How do you structure a full flash website without the timeline?

Hello there. I was wondering how to build and structure a full flash website using the OOP approach. I have an idea of how to structure an application using the MVC design pattern, but I cannot put things together in order to structure a whole website.

I'm nowhere near an expert on this topic, and I suspect that the overall purpose of your site would help guide the best approach to designing and developing it without the timeline. I've done a lot of this with Flash for a limited purpose - creating a client clip that has only one frame, but responds to user events with dynamic behavior. My suggestion would be to take a look at some of the books that cover this topic to get a better idea of exactly how you'd like to deal with this project.
Two books are in my library that cover this topic - ActionScript 3.0 Design Patterns by Sanders & Cumaranatunge, published by O'Reilly & Associates, check it out at http://www.amazon.com/ActionScript-3-0-Design-Patterns-Programming/dp/0596528469/ref=sr_1_ 1?ie=UTF8&s=books&qid=1254149170&sr=8-1 as well as Advanced ActionScript 3 with Design Patterns by Lott and Patterson which can be found at http://www.amazon.com/Advanced-ActionScript-3-Design-Patterns/dp/0321426568/ref=sr_1_3?ie= UTF8&s=books&qid=1254149170&sr=8-3
Both books have a chapter on implementing an MVC design pattern with ActionScript and provide some basic examples you can build on. Sorry to be so meager in responding, I hope this might help a bit. Good luck!

Similar Messages

How do you perform a full system restore for the hp officejet 6500

Basically, after having this printer for 1 year, the wireless printing started to not work correctly. After buying a laptop and trying to configure the printer with it, the printer started to have problems with wireless printing. So how do you perform a FULL factory reset? I already tried hitting #9 while the printer was turning on but it only seemed to partially reset the system. It did not turn it back to the day i bought the printer.

OK, so it turns out it was the 'only show synced content' tick box.
Wow, how embarrassed do I feel now? I never even paid any attention to that tick box all these years.
Interestingly, over the last couple of days I had my ATV at v1.1 again, and happily deleted all my content (except for 1 album which I deliberately left on). A few days went past, and I checked daily - and there was only ever the 1 album.
I then upgraded to ATV v3.0.1 again today and that's when my problems came back - all my content magically reappeared on the Apple TV (or so I thought).
I'm thinking maybe that the 'only show synced content' is a recent 3.0 feature? And if so, maybe that's why I never noticed it before and that's why it was confusing me? Or maybe it's been there all these years (in which case I'll carry on being embarrassed).
Anyway, a huge thanks to everyone who responded.
Brad

How to get a true "full screen" view without the edit tools? The help manual promises such a view.

How do I get a true "full screen" view in the new version of Iphoto without the edit tools showing? Weirdly enough, the help manual promises such a "full" view, which was always available in my earlier version of Iphoto.
Thanks, in advance.

Click on the Edit button to get into Edit mode. Click on it again to come out of edit mode.
Regards
TD

How can you securely erase my eMacs HDD without the use of a disk drive?

I want to get rid of my eMac, it runs fine and would be a waste if I just threw it out, but the disk drive doesn't work, how can I securely delete the HDD to get all personal info off of it so I could either sell it or give it away while still working? I also, surprisingly after nearly 15 years, have misplaced the original startup discs.

Well, you didn't state that in your original post. Sorry for the misunderstanding. Here's an option for you:
Open Accounts preferences and click on the lock icon to authenticate. Create a new user account by clicking on the Add [-] button. Be sure to configure this account with Administrator status. Log out of your account and log into the new account. Now delete your account. Be sure to select the last option that completely removes your account. If there is a sub-option to Securely Erase then select that option. If not then see Mac OS X 10.4 Help: Removing files from your computer. Note the option for securely erasing free space. It's time consuming but will assure none of your files can be accessed. If you aren't concerned about your data's security then you can skip any options to securely erase free space.

HELP - How do you Merge 2 Users to one without the stuff being Duplicated?

my friend that helped me with my computer today with her mac computer a while ago her computer crashed and she got a new mac and now for some reason on her computer she had to create a new user so meaning for certain stuff she had to switch back and forth between the 2 users and she wanted to Merge 2 users, on Mac but the First was from back up and the Second is the new user I had to set up and the new user is the most current one and the other thing is she does not want the stuff duplicated so how do you merge them

You can just drag any of your data from the Documents folder to the Shared folder. Then, when you log in as the other user it will be available and you can drag it into the new Documents folder. If you're looking for other preferences or Application Support it gets tricky to do by hand.
What I'd do is start over if it's new. Just boot into boot up holding command-r keys into your Recovery Volume.
Then choose Utilities > Disk Utility, erase the volume and reboot. This will be an Internet Recovery and will take a while. Then, the first time the user boots the machine, while still in Setup Assistant when prompted do the migration and all will be fine.

How do you set up an apple account without the credit card

I want to have another apple account without an credit card cuz i dont have one the old one is my uae account which has a lot of arabic stuff but i want to have gta vc and sa in this ipad

There are instructions on this page for how to create an account without giving credit card details : http://support.apple.com/kb/HT2534

How do you run a full virus scan

How do you run a full virus scan on the Imac

Take a look at this article:
http://en.wikipedia.org/wiki/Phishing
Running a virus scan would not help at all - someone got your email address and is now hoping you're dumb enough to use the links they provided and give them information so they can use your credit card or checking acount number, password, etc.
I would change my user name and password immediately (if not sooner!!) - make it difficult to guess. Do it at least with the bank involved; however, to be safe, it wouldn't hurt doing it with others as well.

How to structure an OOP flash website?

Hi all, just getting my feet wet with OOP and actionscript
and wanted to find out it there is any tutorials on how to
correctly stucture an object oriented website without using any
timeline code (all based on class files)?
Thanks in advance,
Jake

Hi Kglad,
Of course i tried a few google searches before typing out
this post! Maybe you could be more specific on the exact keywords
used as it have tried the following searches "structure flash
object oriented website", "flash object oriented website", "oop
flash site" but unfortunately they didn't bring up anything of use.
Hence the reason why i posted this question (isn't this what the
forum for? i'm sure you could answer every post on this forum with
that response).

How do you structure a .book with an EDD?

Hi all,
I am learning how to convert legacy, unstructured FM documents into structured FM documents and need some help. So, I created a conversion table from my unstructured documents, created the EDD, applied the EDD to the unstructured document to create a structured document and now need to tweak the EDD.
My question is, what is the correct way to layout the EDD rules for a book using multiple document styles? For example: My book contains a title page, TOC, one or more chapters, a glossary of terms, and one or more appendixes (or is that a appendicies?.)
I am thinking the element rule would look something like this:
Element (Container): BOOK
Valid as the highest-level element.
General rule: TitlePage, TOC, Chapter+, Index, Appendix+
Followed of course by other elements required for the structure. However, I did see an EDD that I am sure was outlined like this (though I can't recall where:)
Element: TitlePage
Valid as the highest-level element.
General rule: Blah blah blah
Element: TOC
Valid as the highest-level element.
General rule: Blah blah blah
Element: Chapter
Valid as the highest-level element.
General rule: Blah blah blah
Element: Index
Valid as the highest-level element.
General rule: Blah blah blah
Element: Appendix
Valid as the highest-level element.
General rule: Blah blah blah
If the second structure is correct, how do you define the Book element? On the Adobe forum, I was told one EDD should be created for all book elements, which makes sense to me.
Okay people, fire away. Remember I am a neophyte in structured FM.
Thanks,
Adam

Thanks Van, that does clear it up for me... a little. My confusion now is, if I set all the book sections as valid at the highest level, then how does the book get structured as the starting point for the sections contained within it? I have tried to find a sample EDD detailing exactly this, but to no avail - my search brought up courses where this is covered, but not the actual EDD structure.
When I try to structure the book with the EDD, the book comes up red with its children elements looking just fine. Ahh! You have to love that learning curve.
Regards,
Date: Thu, 24 Sep 2009 06:43:41 -0600
From: [email protected]
To: [email protected]
Subject: How do you structure a .book with an EDD?
Adam,
Following up on some of Russ's sage advice, you asked:
If the second structure is correct, how
do you define the Book element? On the Adobe forum, I was told one EDD
should be created for all book elements, which makes sense to me.
As Russ said, your BOOK element looks fine. Not sure how far you have gotten, but when you open a document file that is in the book, its root element will be Chapter, TitlePage, Appendix, etc. That is why you have to declare each of these as being valid at the highest level. When you click in the book file window and look at the structure view, you will see that the BOOK element is the root element, and its content will be TitlePage, TOC, Chapter, Chapter,...etc. The book and all of its component files have the same EDD. The definitions for the BOOK element, as well as the TitlePage, TOC, Chapter, etc elements are all contained in the same EDD. I hope this helps to answer your question.
Van
>

How can I view my full billing history for the app and music stores without iTunes installed?

I just received an email receipt from Paypal showing a $12.99 purchase from iTunes. I almost NEVER purchase anything over around five dollars in the app or music store. Since PayPal does not show what this purchase was for, I have not received the receipt from Apple yet, and I cannot find anyway to look up online what this purchase was for....I need help to find out ASAP what this purchase was. If my account has been compromised or if I have been incorrectly charged for something, I would like to get the issue handled immediately. I do not want to install iTunes on my PC (nor should I have to for Pete's sake), but I cannot see anything recent at all in my app or music history on my iPad (not that I would ever purchase anything for $12.99 anyway...I just don't). Thanks in advance for any tips!

How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password

How to get structure of IDOC into xi in the scenario is IDOC - XI - File

hi XI Guys,
When i want to Integrate SAP sys(IDOC) with File how to get structure of IDOC into XI, As we will define Data types in File -> XI -> File. Please send Step by Step process as i am new to Netweaver(XI)
ThankYou,
B.Pushparaju.

When i want to Integrate SAP sys(IDOC) with File how to get structure of IDOC into XI
>>>>
import the IDoc under the imported object in your SCV. Note that import should be allowed for the SCV.
As we will define Data types in File -> XI -> File.
>>>>
Ref. these blogs to help you out ..
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

How do you change/adjust border width for all the cells in a table created in Pages?

How do you change/adjust border width for all the cells in a table created in Pages?
Note- I am trying to figure out how to create and format tables in the latest version of the Pages app on an iPad air (iOS 8.1.1.1) . Creating tables, adding or removing borders for individual/all cells in a table seems straight forward. However the default border style seems to be a heavy black line. How do I change this?
I found the option add or remove borders for all/ individual cells in a table, however I can't find any option within style/format dialogue screens for changing colour or line thickness for table cells. Likewise I can't find any clear instructions on how to do this in apple help pages or support website
Btw- I'm assuming it is possible to customize/adjust the colour & thickness of selected lines in a table created in this app (it's fairly easy to do this word processing apps like MS Word) please let me know if this is not actually possible in Pages

They know perfectly well what they took out of Pages '09.
Well over 90 features.
Do you think you posting feedback is going to remind them of what they did?
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

Query: how to use structure and selection and what's the difference between

Query: how to use structure and selection and what's the difference between these two?
Would be appreciated if some experts here give examples to demenstrate on how to use structure and selection in query and what's the difference between these two?
Thanks in advance!

Hi Kevin,
1. Well by default all the KF that you include in your query go into a Key Figure Structure. You can additionally have another structure for defining how your chars are laid out. A common example is a Calmonth structure where you have selections for 12 months, quarers and YTD values. This would be a char structure with different selections (for each month, qtr etc)
2. Yes, a selection with a KF is the same as restricting a KF. You can use am RKF is you have one on the left hand side, or if you need to do this locally in the query, right click the structure and choose New Selection, then proceed to choose your KF and reqd char values.
Hope this helps...

How do you bulk download all files submitted to the form?

How do you bulk download all files submitted to the form?

I'm using the fileReference code to pull it from my server
but I dojn't understand how to specify that it needs to be saved as
an mp3
below is an example of the code:
import flash.net.FileReference;
var fileRef:FileReference = new FileReference();
fileRef.addListener(listener);
var url:String = "URL link here";
if(!fileRef.download(url, "my audio.mp3")) {
trace("dialog box failed to open.");
}

I have a 120gb Classic that has no space left on it. i am going to buy a larger gb capacity ipod as soon as i get clearer instruction on how to get the old ipod content to the new ipod. How do you get content from one ipod to the other?

how do you get content from one ipod to the new one? my content is on an external hard drive not on my pc and i have run out of space on my 120gb classic. can you get old ipod content to new? my itunes has only got short cuts, the real content is on an external drive? can this be done?? please help

If the content is on an external drive, but your library knows where to find it, then it should all work. Connect your device, make some selections for what to put on it, and sync. If, on the other hand, your current iPod is the only place holding some of your media then see this user tip: Recover your iTunes library from your iPod or iOS device.
tt2

How do you structure a full flash website without the timeline?

Similar Messages

Maybe you are looking for