How do u handle the user parameters for a currency field.

How do u handle the user parameters for a currency field.
   Decimal saperator and a hundreds saperator. (depending upon the user parametes set for the user the saperators may differ)
      Eg: currency field: 13.896,01 (In this case u2018,u2019 is a thousand saperator and u2018.u2019 is a decimal saperator) How to handle this one.
Regards,
Ram.

Hi,
Try this code....
DATA: V_KURSF1 TYPE c LENGTH 10,
        v_kursf2 type c LENGTH 10,
        v_dcpfm    TYPE xudcpfm, "Decimal or Thousand Notation
        v_thousand TYPE char1,   "Thousands Notation
        v_decimal  TYPE char1.   "Decimal Notation
  CONSTANTS:    c_x      TYPE char1 VALUE 'X',
                c_y      TYPE char1 VALUE 'Y',      "Value Y
                c_comma  TYPE char1 VALUE ',',      "Comma
                c_point  TYPE char1 VALUE '.',      "point
                c_blank  TYPE char1 VALUE ' '.      "Blank
  IF v_dcpfm IS INITIAL.
    SELECT SINGLE dcpfm
    FROM usr01
    INTO v_dcpfm
    WHERE bname = sy-uname .
    IF sy-subrc = 0.
      CASE v_dcpfm.
        WHEN c_x.
          v_decimal  = c_point.
          v_thousand = c_comma.
        WHEN c_blank.
          v_decimal  = c_comma.
          v_thousand = c_point.
        WHEN c_y.
          v_decimal  = c_comma.
          v_thousand = c_blank.
      ENDCASE.
    ENDIF.
   ENDIF.
           Find c_point in  wa_segment-exchange_rate.  ( Eg:ield)
          if sy-subrc = 0.
            replace c_point in wa_segment-exchange_rate with v_decimal.
          endif.

Similar Messages

  • How do I change the User Agent for Safari on my iPad?  I need this for a specific website for work.

    How do I change the user agent for Safari on my iPad?  I know how to do it on my desktop version, but I need it for my iPad.

    You can rename the iPad here:
    Settings - General - About - Name
    For Siri make sure he has himself as a contact in the Contacts app then:
    Settings - General - Siri - My Info and select his contact info

  • How can we restrict the users/planners for a planning book?

    Hi experts,
    How can we restrict the users/planners for a planning book?
    Thanks,
    Naga.

    Hi Naga,
    we describe this in our SAP Demand and Supply Network Planning rapid-deployment solution.
    Access this area directly via
    http://service.sap.com
    /rds-dpa
    In the configuration guide Demand Planning Settings, Macros and Chart
    Engine (DP3) read Appendix: Setting up Roles and
    Authorizations.
    BR Frank

  • How to find out the User Details for the particular transaction

    Hi,
    Actually AJAB -Asset Year closing was done by One User.How and Where to find out the User details who executed the Transaction.Kindly tell me the T-code for this.
    Thanks
    Sap Guru

    Hi:
    Please contact you basis administrator.Give him the T.code and date when Year closing was done. He may resolve your problem.
    Please let me know if you need more information,
    Assign points if useful.
    Regards
    MSReddy

  • How do we restrict the user access for a particular G/L account

    Dear Experts,
    At our customer site, we follow master / derived role concept for authorisations.
    We have a requirement to restrictict user at G/l account authorisation level.
    I am aware that every g/l account account has a authorisaition group. But g/l account authorisation is a non-org value for which the present value is * for brgru, we cannot restrict by user/org. At our customer site the authorisations are provided at master role level for a designation and derived role is restricted for a plant, BA etc..
    Is there is any user parameter level restriction which can handle this requirement, i mean user parameter for specific g/l account, as we do LIF pid to restrict vendor level access.
    Appreciate your suggestions ASAP.
    Best regards,
    M.Kumaran

    Depends.
    What are you trying to protect? GL account masterdata (FS00) or FI document creation for specific GL accounts?
    Without knowing more about the design principles behind your roles, your release or other restrictions, I would suggest:
    (1) grouping off the GL accounts you want to protect in authorization groups (maintained via FS00);
    (2) deactivating either object F_BKPF_BES (if your trying to restrict FI document creation) or object F_SKA1_BES (if your trying to restrict access to GL account masterdata) or both in master/derived role;
    (3) create several separate roles that would contain only the aforementioned objects with access to specific GL account groups;
    (4) assign the roles from step 3 to users as required.
    Hope this helps.

  • How do I get the user information for a page?

    I would like to display information about the person that created a page in CQ.  I know I can get the createdBy information from the page properties, but how can I turn that into a user object where I can get more detialed information about that user?

    If you are within an OSGi bundle you can use the SlingRepository Service. Now it depends how you develop your OSGi services and components. I use the maven scr plugin for this. With this plugin it is possible to get references to services with java annotaions.
    Example:
    @Component(name="SampleService",
            label = "SampleService",
            description = "SampleService",
            immediate = true, enabled = true, metatype = true)
    @Services({ @Service(value = SampleService.class) })
    @Properties({
    @Property(name = "service.description", value = "SampleService"),
    @Property(name = "service.vendor", value = ") })
    public class SampleServiceImpl implements SampleService
    @Reference(policy = ReferencePolicy.STATIC)
    private SlingRepository repository;
        public void openAdminSession() {
            Session session = null;
            if (repository != null) {
                try {
                    session = repository.loginAdministrative(null);
                    //do something here
                } catch (RepositoryException e) {
                    LOG.error("Unable to open admin session:" + e.toString());
                } finally{
                                              if(session != null){
                          session.logout();
    To access a service from a JSP page you can use the reference of the SlingScriptHelper. You have to use the <cq:defineObjects/> tag.
    Example jsp:
    <cq:defineObjects/>
    SlingRepository repository = sling.getService(SlingRepository.class);
    Session session = null;
            if (repository != null) {
                try {
                    session = repository.loginAdministrative(null);
                    //do something here
                } catch (RepositoryException e) {
                    LOG.error("Unable to open admin session:" + e.toString());
                } finally{
                                              if(session != null){
                          session.logout();

  • How to find the user-exit for transaction fpp2

    Hi experts,
    could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

    Hi,
    Use the following program to find user exits of specified code.
    *& Tables
    TABLES : tstc,     "SAP® Transaction Codes
             tadir,    "Directory of Repository Objects
             modsapt,  "SAP® Enhancements - Short Texts
             modact,   "Modifications
             trdir,    "System table TRDIR
             tfdir,    "Function Module
             enlfdir,  "Additional Attributes for Function Modules
             tstct.    "Transaction Code Texts
    *& Variables
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
    START-OF-SELECTION.
    Validate Transaction Code
      SELECT SINGLE * FROM tstc
        WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
           WHERE pgmid    = 'R3TR'
             AND object   = 'PROG'
             AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
             WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
              WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
              WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
              WHERE pgmid    = 'R3TR'
                AND object   = 'FUGR'
                AND obj_name = enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
    Find SAP® Modifications
        SELECT * FROM tadir
          INTO TABLE jtab
          WHERE pgmid    = 'R3TR'
            AND object   = 'SMOD'
            AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
          WHERE sprsl EQ sy-langu
            AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(95) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
          WRITE:/(95) sy-uline.
          LOOP AT jtab.
            SELECT SINGLE * FROM modsapt
            WHERE sprsl = sy-langu AND
            name = jtab-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            WRITE:/1 sy-vline,
            2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
          ENDLOOP.
          WRITE:/(95) sy-uline.
          DESCRIBE TABLE jtab.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No of Exits:' , sy-tfill.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'No User Exit exists'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'Transaction Code Does Not Exist'.
      ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    I executed the above program but there are no user exits for the specified Transaction.
    Thanks,
    Naveen Kumar.

  • How to find user exits for a specific field

    hi,
        How can we find a user exit for a specific fields .
    as i know Three ways to search user-exits
    1. SE80 look includes in a packages with name user-exits
    2.  by zreport which will fetch user-exit in a T-CODE
    3. SMOD
    but what if we have to find a user-exit for particular field for e.g bupla(bussiness place) in MIRO.
    Please suggest me.
    Thanks and  Regards ,
    Rahul Singh.

    Hi Rahul,
    Here is the procedure to create field exits.
    Step by step procedure for creating Field Exits
    There are eight steps to creating a field exit:
    Step 1: Determine Data Element
    Step 2: Go To Field Exit Transaction
    Step 3: Create Field Exit
    Step 4: Create Function Module
    Step 5: Code Function Module
    Step 6: Activate Function Module
    Step 7: Assign Program/Screen
    Step 8: Activate Field Exit
    Step 1: Determine Data Element
    u2022     Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
    Step 2: Go To Field Exit Transaction
    u2022     The transaction to create field exits is CMOD.
    u2022     You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
    u2022     From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
    u2022     After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
    NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
    Step 3: Create Field Exit
    u2022     From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
    u2022     After choosing this menu path, a dialog box will prompt you for the appropriate data element .
    u2022     Enter the data element name and click the u2018Continueu2019 pushbutton.
    u2022     Now, you will be able to create the function module associated to the data elementu2019s field exit.
    Step 4: Create Function Module
    u2022     You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the u2018Continueu2019 pushbutton.
    u2022     In the u2018Function moduleu2019 field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
    FIELD_EXIT_<data element>
    u2022     You can add an identifier (an underscore followed by a single character ).
    u2022     The first function module for a data elementu2019s field exit must be created without an identifier.
    u2022     To create the function module, click on the u2018Createu2019 pushbutton, choose menu path Function module -> Create, or press u2018F5u2019.
    u2022     After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing u2018Enteru2019, you will be able to go ahead and create the function module.
    u2022     Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
    Step 5: Code Function Module
    u2022     From the function moduleu2019s attributes screen, click on the u2018Source codeu2019 pushbutton or choose the Goto -> Function module menu path to the code of the function module.
    u2022     Here you will add your desired functionality for the field exit.
    u2022     Remember that field exitu2019s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
    u2022     You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
    Step 6: Activate Function Module
    u2022     After coding the function module, you must remember to activate it.
    u2022     Use the Function module -> Activate menu path to activate the function module.
    u2022     At this point, you can return to the field exit transaction.
    u2022     You should be able to 'green arrow' back to this transaction.
    u2022     When you return to the field exit transaction, you will see an entry for the newly created field exit.
    u2022     At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
    u2022     Also, the field exit will not be triggered yet because it is inactive.
    Step 7: Assign Program/Screen
    u2022     This step is only needed if you want to make a field exit local.
    u2022     To make a field exit local, select the field exit and click on the u2018Assign prog./screenu2019 pushbutton.
    u2022     In the dialog box , indicate the appropriate program name and screen number.
    This information indicates that the field exit is local to the specified screen in the specified program.
    u2022     In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the u2018Fld. Exitu2019 field.
    u2022     If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
    u2022     If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
    Step 8: Activate Field Exit
    u2022     The field exit must be active for it to be triggered by the system.
    u2022     Activate the field exit by choosing the Field exit -> Activate menu path.
    u2022     After assigning the field exit to a change request, its status will change to u2018Activeu2019 and it will be triggered automatically on the appropriate screen(s).
    NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
    Execute the transaction SE38 with PROGRAM NAME - RSMODPRF
    Then give the Data Element Name for which field you want to create the exit(Just cross check with your field data element) and execute.
    then it takes you to SE37 with the function module name FIELD_EXIT_<DATA ELEMENT NAME> and then create the same function module.
    and in the coding part, You can write your logic to display the output of that field. and activate it.
    once you complete the above,
    Again execute SE38 transaction with program RSMODPRF and again click on Execute button without any Data Element Name. Now you select the data element which you have created and click on Assign prog/ Screen button and assign the program name and screen number of the filed and click on the menu Field Exit and Activate.
    Hope it helps.
    Regards
    Radhika
    Edited by: Radhika Pande on Nov 26, 2009 7:58 AM

  • WD ABAP - Reading the URL Parameters for FPM application

    Hi,
    As per the Custom requirment,
    I want to pass URL parameters for WD ABAP application (sap/bc/webdynpro/dbm/app_veh_cus_search) which uses FPM.
    example: sap/bc/webdynpro/dbm/app_veh_cus_search?Customer=12345&fromExternal=true
    I am facing difficulty in reading the URL parameters.
    How to read/get the URL Parameters for an FPM WD ABAP application????
    Observation:
    I tried reading the parameter in Window --> HANDLEDEFAULT method. But could NOT read the Parameters from here for FPM application whereas if I create a Z Custom application then I could read the URL Parameters. so the issue is in reading the URL Parameters for FPM application.
    Kindly support
    Regards,
    Hussain

    Hi Hussain,
    You can do this either with the methods of interface if_fpm_parameter...
    DATA lo_param TYPE REF TO if_fpm_parameter.
    lo_param = cl_fpm_factory=>get_instance( )->mo_app_parameter.
    CALL METHOD lo_param->get_value
        EXPORTING
            iv_key   = parameter_name
        IMPORTING
            ev_value = parameter_value.
    or a more generic approach using class cl_wd_runtime_services...
    cl_wd_runtime_services=>get_url_parameter
    Cheers,
    Amy

  • How to get the histoical data for newly added field in the cube?

    Hi Experts,
    I have small doubt on remodeling the infocube.
    After adding the characteristic or keyfigure  to a cube by using remodeling concept, how can I get the historical data for that particular field.
    I have searched in SDN also but I didn't get proper information.
    Please excuse me if I posted repeated question.
    helpful answer will be awarded with poitns.
    Thanks & regards,
    Venkat.

    hi
    depending on your customer need you could use the remodelling functionnality but sometimes you have no way to retrieve what you want so another option you should consider is the following:
    Advantages
    that will cost less effort and guarantee the result.
    Drawbacks
    data is redondant for a while
    space (depending on the volume of historical data)
    So here are the steps :
    step 1Adjust your extraction process according to the fields you need to add to populate the cube.
    step 2 Then create a dso next or even a cube, feed the dso with a full load with the enhanced extractor you adjusted with the new fields in step 1 only once in fact this should be one shot.
    step 3 Copy the query to the previous built  multi-provider on top of the new historical data from dso and the running live delta cube. Adjust the queries if necessary.
    optionnal Then if you want to get rid of the dso or new cube for historical data you could empty the actual one push the data from the new data provider and that's all.
    bye
    Boujema

  • How to  find the user exit for a screen..

    Hi,
    plz help me how to find the user exit for a screen..?
    Regards
    Anbu

    Hi,
    check this program this will give you the list of user-exit and BADI for the perticular Tcode.
    REPORT  zuserexit_badi.
    TABLES : tstc,
    tadir,
    modsapt,
    modact,
    trdir,
    tfdir,
    enlfdir,
    sxs_attrt ,
    tstct.
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode,
    p_pgmna LIKE tstc-pgmna .
    DATA wa_tadir TYPE tadir.
    START-OF-SELECTION.
      IF NOT p_tcode IS INITIAL.
        SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
      ELSEIF NOT p_pgmna IS INITIAL.
        tstc-pgmna = p_pgmna.
      ENDIF.
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'PROG'
        AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
          WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
            WHERE pgmid = 'R3TR'
            AND object = 'FUGR'
            AND obj_name EQ enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
        SELECT * FROM tadir INTO TABLE jtab
        WHERE pgmid = 'R3TR'
        AND object IN ('SMOD', 'SXSD')
        AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(105) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
          SORT jtab BY object.
          DATA : wf_txt(60) TYPE c,
          wf_smod TYPE i ,
          wf_badi TYPE i ,
          wf_object2(30) TYPE c.
          CLEAR : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
          LOOP AT jtab INTO wa_tadir.
            AT FIRST.
              FORMAT COLOR COL_HEADING INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 'Enhancement/ Business Add-in',
              41 sy-vline ,
              42 'Description',
              105 sy-vline.
              WRITE:/(105) sy-uline.
            ENDAT.
            CLEAR wf_txt.
            AT NEW object.
              IF wa_tadir-object = 'SMOD'.
                wf_object2 = 'Enhancement' .
              ELSEIF wa_tadir-object = 'SXSD'.
                wf_object2 = ' Business Add-in'.
              ENDIF.
              FORMAT COLOR COL_GROUP INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 wf_object2,
              105 sy-vline.
            ENDAT.
            CASE wa_tadir-object.
              WHEN 'SMOD'.
                wf_smod = wf_smod + 1.
                SELECT SINGLE modtext INTO wf_txt
                FROM modsapt
                WHERE sprsl = sy-langu
                AND name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
              WHEN 'SXSD'.
    For BADis
                wf_badi = wf_badi + 1 .
                SELECT SINGLE text INTO wf_txt
                FROM sxs_attrt
                WHERE sprsl = sy-langu
                AND exit_name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED ON.
            ENDCASE.
            WRITE:/1 sy-vline,
            2 wa_tadir-obj_name HOTSPOT ON,
            41 sy-vline ,
            42 wf_txt,
            105 sy-vline.
            AT END OF object.
              WRITE : /(105) sy-uline.
            ENDAT.
          ENDLOOP.
          WRITE:/(105) sy-uline.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No.of Exits:' , wf_smod.
          WRITE:/ 'No.of BADis:' , wf_badi.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(105) 'No userexits or BADis exist'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(105) 'Transaction does not exist'.
      ENDIF.
    AT LINE-SELECTION.
      DATA : wf_object TYPE tadir-object.
      CLEAR wf_object.
      GET CURSOR FIELD field1.
      CHECK field1(8) EQ 'WA_TADIR'.
      READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
      MOVE jtab-object TO wf_object.
      CASE wf_object.
        WHEN 'SMOD'.
          SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
          CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
        WHEN 'SXSD'.
          SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
          CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
      ENDCASE.
    Reagards,
    Bharat.

  • How to set the connection parameters for SQL

    How to set the connection parameters for SQL to access the MS Access database
    Attachments:
    Quick_SQL.vi ‏21 KB
    Doc1.doc ‏45 KB
    db1.mdb ‏112 KB

    Right-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
    This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
    If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).

  • How can i obtain a user guide for the ipod nano 16GB 5th gen. with out printing it off the computor

    How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.

    You can't, at least not the one provided by Apple.
    B-rock

  • How to find the user exit for order cancellation

    I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
    I have got a Zreport where this order should not come as open order item.
    Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
    In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
    My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
    Regards.

    hi
    pls tell me t.code so that i will send all user exits related to that particular t.codes
    Thanks & Regards
    phaneendra

  • The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

    The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

    Thanks a lot for the response. Yes, I am checking my C: drive data thoroughly now, including the hidden folders, to ascertain if something else can be moved, as per your suggestion.

Maybe you are looking for