How do you set up multiple time capsules in my home?

I have one time capsule for my information and my roommate has another.  They are in the same room.  How do I set them up so our information doesn't get confused?

I doubt you will have confusion.. if they have different names.. then network wise they will be fine.
ie You set up your TC named TCTom / TCJulia.. and the other person has his/her TCHarry / TCHarriet.. then clearly they are different..
You can have wireless issues though. If they connect via the same network.. then use ethernet and turn off wireless. Or make a pact and share wireless on one. ie the TC can be plugged into each other.. but wireless only working on one.. they will both be equally accessible and work equally well.

Similar Messages

  • HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

    how do you set the airport time capsule as the primary base station rather than as a network client?

    The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
    So, the first logical question here would be......
    What is the make and model number of the device that you call your "modem"?

  • How best to set up multiple time capsules for multiple needs?

    There is so much good information on these discussions about using TCs for extenders or external drives - I am hoping to do both so will ask my own question here. BTW, this is my very first post so please be patient with me if I do not include something important.
    I have a 1/2 gen (2007) Airport extreme and a 5th gen (2011) 2 tb TC. I am buying a 6th gen (2013) 3 tb TC because I am getting the new Macbook Air and want to take advantage of the new ac wireless. I have 2 apple TVs and 1 iMac plugged directly into my home ethernet network (if I'm saying that right - they are plugged into the wall). We have iphones, ipads, and an old macbook as well that all plug in wirelessly. Below is what (I think) I would like to do in the order I think I would have to do it. Could you help me understand if (a) this makes sense, and (b) if so, how do I accomplish these steps?
    1. I unplug the 2 old units (2007 and 2011) and set them aside for the moment.
    2. I plug in the new 6th gen TC to my modem and follow set up instructions to make it my backup area for iMac, Air, and old Macbook. I assume I need to do this because I want it to be the primary right?
    3. I want to use the 2011 TC as a hard drive - I will be transferring all photos and 2 iTunes libraries (mine and my husband's) to it. We watch lots of movies so that is the main use. I think I would want this plugged directly into an ethernet port in the wall so it will be quickest for Apple TVs to access right? Or would it be better (fastest access) to connect it directly to the new TC or even the iMac? Is there something I need to do to make it an external drive rather than TC?
    4. I would also, if possible, like to use the 2011 TC as an extender into a far room in the house. Could I simply plug it into an ethernet port in that room and it magically becomes an extender too? Would this not be ideal for some reason, like it is slower to access? Note that this is not terribly necessary but would be nice if easy.
    6. Would it make sense for me to plug in the 2007 unit in a far room upstairs to serve as an extender up there?
    Thank you so very much in advance.

    There are a few things to get straight..
    This is pedantic but heck I post too much..
    The Gen of the TC is one behind the Extreme.. so a Gen6 AE = Gen5 TC.
    Totally pedantic.. but it keeps me happy.
    3. I want to use the 2011 TC as a hard drive - I will be transferring all photos and 2 iTunes libraries (mine and my husband's) to it. We watch lots of movies so that is the main use.
    I would like you to rethink this.
    You can do it.. but I think you are misunderstanding how iphoto and itunes work.
    Your Apple TV never connects to the library of itunes..
    And
    Your TC is not a media player.
    So all files stored on a TC are going to flow like this..
    TC(ituneslibrary)---Computer (itunes)---stream---TC(network)----ATV.
    If you remove the computer.. then you have nothing.
    The TC is not a great place to store the itunes library for the following reasons.
    It is slow.. much slower than local hard disk.
    It is slow to spin up .. causing itunes issues with losing the library.
    It is fast to spin down.. so streams get lost.
    It has no backup.. and Time Machine cannot backup network drives. That means one day you will wake up.. TC will be dead.. (they do not last forever so this is 100% certain to happen).. And your library is gone. Apple offer no recovery service.. and it costs a small fortune to recover files.. without any guarantee of success.
    iphoto is even worse.. it is strongly recommended NOT TO USE NETWORK to locate the iphoto library. It corrupts easily and a small corruption makes the entire library unreadible.
    Since you have imac it is better to use an external drive for libraries.. use the fastest port available and you can afford.. ie Thunderbolt>USB3>FW800>USB2
    Only the very latest Macs have USB3 but it kills the earlier USB2 and Firewire. And for many people will be as fast as Thunderbolt which is the tops but uber expensive.
    Then the TC serves its correct function as TM backup.
    You can share this hard disk to the network if you want other computers to access it.
    You can store multiple iphoto or itunes libraries on it.
    Follow the specific instructions about sharing your itunes library.
    http://support.apple.com/kb/ht2688
    http://www.apple.com/au/support/itunes/library/
    And your iphoto
    http://support.apple.com/kb/HT1198
    Most of the rest is fine..
    1. Yes.
    2. Yes.
    4. Yes you can extend with the old TC. Ethernet would be better. You might be mixing up wireless extend with Roaming.. you can use roaming if you have ethernet already available.
    http://support.apple.com/kb/ht4260
    6. Yes.. you can use a number of units via ethernet as AP points.
    5. For another life??

  • How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

    Are you using a v6 uitlity.. because it is a toy.. ??
    Get v5 utility and then you can hold down the option key and select the right mode.
    If you have lion, just install it.. For ML follow this.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated  you are using Lion.
    1. Did you download and install the 5.6 utility..?
    I said to do it.. you never said yes.. I did that.
    Please do it. .. you will get no place before you do.
    2. Did you bridge the TC.. ?
    If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
    3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

  • How do I set up the Time Capsule without an internet connection

    How do I set up the Time Capsule as a wireless hard drive without an internet connection.   I am in a office situation in which I cannot access my work network.  I need to be able to share files on the Time Capsule over the wire connection.

    Are you using a v6 uitlity.. because it is a toy.. ??
    Get v5 utility and then you can hold down the option key and select the right mode.
    If you have lion, just install it.. For ML follow this.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How do I set up my Time Capsule as backup HD only.

    How do I set up my Time Capsule to act as back up external Hard Drive only?  When I connect to my current network it slows down transfers between my 3 HD Tivos set up on my network to a crawl!  I don't want it connected to my network!

    Bridge the TC.
    First of all download and use the real utility if you haven't already. http://support.apple.com/kb/DL1482
    Open utility.. go to manual setup..
    In the TC setup go to internet tab..
    Down the page find connection sharing.
    Select off bridge mode.
    Update the TC.
    The TC now is a client in the network and will act as a HDD.
    Wireless is up to you.. but it should not slow the connection. Certainly you can turn it off completely.

  • I changed my ISP, how I can Setting up my Time Capsule ?

    Recently, I changed my ISP, how I can Setting up my Time Capsule again?

    Hello. I jus tbought mine and will be setting up shortly. So I am only guessing here, based on how my airport extreme base station acted when I switched once. When you connect the ethernet to it, it should simply find the signal,a nd prompt you for the password information that you set up with the new ISP.
    If not, please report back how it goes..

  • How do i set up my time capsule wifi for many users

    hello ..
    i have problem.. as always
    my time capsule is connected to dsl modem (off(bridge mode)), in modem we can get only 10 ip adresses and no more. so when there are 10 pc connected to our wifi, no more can connect.... how can i set up my time capsule, so more people can join our wifi...? is it even possible?
    P.S.
    1) to our wifi is connected printer, so everybody can print...
    2) every pc uses time capsule as bacup place in time machine.
    tnx

    You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
    Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
    Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
    (Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
    But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
    Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
    Then set DHCP for clients that will join.. this can then expand the scope of addresses..
    It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
    Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

  • How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

    How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

    To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
    http://lilybiri.posterous.com/question-question-slides-in-captivate
    http://lilybiri.posterous.com/question-question-slides-part-2
    Lilybiri

  • How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

    I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

    The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
    You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
    Is your broadband cable or adsl or fibre or ???
    If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
    Setup the TC in DHCP and NAT mode.. (depending on broadband type).
    You must reset the TC to factory to do the setup.. no files are lost at all.
    Here is my current recommended setup.. with Yosemite life has become harder than ever.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Here is why Yosemite has fundamental issues.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

    I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
    I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
    Thanks!

    The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
    The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
    If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

  • How do you set the Date & Time on Zen V Pl

    On the System menu I scroll down to Clock Settings. It gives me the options to view the?clock, put the?time in title, & the set the alarm. How do you?change the time & date?

    cwilliam4,
    Go to Extras -> Date and Time. Once you're inside, press and hold the Back button and you should have a list of additional options.
    Jason

  • How do you set the alert time to default to a set amount of time in the calendar?

    How do you set a default alert time in my calendar so I don't have to set it every time?

    Go iCal Preferences/General and click the default alert tick box at the bottom. You can then adjust the amount of minutes before the event for the alarm. NB. ticking the tickbox means you get an alarm for every entry.

  • Multiple Time Capsules on Wireless Home Network?

    I have a relatively new MacBook Pro and Time Capsule. Everyone was actually working well until my husband got the same type of computer and logged into our wireless network. Somehow, until he turned his computer off, I was unable to back up to my Time Capsule. All of my sharing is off. This is before he even connected his own Time Capsule to the home wireless network. The folks in the Apple store suggested that two Time Capsules could be on the same network with no problem. Any ideas?

    aussiegti wrote:
    Don't want to just connect an external drive into the USB port of the TC (on the belief that transfer speed will be slow).
    Are you sure that it will be slower? If you are using a wireless network to connect your machines to the Time Capsule, your bottleneck will be the wireless network, not the fact that the HDD will be connected by USB. Granted the external HDD may be slower than TC's internal HDD. I feel an additional HDD would be the most bang for your buck.

Maybe you are looking for