this case? thanks a lot.

a javabean:
a{
int a;
ArrayList bList (to store some strings);
request.setAttribute("a",a);
then how can I use <logic:iterate> tag to loop to use <bean:write> tag to write out the strings contained by bList?

use getparams and get that attribute(arraylist)
define a bean in jsp with property as this attribute for which u should have a getter method in context
the following is to iterate through arralist of arraylist
<logic:iterate id="accList" name="<%=subAppContextName%>" ="accountsHoldedList">
<tr>
<logic:iterate id="accList2" name="accList">
<td> <bean:write name="accList2"/> </td>
</logic:iterate>
<td>
<jfp:link styleClass="appNavNext" warn="false" bundle="<%=bundleName%>" key="GiveNotice" paramId="selectedAccount" paramName="accList2" href="javascript:submitMyForm();"></jfp:link>
</td>
</tr>
</logic:iterate>
accountsHoldedList is the one which is set in Context and i am iterating to display it.
bye

How do I use a preamp for an input, but have it ouput through my speakers?

I'm using a Mobile Pre USB with the guitar plugged in through INput 2 and the Mic through Input 1. When I put the driver as the Preamp, I can't get the sound to output through my default Imac speakers.
How can I use the preamp while having the sound come out of the default speakers?
Thank you

If I understand your question right (which I'm not sure I do), you would go to your audio midi set up in the Utilities folder. From there you should see an option for setting up how your USB Pre operates and you should be able to select it's output as the internal speakers. If you use this option though you will not get any midi output unless you assign it to a virtual instrument or an internal audio object. If your not concerned with that then this should work just fine.

How to use Logical database in function module?

I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.

You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Here's the short-cut solution:
Green Apple tracks are MIDI files (so to speak). If you drag one from the loop browser (Capitol C Orchestral hit, as you mentioned in this exable) directly into the arrange page it creates the MIDI file and the instrument to play it back on.
HOWEVER.If you create and audio track first, THEN drag the green Apple loop onto that track, the loop will get "bounced" with the reverb in tact and you'll have the exact sound that you heard in the preview.
Make sense?

How do I use a recording deck with Logic?

Hey Guys,
I bought Logic Express with my mac at the end of 2008 and have since been using it with the built in mic on the mac. Recently though I have bought some song backing tracks and want to record higher quality. I bought a small mixing deck, 6 main ports. I figured I would plug the deck into the headphones port in the back of my imac, then the mic and headphones into the mixing deck. When I use logic though, It doesn't pick up anything from the mic, it just goes though the built in mic. HOW DO I FIX THIS!!???
I would be greatly indebted to anyone who can help me.
Many thanks,
Angus x

The headphones port outputs audio signal from Logic. Plug the mixer into the lin-in port.
JG

How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
The way I do it, is I assign all my drum tracks to a buss, say buss 1.
Then, on buss 2, I assign it's INPUT to buss 1.
So buss 1 (all the drums) are feeding into buss 2 simultaneously.
Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
Have a nice day

How can I use my Dx7 as a MIDI controller for Logic Pro 9? I'm using MIDI/USB cable but Dx7 doesn't appear in the 'set-up' list, what am I doing wrong?

I'm using Logic Pro 9 - 9.1.8
MacBook Pro Retina OSX 10.9.3
DX7 2 FD connected to my laptop with a MIDI/USB cable
When I click the 'scan all models' search in the 'Control Surfaces Set Up' there is no Yamaha DX7 in the list so how can I make Logic 'see' the DX7?

As Colin pointed out, you have to look first in the Audio MIDI Setup. If your MIDI Device doesn't show up there, then Logic cannot see it either (unless you are using Logic Remote on your iPad to play over Wi-Fi).
I'm curious about the "MIDI/USB cable you mention. If the DX7 has a standard 5-pin DIN MIDI out jack, then you have to connect that to a MIDI Interface first that converts the MIDI signal to send it over the USB jack out. Please note that you would see the MIDI Interface in the Audio MIDI Setup app and not the DX7 itself. Also, in Logic you would see the MIDI Interface in the Environment as a valid MIDI input device.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How do I use logic as a mulit timbre sound module???

Similar Messages

Maybe you are looking for