How easily will Arch configure my existing OS's to boot when installin

I have a machine that's currently got win 7, opensuse 11.4 and debian squeeze installed
/dev/sda1 windoze
/dev/sda2 opensuse
/dev/sdb1 debian
Other partitions on the same drives are used for storage and the suse uses an nfs exported /home
In the next week or so I'll be wiping the suse 11.4 (Tumbleweed) to install 12.1 which is coming out in 4 days, I've tried a basic arch and kde install on an old laptop and liked it enough that when I do the suse I also wanna add another partition and install arch to it
My question is, would there be a lot of fooling around to get my other OS's booting after installing arch?
I'll be backing up my current menu.lst obviously but it'd just be nice to know if the arch installer will reliably detect and configure the existing stuff without too much hassle before I start, I don't get much spare time to mess with my own computers so I need to plan it out as best I can and hopefully get it right first time

Ecky wrote:
Thanks for that bit of info there lagagnon, helps me plan the order in which to do things, was gonna install arch last as I can run through the whole suse setup/after-setup-config pretty quickly but it might be simpler to do it the other way round
Be plenty of down'n dirty stuff to get my teeth into with arch, yast has made me lazy!
I'm no stranger to a wrestle with grub issues but I ain't so conversant with it I don't have to resort to a google sometimes and it would be time that I could spend on learning stuff I need to about Arch itself, I know if I install the suse last the windoze and debian definitely won't need any fooling with to boot and pretty likely the arch won't either, it's pretty good at the grub auto-configure-on-install thing so I'll do 'er that way
Cheers
So, you'd like to learn about Arch, eh? You can always install GRUB2, along with the os-prober package from the AUR. If you choose not to go that route, just read the wiki page on GRUB to set up menu.lst. Also, if using Google to solve problems seems like a daunting task, you should probably start adjusting now; Yast is about as far from the Arch Way as one can get.

Similar Messages

How much will it cost to update to OSX Mountain lion when it becomes available?

How much will it cost to update to OSX Mountain Lion when it becomes available?

Abisingar wrote:
How much will it cost to update to OSX Mountain Lion when it becomes available?
I read somewhere it will be $299.00 I also read somewhere that it will be .99c I also read somewhere.......etc. etc. For goodness sakes, wait till it is released! We know nothing more than you except that it will be the next OSX.
Pete

How Long Will Arch last?

Hi, my question here is not to ridicule (or otherwise designed to offend anyone) but one of concern. Many distributions have a viable economic model which helps ensure that the distro can survive (Fedora is one prime example). The fact that Fedora has the backing of Red Hat means that it is almost always asured funding. Ubuntu is also moving in this general direction (although their model does not seem as reliable as Red Hat's yet.) What gurrantee do we have that Arch can last for many decades to come? The Arch devs are real people with real jobs. As far as I know they do not actually get and money from Arch Linux. What sustains Arch ( pays for servers etc.) Is it simply donations? Can Arch survive soley off of donations?
What are your thoughts and ideas do you have on how to make Arch a self sustaining distro while also keeping it free? Finally if Arch falls apart what would you do?
THIS IS HYPOTHETICAL THIS IN NO MEANS IMPLIES THAT ARCH IS GOING UNDER ANY TIME SOON!
( I would also like to take this time to conragulate the Arch devs for coming this far and thank them for all their work it is much appreciated.)

Gullible Jones wrote:... There's also Unununium (no kernel, damned if I know how!) ...
Read the FAQ (Introduction page) for more info about Unununium:
http://unununium.org/introduction
Something interesting:
On what platforms does Unununium run?
The latest plan is to implement Unununium as a Linux userspace process. Linux is a stable, available, well documented program which eliminates most of the mundane, uncreative aspects of usual OS development such as writing hardware drivers. It also provides an easy mode of execution, with a developed debugger such as gdb, and fast boot times, since there is no need for a full hardware reboot. This makes development much easier.
Running on Linux has disadvantages as well. Probably most significantly, some things are slower. For a slower speed in execution, we get a faster speed in development. Some day it would be nice to reduce overhead, but that's something that will wait until there is something running.
For some reason or another, this choice of platform leads people to question if Unununium can really be an OS. Of course, it really depends on how "OS" is defined. Unununium is an environment and a design common to all programs which depend on it, and in this sense might be considered an OS.

What is document flow for particulr document?and how it will be configured?

give me answ with detiled steps to configure document flow

Hi
The business cycle has different processes and each process will have a different documents to record the events/details of the activities about that activity. This is there even if the process happens manually.
It helps you to know the status of an order - ie., that particular order is in which stage of the business cycle.
As told in the above reply, the copy controls helps to link the documents and the field UPDATE DOCUMENT FLOW enables updating the preceding documents. The table that stores the document flow is VBFA and you can also see the document flow from any document by clicking the icon 'document flow'.
Thanks,
Ravi

How long will a new laptop, hp pavilion dm1- 2011. last when it is used out of Ac VOLTAGE.

hp pavilion dm 1- 2011nr. window 7. how long the battery can last when fully charged?

Hi,
Up to 9.5hrs BUT can be around 5hrs depending on how users use the machine. To help users keep the battery in good shape, HP has this article:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00596784&lc=en&cc=us&dlc=en&product=4290685
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How much will the iPhone 4S cost in Ireland?

Was wondering how much will a sim free 32 gb iPhone 4S cost when its released in ireland on Oct 28th
any one know?

Ah I wasn't aware that that would be updated… or even thought about searching there at all… i had only googled "iphone 4s verizon cost". Thanks

How will i configure third party sales order

pls tell me how will i configure for third party sales order

dear,
prasanta,
the configuration of third party sales order is given below
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *-- Seema Dhar
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
in third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
the processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing:-
if a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
when you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
you process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
i think it will fulfill your requirement if so plz reward point.
ambarish

How will i configure intercompany sales order

pls tell me how will i configure for intercompany sales order

Hi,
Intercompany Sales & Business Processing
An Intercompany sale transaction takes place when a sale occurs & the selling sales orgn belongs to a different company code than that of the delivery plant.
Intercompany business processing describes business transactions, which take place between two companies (company codes) belonging to one organization. The ordering company orders goods from a plant, which is assigned to another company code.
Ordering company Supplying company
Company code: 5555 1000
Sale Organisation: 5555 PBIL
Distribution channel: 56 PW
Division: 58 GC
Plant: 5555 1000
Customer: 215 Product: Nimulid
Ent Stru- Assignment- SD- Assignment- SD- Assign Sales Orgn: Distbn Channel- Plant
Sales Orgn Distbn Channel Plant
PBIL PW 1000/ 5555
5555 56 5555/ 1000
SPRO- IMG- SD- Billing- Intercompany Billing:
o Define Order types for Intercompany billing
o Assign organizational units by plant
o Define internal customer no by sales orgn
Assign Sales Doc relevant for Intercompany billing
IVo POR
IVo OR
Assign Organizational Units by plant: assign sales area of ordering company to the delivery plant.
o 1000 5555 56- 58
Plant Descp Sales Orgn Descp Distbn Descp Division Descp
1000 5555 56 55
Define internal customer no by sales orgn: create the customer of the ordering company in the company code of the delivering plant, but with the sales area of the ordering the company
Sales Orgn Descp Customer Inter Comp Descp
PBIL 215
Pricing procedure: PI01 (Intercompany pricing)
Determination Rule: OVKK
PBIL PW GC A 1 RVAA01
PBIL PW GC I 1 ICAA01
VK11: PI01
Create Order: VA01: POR: 5555-56-58: customer- 215, product- Nimulid, supplying plant: 1000.
Delivery
Goods issue
Invoice for customer
Invoice Intercompany billing
Processing an Intercompany sale:
To create an Intercompany sales transaction proceed with creating the standard sales order. In the sales order, change the delivering plant at the line item level & create a delivery for the new shipping point represented for the delivering plant. Proceed with the delivery functions of selecting the packing & posting the goods issue. Then create an external invoice that will be sent to the customer & create an Intercompany invoice. That will represent the billing doc between the delivering plant & the selling sales orgn.
An internal Intercompany invoice can be created by entering the delivery no again for processing when using the transaction VF01. One can also select the doc due for Intercompany billing by using the billing due list VF04. When using the billing due list be sure to select the Intercompany-billing doc as the documents to be used, by checking Intercompany billing.
A Check List for Intercompany sales processing can be the following:
The enterprise structure must be maintained correctly, i.e., the plants must be assigned to the correct company codes as well as to the correct combination of sales orgns & distbn channels.
The Intercompany customer must be assigned to relevant sales orgns
The delivering plant must be assigned to the sales orgn.
The material to be sold must exist in the original & delivering plant.
The sales order must be relevant for Intercompany sales & have an assigned billing doc type
The copy control rules must be defined between the standard invoice, such as F2, & the inter company invoice, such as IV.
The pricing proc may have a special cond type assigned to it. This special cond type may represent the price to Intercompany sales orgn or it may represent a special discount offered to the Intercompany sales orgn for the material sold
The standard system has the following cond types:
To represent the Intercompany price as quantity-dependent.
To represent the Intercompany condition as percentage.
regards,
sadhu kishore

How will i configure consignment process

how will i configure consignment process...

Hi,
Consignment Process
Scenario -
1. Client creates a consignment order for their distributor.
2. The consignment stock sits at the distributor location. The distributor sells some of this stock to end customer.
3. Client creates an issue order for this quantity, this order has end customer as the ship to as well as bill to parties.
4. When the goods are delivered against this order, the consignment stock is reduced.
5. Client then creates an invoice for the end customer.
SAP Solution -
1. Create Cosignment fill up order of type KB with distributor as sold-to, ship-to and bill-to and payer.
2. Create delivery for this order and do PGI, which shifts this stock to u2018customer consignment stocku201D (special stock w).
3. Assumption - the master data for the end customer exists in the system and has all mandatory partner functions defined.
4. Create a consignment issue order of type KE, which has sold-to as the distributor and ship-to, bill-to as the end customer.
5. Create delivery and do the PGI, which reduces the consignment stock.
6. Create invoice, which has the end customer as bill-to and the distributor as u2018payeru2019.
Assign Points if helpful.
Thanks and regards,
Naveen Dasari.

How will i configure partner determination for customer master

how will i configure partner determination for customer master data.

hi
Check this
BUSINESS PARTNERS AND PARTNER DETERMINATION
In the partner determination procedure you can determine whether partner functions can or should occur in a partner object (Customer Master, Sales Document, Item Category etc.) For each object, in which partner function can be created, you can define partner procedures. This also means that
For Customer Master
For Sales Documents
For Sales Documents and Billing Documents: for items
We can define our partner determination procedure for each of these levels as shown below. In Blue are given the ones wherein the Partner Procedures are assigned to the Partner Objects
Customer Master Account Group
Sales Document Header Sales Document Type
Sales document Item Item Category in sales
Delivery Delivery Type
Billing Header Billing Type
Billing Item Billing Type
Sales Activity Sales Activity type
By assigning a procedure you determine for which account groups (for the customer master), which sales document types (for sales documents) and for which item categories this procedure would be valid.
In the partner determination procedure you can determine for each partner function
whether the partner function is an obligatory partner function
whether the partner function can be changed in the document
BUSINESS PARTNER FUNCTION
By assigning a business partner function to a partner you can determine which functions the partner fulfils in the business process. Partner Functions are classified using partner type. The partner type represents the roles played by the business partner within the business transaction.
Following partner functions exist in the standard process of Sales and Distribution
Partner Type Customer
Sold-to Party, Ship-to Party, Bill-to Party, Payer and Sold-to Party authorized to release against a contract. You can define the sold-to party authorized to release against a contract in the partner screen of a contract. This partner may only schedule orders with reference to this contract, even when he is not the sold-to party authorized against a contract.
Partner Type Contact Person
Contact persons are natural persons whom you must contact at the customers for business processing (e.g. purchasers) Contact person can be created directly in customer master record.
Partner Type Vendor
A forwarding agent is an example of a business partner on the credit side, who is included in a sales process. If you commission a particular forwarding agent for deliveries to a specific customer, you can define the forwarding agent in the customer master record as the partner.
The other possible partner functions on the credit side in the sale process are interpreters, auditors etc. The forwarding agent is an agent who performs transportation services. This includes organizing the shipment, delivery and receipt of the goods, arranging the carrier services and handling the customs issues.
Partner Type Personnel
Employee Responsible
Sales Personnel
You can enter an employee from your firm as the person responsible:
In the Customer Master If the employee is normally responsible for processing transactions with this customer.
In the Sales Document If the employee is responsible for processing the Business Transaction.
STEP WISE PROCESS FOR PARTNER DETERMINATION PROCEDURE
Sales and Distribution->Basic Functions->Partner Determination->set Up Partner Determination->Set up Partner Determination for Customer Master.
First go to OVT0 create customer account groups. Here you make new entries, click whether it is a one time customer, description. Also you can do the field selection here for general data, co. code data and sales area data.
Now go to IMG logistics general business partner customers control define & assign customer number ranges define the number. Here you range that you want and assign it to your customer account group.
Now go to VOPA here the selection will be on customer master, click on partner procedures, create the partner determination procedure. The following steps need to be done in partner determination area
Assign partner function to account group i.e SP,SH, BP, PY to account group (debit side ). Sales and Distribution->Basic Functions->Partner Determination->Assign Partner Functions on the debit side to account Groups.
Then create Partner Determination Procedure.
Assign the Partner Determination Procedure to Partner Function.
Then finally assign the Partner Determination Procedure to acc group.
Important Points in Business Partners and Partner Determination Procedure
Partner relationship maintained/defined in the customer master is proposed automatically in the document header when you create a sales document.
In customizing we can decide whether several partners can be assigned to one partner function in the customer master.
In sales documents, the system is configured so that only one partner can be assigned to each partner function.
We can define partners at item level in the sales documents.
Business Partners that are defined at the header level however cannot be changed at the item level.
You can prohibit anyone from changing a partner that has already been entered in a sales document.
It is also possible to manually change or enter the address of a partner, such as the Ship-to Party. This change does not affect the master record.

How will i configure rebate management

how will i configure rebate management

Hi Prasanta Sahu,
Have you try transaction VBO1 (letter 'o' but not numeric zero)?
Please let me know if you encounter any difficulty.
Thank you.
Best regards,
HC.

How i will configure handling unit(3shirt in one pocket and 10 pocket in ca

Hi MM guru,,,
i want to know how Handling unit is configured..
actually my client is garment company...
senero is shirt pack in one pocket..and 10 pocket pack in one cartoon...
then how i will configure this and in sales order what will be material code.....i have confusion
kindly suggest me...
how i will sale the cartoon.from which material code
kindly suggest me in detail
Regards
Aqueel

Packing Material ---> MM01
material group packing materials( sales: general/plant)
packing material type
Raw material/Finished Goods
Mat group pack matls (Basic data)
Note : System picks the packing materials based on the packing material group defined in the raw material/ Finished Goods .
PACKING INSTRUCTION
1.POP1
packing material and Refrence material is given.
(with target quantity )
2.POP1
packing instruction made and packaging material is given.
(with target quantity )
3.POF1
Condition record
Reference material for Material packed .
ok ,

How will i configure third party billing

how will i configure third party billing....

Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material u2013 Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Also please go through this Building block
[Third Party Without Shipping Notification|http://help.sap.com/bestpractices/BBLibrary/html/J55_ThirdPartyWOSN_EN_US.htm]
thanks
G. Lakshmipathi

Airport extreme software will not install on vista, how can i still configure the router?

airport extreme software will not install on vista, how can i still configure the router? Trying to help someone with vista get an airpot extreme configured. 10.0.1.1 does not work, the software will not install correctly on their vista machine. How can I get into the base tation and lock it down?

Hi - Vista can be tricky - I need more info to see if I can be of some help - first, is the Vista machine a desktop or a laptop and is it fully up to date with Windows Update (sp2 or higher)? - next, are you trying to install Airport Utility version 5.5.3 which is the correct one for Vista? - and finally, what do you mean "it will not install" - what kind of error messages or evidence are you getting?

How will i configure stock transport order

how will i configure stock transport order...

Hi,
sto dividw into two type
STO with sd
STO with out SD
1) STO with out sd
here STO divide in two steps
1) tranfer the good one storage location to another storgae location
go to the tCODE MB1B , GIVE the movement type 301, give the plant ,storage location, and recevied storage location
go to the mb1b , give the movement 303, give thesuppling plant
then give the reciing plant
save then go to the mb1b then give the movement type 305
thanks
please reqrd

How easily will Arch configure my existing OS's to boot when installin

Similar Messages

Maybe you are looking for