How do put a straight line over an "o" such as in Roti Grille?

How do I get a straight line over a letter "o" such as in Roti Grille?
Thanks

PeterBreis0807 wrote:
Unless there is something else out there that I am unaware of, Roti grill is an Indian cooking method.
Why the accent is needed I don't know, I was unaware it used one.
One more time you read wrongly
The OP wrote "*Roti Grille*" not "*Roti Grill*"
In French rôti requires the accent and grillé requires its accent too !
Yvan KOENIG (VALLAURIS, France) jeudi 28 janvier 2010 22:31:33

Similar Messages

Drawing a straight line over a video

Is it possible to draw a straight line over a video in CS6 and also to watch the video frame by frame to take exact timings?

Hi Jeff,
Back again! i have managed to put the line over the video and can have it on there as long or as short time as i wish, but it appears to be moving with the video and i need it to stay at a certain point and the video to carry on playing. Basically im trying to mark a point on a race track where the horse in the lead gets to, then i need the line to stay there for when the last horse comes to the line, with the lead horse moving on past. Currently the line doesnt stay on a specific point it on the video and go out of shot when the video moves, it appears to be moving with the video. I know the overlay is a static image but is there a way of making it look like it stays in a specific place on the video?
Hope this makes sense!
Thanks Kat

How to make a macron in Pages '09? (a straight line over a letter)

Does anyone know how to do a macron (you know a letter with a straight line indicating a long vowel) over a letter in Pages? I am using Hoeffler font, and I can't figure it out. I could really use some help.
Thanks
Maggi

+Menu > Edit > Special Characters > Punctuation+
Or for as you type:
+Apple > Menu > Systems Preferences > International > Input Menu > U.S. Extended Keyboard or Maori+
then close the panel.
In Finder on the upper menubar, click on the +American flag icon > select "U.S. Extended" or "Maori"+
Then to get the macron type first the "dead keys" +option with a" then the character you want the macron over.
The macron may or may not actually be in Hoeffler, but OSX should find it from a font that does have it, which may give you an odd character in the middle of your text depending how closely they match.
Some links for you:
http://tlt.its.psu.edu/suggestions/international/accents/codemac.html#osx
http://www.tomrobinson.co.nz/work/macronsosx.html
http://www.personal.psu.edu/staff/e/j/ejp10/psu/gotunicode/macron.html

How to draw only straight line instead of angled one??

Dear friends,
I saw a very good code posted by guru here(I think is camickr),
But I tried to change it and I hope to draw only straight line instead of angled one, can you help how to do it??
Thanks so much.
import java.util.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class DrawingArea extends JPanel
     Vector angledLines;
     Point startPoint = null;
     Point endPoint = null;
     Graphics g;
     public DrawingArea()
          angledLines = new Vector();
          setPreferredSize(new Dimension(500,500));
          MyMouseListener ml = new MyMouseListener();
          addMouseListener(ml);
          addMouseMotionListener(ml);
          setBackground(Color.white);
     public void paintComponent(Graphics g)
          // automatically called when repaint
          super.paintComponent(g);
          g.setColor(Color.black);
          AngledLine line;
          if (startPoint != null && endPoint != null)
               // draw the current dragged line
               g.drawLine(startPoint.x, startPoint.y, endPoint.x,endPoint.y);
          for (Enumeration e = angledLines.elements(); e.hasMoreElements();)
               // draw all the angled lines
               line = (AngledLine)e.nextElement();
               g.drawPolyline(line.xPoints, line.yPoints, line.n);
     class MyMouseListener extends MouseInputAdapter
          public void mousePressed(MouseEvent e)
               if (SwingUtilities.isLeftMouseButton(e))
                    startPoint = e.getPoint();
          public void mouseReleased(MouseEvent e)
               if (SwingUtilities.isLeftMouseButton(e))
                    if (startPoint != null)
                         AngledLine line = new AngledLine(startPoint, e.getPoint(), true);
                         angledLines.add(line);
                         startPoint = null;
                         repaint();
          public void mouseDragged(MouseEvent e)
               if (SwingUtilities.isLeftMouseButton(e))
                    if (startPoint != null)
                         endPoint = e.getPoint();
                         repaint();
          public void mouseClicked( MouseEvent e )
               if (g == null)
                    g = getGraphics();
               g.drawRect(10,10,20,20);
     class AngledLine
          // inner class for angled lines
          public int[] xPoints, yPoints;
          public int n = 3;
          public AngledLine(Point startPoint, Point endPoint, boolean left)
               xPoints = new int[n];
               yPoints = new int[n];
               xPoints[0] = startPoint.x;
               xPoints[2] = endPoint.x;
               yPoints[0] = startPoint.y;
               yPoints[2] = endPoint.y;
               if (left)
                    xPoints[1] = startPoint.x;
                    yPoints[1] = endPoint.y;
               else
                    xPoints[1] = endPoint.x;
                    yPoints[1] = startPoint.y;
     public static void main(String[] args)
          JFrame frame = new JFrame("Test angled lines");
          frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          DrawingArea d = new DrawingArea();
          frame.getContentPane().add( d );
          frame.pack();
          frame.setVisible(true);
}

Change the AngledLine class to store two points instead of 3 points (I would rename the class to be StraightLine). The code is much simpler because you just store the starting and ending points and you don't need to calculate the middle point.

How to Stop Flickering Straight Line in CS4

Hi all,
For some reason CS4 cause all my straight lines to flicker. For example, if I have a video of a form with lots of straight lines on it, the rendered video of the form flickers like crazy?? I've tried to use the Anti-Flicker Filter but it made it worse?
Please!

More information is good
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/

How to make a straight line of points in a curve in CS6

In PSCS5 and earlier, I used to be able to make a straight line of points in a curve by placing 9 points on the straight line curve. I did this by drawing a small straight line at the bottom of the curve using the pencil tool and then clicking the curve point icon.
I can't seem to do this with CS6. Any thoughts?
Thanks,
Matthew Kraus

Did you not ask a similar question a while ago?
http://forums.adobe.com/message/4524084#4524084

How to put a Jpanel always over a JtextArea ?

I want to have a little Jpanel above a JTextArea.
At the initialize section, I add first the Jpanel and after the JtextArea (both in a 'parent' Jpanel with null layout)
When I run the program I see the Jpanel over the JtextArea, but when I write on it and it reaches the area when the Jpanel is placed, the JtexArea brings to front and the Jpanel is no longer visible.
So, how can I have my Jpanel on top always ?
And another question , is there a hierarchy that control that I Jpanel is always over a Jbutton (even if the initial z-order of the button is higher than the Jpanel's)
Thanks
( I do not send any code because it is so simple as putting this two components into a Jpanel)

tonnot wrote:
And another question , is there a hierarchy that control that I Jpanel is always over a Jbutton (even if the initial z-order of the button is higher than the Jpanel's)JLayeredPane
( I do not send any code because it is so simple as putting this two components into a Jpanel)Try it with a JLayeredPane and if you still have problems, post a [SSCCE (Short, Self Contained, Compilable and Executable, Example Program)|http://mindprod.com/jgloss/sscce.html].
db

How to put drop down menu over iframe?

I created drop down menu in A-Master with height 100 pixels.
On a page which uses A-Master template I've put youtube video, example:
<iframe width="1000" height="500" src="//www.youtube.com/embed/8eDuupJ9Uus" frameborder="0" allowfullscreen></iframe>
and when I export HTML, Iframe video is over dropdown menu so I can't see this menu, iframe is on top of it, how can I place dropdown menu on top of this iframe?
Tried to search whole internet with no good results, I have only found other people has same problem.
...and I have tried this "wmode="transparent" too:
<iframe width="560" height="349"src="http://www.youtube.com/embed/rLVCjnEGrqQ?wmode=transparent"frameborder="0" allowfullscreen wmode="transparent"></iframe>
was no good

Your menu layer should be on top of everything!
Regards,
Frank

How to put "report total:" line in bold

I have a report with sums. How can I specify to show the "report total:" line in bold?

I have a report with sums. How can I specify to show
the "report total:" line in bold?How are these sums being created? In other words, are you creating a calculation for each row in your query so you have a column of total values or is this a grouping sum calculation in your query? Or are you just using the sum checkbox on a report column in the Report Attributes definition page?
When I use the latter HTML DB automatically adds a bold tag for me. Might have to do with the theme I'm using (theme 9).
Anyway, there are probably a number of ways of accomplishing this. If the totals are in one of your columns you can add the font-weight:bold style to that column using the CSS Style setting for the column attributes. The most likely will probably be a CSS tweak.
Take a look at your page source and see what class is being used for the totals and then we can see if we can tweak the CSS to make this happen.
Earl
Message was edited by:
Earl

How to put text line just for a moment ?

Hi,
Do you know how to put a text line just for one photo? I mean I have more photos in one portfolio but i need the text line to be seen just for one photo for the others no.
Thank you in advance.

You can use composition for this , where you can insert text frame for that specific photo where you want to add some description and for rest dont use text frame.
Thanks,
Sanjit

How to put line break in the text

Hi guys,
This is a simple problem.i don't know how to concat a line break while creating a text.
I am looping through the results of a query and want to form the text using the results.
For each row of the resultset,I want to create a new line in the text i create.
I was wondering how to put a new line in the text.
I thought I can concat '\n' ,but it does not work.
the code snippet in the procedure is :
for c1_rec in c1 loop
vMsg := ' There are ' || c1_rec.total ||
     ' documents of type ' || c1_rec.doc_type || '\n' ;
end loop;
Please give the solution.
Thanks in advance.

Thank you Mark.
I tried your suggestion.But line break is not working in email.
Here is how my code is
in procedure 1 ,i create the message String as :
for c1_rec in c1 loop
vMsg := vMsg || ' ' || today_str || ' - ' || c1_rec.total ||
     ' Total inbound documents from : ' || c1_rec.target_value || CHR(13)||CHR10) ;
dbms_output.put_line(' ' || vMsg);
end loop;
--here sending mail calling another procedure
sendmail( '[email protected]' ,'[email protected]' , 'Test Subject ' , vMsg );
In Procedure 2( i.e sendmail procedure )
i am preparing email server connection from and to adresses .Then i am preparing and sending message as
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
conn:= utl_smtp.open_connection( EmailServer, Port );
     utl_smtp.helo( conn, EmailServer );
     utl_smtp.mail( conn, SENDER);
     utl_smtp.rcpt( conn, RECEIVER )
mesg:= 'Subject: ' || SUBJECT || crlf ||
               'Date: '||TO_CHAR( SYSDATE, 'Dy, dd Mon yyyy hh24:mi:ss' )||
               crlf ||
               'From:'||SENDER|| crlf ||
               'To: '||RECEIVER || crlf ||
               'Content-Type: text/html; charset=ISO-8859-1' || crlf ||
               '' || crlf || MESSAGE ;
     utl_smtp.data( conn, mesg );
     utl_smtp.quit( conn );
even now the mail we are getting is not having the line break.I am having line break in dbms output,but not in the mail.
Is there any mistake how I am sending the mail.Or is there any other way we can put line break in the text
Thank you.

Newbe - straight line with different curves at each end

I'm generally not using Illustrator as I'm sure you can tell. I need several curly brackets, but none will really do as they will cover varioius lengths and should be the same size. It looks like the easiest way will simply be to create one putting two straight lines together, but I cannot even determine how to get a curved end at one end of the line - yet alone a second different curve on the other end. Thanks. Rick

shiesl,
For the curly bracket shape you may consider quarter circles at the ends, and a pair at the middle, all with the same radius.
You may:
1) Create a circle with the Ellipse Tool and cut it into quarters at the Anchor Points; you may then use all the bits or just one or two of them with copies,
2) Place the first quarter with the inner end where you want the first straight part to start (on one side of the intended straight part),
3) Place the second quarter (corresponding to a 180 degrees rotation) oppositely (on the other side of the intended straight part) where you want the firrst straight part to end,
4) With the Direct Selection Tool select both inner ends and Object>Path>Join, now you have one half curly bracket,
5) Object>Transform>Reflect, Align the two halves, and Join them at the midlle.
For different lengths, you may Direct Select the two Anchor Points at either end and move them away from the middle (you may use arrow, Object>Transform>Move, or other ways).
If you just want roundings at the ends, you may simplify the suggestion here, just having the second one on the same side in 3) and finish with 4).

HT2523 I have text edit and cant seem to get any of my fonts or double spacing onto my screen. I se it for college so it would be nice if i could figure out how to put it on there so its easier to type up a paper

So i have a mac book air. And i am trying to type a paper but none of the tools are on m document for easy access. I have to go in and try to change everything under the settings manual. I was wondering how i put all of the easy acces tools such as font spacing and styles all on the front part of my screen not up at the top menu area. I just want it where its suppossed to be not hidden. How do i do that? Thanks.

Thank you so much
Kiss Kiss Kiss Kiss
Life saver
Best wishes and Many thanks
Samantha

Can't figure out how to put a Line "-" over and "E" for pronunciation...

I can see how to do it for other accent marks but not for the straight line.
Using Appleworks, I would like the "E" in "TELA" to have a line "-"over it, so it is pronounced properly.
I have been at this for at least two hours.
Any suggestions?
thanks
Powerbook Mac OS X (10.4.6)

One could use the Equation Editor to construct any character under a bar quite easily. Launch Equation Editor from the Edit menu. Choose a font that matches your text and set the style to "text". Begin typing your word. When you get to the letter(s) requiring the overbar, select the overbar from the appropriate dropdown menu (the one you want is just right of center in the bottom row), then type your character(s). Hit the right arrow one time (and you'll probably have to reset the font style to "text" again) and continue typing your word. Close the Equation Editor window to place the entry into your document.

How Do I Draw An Angled Straight Line?

Hello,
I'm restoring an old B&W photo of my Grandmother walking in Atlanta in around 1932. I'm trying to make the power lines of the trolley cars as realistic as possible. Consequently, I'd like to be able to draw these power lines better than they appear in the photo - I've cloned them in and tried to enhance them from the way they are originally, but they are not as straight and authentic as I would like them to be.
Of course, I know how to draw a straight perpendicular or horizontal line, but is there also a way to draw them when they are at an angle?
Where are you, Buko and Lundberg02 - Hope you guys are doing ok.
Thanks for any help you can muster up.
Burtron

Scott,
I just did it! And to think that I went all that time trying to draw those lines as steady as I could - Wow, I thought that surely Adobe would have a way. I just waited too long to get around to asking.
What a difference this will make!
Also, in this same old photo is a building that was torn down long ago, I'm sure, but it's after working with it a while, and using the contrast to bring out the images on this building, I began to realize that the building had more and more images - I mean all over it - It's amazing - I don't think that anyone these days would go to all the trouble that this guy did - whoever he is - That's my next challenge - I need to find out who this architect was. I've done all kinds of searches on google, but to no avail. Going to contact the state archives.
Do you have any suggestions?
Thanks Again,
Burtron

How do put a straight line over an "o" such as in Roti Grille?

Similar Messages

Maybe you are looking for