How does one send a file via UDP?

I need to send a binary file via UDP. The file has 99 32-bit binary words of data. How do I input the data to the UDP write command? I don't want to send the data sequentially..I would like to send all 99 words in a single UDP transmission. TIA.
-jlivermore

Something to be careful of is that while UDP is fast, it is not secure. You can lose packets and there is no way for the sender or receiver to know it was lost. Because UDP doesn't have a "connection" like TCP does, the sender doesn't know if the data is going anywhere and the receivers have no way of knowing if anything is being sent.
Picture a radio station. A guy working the night shift hopes there is someone somewhere listening to his broadcast, but he doesn't know. Likewise, if you turn on a radio and hear nothing but static, you may be listening to a frequency where there are no stations broadcasting, or the station transmitter might be off the air, or there might be interference keeping you from hearing the signal, but again you don't know which.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

How do i send a file via email so it opens in booklet form to other people

how do i send a file via email so it opens in booklet form to other people

You would appear to be doing the right method as in this work through:http://support.en.belgacom.be/app/staticpages/devices/en/#/nokia/c3-00/email/sending-an-email-messag...
Is there similar problem with Email without attachment?
Happy to have helped forum in a small way with a Support Ratio = 37.0

How does one upload a file from flex to a cfc

How does one upload a file from flex to a cfc?   Can you do the file upload via remote object? I usually do uploads cia cfm but prefer the asnc capabilities of remote object calls.

Hi,
The issue here is myFile. For flex we need to pass this name as paramenter becuase it's not html form item like:
<cfcomponent>
    <cffunction name="uploadFile" access="remote" output="false" returntype="void">
    <cfargument name="file" required="Yes" type="any">
        <cffile action="upload" filefield="#arguments.file#" destination="C:\temp\" nameconflict="makeunique">
    </cffunction>
</cfcomponent>
From flex I'm getting the file using fileReference like:
private function browseAndUpload():void
                fileReference = new FileReference();
                fileReference.addEventListener(Event.SELECT,fileReference_Select);
                fileReference.addEventListener(Event.CANCEL,fileReference_Cancel);
                fileReference.browse();
            private function fileReference_Select(event:Event):void
                fileReference.addEventListener(ProgressEvent.PROGRESS,fileReference_Progress);
                fileReference.addEventListener(Event.COMPLETE,fileReference_Complete);
                fileReference.addEventListener(IOErrorEvent.IO_ERROR,onLoadError);
                //fileReference.upload(request);
                fileName = fileReference.name;
                myFile.htmlText = fileReference.name;
                SM_RO.importNSA();
filerReference have an upload method to upload the file but I can't use that becuase I need to process my upload with my cfc.
I'm getting an error:
Failed to import the file. The cffile action="upload" requires forms to use enctype="multipart/form-data". Please also make sure the file is not open.
I can't find the way to setup the enctype becuase again i can have html form items in flex, or I can?
Thanks
Johnny

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac. Now I can't remove her e-mail address from Facebook. It was suggested to me that I try clearing temporary files from Safari but I can't find

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6. Now I can't remove her e-mail address from my computer. When I open Facebook her address shows in the user button. I do not have a Facebook account. It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this. Are temporary files the same as the cache? It also was suggested that I try clearing Safari cache. How do I do that?

Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

In the new Pages, how does one send an image to the background (and make it selectable)?

How does one send an image to the background in the new Pages and how does one make it selectable?

Also why don't TEXT to Speech short cuts established in system preferences work in the new Pages?
I am confused (and not completely happy)

I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

Subject: Migration
I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

Subject: Migration
I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

How does one send mail without a MobileMe account?

A friend has a new iPhone and can't send e-mails from Mail on her phone. I have always had a me.com addy so have never had to do this. Can someone please either tell me what to tell her or point me to an online reference for her? Thanks!
(I *have* told her to go into her service provider and get them to help her but she never has time. I assume her contract comes with an e-mail addy but I have NO idea what it is and neither does she. The provider is Telus in Canada)

The point of that box is to be able to specify the SMTP settings for the outgoing mail server for that particular mail account. If I am setting up a MobileMe account I need to set up the incoming and outgoing servers specifically for that account, not an incoming server for [email protected] and an outgoing server of [email protected] They are different accounts.
For the mail app on a Mac you can set up multiple accounts in mail (but all with matching incoming/outgoing servers for that account) and when you receive an email to one account it has a drop-down box that lets you respond from a different account if you desire. Perhaps in iOS 5 they will add this feature.
It is not a two-step process: You set up the Gmail account, such as [email protected] It will do it automatically, you actually don't have to go in and specify an incoming and outgoing server. Then if I send an email to [email protected] she reads it and if she wants to reply she does so and it replies from the [email protected] One step.

How does one save new files to an encrypted disk image?

I encrypted a particular folder, and used a sparse image to leave plenty of room, as well as using read/write permissions, but I don't see how to save new files to the encrypted folder.

So, I guess you have to save the file to the desktop and then drag it to the mounted disk?
No, you should be able to save directly to a mounted disk image via a dialogue box. There is no need for an intermediate step. As long as the encrypted disk image is mounted, it is open and appears to be just another folder.
As an experiment, open a Textedit document and save it to the mounted (open) disk image via Save As in Textedit. It should be able to do that.

How does one send an emali to RIM concerning wildly incorrect Map directions?

In hurry recently, I mapped my location and my destination.
I got the directions below:
1. Depart from White marsh Blvd, White Marsh, MD, USA, 21236.
2. Head SW on I-95 S. Go 2.4 mi.
3. Take exit I-695 W towards Towson. Go 0.1 mi. - THIS DIRECTION IS 180 DEGREES WRONG!
4. Bear right onto I-695 S. Go 1.7 mi. - THIS ROAD DOES NOT EXIST!
5. Take exit 35A - US-40 W/Pulls Hwy towards Baltimore. Go 0.1 mi.
6. Turn left onto Golden Ring Rd. Go 419 ft.
7. Continue on Pulaski Hwy. Go 2.0 mi.
9. Arrive at destination.
Any suggestions welcome
thanks

Re: the curved line for the river
Shapes you create don't have to be closed. You can create a curved line by starting to draw a shape that follows the contour of the river and then, when you get to the end, just hit the "escape" key. That will end your drawing. Then, just change the fill to none, and there you have it, lovely line!
Another cool solution if you can find the map in .svg format is to grab it from the web, like one of these:
http://commons.wikimedia.org/wiki/Category:SVGmaps_ofFrance
then, use svg2key to convert it to a Keynote shape
http://mcb.berkeley.edu/labs/zusman/dave/svg2key/
then, open the Keynote presentation and copy the parts you need into Pages.

How does one clear temp files in Mountain lion?

Computer summary shows a large nmber of temp files. Also, my system is becomeing very slow.
what tool do I use to TUNE UP my iMAC?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How do I send .band files via email?

Um, that's it:
I can't seem to email my .band files to my friends who share garageband interest.

CrakaC wrote:
I can't seem to email my .band files to my friends who share garageband interest.
If you have MobileMe, there's a new share feature which lets you upload a large file to your iDisk, then send someone a link to it in an email. They click on the link and download the file.
As HT said, a service like yousendit also works. Dropbox is also popular. But if you have mobileme, the new share feature works really well.

How does one send an email to a POP3 Server from a CVI application.

A desired enhancement of our existing SCADA application would send advisory emails to a customer when conditions warrant.
Each of the customers will enter the email address & password (if required?) to which they would like to receive advisory emails.
The app. is designed using LabWindows/CVI 9.0 base package.
Thanks for helping!!!!!
Kevin Montcalm
V.P. Engineering
Electrotechnics Corp.
elteccorp.com

Unfortunately, according to this page the internet library is not included in the base package. The same as Win32 API interface.
I'm afraid there is no solution but calling a separate library to send mail...
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How does one sync music from iTunes on a Mac with an HTC Windows 8 phone

How does one sync music files from iTunes running on a MacBook Pro with an HTC Windows 8 phone?

One doesn't.
Itunes syncs with Apple devices.
You can put the music on your phone. You would have to read the directions for your iphone to learn how to put your music on it.

In Pages 5 when I try to attach a pages document to an email it gives me 2 folders and 4 files ??? How does one email a pages document.

How does one email a pages document? In pages 5 when I try to attach a pages document to a gmail email it gives me 2 folders and 4 other files to choose from.

Sounds like you are using Gmail.
Pages 5 uses a zipped package of files as its format. 3rd party servers don't understand the format and show it as the component parts.
Use Mail toenail the file or zip the .pages document before sending.
Peter

How do I send a file that is 2 mb via adobe send file now. I have the student version of cs 6

How do I send a file that is 2 mb via adobe send file now. I have the student version of cs 6. Does this cost money, or can I send a certain size for free. I just want to send a file so I can access it on my ipad. It's a PDF that is too large to email.

Adobe Send can certainly do that.
Or you can do it manually:
upload the file to Acrobat.com
check the file on the Acrobat.com site and click Send
use Create Anonymous Link and click the Create Link button
copy the created download link and send it by email

How does one send a file via UDP?

Similar Messages

Maybe you are looking for