How do you allow one component at a time in the GUI to be selected?
I have a tree and a combo box in my GUI. Does any one know of a method or way to allow the selection of one component at a time in the GUI only?
For example, if i selected a node in the tree (it becomes highlighted), then made a choice from the combo box...I would like the node in the tree to be deselected.
Thanks!!!
Yeah add a focuslistener to everything and on focuslost clear the selection
Similar Messages
-
Can you delete one song at a time on the ipod shuffle 4th generation?
can you delete one song at a time from ipod shuffle 4th generation?
Hi kaytlynn yeager,
Thanks for the question. Based on what you stated, it seems like you want to manage what songs are on teh iPod shuffle. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Manage content manually on your iPhone, iPad, and iPod - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
How do you delete one call at a time?
how do delete one call at a time rather than the entire list?
At the present, you can't. It's all or nothing.
-
How do you rotate one page at a time?
When I choose Rotate View - Clockwise, it rotates the whole document. I want to rotate one page at a time.
Thanks
Ray
Adobe Reader for Mac, 8.12Can't do that with Reader.
-
How to open only one clip at a time in the source monitor?
Ok the answer to this question may be simple.. hopefully...
At the moment each time I open a clip in the source monitor it adds it to the dropdown list.
Fine... but I am opening and closing hundreds of clips in a day and after a while I noticed it seemed to be slowing down the whole PPCS5.5 system.
It appears that PP seems to be keeping each clip I open... active.
Is there a way to allow only one clip to be open at a time in the source monitor... other than having to close them all first??? (would be ideal if there was some kind of shortcut like shift-doubleclick)SonyZ7's can record to compact flash cards as well as tape, so I generally log and transfer from the cards.
So I guess I should do a bit more research on workflow's in Pr
No probs, here's a bunch of MediaInfo...
General
Complete name : /Volumes/Rugged 1TB/Business/WAPLES 10.October/Check It 2011 Event/Check It 2011 event footage/001 CheckIt2011.mov
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 195 MiB
Duration : 1mn 0s
Overall bit rate : 26.9 Mbps
Encoded date : UTC 2011-09-08 21:37:37
Tagged date : UTC 2011-10-28 11:50:04
Writing library : Apple QuickTime
Original source medium : Check It event CF2
©TSC : 2500
©TSZ : 100
Video
ID : 1
Format : DV
Codec ID : hdv3
Duration : 1mn 0s
Bit rate : 25.0 Mbps
Width : 1 416 pixels
Original width : 1 440 pixels
Height : 1 062 pixels
Original height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:2
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.665
Stream size : 181 MiB (93%)
Language : English
Encoded date : UTC 2011-09-08 21:37:37
Tagged date : UTC 2011-09-08 21:37:37
Material_Duration : 61560
Material_StreamSize : 192330610
Material_FrameCount : 1539
Audio #1
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 1mn 0s
Bit rate mode : Constant
Bit rate : 768 Kbps
Channel(s) : 1 channel
Channel positions : Front: L
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 5.57 MiB (3%)
Language : English
Encoded date : UTC 2011-09-08 21:37:37
Tagged date : UTC 2011-09-08 21:37:37
Material_Duration : 61560
Material_StreamSize : 5909760
Audio #2
ID : 3
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 1mn 0s
Bit rate mode : Constant
Bit rate : 768 Kbps
Channel(s) : 1 channel
Channel positions : Front: R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 5.57 MiB (3%)
Language : English
Encoded date : UTC 2011-09-08 21:37:37
Tagged date : UTC 2011-09-08 21:37:37
Material_Duration : 61560
Material_StreamSize : 5909760
Menu
ID : 4
Language : English
Encoded date : UTC 2011-09-08 21:37:37
Tagged date : UTC 2011-09-08 21:37:37 -
How do you advance one line at a time (text) within each slide?
In PowerPoint you can either present an entire slide at one time or make each bulleted line in the slide appear line by line as you click the mouse button.
I cannot figure out how to do this in Captivate. I am only able to advance an entire slide at one time.The easiest way would be to import the slides from PowerPoint using the high-fidelity import setting (assuming you're using Captivate 7 with a PC and a newer version of PowerPoint).
The "all-Captivate" way is to make several full-slide transparent "buttons" that display one after the other, play for a set period of time, then pause until the next click. You'd then adjust the text box duration in the timeline, and add effects (if desired). (You could also use "continue" buttons, but full-slide buttons would better duplicate the PowerPoint behavior.) -
How do you ALLOW SSL through 8080 Proxy set via the browser?
1) I installed Sun Proxy Server
2) Requested Verisign Certificate
3) Installed the Certificate
4) I enabled the Security to use the Certificate server-cert (Configure HTTP Client)
5) Set up the browser to use the proxy server and port 8080
6) I am unable to access our https:// application.
7) Now, the question is, how do I use it. The help procedures do not tell you how you use it. Using Etheral and it shows the following errors:
CONNECT w2k3-interop:8443 HTTP/1.0
Server: Sun-Java-System-Web-Proxy-Server/4.0.2
Date: Mon, 06 Mar 2006 22:46:03 GMT
Content-length: 194
Content-type: text/html
Connection: close
HTTP/1.1 403 Proxy denies fulfilling the request
Server: Sun-Java-System-Web-Proxy-Server/4.0.2
Proxy denies fulfilling the request
Your client is not allowed to access the requested object.
8) What I'm I missing?
9) What do I have to configure in order to get it working?Try adding this line to your obj.conf.
what it does is to allow ssl traffic to 8443 port for any webserver.
<Object ppath="connect://.*:8443">
Service fn="connect" method="CONNECT"
</Object> -
How To Re-Compile ONE Component in Real-Time Without CF Restart?
Is there a way?
I've seen tricks for restarting the application, but I suspect this still kills all active sessions, and we have quite a few going on.
I just have one CFC I need to recompile to get some changes in place, but I don't want to upset the entire apple cart.
Is there a way?
RLSI like this idea and will give it a shot next time for sure. It would be so nice to find a way to do that without having to restart CF in Production to make a hotfix.
I will review those settings to see what the impact might be. I wouldn't want to affect long-term efficiency for short-term occasional satisfaction.
BKBK, thank you very much for your help and suggestions!
RLS -
How do you share one Itunes library between accounts in the same computer?
I have a new I-mac and I set up my Itunes library on the main account in the I-tunes folder, as a default. I set up a second account for my wife - how can I share the music in the main library without having to transfer it to a separate folder under her username?
Click here and follow the instructions.
(38551) -
How do you see what bitrate your music is on the latest iTunes?
How do you see what bitrate your music is on the latest iTunes?
select
Music
Above the first song there are colums you can customize , select bitrate from that menu
tap two fingers on the trackpad will open up the menu to customize after moving the pointer to that field -
How do you make one long track into multiple tracks?
How do you make one long track in itunes into multiple tracks? Is there a way to do that?
I found another solution too through Garageband. I don't know if it was easier, but I liked this way of creating seperate tracks.
First, You put the long track into Garageband.
-then you create a New Basic Track under Track Tab-create as many of those as tracks you want to make
-also make sure the headphones button is lit up under each New Basic Track-this allows it to be a 'solo' track.
-then you can start cutting music-with the long strip find where you want to split into a new track and drag that half down into each New Basic Track.
-Once you are done, press Option Z and a purple little triangle will appear up by the measures. drag the triangle to the end of the first track-this allows it when sharing to itunes to just record the particular track you want, it puts a stop/end to that track.
-then, make sure the track you want to share is highlighted the bright orange and go to share, 'send to itunes'
-it will send that to itunes and you can rename it in itunes.
-Go back to Garageband-delete the first track you successfully shared and move the next one up to where that one was. Slide it accross to the left so it is at the beginning, press option Z and move the purple triangle where you want it to be...and you are good to repeat until all your tracks are done!
I am a very visual person, and this helped to see where I was cutting each track, just another way! -
How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]] -
How can you make one button preform different actions in Xcode?
How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??
Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application. -
How do you use one managed session bean from another?
Hello -
I am a complete newbie to JSF coming from Struts 1. My question is how do you use one managed bean from the method of another one? I think this would be a common senario. For example I put a bean in session scope when a user logs in and in a different method within a different bean I want to get some of this user's information. What is the correct way to retireve one bean from a method in another with session scope?
Also what would the code look like to retieve another bean from the method of a managed bean where the bean you want to retrieve has application scope?
Thank you in advance.Sinplicity wrote:
Could you be a bit more specific? If a bean is configured in the faces config file then all of it's properties are managed, correct?Not necessarily.
What would the code look like to retireve the bean?You don't retrieve it, it has been injected.
Can I retrieve the whole bean or just a property of the bean. I would be really interested in seeing how this is done in code? And would really love a bit more information on what it means to be a managed property?Time to consult a JSF tutorial. -
hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?
There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.
Maybe you are looking for
-
HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. up
-
I have done some tests. If I fill the array with some fixed value, the return array is always right. I have the feeling that the problem is with the input data function. >Hi, >I have a LabVIEW applicaiton that calls a DLL library. I wrote this DLL
-
Problem accessing Sql server Procedure from Crystal with JDBC driver
I have some Crystal reports using SQL Server procedures, most of them are working very well; however, I have 2 that have problems accessing sql server procedures. These reports are working using OLE DB connection without problem, but when I try to re
-
Is there a way to pass an array or structure for example as parameters, in addition to a query, or multiple queries to the Report Builder in CF8? I believe this was recommended by users to be in CF8.
-
How do I get out of editing? I crop and size a photo and it has a belt around it saying it is still being edited. I need help.