How do you set an Auto Global Filter

I have a client who has set a Global Filter within his report.  The filter works fine.  However, if his query or request changes to include a new field, he has to manually include new field to the Global Filter.  Is there away to automate this process?  Is there a way to refresh the filter to include the new field?
This issue was sent to SAP-BO but was never resolved.
Thanks.

Hello Ty,
If, in deski, you create a filter (global or not) and just select manually the values you want to include in your filter that filter is static. Meaning that those selected values will not change when the query or request changes.
If you want a more dynamic filter then you can use the 'Define' button within the format of filters. This option gives you the ability to define a formula (boolean) which selects the filter values. Now whenever the query is changed as long as the values match the condition in the formula the values will be shown.
Regards,
Harry

Similar Messages

  • How do you set up your spam filter?

    Greetings,
    I have been fiddling with my spam filter for some time now and I still can't get it to work really good. I use the normal "Exempt if sender is in addressbook & Sender is in previous recipient but NOT "using my full name" because that seems to put everything in spam. I use the toggle "IF ALL CONDITIONS ARE MET". I also add the line "if message is junk mail" then move to trash.
    The above does work but not real great.
    Furthermore, I made up some more rules such as subject lines contain doctor etc and they work better.
    Can someone post what they do in their basic junk mail filtering and custom rules to help me out? Also, when a piece of junk mail ends up by mistake in the junkmail box I click "not junkmail". This never returns the mail to the correct box and just sits there and I have to manually drag it. Is this correct?
    //Cheers

    Hello Julie.
    Your junk filter appears to not be working properly. Try this first:
    1. Go to Preferences > Junk Mail and disable junk mail filtering.
    2. Quit Mail, then open it again.
    3. Go to Preferences > Junk Mail, enable junk mail filtering, and configure it however you wish -- I recommend you to leave it at the default Automatic settings.
    4. Reset the junk filter database (Preferences > Junk Mail > Reset).

  • How can I set up auto respond for email

    How can I set up auto respond for email?

    Hey there jimmac169,
    It sounds like you want to have the Mail app automatically reply to emails that come in. You can do this in the app itself, but in order for the function to work, Mail needs to be open. Take a look at this info from the following article:
    Mail (Yosemite): Reply to, forward, or redirect messages
    Automatically reply to or forward messages
    Mail must be open before it can automatically forward or reply to messages. If you want to send automatic replies when Mail isn’t open—like when you’re on vacation—check with the provider of your email account. 
    Choose Mail > Preferences, then click Rules.
    Click Add Rule, then type a name for the rule.
    Indicate whether any or all of the conditions must be true for the rule to be applied.
    Set the conditions that determine which messages to automatically reply to or forward.
    Choose options from the “Perform the following actions” pop-up menu.
    Forward messages: Choose Forward Message from the first pop-up menu, then enter the email addresses where you want to receive the forwarded messages. Click Message, then enter any text you want to include with the forwarded message. For example, you could explain that you’re automatically forwarding messages. 
    Reply to messages: Choose “Reply to Message” from the first pop-up menu, click “Reply message text,” then enter your reply. Mail includes the full text of the original message in your reply. 
    Click OK.
    Carefully consider the rules you create. If they’re too broad, messages can be sent inadvertently or create loops (replies to replies you sent). If possible, test the rules. 
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How do you set the amount of time the screen stays lite after your last use?

    How do you set the amount of time the screen stays lite after your last use?

    Settings>General>Auto-Lock.

  • How Do You Set Mail To 'Manual' ?

    Never had problem with iPhone until yesterday. I am not receiving 'push' e-mail anymore. I did not do any changes to the iPhone at all. Any e-mail now I have to go to inbox and click on the curved arrow symbol at bottom left of page in order to load the waiting e-mails. In a different posting someone mentioned to test 'push' function by setting e-mail to 'manual' and then sending your Yahoo account an e-mail from your computer (I assume using a different e-mail service). In the 'settings' menu for 'mail' I do not see where you set for 'manual'. How do you set mail to 'manual' setting? And do you think I should just RESET the iPhone (using the iPhone or hooking it up to iTunes on the computer to RESET) ?

    I have no other e-mail accounts set up. Anyway I did RESET my iPhone (using the RESET button on the iPhone) and all is well again (how long I do not know). My e-mails are being 'pushed' again so that I can see from the main menu the little red dots (with the numerals inside) showing how many e-mails are waiting for me. I love this feature. I had 'push' e-mail on my ex-Blackberry. BUT, I do not see the AUTO-CHECK anywhere. I am heading over to the Apple Techies at my local Apple store to ask them about this missing AUTO-CHECK. I have a feeling you need two account set up on your iPhone for this feature to appear. I could be wrong. Thanks, everybody........

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How do you set up Port Forwarding for ARD 2.2 in AEB N?

    Help,
    I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
    How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
    I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
    Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
    Any and All help will be greatly appreciated.
    P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
    Thanks,
    Jim

    Try the following for each AirPort Extreme ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 3283
    o Public TCP Port(s): 3283
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 3283
    o Private TCP Port(s): 3283
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5900
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5900
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5988
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5988
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

    How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

    To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
    http://lilybiri.posterous.com/question-question-slides-in-captivate
    http://lilybiri.posterous.com/question-question-slides-part-2
    Lilybiri

  • How do you Set up a Family Pack sub-account

    how do you Set up a Family Pack sub-account i have purchased a Family Pack account and enter the activation key and i can not find where to set up the sub-account.
    please help
    Denis

    Thanks Shepart
    when i activated the account i ticked the upgrade button, should i have ticked the new account button?
    anyway, when i do what you say (below) there is not a manage "Accounts button" so i went to reactive it again ( for a new account) and is says that the activation key is all ready in use.
    Denis, go to www.mac.com and sign into your account. Click on the word "Account" at the top of the left hand column. You will need to sign in again for security purposes. Once your account settings show up, click on the "Manage Accounts" button and you can take care of everything.
    i think i hit a brick wall !!
    Cheers
    Denis

  • How do you set up separate facetime accounts under one apple id

    how do you set up separate facetime accounts under one apple id

    This is possible, but I haven't found any official Apple topics about it, so I will share a nice web article about it on a Mac fan website:
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    Hope this helped!

  • How do you set up iphone 5? everytime i put it into the computer it erases all my contacts how do i stop this and get my contacts back?

    how do you set up a iphone 5 everytime i conect it to the computer it erases all my contacts how do i put them back on my phone and stop the computer erasing them again?

    Are your contacts not on your computer?

  • How do you set up two different ipads on one computer ?

    I purchased a new ipad for my wife and want to get her started but we both use one imac as our desktop system.  How do you set up two different uses on one computer.
    Thanks,
    Dave

    Other options not covered in the article:
    1) You can plug both in under the same computer username and same iTunes Apple ID and give each device it's own name. You should be able to manage them as separate devices with different media, apps and screen layouts. All of your media would be in a common pool, though.
    2) Under one computer username, you can login and logout of two different iTunes Apple IDs. This option is cleaner with two computer usernames but it can be done with one.

  • How do you set NLS_LANG environment variable in report builder

    How do you set up the reports builder environment to display foreign fonts.
    So far what I read makes me think that in report builder I have to set the NLS_LANG environment variable .
    If anyone has done this is that true and if so how.
    Also the languages I want to use are the following.
    Armenian
    Cambodian
    Chinese
    Russian
    Tagalog
    Vietnamese
    How do I find the NLS_LANG environment variables for these.
    Where I am at now+
    I have to set the DEVELOPER NLS LANG. I see the NLS LANG in the registry and I guess I have to add the DEVELOPER NLS LANG.
    Now I am searching for syntax. If anyone knows the syntax for those languages please let me know and how do I set more than 1 at a time.
    Howard
    Edited by: csphard on Apr 14, 2010 5:17 PM
    Edited by: csphard on Apr 14, 2010 5:22 PM
    Edited by: csphard on Apr 15, 2010 9:02 AM

    Hello Howard,
    Check out the following link here you can find your desired NLS parameters.
    http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
    And about the NLS_LANG for developer why you want to create for developer. Its is already there in REGISTRY. Just seaching in developer registry you can find there.
    how do I set more than 1 at a time.
    You can set only one NLS_LANG parameter at a time.
    -Ammad
    Edited by: Ammad Ahmed on Apr 15, 2010 8:52 PM

  • How do you set up a different ipad on same computer with different itunes library

    I am trying to update a clients ipad (who does not have access to internet at his residence) on my personal computer.  When I open up itunes with his apple ID, I continue to get my itunes library information.  I don't want to mix my information with his information.  How do you set up a different i pad/itunes on the same computer?  What I need to do is update the version of his i pad as his i pad is version 4.2.1.  Thank you

    Create a new Windows user account on the computer.
    (86398)

  • How to you set up a POP email account on iPhone 5S?

    How do you set up a POP emial account on iPhone 5S.  It only gives me an option for IMAP and I need POP
    THANKS

    Turn it on airplane mode.  Then set up you new account with all of your credentials.  Save, once it allows it.  Turn Airplane mode off, and then go back and select POP.

Maybe you are looking for