How does internal Flash update server get updated?

I just set up the directories described in the admin guide into a server running IIS7 and copied the Z files into the structure following these instructions:
7. Copy the installer files (.z files) to the fp-major-version/install directory created in Step 2.
When finished, you see something similar to the following:
https://your.server.com/pub/flashplayer/update/current/sau/11/xml/version.xml
http://your.server.com/pub/flashplayer/update/current/sau/11/install/install_all_win_ax_sg n.z
http://your.server.com/pub/flashplayer/update/current/sau/11/install/install_all_win_pl_sg n.z
http://your.server.com/pub/flashplayer/update/current/sau/11/install/install_all_mac_pl_sg n.z
Configure clients
• Create an mms.cfg file with the following entries (replacing your.server.com with the name of your server):
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
SilentAutoUpdateServerDomain=your.server.com
• Deploy Flash Player 11.3 or higher.
• Deploy the mms.cfg to all clients for which you want the Background Updater redirected to your internal server.
I'm guessing that the clientsthat are configured with the mms.cfg that points to our server downloads those .z files and the Flash updates are contained in those files.
That seens OK, but it isn't clear to me how the update server itself gets the next set of installer update files.
Do I have to wait until I hear there is another Flash update available and then go manually download and extract another cab into those directories each time?
Is there any way to set the update server to automatically download the newest cab as soon as they are available and copy the z files from the cab into the correct directories?
Since 11.9 is the current version, I am also guessing there will be a Flash version 12 soon and a new "12" directory will have to be created for those updates.

Similar Messages

How does Photo Stream in iCloud get updated on Apple tv?

When I open Apple TV and go to iCloud pictures and want to play a slideshow, the last updated pictures are a month or so old. How do I get those updated to show current?

Put the photos that you wish to use for your presentation or screensaver into a photo stream shared album and then choose that album as your screensaver in your screensaver settings.

How ENABLED_FLAG on PO_VENDORS table will get updated?.

All,
Can someone please post how this ENABLED_FLAG on PO_VENDORS table gets updated to 'Y' vs 'N'. What is the process updated it?. Isn't it based on END_DATE_ACTIVE?. Because i see few vendors for whom END_DATE is past date but still ENABLED_FLAG is 'Y'.

As far as I know Summary_Flag column was added in earlier version of Oracle Applocations to all the application tables. Even PO_HEADERS_ALL has it though it is never used.
Last time when I had done some RnD i had concluded it has some thing to do with KFFs.
Thanks
Arun

Keep getting error:Cannot connect to update server.Partial update...

I am using FF 6.0.1
I keep seeing a window pop up that says something like:
connect to update server
partial update failed
Have no idea what is going on, this has been popping up for quite awhile. When I chose the RETRY button, it sits there and the long bar that shows the progress never fills in..
Thank u for any help
Carla

If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup
If files already have been downloaded then remove the files in the updates and updates\0 folder.<br />
You can delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
* http://kb.mozillazine.org/Installation_directory

[Flex 4.5.1] How does Button's fontSize property gets applied to labelDisplay?

How does Button's fontSize property gets applied to labelDisplay when lableDisplay's fontSize is not explicitly set. I just tested it it works but I don't know how. I looked through the ButtonBase class but I don't see any code applying the fontSize to the labelDisplay nor I see code in the Label to get parent's fontSize property if not set. Could someone explain to me how this works? I would be very grateful! Thanks !

Ok I found it, thanks for the heads up. I pretty much get the idea of how things work now
Could you please take a look at one more probably very simple to you question. I had to customize a button to be able to have 2 lables in it with different fontSize and topPadding in this case. I kinda copied some of the code from ButtonBase + added the styles and some code I needed to make it work.
Here it is:
package
    import flash.events.Event;
    import spark.components.Button;
    import spark.components.Label;
    [Style(name="numberFontSize", type="Number", format="Length", inherit="yes", minValue="1.0", maxValue="720.0")]
    [Style(name="numberPaddingTop", type="Number", format="Length", inherit="no", minValue="0.0", maxValue="1000.0")]
    public class DialPadButton extends Button
        public function DialPadButton()
            super();
        private var _numberContent:*;
        [SkinPart(required="false")]
        public var numberLabelDisplay:Label;
        [Bindable("numberContentChange")]
        public function get numberContent():Object
            return _numberContent;
        public function set numberContent(value:Object):void
            _numberContent = value;
            if (numberLabelDisplay)
                numberLabelDisplay.text = label;
            dispatchEvent(new Event("numberContentChange"));
        public function set numberLabel(value:String):void
            numberContent = value;
        public function get numberLabel():String
            return (numberContent != null) ? numberContent.toString() : "";
        override protected function partAdded(partName:String, instance:Object):void
            super.partAdded(partName, instance);
            if (instance == numberLabelDisplay)
                if (_numberContent !== undefined)
                    numberLabelDisplay.text = numberLabel;
                if(getStyle("numberFontSize"))
                    numberLabelDisplay.setStyle("fontSize", getStyle("numberFontSize"));
                if(getStyle("numberPaddingTop") || getStyle("numberPaddingTop") == 0)
                    numberLabelDisplay.setStyle("paddingTop", getStyle("numberPaddingTop"));
        override public function styleChanged(styleProp:String):void
            if (!styleProp ||
                styleProp == "styleName" ||
                styleProp == "numberFontSize" ||
                styleProp == "numberPaddingTop")
                if (numberLabelDisplay){
                    if(getStyle("numberFontSize"))
                        numberLabelDisplay.setStyle("fontSize", getStyle("numberFontSize"));
                    if(getStyle("numberPaddingTop"))
                        numberLabelDisplay.setStyle("paddingTop", getStyle("numberPaddingTop"));
            super.styleChanged(styleProp);
So here are the questions:
1) If I am not going to use the styles in css then maybe I should better declare them as variables ?
2) I don't really understand how does the button gets updated and redrawn when I set Styles or properties like that cause there is nowhere a call to invalidate the display list (at least I couldn't find in the Button and ButtonBase classes) as I read in the Flex docs: Overriding the styleChanged() method
UPDATE: I forgot that setStyle calls invalidateDisplayList... and I just figured out that when the lable sets the text on the TextBase it calls the invalidates. I answered this one myself
3) I don't understand why do I have this code (copied from the buttonBase):
if (!styleProp ||
    styleProp == "styleName" ||
    styleProp == "numberFontSize" ||
    styleProp == "numberPaddingTop")
instead of just the code below:
if (styleProp == "numberFontSize" ||
   styleProp == "numberPaddingTop")
5) I am also not sure why I had to use content and label (again copied from the ButtonBase) when they are basicly the same thing
Currently with this Custom Component I've made, I am able to put 2 lables in the skin. One is the default. And the other one takes the default values I put on the label itself + uses the two styles numberFontSize and numberTopPadding to change that default values in case they need to be altered.
Although this works, I am not sure if I did it the best way or why does it work as you can say from my 5 questions
I hope you or someone who understands this have the time to answer them for me and anyone who reads this Thanks
Message was edited by: FM_Flame

How does 0SOURSYSTEM Souce system Id get filled?

Hi Gang,
How does 0SOURSYSTEM Souce system Id get filled?
I'm trying to recreate some transfer rules which were deleted.
Is there an ABAP program or transfer program to populate this field?
Or do I hard code a value?
Thanks,
John Hawk

Hi,
Yes you need to write code..
INCLUDE rsbctbbp_transfer_r3.
TABLES: srm_proj_contr.
DATA:   l_s_errorlog TYPE rssm_s_errorlog_int,
          l_text TYPE string.
Retrieve source system ID form the source system
CALL FUNCTION 'RSDG_ID_GET_FROM_LOGSYS'
        EXPORTING
          I_SOURCE_SYSTEM = TRAN_STRUCTURE-ORGLOGSY
        IMPORTING
          E_SOURSYSID     = RESULT
        EXCEPTIONS
          ID_NOT_FOUND    = 1.
      IF SY-SUBRC <> 0.
        RETURNCODE = 4.
        message E087(R7) with TRAN_STRUCTURE-ORGLOGSY into l_text.
        move-corresponding syst to l_s_errorlog.
        l_s_errorlog-record = RECORD_NO.
        append l_s_errorlog to g_t_errorlog.
      ENDIF.
    ELSE.
      RESULT = SPACE.
    ENDIF.
ENDIF.
See
Problem with mapping 0SOURSYSTEM and 0LOGSYS in BI7.
Thanks
Reddy

How does Internal Business Elimination work?

Hello!
Reading through this link http://help.sap.com/saphelp_nw04s/helpdata/en/d5/784d3c596f0b26e10000000a11402f/frameset.htm
Any one knows...
How does Internal Business Elimination work?
How is the new key figure calculated?
I really appreciate any information about that, because I don't know if this solution fits the problem I'm facing.
Thanks a lot
Andy
Edited by: Andy Smith on Mar 30, 2008 4:50 PM
Edited by: Andy Smith on Mar 31, 2008 10:04 AM

Thank you Shweta,
There is one point I don't understand very well. When you say "there has been some business between CC2 and CC3", do you mean CC3 is a partner cc of CC2?
Maybe my problem is easier. Imagine I have a group of cc in the last level of the hierarchy
cc1, cc2... cc5
I need a new key figure (apart from 0Balance) for each cc that shows the balance of the internal operations, I mean for example, CC1 has CC2 and CC3 as partner cost centers. Then I need for each cc the quantity produced by their partner cost centers.
Example
CC1 CC2 CC3...
Balance | New KYF
100.000 | 50.000 <-- internal operation: sum of CC2, CC3
Any information about how to do it would be great.
Thanks!

How does the Delta functionality works while updating Infocube from PA

Hi Gurus
How does the Delta functionality works when you send forecast to the Info cube from the Planning Area.
As I have weekly based planning, every week we have to update the forecast into the Cube. If I update every week into the Cube , then the values are going to append in the Info cube.
Shall I create ODS in between the Planning area and the Info cube .
(or)
Any other method ?
Please Suggest.

Hi Preetham,
Data Extraction from planning area to infocube usually its supports for full update only, when u r going to load the data from planning area to cube ,it deletes the previous data and u vil get the fresh data, this is the best method performance wise,
if u want to use the delta functionality u can go for planning area to Dso, Dso to cube, it vil supports the delta functionality, but it vil degrades the system performance,
regards
ravi

Flash Player not getting updated automatically on OS X

Hi, I have Mavericks installed and my Flash Player "Updates" settings are set to "Allow Adobe to install updates (recommended)". But still, the Flash Player is not getting updated automatically.
When I click the "Check Now" button, a dialog box appears notifying an update is available and it takes me to the Flash Player download page. Isn't this supposed to download it and update in the background instead?

Hi,
Can you please go to your System Preferences -> Flash Player icon -> Updates tab or Advanced tab (If there is no Updates tab) and post a screenshot here using How to post a screenshot in the forum
-Varun

How can i control which iView gets updated when a nav node gets clicked?

Hello,
Following setting: the content area of the desktop inner page inside the default frameworkpage usually consist of just one iView.
But what happens when there are 3 iViews inside? How do i have to call the pageloader which of the 3 iViews should get updated when a nav node of the detailed navigation is clicked?
Thanx

Hi
Since you will be using the Merger Id property, they will be linked to a single link in navigational area.
Refreshing a page / clicking the link in navigation Pane will result in refreshing of all the iViews.
Regards
Chander Kararia
# Please close the thread once get the correct answer. Give rewards for answers.

How does the Logical System GUID get created

In R3 table CRMPRLS has a logical GUID for its logical system name. How does this get created/updated? Is it created during the initial replication of the data between R3 and CRM? Why I am wondering is my systems where working ok in my QA environment then something happen to change LSGUID in my CRMPRLS table on R3. So now my middleware is not working. I will use notes 588701 and 765018 to fix the problem, but I am trying figure out what caused it before it happens again in my production environment.
We are doing one thing to mention is that our R3 environment is being setup to talk to 2 different CRMs. I am wondering if the setup of the second CRM caused the guid to change. If so what step during the middleware setup of CRM would cause that?
Thanks.
Matthew

HI Matthew,
We are facing a similar issue. Could you please let us know the activities done to get the issue resolved?
Did you revert back the changes done as suggested in the Note 588701, if yes can you let me know where the changes has been done and how has it is reverted back?
Also, in the table CRMPRLS in R/3 we do not see an entry for the external SRM system.
Please note, for replicating material into SRM we use the CRM Middleware.
BR// 420

How to integrate flash media server 4.0 live streaming for iOS devices ?

Hi All,
I have website which has live streaming module its working fine, same module i want to integrate for iOS devices. For live video streaming we are using FMS 4.0. So please let me know how we can integrate this for iOS devices using flash media server 4.0.
Thanks in Adavnce
Mohammad Sharique

You need to place the crossdomain.xml in the webroot folder. Create a text file in the webroot folder using notepad, and call it crossdomain.xml. The text below will give you a wide open access policy, which is fine for testing.
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" />
</cross-domain-policy>
For debugging HTTP streaming I recommend you get hold of something like Charles or Fiddler. These will greatly assist in pinpointing any issues.

How does the "OS X Server" work on the Mac Mini and other devices?

Hey guys. I'm looking to sell my MBP for a Mac Mini. It will be for photography. Down the road I'll get a MBA 13 and sooner than that, a iPad Mini 2.
I'm a little confused with the functions of file sharing on my current laptop. In Preferences>File Sharing, everything is ticked on, but I can't connect my iPhone via bluetooth to send files. I don't have another Mac computer to grab files from to test. When I have the Mini, MBA, and iPad, I'll be transferring photos back and forth, along with other files like word documents for school.
-Do I need to have the Server Mini to do those sorts of things? (if not, how do I do them?)
-What exactly does the "OS X Server" mean?
-How can I send files easily from Mac to iPhone/iPad
-Is the $200 price bump mainly for the additional HDD?
Please list any other helpful info regarding this stuff. thanks
The reason I'm choosing a Mini over and iMac is because it'll be easier to sell down the road if I decide to upgrade to a Mac Pro. As well as it being cheaper for me to get two screens.

iDevice Bluetooth data transfers are individually app based
and only transfer from one iDevice to another running the
same apps. The only other ways are via iCloud for Apple
apps or or possibly other WiFi connections with specific apps
to companion apps on the Macs or syncing the apps via
WiFi sync or USB sync.
So, the Server app does nothing to change this.
File sharing between a MBA and a Mini, however, is as simple
as setting up file sharing and setting up the proper permissions
on the folders you wish to share. For simple file sharing, there is
no need for the Server app.

How To Use Flash Media Server For RPG Game Development Project ?

I have a educational music video game development project (A Sea Voyage) for whcih I am thinking to use the Adobe Flash Media Server for develping the 3D Game for which I plan to also use two other key tools, blenderartist.org for 3D Creation of my ship, and use the popular game engine tool, unity.com to integrated all my game elements.
How to use the Adobe Flash Video Streaming Server Element for this RPG Type Game, internet friendly and desktop anchored ?
Cafe Twin
Metro Washington DC Hub

I'm more or less in the same boat. I've got the admin console
up. I am able to run the vodtest application locally pointing the
video file to rtmp://localhost/vod/sample.flv or using the server
name instead of localhost as in rtmp://mclmedia/vod/sample.flv
I can also load the html and swf file to my xp machine that
has access to the server via our internal network. (DNS isn't
configured yet) But the connectionFailed message appears when I try
to call the videos using rtmp://mclmedia/vod/sample.flv

How to use flash media server with cisco show n share live event module?

hello all
Is it possible to use flash media server in show n share (non dme)live event ? i 've configured flash media server, can receive multicast streams, bu i have no idea what to write in video url fild in the live event basic setup.

Hi Temur,
You should be able to stream from a Flash Media Server.
The URL should look like this:
rtmp://xxx.yyy.com//flv:
You can do some tests from a PC to get the exact URL that would suit your environment.
Regards,
Nicolas

How does internal Flash update server get updated?

Similar Messages

Maybe you are looking for