How does 'Does not contains' work in advanced search?

I'm deploying a application based on JHeadsart and i am very enthusiastic about it! Thanks for the good work. I have a question about the 'Does not contains' search option in the advanced search/set by user mode.
It looks i have to use wildcards which is not necessary with the contains option.
Example:
In the JHeadstart demo tutorial.
I search on the lastname of employees with 'does not contain'.
If i use does not contain 'A' i get 107 records
If i use does not contain '%a%' i get 51 records
If i do not enter any criteria i get 107 records.
Is this the intended behavior?
Thanks,
Ruben Spekle

Ruben,
This is not intended behavior, you have found a bug!
It turns out that we do set the wildcard usage in case of "does not contain", but we only interpret this wildcard usage if the operator is "like" (and we should also do this when the operator is "not like").
We will fix it in the upcoming release. If you want to fix it before that, you should make a subclass of JhsApplicationModuleImpl and use that as the superclass of your application modules. In your Impl class, override advancedSearch(String, ArrayList, Boolean), and use instead of QueryAttribute your own subclass of QueryAttribute. In your subclass of QueryAttribute override getQueryValue to also apply the wildcardUsage when the operator is NOT LIKE.
Thank you for bringing this bug to our attention!
kind regards,
Sandra Muller
JHeadstart Team
Oracle Consulting

Similar Messages

  • Arrow key scrolling not working with advanced search- Adobe Reader X

    I'm using adobe reader X and when I get results from an advanced search I am scrolling down the search results with the arrow keys, but the document will not update. I know this will work. Can anybody please help?

    I am also having this problem.  Previous installations of Acrobat X allowed me to use the up and down arrows to navigate the search results, but no longer loads the appropriate page in the document.  I have to click each entry or hit the enter key after using the down arrows to update the page.

  • How to get notes to work on iCloud

    I am trying to get my Notes to work on iCloud but it keeps asking me to create a me.com account.
    I do not use a me.com account for iCloud

    Thanks for you reply Julian.
    I do have a me.com address but it asks me to create one.
    When i put my address in it says this address is already in use

  • How to set a default folder in Advance Search

    We have enabled the Search Scope Selection option for the default search iView in the Tool Area.  Therefore, when a user clicks the Advance Search link in the Tool Area, they can choose the index they wish to search or they can select a folder by browsing the KM folder structure.  When they click on the browse button, their initial folder is /root.  We would like to set the default browse folder to a lower-level folder, like /documents.
    Does anyone know the best way to set the initial search folder for the default search iView?

    Hi Andrew
    The short answer is that I dont think you can change the default "browse folder". It will let the end users browse whatever folders they have the permission to view. But you can solve your problem in some other ways, like:
    1) Remove any permissions regarding the root folder for the end users. In this way they will not be able to browse it through the search component. Configure permissions for all other folders you dont want end users to access.
    2) Create a range of meaningful indexes and only let the user search the indexes (with a meaningful name), not the folders. If you like, you can hide the folder search option by adding &EnableSearchFromFolder=False to the KM search parameters (search the forum for more info).
    3) Give the users access to a simple KM navigation iview with a customized layoutset that only lets the end user browse the documents repository and contains a link to the UI command "search_from_here" which will "Opens a dialog box for searching within the current folder or subfolders" (taken from the description of the ui command).
    Best regards,
    Martin Søgaard

  • How can I change font size of advanced search results?

    Once I do an advanced search the font is very small. Any way to change it?

    Printer font size is controlled by your printing software or browser settings. You must change the font size in these programs.

  • Setting up exchange, step by step,and  . .  it  . . does  . . not . . work

    I have an iPhone (not the new 3g). I installed 2.0 today. I can't get Exchange to work. I use Microsoft Outlook for my job, and I mainly would like to get my email remotely without having to open up a safari page on my iPhone, enter the login and password, and then go through a pretty cumbersome process to send and receive email. I never have issues opening up a safari page on my macbook, logging in, etc.
    I feel like I'm doing things right when I attempt to set up a new account (below is a generic description):
    Email: [email protected]
    Username: Lindsay
    Password: Mypassword
    Description: [email protected]
    Then I click "Next." It then says Verifying Exchange account information. Then I get this message:
    "Unable to verify certificate. While automatically discovering account settings, the certificate from "bla.com" could not be verified."
    I then get two options, accept or cancel. I click accept. I assume that this could be a problem right here, and perhaps not one associated with Apple or my iPhone, but perhaps with my work's server.
    Then it says Enter your exchange account information. In the Server part, I enter mail.bla.com (which is the exchange address for my work), and click Next. It then says Verifying Exchange account information. Then it says:
    "Unable to Verify Certificate. The certificate from "mail.bla.com for account "" could not be verified."
    I get two options, accept or cancel. I click accept. Again, this step may be a problem.
    It then says "Exchange account verified." That sounds promising. Then it says "Select info to synchronize using exchange." I only leave mail on and leave contacts and calendars off. I click save. Then I quickly get a notation at the top that talks about my account being "(null)" and then the message goes away within a second.
    So . . . my bla account shows up in my accounts. My inbox, however, is empty and any attempt to write email does not result in an outgoing mail.
    So does anyone have any suggestions?
    Oh, and I signed up for mobile me, 60 day trial, in the hopes that that would I would be able to set up exchange to "push" email that way (as I thought mobile me was supposed to do), but that does not work either. In iTunes, I'm only given the option I'm given to sync are dot.mac accounts.
    I'm a frustrated kid right about now. The tutorials really don't give much help in the way of setting up accounts; I'm not sure why

    To manually install your server's certificate:
    1. Make sure your IT department has allowed mobile access to your account on the server
    2. Certificate for your domain (ie exchange.mycompany.com) the company I work for don’t use verisign or others so the domain wont secure when accessing remotely, to fix this do the following:
    a. Go to your company webmail/exchange server using your web browser
    b. Double click on the padlock in the bottom right of the screen, then:
    i. ON FIREFOX – Click the security tab, then view certificate, then details, then export, and save it as a X.509 Certificate (DER), and make sure you type .der in the filename at the end (save it to your desktop)
    ii. ON IE – click Details tab, Click copy to file, click next, choose DER encoded binary, click next, call it certificate.der, click finish (it will be saved to your desktop
    c. Now send an email to another account on your iphone (you will need another email account already set up, so .mac, gmail, etc etc) with the .der file attached
    d. Download the email and click on the attachment
    e. Install the certificate (the iphone will warn you)
    f. Re-install your Exchange account
    This will fix the "Configured for sync (null)" message, but you may still have problems.
    Also, don't forget to do your username as domain\user if your company uses a domain.

  • Does icloud notes synchronization work behind a proxy

    Basically all icloud syncing works with the exception of notes behind our corporate proxy server.
    Reminders, contacts, calendar all work fine.
    Just notes that doesn't, if I turn off proxy and go on to guest wirless which has direct connection it works fine.
    Has anyone else got the same issue?
    Have tired using http web proxy settings and proxy script as well

    Similar problem: I noticed Notes is not updating to the iCloud properly. Are there any additional ports (TCP/UDP?) that need to be open to sync Notes to iCloud. I would welcome a technical answer to this problem that I can relay to our network people.

  • Does End-Note 6 work with pages 5.0?

    Guys I'm desperate... I've just updated pages and with the update End Note doesn't seem to work. I'm writing my PhD thesis without End Note I'm dead. Please Help.

    Solved the problem. You just have to download the latest version of the End Note plug-in and it starts working just fine. You can download from here http://support.apple.com/kb/DL1692?viewlocale=en_US&locale=en_US

  • E-M5 Mark II: Why does LR6 not support working with the full 4:3 raw image for pictures taken using a different aspect ratio?

    When importing Olympus E-M1 or E-M10 raw images which are taken in aspect ratio different to native the 4:3 MFT sensor format, LR will display the frame as crop overlay to the full image as captured by the sensor. This is very useful because at time of postprocessing one can still control the position of the frame, and modify if required.
    I was very suprised to see that for E-M5 Mark 2 this is not supported in LR6. The raw file in LR6 corresponds exactly to the frame which was chosen while shooting. Full 4:3 image information is present in the ORF raw file though, which can be easily seen eg using Olympus Viewer.
    Is there any specific reason why this useful feature has been neglected for E-M5 Mark II?
    Thanks
    Karsten

    Try asking in the Lightroom forum.
    Photoshop Lightroom

  • How do I get rid of Nation advanced search

    I suddenly have this stupid search engine aI don' twant and I can figure out how to get rid of it

    Do Not use Linc Davis Suggestion.  That uninstall program asks to reinstall more malware onto your mac.  I would not trust it.  If Nations is underhanded enough to slipde this onto your browsers without telling you, do you honestly think they will not instal more maliscios stuff using their "uninstaller"?  The fact is to remove this requires removing extensions or add ons in each browser you use.  Then making sure you change the default search engine back to google or Bing and also changing your home page back to it's original homepage. 
    I am running a variety of tests now to determine if there is any other hidden features of this malware.  One thing I did notice is that it caused Google to think I was running constant searches and to ask for a checkl to make sure I was not a bot.  So I am concerned there is other stuff still running even though I removed it.  Another forum suggested removing your scripting additions, I found no files in there that had not been there since way before this malware arrived.  I moved them to a folder on my destop and that process did nothing to get rid of the malware.
    I am still trying to determine how it got onto my =computer to begin with since I have little snitch and I see no log of any outgoing traffic to allow this to install.

  • :: Tutorial Announcement :: Building :: Advanced Search :: Application.

    Hello everyone.
    In this tutorial i will show you how to create an easy and powerfull :: Advanced Search :: that allow Visitors of your site to search through records and other members in your site.
    This :: Advanced Search :: is give the visitor to search for members registered in your site, it`s very useful if you have dating site, because it provide the searcher the chance to search between number of records are matching same age, say we need to search about:
    - Man looking for Women age between 18 to 30.
    * the results will give us how many member are matching this search criteria
    The estimated completion time for this section is about 15 minutes. It depends on your authoring knowledge with Adobe Dreamweaver and Developer Toolbox.
    :: Go To Tutorials ::
    :: Go To Online Demo ::

    Hi there Waleed (or anybody who can help
    My name is Charis
    If you have time I would like a little help....
    I have been following your tutorial "Building Advanced Search" Tutorial
    It is great, Just what I am looking for ........ but I can't get it to work properly (work at all)
    I am pretty good at Dreamweaver I can setup the rest of my site ok I can create databases insert and display data no problem
    I can follow your tutorial steps 1,2 and 3 ok but I get lost in part 4 "building results page" It is all a bit over my head but I have been trying
    I am having trouble creating the recordset, I can create simple recordsets no problem but I have never had to cut and paste anything so......
    In yoututorial "step2 Copy and past into SQL Query"
    I am assuming you mean paste into the 3rd text field on the recordset dialoge box, below the "name' and 'connection' fields
    I can copy and paste the code into that field no problem
    I am guessing that I have to test it and then the variable fields would be automatically populated.... but no....
    I follow your diagrams and create the variables 'KTColParam1' and 'KTColParam2' and configure as shown in your diagrams (screenshots)
    But in you next diagram there are KTCColParam1,2,3,4,5 and six and I not sure how to configure them?
    And that is as far as I can get
    Am I missing somthing? AM I doing somthing wrong?
    Could you please give me a little help to sort this out? or update the tutorial with a little more detalail would be great
    My email is [email protected]
    This is the exact thing I need to get my site up and running so any help would be great

  • OAF Page Personalize Page to add a new criteria in Advance Search

    Hi All,
    I am new to OAF. I need to add a new criteria (Asset Activity) to the Work Order Advance Search page in EAM module.Asset activity field has to pick from the 'Create Work Order' Form. I can able to identify the CO class associated with this field in the 'Create Work Order' form.
    How to achieve this by personalizing the Work Order Advance Search Page.
    Any help would be much appreciated.
    Thanks in advance,
    -Mukesh.
    Edited by: Mukesh on May 1, 2012 12:48 PM

    Hi All,
    I have done the following steps.
    1. From the Work Order Advanced Search Page, clicked on Personalize "Advanced Search".
    2. Created a Criteria Item with ID 'AssetActivityAS' and also created a Message Styled Text under this criteria.
    3. Back to the Advanced Search Page, clicked on 'Personalize Page' page in the bottom.
    4. Create an Advanced Search Mappings with ID 'AssetActivityMap' and Results Item as 'WorkOrdersVO.AssetActivity' and Search Item as 'AssetActivityAS'.
    5. But when I click on Apply, it's throwing the following error.
    oracle.apps.fnd.framework.OAException: oracle.adf.mds.exception.MDSRuntimeException: Unable to find component with absolute reference = /oracle/apps/eam/workorder/webui/EAM_EW_START_PAGE.WorkOrdersVO.AssetActivity, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
         at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java(Compiled Code))
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java(Compiled Code))
    etc...........
    I found WorkOrdersVO(oracle.apps.eam.workorder.server.WorkOrdersVO) from Business Component References Details of About Page: Work Orders.
    Am I doing the right steps to add a new search criteria in Advance Search page?
    Can anyone help me to resolve this issue?
    Thanks in Advance,
    -Mukesh

  • Google advanced search suddenly behaving strangely

    I'm seeing this problem on both my iBook G3 and PowerBook G4
    Both are running OS 10.4.9 with current software updates.
    Problem occurs with both Safai and Firefox.
    I often use Google advanced search. As of yesterday, when I try to place the cursor in a field or clicking anywhere on the page for that matter, I'm immediately returned to the www.google.com page.
    The advance search page looks peculiar. The Google logo is at the top left where it belongs but the bar with the legend "advanced search" that normally is under it is behind it instead.
    I'm able to work around this odd behavior by holding the control key while clicking but it's a nuisance. Wha' happen?
    I've checked this out on several other computers as well. G5 DP 10.4.9 with current updates, G4 PowerPC 733MHz 10.4.8, G3 iMac DV 500Mhz 10.4.9 without recent iTunes, QuickTime and security updates all work OK.
    G3 iMac 500 MHz with all recent updates does show same problem.

    Strange Google advanced search behavior was corrected yesterday.

  • SRM 7.0 Advanced Search Object Type

    Dear All,
    We use SRM 7.0, I want to remove some object types from Advanced Search options in Portal. For example, in standard advanced search, you can select shopping card, confirmation, purchase order, contract... etc. And i dont want some emplyees to see all purchase order or contracts.
    How am i going to delete for example purchase order option from advanced search ?
    Best regards,

    Hi
    Advanced search drop down menu is based on SPRO configuration
    SRM server -- Cross application basic settings -- POWL and Adv search
    Here Standard object types will be defined as SAP entries under define objects types for advanced search.
    Also, default application will be assigned for each object types.
    If you deleted any of these standard object types, then that object type will not be available in advanced search for any SRM roles. However, that is not advisable to deleted standard objects.
    Alternatively, if you want restrict certain group of users to access the some object types, you can control through the configuration powl_queryR which is query visibility at role level.
    You can control the the same at user level if you want through powl_queryU
    Regards,
    Krish

  • Operators in advanced search view

    Hi Experts,
    could you tell me how the available operators are determined in advanced search views?
    I build a search view based on a own custom BOL and want to remove some operators now.
    Thanks in advance!
    Best regards,
    Alex

    Nevermind!
    Solution: Component Specific Settings -> Define Operators for Dynamic Queries in SPro.

Maybe you are looking for