How do you boot a Mac Pro hardrive as an external drive on an iMac?

Hi All,
I hope you can help me.
I have a Mac Book Pro. The mother board has died but the hard drive is still working fine according to the technicians.
I decided not to repair the Mac Book Pro as its quite old and I wanted a bigger screen so I got a new iMac.
The problem is when the Mac Book Pro died there were two files on the desktop that I had not backed up.
I know its not a massive problem. But my curiosity has made me wonder if it is possible to plug the Mac Book Pro into the iMac and boot the Mac Book Pro's hard disk as an external disk on the iMac so I can recover the files.
I'm sure it must be possible. But how?
Any ideas?
Thanks in advance.
Gem

From what you have said about the disk drive coming from an older Mac, my initial response is no. The odds are that the version of OS X and the drivers on the disk drive from the old MBP will not be able boot the new iMac.
But do you really need to boot from the old disk drive or just gather the data from it?
If all you need is the data that should be doable by putting the disk drive in an external enclosure and connecting it to the iMac.

Similar Messages

  • Can you boot a Mac Pro using a USB Pen Drive?

    Hello.
    Can you boot a Mac Pro using a USB Pen Drive? OS=Windows or Linux or BSD or MacOS... I know it is bios specific on a PC if the option is available. If this is possible, does anyone have a link to instructions?
    Thanks,
    Scott

    Not to get in to an argument over semantics here, but by saying "Windows should boot if you have installed the requisite Boot Camp drivers," you are implying "that the Boot Camp drivers [are] needed for Windows to boot." I was just clarifying your post so people didn't get confused.
    As for booting a Mac Pro off a USB flash drive, if you have been successful in doing so, can you share with me your method? I've tried booting of an OCZ Rally2 4GB flash drive and it's never worked on my Mac Pro. It doesn't show up when I hold option down and if I try to boot through rEFIt, I get an error about my Mac's firmware not supporting USB booting (I have the latest firmware installed, too). I've tried GPT and MBR partitions, both to no avail. Booting off USB hard disk drives is no problem though. And I can boot off this flash drive on a Core Duo iMac.
    Any ideas?

  • I am a brand new mac user...trying to figure out how to switch from the Mac Pro screen to my external monitor.  Appreciate any help.

    am a brand new mac user...trying to figure out how to switch from the Mac Pro screen to my external monitor.  Appreciate any help.  thanks

    In Finder... goto Help... In the Search Window type in Displays...
    Lots of Useful Information there...
    You may find these Links Useful too:
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/macbookpro/
    Cheers,

  • How do you import photos from a library on an external drive to the current library running in iPhoto?

    How do you import photos from a library on an external drive to the current library running in iPhoto? I have a few different pictures in each library and would like to have all my pictures in both libraries. The library on the external drive is my backup. I would appreciate any help.

    Depends on exactly what you want to do.
    Just move some of the Photos? FIle -> Export from one and export the shots to the Finder. Then import them to the other.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.
    Move the photos and all versions and metadata: use iPhoto Library Manager it's the only way to do this while preserving everything. Merge two Libraries into one?
    If you have Aperture 3.3 or later and iPhoto 9.3 or later you can merge libraries with Aperture.
    Otherwise the only way to merge Libraries is with the paid ($20) version of iPhoto Library Manager

  • How can you back up files that are on an external drive?

    How can you back up files that are on an external drive?

    hw999 wrote:
    How can you back up files that are on an external drive?
    Easy way, CLONE IT to another HD
    HD cloning software options:
    1. SuperDuper HD cloning software APP (free)
    2. Carbon Copy Cloner APP (will copy the recovery partition as well)
    3. Disk utility HD bootable clone.
    Methodology to protect your data. Backups vs. Archives. Long-term data protection
    https://discussions.apple.com/docs/DOC-6031
    hw999 wrote:But all I want to do is include the data that I store on an (second) external drive (internal drive getting too full) part of the auto back up process using timemachine.
    BAD IDEA
    You want one backup (ie Time machine) and one (or more) data archive of just all your raw files (drag and drop, or cloned etc.)

  • Mac Pro freezes when using external drives

    I have a 2009 imac 27 and a macbook pro. I do a lot of design work so I have started saving all my work to a time capusle with both computers linked up to it. This has been fine for all software used, final cut, adobe cs5 master collection, cinema 4d etc.
    My problem started when I got a mac pro. If I try to save directly to the time capsule I get the coloured "wheel of wait" and the software, eg illustrator shows 100% cpu usage and never drops back down. Eventually I can't do a thing.
    I installed cs6 onto the macbook pro and got the same thing.
    But, I also have the same problem if I try to put files on a usb stick from the mac pro, Finder goes to 100% cpu and stops responding or transfer stops about 8mb in and doesn't go any further and I cant stop the transferto  try again. It's there until I reboot. Sometimes it locks up the whole system.

    The Time Capsule is a horrible place to routinely save your files. Its drive is pathetic -- suitable only for backups, and the connection to it using USB2 is horribly slow.
    You have a Mac Pro now. Put another "real" drive in a bay there, and enable File Sharing. Save your files there. (Gigabit Ethernet with Jumbo frames recommended.)
    As long as you have an Apple Base Station hosting your network, you can even allow the Mac Pro to sleep and use "Wake on Demand" to wake it for Sharing.

  • I cannot empty trash on my Mac Pro when I have external drives attached

    I try emptying trash and get the message, "Operation can't be completed because you don't have permission to access some of the items."  When I remove the external flash drives, the trash is empty.  As soon as I reconnect the drives, same message occurs when I try to empty the trash.  Help!

    Every file and folder in Mac OS X has some permission settings to help define what you or other users can do with the file or folder, for example whether you may modify it or not. If see an alert box with a message that says you do not have "sufficient" privilege or permission, see the tips in the "Emptying the Trash" section ofthis article.

  • My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

    My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

    If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
    Or you could move them to the internal drive and double-click on them once the move is completed.
    To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

  • How can you prevent the mac book pro from unexpectedly shutting off and beeping three times repeatedly?

    How can you prevent the mac book pro from unexpectedly shutting off and beeping three times repeatedly?

    The three beeps are an indication of a hardware problem. Power On Self-Test Beep Definition - Part 2 - Apple Support

  • How do you boot an iMac with an external hardrive?

    How do you boot an iMac using an external hard drive?

    hold the Option key at startup to invoke the Startup Manager and select you external hard drive to boot from.

  • How can I upgrade my Mac Pro

    Hello,
    I have a Mac Pro. Here are the specs :
    Mac OS X 10.5.8
    MacPro1,1
    NVIDIA GeForce 7300 GT
    When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
    OpenCL
    requires one of the following graphics cards or graphics processors:
    NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
    ATI Radeon 4850, Radeon 4870
    Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
    Thank you for any help and/or information !

    Dalfe wrote:
    Hello,
    I have a Mac Pro. Here are the specs :
    Mac OS X 10.5.8
    MacPro1,1
    NVIDIA GeForce 7300 GT
    When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
    OpenCL
    requires one of the following graphics cards or graphics processors:
    NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
    ATI Radeon 4850, Radeon 4870
    Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
    Thank you for any help and/or information !
    It's been a while since I've used it but I installed Snow Leopard on my old Mac Pro 1,1 with the 7300GT and it worked. OpenCL may not have but the rest of it did. I don't think what you've quoted says you can't upgrade but only that an upgrade won't deliver all of the features in Snow Leopard. Indeed, I was able to move the HD in the 1,1 Mac Pro into the 5,1 Mac Pro, boot from it (10.6.4 is the minimum the 2010 Mac Pro will boot with), clone it and then updated it.

  • How do I set up an internal drive in my Mac pro as a mountable network drive

    Hi! I basically would like to know how to use one of the internal hard drives in my Mac pro as a mountable network drive to enable me to do full time machine backup and restores for my MacBook pro. Thanks in advance for the help!

    If it's just for you, you can access and or all of your Mac Pro drives from your MBP just by logging onto the Mac Pro using the Mac Pro name and password. This is a very bad idea unless you are in a trusted environment but if you're on a home network and you trust yourself, it really works.
    I've been using this technique for years on a gigabit LAN in my home. It also works logging on the other or both ways. Just pay attention to things like re-boots and shut-downs.

  • How to delete applications from mac pro?

    I think many people struggling at "How to delete appalications from Mac pro ,just because you made some mistakes or curious !" I know it is a bit difficut for people who are new users for the Mac .
    If you really don't want them ,you can delete them easily,
    As all you know after you download appalications from anywhere  ,it could be from apple app store or from other websites. They all can be disspeared if you don't like them .
    First , If you installed from apple app store  it will be really easily  just click at the app on the launchpad, after few seconds all the apps will be all shaking like leaves ,yes they are scared .(No No  don't delete me  I am helpful !) Ok yes  that is a little joke ! so what you can see now there is a small "x" at the top right corner .Can you see them ? just click the "x" And they will gone .
    Second step. This is only for you downoaded from other websites , In that case  , you just skip first step come to here  in order to save you some golden time .
    You can delete them from the launchpad , I have tried many times . i tried to drug them in the the trash . But after them all jump back to where they are , So you need to open the Finder ---> click the download -----> find the file which is belong to the app (make sure ) ------->click it  -----> drug it into the trash. then you can hear a little sound like you through it into the bin. it is really humanny  isn't it ? then go back to the finder again .---->click the application -------> find the icon on there which is you just drag into the trash.  do it again . take this one into the trash as well  then you will find the icon on the launchpad is disppeared . at the end don't forget to empty your trash   After that all job done , it is been deleted  ,
    Well done !
    Hope this could help all of your!
    Thanks for reading !

    Your profile shows Macbook Pro yet your topic confirms you are talking about a Mac Pro - or

  • Hello - how do i get my mac pro to print in colour

    Hello - how do i get my mac pro to print in colour - i am using HP Envy 120 and can not print in colour. when testing the printer, the printer prints in colour, but trying to print from the mac book pro - it prints in black and white. i can't find an option that

    I know nothing about your printer. However, to use it properly you must Add the printer in Print & Scan preferences.
    See OS X Mavericks- Set up a printer. Also, consult the printer's user manual. With the proper setup the printer should print color or b/w automatically. If you have further problems you need to start with the printer HP's tech support.

  • How do you setup a Mac Mini Server online? eg: no linked screen

    I was told in a Mac Store you can set up a Mac Mini Server online. So no need to have a screen connected.
    There's nothing in the paperwork that comes with it to say how to do so if you can. I have an iMac setup right next to it for going online or screen sharing etc.
    Have I been misinformed or am I just being slow?!
    Thanks in advance
    Mark

    Mark-THP wrote:
    Bit late now as I have the screen, but out of interest how do you boot in FireWire Target Disk Mode with no screen?
    Thanks
    Second Mac is running 10.6.8 though.
    You would have to plug a keyboard in to the Mac mini but would not need to connect a mouse or screen. You then hold down Command-T on the keyboard after turning the Mac mini on and before it boots. Keep those keys held down for about 10 seconds - that should be long enough. If you had a screen connected you would then be seeing the special FireWire symbol bouncing around the screen. This means the Mac is in FireWire Target Disk mode and is effectively a glorified external hard disk.
    The fact the second Mac is itself running 10.6.8 is not important. As long as it can boot in to Lion it will be able to boot from the Mac mini which is acting as an external hard disk. On this second Mac you would plug a FireWire cable from the Mac mini. Then you would hold down the Option key and start the second Mac up. After a few seconds you should see it is in a new different mode which should list all the different bootable disks it can find, including the Mac mini which remember is acting as an external hard disk. You would then select the Mac mini disk to boot from.

Maybe you are looking for

  • BB Flip External Display Caller Notification Issue

    Hello- I have owned this phone for approximately two weeks; and until today it was working perfectly. As of today the external display is no longer working for "caller ID" or incoming call notification. The temporary fix was to disable the "auto answ

  • Why does chrome have trouble linking to wifi so often?

    I leave at night and the computer is working.  I return in the morning and Chrome says it cannot link to the internet?  I restart the computer, turn on and off the wifi, exit and restart Chrome.  This happens several times a week and the PC's at the

  • Oracle9i JDeveloper version 9.0.3.3

    If you downloaded JDeveloper 9.0.3.3 from OTN, please check that you have the correct version. You should have build 1205. We've recently discovered that, for a brief time, an earlier build of 9.0.3.3 (build 1191) was posted on OTN. To verify that yo

  • HT3702 How to redeem a credit card gift card

    How do you redeem a credit card gift card

  • Attendant Console for CUCM 8 and above, My Solution.

    I work for a community college in which we employ a full time operator and have several people to fill in for breaks and vacations. Having an attendant console is very important. To complicate matters, we need to have more that the corperate director