How Do You Write Thermocouple Readings From Multiple Channels to One Text File?

Hi Everyone,
I am having difficulty writing a Labview program that allows me to combine readings taken from 8 thermocouples to one text file. I am using a NI cDAQ - 9174 with NI 9219 modules.
Attached is a copy of my program thus far. I have figured out how to combine readings from 8 thermocouples to one waveform chart but the text file will infact be more vital.
I am very new to Labview and only require it for this task so the simpler the solution the better. Apologies for the lack of technical language.
Any help would be much appreciated.
Amy

Here's one simple possibility...
Of course, this shows incomplete file handling, and you'll probably want to truncate your floating point values to a few decimal places. I have used this kind of operations for generating text and csv files for thermocouples, much like you are doing.
Good luck!
Dan

Similar Messages

HT1449 how do you move all music from two computers into one itunes account?

How do you move all music from two computers into one itunes account?

An "iTunes account" is an online account you use for buying music, like a bank account. An iTunes collection is the media you see when you open iTunes. Which do you mean?
If it is two computers, it would also help to know where these are located. Are they on the same local network? If they are, try Home Sharing (and you have control of both and you aren't just trying to get music fro your computer to your friend's computer in another state). If they are not, you'll have to use an external hard drive or flash drive.
Is this on a PC? Your computer information says Windows but you posted this in the iTunes for Mac forum.

How do you limit TOC navigation for multiple users on one computer?

If you have 5 Adobe Captivate 5.5. Projects linked together to play consecutively how can you set up a TOC so that each new user starts from the beginning and can only go back to slides that the new user has viewed? We have the TOC set to Enable Navigation, Navigate Visited Slides Only, and View Status Flag. This is a required training video that will be taken by many users. We need them to be able to go back to the sections that they already viewed but not be able to see the sections that others have already watched. In other words, we don't want them to be able to advance ahead to the sections that the previous test takers have viewed.
Message was edited by: DOLOnlineTrainers
Problems:
•     Remove the TOC and they have no navigation abilities to see something they may have missed
•     Keep it in and the viewer can advance to parts they have not viewed as the previous user set the ability
•     Put a back button in and they can only go back one at a time and have no ability to get back to where they were if they keep hitting back other than watch over
•     Tried the clear button in TOC under status flag which clears the status flags yet it only works on one section at a time and does not clear all linked projects
•     Is there something we are missing? Tried reading blogs and really can’t pinpoint problem

To get each user to have a different experience when viewing the content, you need to have some way for each user to be uniquely identified, otherwise the browser has no way of knowing that THIS is not the same person that was looking at the content an hour ago. The way this is normally achieved is by getting users to log in as a different profile.
There's no EASY way I can think of to achieve what you want WITHOUT users having different profiles. You would need to get some custom HTML programming done by someone that basically mimicked separate browser sessions under the same login. It's theoretically possible, but I've never been required to do anything like this.

How would you apply different calibrations to multiple channels

I'm attempting to apply calibration data to multiple channels. The calibrations could have been done at different times for different channels and could be using different fits. I think I have a solution for just applying the calibration information to one channel. I'm posting the solution for one channel in this post. In the next post I will include the multi-channel problem I'm working on. I had to add txt onto the initial file in order to post this.
Thanks in advance.
Solved!
Go to Solution.
Attachments:
Apply Calibration One Channel.vi ‏138 KB
Initial.txt ‏1 KB

Thanks for the links John. I just logged on to post my working solution so I haven’t had a chance to look at them yet.
I’ve been working on this problem and have come up with the below attachment. I believe the logic is correct, but do not know if this is the most efficient way of doing this. I start by reading the calibration information in my ini file for only the channels that I am collecting data for. This is accomplished by the case structure enclosed in the for loop. The calibration values are stored as variables so I don’t have to read them with each data point I collect. I then start the data collection within my while loop. As I collect the data I pass it through a for loop where I apply the calibration curve to it and pull the calibration variables from the 2nd case structure. I’m using a for loop for this so I can index the wave files and apply the correct calibration information to each one. The channels and sections will be inputs to this vi from the choose channel vi.
John I don’t know if this is better or worse than what you are suggesting. I will read the links you sent me.
Does anybody have any comments on what I’ve put together?
Thanks, Eric
Attachments:
Acquire and Transform Data.vi ‏209 KB

How do you retrieve iTunes media from many locations to one file

I have all Mac devices.
The particular item I have a question about is my itunes media file.
Since I have a very large collection, I was advised by apple support to move my Itunes Media folder to the 1.5T wireless WD hard drive I have.
All was going well, until either itunes update occurred or my Macbook Pro OSx had updated that is when I started to notice I have many, many itunes media folders and I want and need to know how to stop this default from occuring and the hardest part is to accumulate all my media that is in itunes media files many on my MacBook Pro in subfolders and on my WD wireless Hard drive that essentially has done the same.
It has produced most cases many, many copies of each of media, and due to the many places that the media got switched to, some items need to be located to play. Especially Movies. None of the data is on cell phone, ipad or icloud. It is mainly conflicts somewhere from files on my Macbook Pro and what is on my WD wireless hard drive. (I only save media on this hard drive)
I have attempted to organize itunes, but it seems to perpetuate the problem.
Is there anyone who knows the best way to find and consolidate media for itunes and place it in one folder. Is there some App out there that deals ONLY with itunes media consolidating?
Thanks,
Tina C.

What do you mean "retrieve"?
If you mean previously purchased music, then you cannot, unless you are in the U.S. Then you can use the recently released icloud ( beta version).
Tap itunes, then tap purchasd

How do you redact the header from 1000+ pdfs at one time?

Is there a way to redact a header from each of a large group of pdfs? I know that I can do "Search & Remove Text" from a folder of pdfs but if the same text that is in the header is somewhere else on the document and I only want to remove the header, how do I do that? Also, how do I "apply redactions" to each of an entire folder of pdfs all at once?
I'm using Adobe X Pro for pc.
Thanks for any assistance.

If the header is actually defined as such (i.e. it can be removed or edited with the Header/Footer tool in Acrobat) then you can create an Action to remove the header or replace it with a copy that doesn't have the text in question.
There's an Apply Redactions step available when constructing an Action.

How do you change the volume for multiple clips in one go?

Hi all,
Im having some trouble with audio. Im posting this in a rush so sorry in advance if its a bit muddled! Im editing snow reports with a journo piece to camera (track one lapel microphone) with overlay (track two nat sound ).
1. is there a way to only bring in track one only and track two only from the source monitor?
2. Is it possible to adjust the volume on multiple clips that are on the timeline (so that i can bring down the nat sound for all of the overlay track two)
At the moment im bringing them into the timeline and adjusting them individually. I tried lowering the volume on one clip and saving it as a preset but it wont let me.
your help is greatly appreciated
Paul

Duplicate the audio once editing is done. In the Mixer window, apply the Fill Left effect to one audio track, and the Fill Right effect to the other. Then adjust the mixer appropriately.

How do you stop all devices from going off when one is being called?

After most recent update for apple, all my devices are going off at the same time when only one is where the call is gong to. I have 2 iPhones, 3 iPads and an iPad mini and one newer iPod. Is there a way to stop this? It is kind of a pain.

Go to Settings > FaceTime and turn "iPhone Cellular Calls" to off on each device. It is a feature of Continuity: Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support

How do you stop the camera depth of field affecting one text layer?

Just as the heading says it really
, i'm doing a fly through sort of thing and as the camera slows down to give the viewer time to read some text the depth of field of focus runs out and the text begfins to get a little blurry, is there a way to stop the text from being affected by camera DOF? Do i have to make the text a non-3D layer?
thank you very mnuch in advance
paul

Hi, Thanks for your response,
I could adjust the focal length on the camera to match the text but that then makes some other elements in my project change their focus, or 'blurryness'. I was just hopeing to keep the camera as it was and just make the text layer be not affected by the camera's focal length. Turn off DOP for the text type of thing. Is there such a setting? Thank you so much for your time
paul

Import 800K photos (many duplicates) into Aperture from multiple folders in one hard drive.

I have a hard drive with 800,000+ photos in it, many are duplicates after I have made multiple back-ups to different drives over the years and then transferred all the photos to this new drive. The photos are located in different folders but are all in the same hard-drive. How do a import the photos in the easiest/fastest way? How will they get sorted, by date? Is there anyway that I could delete the duplicates without losing photos? I have many photos with the same file name (but from different cameras), tumbnails, edited photos etc.
Very thankful for your assistance!

Hi,
You can import photos from multiple folders.
Just click File >> Get Photos and Videos >> From Files and Folders
Now select the folders you want to import photos from (they should be at same level in the directory, say all folders in My Pictures) using Ctrl+Click, tick the checkbox for 'Get Photos from subfolders' if not already checked and then click 'Get Media'.
Hope that will help
Thanks
andaleeb

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How do you Deauthorize a machine from your account

Hi all, I don't know if I'm posting in the right place or not, If I'm not then I'm sorry. How do you Deauthorize a Machine from your account, anybody know? what it is. When I set the account up to buy tracks from Itunes. I was using the same Laptop that I'm using now, Just a differnt hard drive as The old hard drive died on me. I never bought any tracks from Itunes so I didn't have any to lose. I couldn't deauthorize this laptop because I didn't know that the laptop was going to die on me. In went the new hard drive. re-installed windows xp pro & re-installed itunes 8.1 clicked on authorize this machine & it came up with 3 machines out of 5. it's the same Laptop on the account. how to I remove this laptop twice from the account is it possible cheers?, If i do remove 1 of the machines, will I lose the rights to play back the tracks that I've bought today?

You can't deauthorise 'dead' installations or computers you no longer have access to individually. However once you reach the limit of 5 authorisations you have the option to deauthorise them all in one go from your iTunes account and start over. *Just note that you can only use this option once a year*: About iTunes Music Store Authorisation and Deauthorisation
See also this article: One computer using multiple iTunes Music Store authorizations

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do you remove a picture from a theme?

Hi all gurus.
This must be the most silly question so far in the forum but I have to ask again: How do you remove a picture from a theme?
I uploaded a background picture for the Masthead Function Area but now I want to remove it. Since the correspodning field is blank when you go into the editor you can't erase the picture's URL
What you can do is to browse to, and choose, a new picture and then erase the URL in the field. The mentioned area is then actually emptied and the color set in the field "Background Color of Masthead Function" is shown.
But, and here is the problem, when you save the theme the picture is back again! Isn't there the possibility to show the background color, for which there is a field, instead of a picture? Do I really have to upload a picture just containing the color I want to have??? If so, that must be one of the most stupid functionaliteis I have seen in the portal so far, indeed...
I'm most grateful for every suggestion of how to solve this in a decent way and not the idiotic "replace picture with another picture" way.
Best regards
Benny

Hi Raghu.
Unfortunately it didn't help. Their solution with writing "none" in the field is only applicable for those objects where you have a field determening ways of showing the object. There you have the different behaviours like "repeat", "non-repeat" and "none" and there you can write it directly in the field.
The field of which I am talking doesn't have these options and hence not "none". I still tried it though but it didn't work, the picture was back after saving the theme.
Best regards
Benny

Why has iTunes seperated a album which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Why has iTunes seperated a album into indevidual songs, which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Steve MacGuire a.k.a. turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields. If they are not a multiple CD set you still need to make sure the disc number fields are set correctly or all empty.

How Do You Write Thermocouple Readings From Multiple Channels to One Text File?

Similar Messages

Maybe you are looking for