How enable Security Section and Features on pwa sharepoint 2013

Dear Friends
how enable all Features "Security Section and Features" on site project server 2013 "PWA" SITE
I did Type Command
set-spprojectpermissionmode
Mode ProjectServer and Mode sharepoint
but Not appear Security Section in PWA Settings
how im Fix a Problem :(( Tanks a milion

Hi Tahere,
I understand that you want to know how to enable all properties pwa setting like this Database Admin in PWA Setting.
However, it is better to have one question one thread, then it will help others who have the same question as the original one can solve their problem too.
In the meanwhile, as this issue is regarding to Project Server, I recommend to post your issue in Project forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=projserv2010setup.
More experts will assist you, then you will get more information relation to Project server.
In addition, if you think the answer above is helpful, please mark it as an answer and it will help others who have the same issue.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

Enable Team Collaboration Lists Feature via PowerShell - SharePoint 2013

I need to enable the Team Collaboration Lists feature across the mysites 2013 web application that we have. I want our server team to do this programatically through powershell. I really have no experience with powershell but I think what we need is the
feature name.
Is there anyone that can provide assistance on this?
Thanks!
-Kyle

DO something like:
$WebApp = Get-SPWebApplication "http://<url of my site host root>"
for($i = 0; $i < $WebApp.Sites.Count; $i++)
$site = $WebApp.Sites[$i]
for($j = 0; $j < site.Webs.Count; $j++)
$web = $site.Webs[$j]
$teamList = Get-SPFeature | Where{$_.Id -eq "00bfea71-4ea5-48d4-a4ad-7ea5c011abe5"}
Enable-SPFeature -Url $web.Url -Identity $teamList
$web.Dispose()
$site.Dispose()
Nikolas Charlebois-Laprade Microsoft Certified Professional Software Engineer and Senior SharePoint Advisor http://nikcharlebois.com

How to secure iPhone and iPad when traveling abroad against xtra charges

How to secure iPhone and iPad when traveling abroad against xtra charges?

You can either put them in "Flight Mode" ( Found in settings. This feature disables 3G, 4G and Wifi), or you can go into your settings and turn off mobile networking ( also found in settings, this allows you to connect to wifi, but disables mobile networking)

Regarding how enable plant stock and storage location view

hi all:
   Could you please tell me how enable plant stock and storage location view for MM01?
   couldn't be better if there are detailed steps .
   Thank you very much!

Hi,
The views depend to material type. So you need update in the material type attributes.
SPRO - Logistic General - Material Master - Basic Settings - Material Types - Define Attributes of Material Types
Double click on the material type and update the views in 'User Departments'.
Thanks.

How to calculate when I need multiple WFE and APP servers in SharePoint 2013 ?

Hi,
Please let me know about those factors are involved on the above topic. Share something from the real experience or with examples in details.
Thanks
srabon

Hi,
NOte: some links although for 2010 but fits for 2013
for the WFE is the RPS Requests per second versus the users
to get the RPS
http://smallcitydesign.com/how-to-get-sharepoint-2010-requests-per-second-rps/
and this excel sheet to get the users versus RPS
http://pcfromdc.blogspot.com/2013/02/determine-max-users-from-requests-per.html
and here you are how to get the number of front ends
http://abhayajoshi.blogspot.com/2014/01/how-to-calculate-number-of-web-front_24.html
for Apps server, it is based on memory and cpu consumption, check those links
http://blogs.msdn.com/b/sanjaynarang/archive/2013/04/06/sizing-and-capacity-planning-for-sharepoint-2013-resources.aspx
https://technet.microsoft.com/en-us/library/ff758645.aspx
https://technet.microsoft.com/en-us/library/cc262971.aspx
the most important thing after you do you initial capacity planning is capacity mangement, check my wiki article in here
http://social.technet.microsoft.com/wiki/contents/articles/28226.sharepoint-2013-capacity-management.aspx
you can also make load testing using the following:
Visual studio or
https://gallery.technet.microsoft.com/office/PressurePoint-Dragon-for-58648ae4
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

Security Groups for the alerts in SharePoint 2013?

By default Microsoft has blocked to add Security Groups for the alerts in SharePoint 2013. It can be enabled but need to change the SharePoint System page setting with the help
of below link:
http://thesharepointfarm.com/2013/10/setting-sharepoint-alerts-on-active-directory-security-groups/
So my query is if I change the page setting then in future if any SharePoint updates/ hotfixes deploy in system so will it cause a problem??

I would wait as this is not a supported workaround (although it does work).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to Construct the Email To activity in SharePoint 2013 Workflow

I have a created a custom workflow and custom association and initiation form using SharePoint 2013.
My Assn. form is fine. I pass in the people picker (Active Directory group) value to my workflow just fine.
Now on my Init form I use the passed in value from people picker and display a list of users and email addresses from the people picker group. The list of users and email addresses are listed in a table with a check box to the left of each row. I am
using JQuery, Knockout and MVC web service to retrieve the values from the group.
All is well.
Now my users pick who they want to send the email to. Let's say they pick two users!
When the user clicks the submit button, I have JSOM code which starts the workflow and sends in the 2 users email addresses as an argument to theworkflow.
Note: I tried sending my two emails as a collection and failed. So i converted it to a string. The variable is called strUsers.
Since the argument is a string and Email Activity requires the To attribute to be an array, I use the BuildCollection<String> Activity to convert my string to an array.
Now in my workflow I use WriteToHistory Activity to write out my BuildCollection variable (recipients). Here's what is sent to the workflow history... [email protected];joejones@yahoo,com) Note:
Both names are bogus and I'm not Joe Jones.
I then configure the email Activity and set to To property to my BuildActivity variable (recipients).
When I deploy my Visual Studio 2013 solution, and attach my workflow to a publishing page, I am getting this error after I submit the Init form.
An unhandled exception occurred during the execution of workflow instance. System.ArgumentNullException.
Does anyone know of an example of how to set up the Email To collection value.
Note: I tried using comma and semi-colon for my string (strUsers). Neither worked.
Thanks
Tom
none

I think I'm getting close.
Here’s an
article
that helped me out and below is my code. Note: I added a ParseDynamicValue and GetDynamicValueProperty to push the data from the "emails" property to colleciton of strings called EmailCollect.
Here is what the data look likes
The value of Selected Emails is [{"emails":"[email protected]"},{"emails":"[email protected]"}]
Code excerpt in InitiationForm. Note: I am using MVVM and Knockout for the selected users from a list with checkboxes.
  //build array for workflow
  var emailUsers =
new Array();
  //cycle through viewmodel emails
for (var
i = 0; i < viewModel.SelectedEmails().length; i++)
var a =
new Object();
                    a["emails"]
= viewModel.SelectedEmails()[i];
                    emailUsers.push(a);
wfParams['strSelectedEmailsHMgr']
= JSON.stringify(emailUsers);
     // Get workflow subscription
and then start the workflow
var context = SP.ClientContext.get_current();
var wfManager = SP.WorkflowServices.WorkflowServicesManager.newObject(context, context.get_web());
var wfDeployService = wfManager.getWorkflowDeploymentService();
var subscriptionService = wfManager.getWorkflowSubscriptionService();
                context.load(subscriptionService);
                context.executeQueryAsync(
function (sender, args) {
// Success
var subscription =
null;
// Load the workflow subscription
if (subscriptionId)
                            subscription = subscriptionService.getSubscription(subscriptionId);
if (subscription) {
if (itemId !=
null && itemId !=
// Start list workflow
                                wfManager.getWorkflowInstanceService().startWorkflowOnListItem(subscription,
itemId, wfParams);
Now I deploy and publish the workflow but now I’m getting this error when trying to
System.InvalidOperationException: Looking up a value using a key is not supported on an instance of 'Microsoft.Activities.Dynamic.DynamicJsonArray'. at Microsoft.Activities.Dynamic.DynamicItem.TryGetValue(String
key, DynamicItem& value) at Microsoft.Activities.Dynamic.DynamicValueBuilder.PathSegmentFactory.ObjectPathSegment.Get(DynamicItem obj) at Microsoft.Activities.GetDynamicValueProperty`1.Execute(CodeActivityContext context) at System.Activities.CodeActivity`1.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
none

Can not specify the SMTP server port, username and password for my SharePoint 2013 web application

We have our SMTP server under port number 141 and we should add username and password. but inside SharePoint 2013, I can only define the SMTP server name , from email, reply-to . But there are not fields to define the port number , the username and password.
So can anyone advice from where I can define the port number and other field settings for the SMTP server ?
Thanks

i am no sure about user name and password. i never saw that option.
check this guide:
http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
http://blog.fpweb.net/configuring-an-smtp-server-for-sharepoint/#.UuANoxAo6M8
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
thanks for the reply, but in our case the SMTP is a separate server , and to connect to it i need to define the ; server IP /Name , port number, username & password. but in SharePoint there is no option to define the port number , and the links you
provide are regarding configuring SMTP server, while we already have an SMTP server but i need to connect SP with it . can you advice please?

Integrate Workday and ServiceNow applications with SharePoint 2013 online

Hello, we have to integrate Workday and ServiceNow applications with SharePoint 2013 online and need to display data from these applications
to SharePoint 2013 intranet site.
Any information about the integration of Workday and ServiceNow applications with SharePoint 2013 would be greatly appreciated. Thanks!
Regards,
Shailendra

Hi Shailendra,
I searched a lot, there seems very few information from internet and internal about this topic, I'm not familiar with Workday and ServiceNow applicaitons, I would recommend you may post in the following community sites(which should be offcial
sites) for a better assistance regarding the integration questions between Workday and ServiceNow and SharePoint Online(O365).
https://community.servicenow.com/thread/174050
https://community.workday.com/
http://community.office365.com/en-us/f/154.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How many server licenses do I need for SharePoint 2013?

I am new to the concept of CAL. I am reading about it. I found this linkhttp://sharepoint.stackexchange.com/questions/101914/how-many-server-licenses-do-i-need-for-sharepoint-2013
Suppose there are 2 users in the sharepoint farm. As per above link we requires 7/8 server license. So my question is do we requires 7/8 licences per user basis (2*7/8) or we requires 7/8 licences once only then we require 2 more licenses for 2 users (7/8 +2)?

The second option.
If you have 7 SharePoint servers then you need 7 SharePoint Server Licenses.
If you have two people in your company who can use SharePoint then you need two Client Access Licenses (7 server, 2 CAL).
If you had two hundred thousand users who could then you would need two hundred thousand CALs, but the number of server licenses would not change. (7 server, 200,000 CALs).

How to install roles and features via a script linked to an OU, to automate server builds

Hi all
I like to automate the installation of roles and features applied to servers via GPO script.
For my bare metal 2008 R2 installations, a simple .cmd script with something similar to below...
ServerManagerCmd.exe -install NET-Framework-Core Hyper-V Desktop-Experience SNMP-Service -restart
...added to the RunOnce registry key via GPO would deliver Roles and Features reliably.
This method does not work for me in 2012 R2. I've spent a day searching the internet. I cannot find a guide. I assume I need to use Powershell now. I am uncertain if signing scripts is a requirement for this to work for me? Please
could you let me know a method to automate the installation of Roles and Features to 2012 R2 via scripts delivered to bare metal servers via GPO.

I think you would do better by posting in the Windows 2012 forum. The issue is more likely that the exact name of the service or package has changed.
There are new tools in 2012 to install features and roles. I do not think they can be run from a GPO.
Here are the instructions:
http://technet.microsoft.com/en-us/library/hh831809.aspx
They show you explicitly how to discover the available Features and Roles on 2012 and how to use PowerSHell to install them.
¯\_(ツ)_/¯

How to setup email and sametime communications within MSProject 2013 with resources?

How do you setup Sametime and email communications with your resources in a MSProject 2013 Server project? It is much different from the stand alone version of MSProject 2013.

Iarllsyr,
I think you will see that almost all of us are saying the samething. Let me try and summarize it for you:
1) If you want "Project Server" to send out alerts/emails whenever you update and publish schedules, you will need to enable the alerts. Samething with SharePoint Alerts and emails.
2) The ability to directly email/chat with a resource from MS Project 2013, only comes with Lync Server and Its components installed in your farm (or if you are using Office 365).
3) There is 'some' integration between Lotus Notes/Same Time, but as far as I know, currently SharePoint 2013 is not currently supported with Sametime 8.5.x and 9.0 integration. Even if it was, I am not sure if it works the same way as Lync does.
Hopefully, that kind of clarifies/summarizes the scenario.
Prasanna Adavi,PMP,MCTS,MCITP,MCT http://thinkepm.blogspot.com

How to Create, Edit, and delet Alerts in sharepoint using COM or REST API

I need to create,Delete and Alerts using Client object model or REST API , I know It's available on server objetc model , but in client side how do it ,
Anu ideas

Hi,
According to your description, my understanding is that you want to create, delete and edit SharePoint alerts using Client Object Model or Rest API.
In SharePoint Client Object Model, there is very little that you can achieve when it comes to alerts.
For changing alerts, there is a ChangeAlert class:
change alert class
For Deleting alerts, you can call deletealert web service:
DeleteAlerts
For creating new alerts, it seems no such API support this, a workaround is call the new alert form "SubNew.aspx" using JavaScript to achieve it.
More information:
http://www.learningsharepoint.com/2013/09/17/client-object-model-doesnt-support-creating-sharepoint-2013-alerts/
Thanks
Best Regards,
Jerry Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to configure Search for a site in sharepoint 2013?

Hi,
I had a document library.
1)I want to configure search so that I can search documents from previous month, quarterly, half year, year, and all documents is possible.
2)Search results are organized with most recent documents at the top.
3)Search results have year as refiner that can be used to show results only from specified year (In library we have field with year when document create)
To achieve this what I have chane in site settings->search
and what I have to write for Result Types, Query Rules
Thanks

Hi,
Following are the steps you need to perform for creating the search center.
http://blogs.technet.com/b/tothesharepoint/archive/2013/10/30/set-up-a-search-center-in-sharepoint-2013.aspx (About Search)
1. Create the site collection by navigating to the CA(Central Admin) & select the Enterprise Search Center Template.
2. Create Content Source -> Navigate to the Search Service application->Create the content source if the content comes from other content farm (if different farm accout if it same add the site Collection URL in default Content Source. ( make
sure the crawl account must have full read permission)
http://blogs.technet.com/b/tothesharepoint/archive/2013/10/31/how-to-create-a-search-center-site-collection-and-enable-crawling-of-your-content-in-sharepoint-2013.aspx (Create
Search Center)
3. Once you add url in the content source and run the full crawl.
4. Navigate to the Search center created at step 1 and try to search with the document name. you will see the document.
http://blogs.technet.com/b/tothesharepoint/archive/2013/11/06/how-to-configure-the-search-results-web-part-to-use-a-new-result-source-in-sharepoint-2013.aspx (Go
to the document Library and configure the result source)
5. To configure the refiner please follow this post. You will see the modified refiner to refine your search http://blogs.technet.com/b/tothesharepoint/archive/2013/11/07/plan-to-use-refiners-on-a-search-results-page-in-sharepoint-2013.aspx)
Let me know if you req. any other information.
Regards,
Basant Pandey
http://sharepointfordeveloper.blogspot.com

How do I delete duplicate Site Columns in Sharepoint 2013

When I got to save a site as a template I'm told that there are duplicate site columns and the template can not be saved.
I found that under all of the e-mail submission site columns they are duplicated site columns for example
BCC
Multiple lines of text
Property Management
BCC
Multiple lines of text
PMRG Connections
I want to remove the Property Management ( I know that this is the site name where I copied it from), but they are duplicated all across the site collections.. every site and site collection has it duplicated, is this because I
enabled lists to allow email submissions?
either way I need to get rid of the duplicate item, so I can save sites as templates if needed.

There are a few required columns that can’t be deleted. They cannot be deleted through UI because
the Delete button is not available (as you already mentioned in your previous post). The only available option is using C# code (SP object) or Powershell commends.
By the way, I cannot find Date Received column in my Dev, I guess Date Received is the one of the columns added by custom feature. You may refer the link below for useful Powershell commend. It was written for SharePoint 2010 but should work in
SharePoint 2013 as well.
http://get-spscripts.com/2010/10/cant-remove-site-column-from-content.html
백상하 - Stop hacking my blog http://blog.naver.com/agilepoint
쉐어포인트 배움터 http://sharepointkorea.com

How enable Security Section and Features on pwa sharepoint 2013

Similar Messages

Maybe you are looking for