How do you use the P1102W Printer with an Apple iPad?

How can I print docs. from my iPad to the P1102W? Other printer manufacturers have a printer server app that would use WiFi or is there a way to have the printer as part of the cloud?

Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix/setup:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
   http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
More info from this:
   http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
  http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
Regards.
ps. You also need your printer supports Network connection - Like any vendor, HP even has many more products. You have to buy the right want.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

    How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver?  I have been trying with no such luck.
       I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth.  But for now, I would just like 2 computers to talk and then eventually talk to our own device. 
    One is a desktop w/ the Belkin F8T012 USB adapter.  It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash.  It says it cannot install it because it cannot find the necessary hardware.  I thought this USB adapter was on the approved Bluetooth devices list?  What else should I try?  Another Bluetooth USB adapter? 
    The other computer is a Dell Latitude 820.  It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module.  On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter).  It came with a serial port interface which we modifed to go through a bluetooth interface.  It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port.  But we would like to use the Bluetooth VIs in LabVIEW.  I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well.  Do I just uninstall the driver and then try to have Windows install its own driver?  Do you have any other recommendations?
    Thanks,
       Javi

    Hi Javi,
    This sounds like an issue with Windows and your specific Bluetooth devices.  As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers.  Take a look at this link for specific requirements for using Bluetooth with LabVIEW.  Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here.  Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver.  You could check out the Microsoft Knowledgebase for more information.  Thanks and have a great day!    
    Stephen S.
    National Instruments
    1 Test is worth 1000 expert opinions

  • How do you use the MASK tool with 4K footage?

    Hi everyone!
    Normally when I use the mask tool, I drag it onto the footage and four nodes appear on the clip, one in each corner - and then I can move each corner to where I want it...
    I've just shot some 4k footage using a Canon 1d-c and for some reason, when I drag the Mask onto the footage, the four nodes still appear but I can't move them around!
    Does that make sense?
    Any help would be massively appreciated!
    Thanks in advance!

    There shouldn't be any difference in being able to adjust them just because you're using 4K. I can't reproduce the problem and can't think of a reason why it would happen. Hopefully someone else will chime in.
    Russ

  • How do you use the ATV with the remote when you place it out of sight?

    I placed my ATV behind my tv, though it does not wake up and work with the remote control. How do you use the ATV in this type of situation? Will the Bluetooth keyboard work with it if it is behind the TV?
    Thanks.

    Yes bluetooth and wifi (remote app from your iPhone) are far more likely to work for you.

  • How do I use a regular printer with my iPhone?

    How do I use a regular printer with my iPhone?

    you can't unless it's an AirPrint enabled printer or you purchase a 3rd party app like printopia.

  • How do you use the Multiple Item Information dialog box ???

    How do you use the Multiple Item Information dialog box ???
    Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
    1. The way iTunes sorts tracks and albums
    2. The reason to select a leading check box
    3. Why there are Option selections (Yes /No) and leading check boxes.
    4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
    Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
    Thanks

    As Christopher says, it's a compilation. Different tracks are by different artists.
    Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
    Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
    That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
    If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
    Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
    Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
    tt2

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • How do you use new ipod nano with itunes 10.6.3?

    How do you use new ipod nano with Itunes 10.6.3.  I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11

    The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
    (85225)

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • How do you change the fuse in a UK Apple 5w USB Power Adapter?

    How do you change the fuse in a UK Apple 5w USB Power Adapter?
    Ours has stopped working and we presume it must be an internal fuse, but how do you access it as there is no 'slots' as on the 12w version?
    All UK power devices must be fused to comply with regs but I can't work out how you open the 5w adapter to change the fuse.

    This is the power adapter I have http://store.apple.com/uk/product/MD812B/A/apple-usb-power-adapter
    Is it really only a 12 month warranty? Seems a waste and environmentally criminal to throw away an adapter without being able to check the fuse!?

  • How do you authorize a Macbook Pro with a Apple iTunes Account?

    How do you authorize a Macbook Pro with a Apple iTunes Account?

    kelli masselink wrote:
    How do you authorize a Macbook Pro with a Apple iTunes Account?
    See Here for full details...
    About authorization and deauthorization
    If using iTunes 11... See this Discussion...
    https://discussions.apple.com/thread/4631735?tstart=0

  • How do you change the credit card on your apple account?

    How do you change the credit card on your apple account?

    Settings>iTunes and App Stores>Apple ID>View Apple ID>Sign-in>Payment Information

  • How do you change the date printed on pictures with Photosmart A646?

    How do I change the date printed on my pictures when using the Photosmart A646 with Windows 7?
    It says 01-01-70. I have explored every option on the printer's touch screen as well as on the print properties screen on the computer and can't seem to find a way to change the date.
    This question was solved.
    View Solution.

    If you took a picture with the date stamp feature turned on then you can not change the stamp.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?

    I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
    Thanks

    Hi,
    This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
    You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
    https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
    http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
    Benoit Lecours | Blog: System Center Dudes

  • How do I use the App store with macbook pro and mac pro

    I currently use the app store with the mac book, but want to buy (share?) apps and music with the mac pro.
    I can't find anything that specifically outlines how this works.
    I use SplashID with the macbook and an iPhone, and want to use it (and sync it) on the mac pro as well.
    If you buy apps for a macbook, can you use them on a second machine, or do you need to buy it a second time?

    Your license from the MAS allows you to download and install the apps on as many Macs as you own or have under your control (institutional or employer supplied Macs.) The Mac should to be running Mac OS X 10.6.8 Snow Leopard or Mac OS X 10.7.2 Lion. Open the MAS app on the Mac Pro and sign into your account to have access to download all of your previous purchases in the Purchased pane.
    Simple apps can also be dragged & dropped over a network connection from the MacBook to the Mac Pro.

Maybe you are looking for