How do you properly eport anamorphic 16:9

I have a canon gl2 and I can capture anamorphic 16:9 fine but whenever I export it doesen't seem to do it properly. It is as if the video is 16:9 but it letterboxed at the sides. Any advice?

If you work in sd anamorphic and export as per sequence settings you will see a 4:3 frame (the 16:9 anamorphic frame). That's how anamorphic is supposed to work. Anamorphic (in the sd video world) means 16:9 stored in a 4:3 frame and then 'morphed' to the correct aspect ratio on display. This aspect ratio adjustment usually takes place in either the dvd player or satellite/cable decoder if you have a 4:3 tv. If you have a 16:9 tv then the tv takes care of it.
If you're burning a dvd you just have to make sure that you flag the movie as anamorphic in dvdsp and you'll get a properly encoded anamorphic dvd.
If you want to export for web/computer use you need to use qt conversion or compressor to turn your anamorphic movie into a 16:9 one via the frame size settings.

Similar Messages

How do you properly disconnect a vga monitor?

I use a vga monitor at work about 2 to 3 times a week. I have a MBP 13, 2011. I use it for powerpoint presentations.
I was wondering how do you properly disconnect it once I'm done?
I normally close out the application; turn off VGA, and then just disconnect.
I feel like this may not be the proper way to do this. I've looked for some sort of eject, but haven't found anything.
Any feedback would be greatly appreciated.

If you are switching between a monitor and a projector and the display resolutions are not the same as the MBP's then you should turn off the computer as well. I have found when using a projector that things tend to work best if the computer's display resolution is set to the resolution of the projector. It may not turn out to be necessary, but keep it in mind.

How do you properly take care of your ipod touch?

I am currently waiting for the new iPod Touch 5th Generation (which I ordered on the 20th, and am anxiously waiting for it to arrive - When will it arrive?) an have no idea on how to take care of it. I'm new to Apple products so how can you take proper care for it?

This previous discussion should provide some insite.
https://discussions.apple.com/thread/4384899?tstart=0

How do you properly switch off music?

I posted the following in the connecting forum but should have probably posted this here:
Usually when I'm finished listening to my music I use the remote and press the middle button once and it stops the music play and the iPod goes to sleep. Occassionally I'll notice that the player is on when I'm sitting at my desk. Is this the proper way to stop the music player and letting the iPod to sleep. I really don't want to do a full shut down and restart as I listen to it in shuffle mode and like to pick up where I left off. I just want to make sure I'm turning it off properly.

This is a hardware issue. It is likely that you will need to have it replaced.
See these threads for more details:
http://discussions.apple.com/message.jspa?messageID=10396611#10396611
http://discussions.apple.com/message.jspa?messageID=10371519#10371519
-Matt

How do you properly shutdown the OLite MA server?

Does anyone know the "proper" shutdown command for the OLite 10g Mobile Admin [Java] server? By "proper", I mean something other than Cntrl-Break when the DOS box has focus. I have not been able to find anything in the documentation on it, only the startup command. I would have thought there would be a rather obvious "Shutdown MA Server" option on the browser admin ui....
TIA,
Scott

My classpath is
C:\>set classpath
CLASSPATH=D:\oracle\sdk\MOBILE\CLASSES\OLITE40.JAR;D:\oracle\ora92\MOBILE\CLASSES\OLITE40.JAR;D:\oracle\ora92\Mobile\CLASSES\AQLite.jar;D:\oracle\ora92\Mobile\CLASSES\AQOracle.jar;D:\oracle\ora92\Mobile\CLASSES\AQCommon.jar;D:\oracle\ora92\Mobile\Server\bin\webtogo.jar;
But seems it is not matter. Class com/evermind/server/OC4JServer is included to oc4j.jar and we have added it in paramters -Djava.class.path=oc4j.jar
Well, check in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ {SERVICE_NAME}\Parameters
1) "Current Directory" should be like D:\oracle\ora92\mobile_oc4j\j2ee\home\
2) "JVM Library" should point on something like C:\j2sdk1.4.2_04\jre\bin\server\jvm.dll
3) finally "JVM Option Number 0" should be -Djava.class.path=oc4j.jar
You can also try to execute service using yours login.

How do you properly tag linked images when importing XML content?

I'm importing content from an Access database into ID CS2 using XML. So far so good with the text and numbers--I'm having difficulty with the graphics, though. There's an image associated with each record and I want InDesign to place the appropriate image in a placeholder frame.
Right now I have a field in the database which contains the relative path to the image file for each record, but when I import the XML into ID, the link is displayed as text in the graphics frame.
How do I solve this?
Thanks.

Hi,
Give the path to the image as an attribute href.
example:
<image href="../my/path/to/the/image.jpg"> (if the path is relative to the indesign-file)
or
<image href="C:/my/path/to/the/image.jpg">
Greetz,
Glen

How do you PROPERLY clean a DV7-1025NR cooling system?

I use a program called "Speccy" from Piriform and it is showing a temperature of 149 degrees on my video card (GeForce 9600M GT) and a temperature of 105 degrees on my CPU (Intel Mobile Core 2 Duo P8400). I don't know if these are high or not, but I have had this computer for quite some time and I know that to keep it in good shape it needs cleaning. My fan is not making any noise and I assume thats a good thing. I would like a printable list of specific (very specific) instructions or even better a video on how to accomplish this task. I am comfortable with the idea of disassembling my computer if I know WHAT and HOW to do it.

Quote from: HU16E on 15-September-10, 17:08:43
Well, for comparison purposes, our rigs seem to differ as to voltages. This was achieved on Auto (default) CPU V. setting. QPI V. sits at 1.20V's. Your CPU must have a slightly higher VID. As for CPU core temps, that isn't going to be much of a good comparison either (Zalman 9900 on the CPU), as my side cover which has a fan is off & currently using a 10" table fan since I'm doing so much part swapping & testing, & the room temp is only 19C, & the highest load temp on any of the cores I recorded was only 68C. At least the new beta bios cured the CPU Multi saving, but it did'nt fix the Cell Menu 'Read Only'. Still reads 4000 160X25.
Well I can boot up with those voltages as well, but when I go to run Prime95 it BSODs or just freezes. I am running my memory at 1600MHz as advertised for the memory. I will try out the CPU-Z H/W Monitor... (assuming it is different then just typical cpu-z)

How do you properly propagate permissions on an xserv 10.6.8?

I finished setting up my school computer lab with xserv 10.6.8. The client macs were logging in to the servers into their groups, all sharepoints were fine except that the users weren't able to save anything to tthe server, getting an error saying that the client didn't have permissions to see administrator. So I used Server admin, selected both hard drives and propagated permissions to all the items in each drive. I checked every box on the dialog I got when I selected propagate. I don't know if I shouldn't done that, probably not, in any case, after I did that the clients were able to save their files to the server. Now the server will not boot, and stays on the grey apple logo with the spinning gear. I was so happy and excited I was able to set it up until this happened. I booted from an external drive and ran DiskWarrior but it didn't do much, I also ran Disk First Aid and it said it repaired the disk =, then I ran the repair permissions on both drives. I hope it works when I go back to school Monday. This mess was as a result of clients not being able to save anything to the server, so I thought it was a permissions issue. Any help or assistance on this matter will be deeply appreciated.

What OS are you running? If 10.7 or later, Rosetta isn't an option.
Look on the Snow Leopard DVD, Rosetta was an optional install.

How do you properly seat an SFP adapter?

Sorry for such a noob question but I would love for someone to clarify...
On a fiber LC SFP adapter, there's a small arm on a hinge that turns up and down, what is that for? Are you supposed to have it in the down position, plug in the adapter then pull the arm up? Or is the arm only there to help you grip onto something to pull it out? Thanks!

To add Jon's post, it all depends on the model of your switch and the manufacturer of the SFP.
Traditionally, it doesn't matter if the arm is down or up. You insert the SFP and you are SUPPOSE TO HEAR a very soft "click", which means the lock (or claws) has engaged the slot of the port.
Now I have noticed that legacy 2960/2960G, 3560/3560G, 3750/3750G do not play right. Whether you insert the SFP with the arm down or the arm up you will seldom hear the "click". The only way to fully determine if the lock has "bitten" to the slot is to (arm up) is to pull the SFP.
Just want to warn you about SFP with a plastic arm. Just try not to use it. The plastic arms become very brittle after prolong use. When you want to remove the SFP, those plastic arms will break off and leaving your SFP stuck in the port. You'll need a small flathead s_crew driver to push the lock underneath the SFP FORWARD before you can pull the SFP out.
As of lately I have RMA-ed these infernal and confounded plastic arm SFP in excess of 80 pieces (used or even brand new). No need to worry about the new DOM ones. They come in with metal arm but the very minute I catch these SFP with plastic arms ...

Going crazy here!!! how do you properly set up ISP email on o2 (UK) !!!

2 days now and email won't send!! It can be received but not sent.
I'm using my ISP email on my new 3G iphone - i've just read that the OUTGOING mail host needs to be o2 and i have put in the o2 details.....
OUTGOING – Host Name: mail.o2.co.uk
OUTGOING – User Name: [email protected]
OUTGOING – Password: your o2 password
BUT still no joy - emails just do not send!! When i create an email and hit send it just says 'connecting' at the bottom of the screen (and we have 2 iphones in the house and this is the case with BOTH of them).
can anyone please help?
Message was edited by: Florence

actually the test message i am sending is to my other fast.co.uk email account! I definitely know it's a working and valid account - though i'll try one to myself as well
EDIT - actually - i just created the email account yet again on the iphone and POP account verification failed - i am entering these details:
Settings > Mail > Add account > Other
IMAP/POP/Exchange: POP
Name: (anything you want)
Address: [email protected]
Description: (or anything you want)
Incoming – Host Name: mail.gofast.co.uk
Incoming – User Name: (gofast username )
Incoming – Password:( gofast password )
Outgoing – Host Name: smtp.o2.co.uk
Outgoing – User Name: [email protected]
Outgoing – Password: your o2 password
Save
Do you want to try setting up the account without SSL: Yes
If Advanced setting are needed…
Incoming – Use SSL: Off
Incoming – Authentication: MD5 Challenge-Response
Incoming – Delete from server: Never
Incoming – Server Port: 110
Outgoing – Use SSL: Off
Outgoing – Authentication: Password
Outgoing – 25
i don't get a chance to do any advanced settings beacause the creation of the account fails because validation fails

How do you properly get music from another person's itunes account?

Me and myt friend both have the same type of ipod and dhe was on my computer with my ipod plugged in and on her itunes account trying to give me her music but it didn't work. What did we do wrong?

Post in the iTunes forum area for instructions.

How do you properly set up a home network with multiple devices? I have a macbook pro, an iMac, and several other phones, tablets, roku devices, etc. Everything works properly except for when I try to access the other computer through the network.

I have an iMac and a macbook pro that I used to be able to share files between but ever since I moved 3 months ago I can't get it to work. Also, now my phone and my wife's phone are inseparably connected. She seems to be getting all of my text messages but I don't get hers. We also bought new computers right before we moved so that might have something to do with it. Both computers are on my account and have my name. Thanks in advance, it would be nice to get this working again - tired of walking ten feet with a flash drive to share files : )

The following may help with the file sharing issues: OS X Mavericks: Share your files

How do you " properly " reply to Apple support once they've contacted you?

This sounds very minuscule ( I KNOW) , but I am pretty sure I am doing this correctly. I am having some issues with my iTunes and need tech support. I've emailed them and got a response from tech very swiftly, asking for specific information and screen shots. I did this...to respond, I just click on reply ( in my email account ; yahoo) and then continue inserting required info.
Now...l I've sent the response , only to get back a day later, an email stating pretty much this :
'Your message has been enqueued and undeliverable for 1 day'
to the following recipients:
Recipient address: [email protected]
Original address: [email protected]
Reason: unable to deliver this message after 1 day
Am I doing something wrong ?? Because I also received a 'follow up' email from support asking for the information they specified the first time they responded. Am I not doing something right here?
This is the other information from the email :
Sat, 27 Apr 2013 00:43:08 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Sat, 27 Apr 2013 00:24:01 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Sat, 27 Apr 2013 00:05:16 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 23:46:32 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 23:27:42 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 23:08:48 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 22:50:11 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 22:31:42 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 22:13:25 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 21:55:07 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 21:36:42 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 21:18:29 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 21:00:14 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 20:42:18 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 20:24:41 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 20:06:55 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 19:49:15 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 19:31:50 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 19:14:24 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
The mail system will continue to try to deliver your message
for an additional 6 days.
Again, please help?

Contact Apple
http://www.apple.com/support/contact/
ApplCare: 1-800-275-2273

How do you properly set the RAM timings?

In an effort to solve random crashes on my pc I adjusted the RAM timings. I managed to stop the crashes, but I really didn't know what I was doing.
Recently I was playing with the cpu overclock options and I started crashing again, even after I was back to normal cpu settings. I managed to get it running stable again by adjusting the RAM timings, but again it was by trial and error.
I have read a lot of forums where people who have upgraded to a GF4 on several different systems have been plagued with crashes similar to mine. Is it possible that something is out of sync between the video, cpu, and ram? Is there anything that can be adjusted on the video card? Just a thought.
Any help would be appreciated.
System specs.....
AMD 1800+
MSI KT3 mobo
Visiontek GF4 Ti4600
SB Live
Liteon CD/DVD
Samsung PC2700, 512mb
40 gig hd
350 watt Enermax psu(This is new, replaced a 300watt generic because I thought it was the problem.)

bios set uplink
ram timming articlelink

How do you properly create a button in a scrolling frame?

I am having trouble getting buttons in a scrolling frame to work correctly. Here is what I have set-up. I have a multi-state object on the right side of the page. On the left, I have a text box with inline buttons inside of a content frame which is set to Pan Only. The inline buttons are set to Go To State in the multi-state object on click. When I preview the document in the Adobe Content Viewer, the scrolling works, but tapping on the buttons only brings up the navigation bars at the top and bottom. When I go back to my document, I notice that the buttons no longer have my settings to display the multi-state object (on click). Thanks for any help!

In scrollable frames, only URL-based buttons are currently supported. Buttons that jump to a slideshow are not yet supported. If all goes according to plan, the next release of tools will allow buttons in scrollable frames to jump to slideshow states.

How do you properly eport anamorphic 16:9

Similar Messages

Maybe you are looking for