How ERP Application Can easily Increase Business Profits And also Performance?

ERP software is a Business Management software that provides all-in-one remedy to a company regarding its marketing, sales, finance, stock control, HR control, bookkeeping and preparing. ERP is also well-known as company procedure
control since it combines all the different divisions of a company and provides their specifications. It is an edge where details is introduced, prepared, handled and produced through few click of mouse. ERP facilitates in standardizing a company procedure
and manage its activities effectively.

Hi Anthony,
I agree!.  My partner wants to just replace the SA5xxs with ASAs, as we have never had problems with ASA vpn performance.
But I want to know WHY this is happening too.
I will definitely run a sniffer trace to see what is happening.
Here are some other things I have learned from the Cisco Small Business Support Center (except for Item 1 which I learned from you!)
1.  Upgrade the SA540 at the Main Site to 2.1.45.
2a. For cable connections, use the standard MTU of 1500 bytes.
2.b For DSL, use the following command to determine the largets MTU that will be sent without packet fragmentation:
ping -f -l packetsize
Perform the items below to see if this increases performance:
I was told by the Cisco Small Business Support Center that setting up a Manual Policy is not recommended; I am not sure why they stated this.
3a. Lower the IKE encryption algorithm from "AES-128" to DES.
3b. Lower the IKE authentication algorithm to MD5
3c. Also do the above for the VPN Policy
Any input is welcome!

Similar Messages

  • How Flex application can be loaded once together

    Hi,
    My question is that "how Flex application can be loaded once
    together"
    I am using some images and .swf files and the application is
    loaded in pieces , means differnet parts os the same page are
    loaded in differnet timng and the whole page is not loaded at once
    so how it can be.
    Thanks,
    KTA

    One way would be to hide the rendering behind some splash
    screen. ViewStack would be suitable. In this case, you would want
    to set creationPolicy="all".
    Tracy

  • How many photos can you load into Organizer and Editor

    How many photos can you load into Organizer and Editor at one time.  I receive the error message, "Unable to Import Files", which says "You exceeded number of files that can be selecteed and imported at once...."  What is the number?  Secondly is there a way around this for either the Organizer or Editor to work on thousands of photos at the same time?
    Thanks

    I have never heard of this particular limit before.
    Please understand, this appears to be the limit you can import into the Organizer at one time -- you can have as many photos as you want in the Organizer; but apparently you have to import in batches rather than all at once.
    I don't think it applies to the editor; and I can't imagine wanting to have more then a few files in the editor at any one time ... even if you could open 2000 photos in the editor at once, what sense would that make?

  • Forgot icloud password, how to get it recover without any question and also alternative email becuase someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

    forgot icloud password, how to get it recover without any question and also alternative email because someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

    I'm sorry, but I know nothing about iCloud email. I stayed away from iCloud email and only use iCloud for limited purposes.
    But take a look at this discussion and read the response from randers4. He is one of the iCloud experts in the Apple Support Communities.
    https://discussions.apple.com/message/24358339#24358339
    If that doesn't help, you might be better off posting in here where there are other more knowledgable iCloud users.
    https://discussions.apple.com/community/icloud/icloud_on_my_ios_device

  • I have uploaded photos from the past and they are grouped by dates.  How do I seperate those photos into their own folder/album so that I can easily identify the contents.  Also, what is the difference between Album, Smart Album and folders?

    I have uploaded photos from the past and they are automatically arranged by date.  As a result, there are many events grouped into one library/event/folder/album (not sure of the proper terminology) I'd like to separate them into folders/albums/smart albums so that I can easily identify the contents.  How do I do that and do I delete the originals?

    It would be good to take the tutorials and learn iPhoto - these are for the previous version but the concepts are the same and much of the command is the same - and it would be a worthwhile investment of time to take the iphoto tutorials - http://www.apple.com/findouthow/photos/ - they are very helpful and will save you a lot of time and frustration. - also the tutorials in iPhoto Help will be helpful - while iPhoto is easy and intuitive it does have a learning curve and it will save you time and pain if you spend a few minutes learning the basics
    as to organization - events are generally time based and are the basic automatic organization - you can merge and split them to make them work better for you but they are not a good way to do detailed organization - best to leave them time based
    albums are logical things that contain photos and are just pointers to the photo in the event so they take no extra space and all changes to a photo anywhere are reflected everywhere
    Smart albums are the same except they are automatically filled based on the criteria you set when you create them
    Folders are containers that you create and a folder can contain albums, smart albums or other folders so they are a big help in organization - like a vacation folder that holds folders for France, USA, China with each of thos folders holding albums of photos from the country
    LN

  • How can I increase the font and icon sizea little in Firefox 7

    I have been using Firefox for years. With the change to Firefox & , and using the same glasses, I have to crane my neck forward to read the text. This is a new problem starting with Version 7. I do not want to increase the font and icons very much but they need to be a little bigger. Can this be done?

    -> [[How do I use Zoom?]]
    * press '''CTRL + +''' to '''Zoom In'''
    * press '''CTRL + -''' to '''Zoom Out'''
    * press '''CTRL + 0''' (zero) to '''Reset Zoom'''
    Check and tell if its working.

  • How many applications can be installed?

    I have a medical users that uses Epocrates, Tarascan, Clinical Consult, and Sandoth.
    The phone 8330 gets slowed down and I am assuming this is a memory problem.  So i need to confirm this so i can recommend a diferrent platform for her if necessary.
    How many apps can be loaded in addition to the stock apps?
    Thanks.

    Hi and Welcome to the Forums!
    Sorry, but there really is no number that can be given in answer. It is a function of the size of the apps that are installed...larger apps will result in fewer total being able to be installed. Smaller apps will result in a larger quantity. There's no way to say what that number is since it's not fixed. Here's an article that discusses qualifying low memory situations:
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15345&sliceId=SAL_Pub...
    Perhaps it'll be helpful in your evaluation.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can I keep business email and personal email seperate?

    I have both enterprise server business email, and a personal email account (bellsouth.net), setup on my 9300.  The enterprise business email and my phone log post under my regular "messages" icon.  The personal email appears under both the regular message icon and a 2nd message icon (envelope with a small globe). 
    I would like to:
    1. keep my business and personal email accounts completely seperate under different icons.
    2. discontinue logging my phone calls under the "messages" icon.
    3. have it check my personal email only when I request it to, not automatically.
    Can someone help with this?
    Thanks in advance,
    Jay.
    Solved!
    Go to Solution.

    See below in red.
    mrjay40 wrote:
    1. keep my business and personal email accounts completely seperate under different icons.
    Open your Messages folder > Options > Inbox settings and you'll see the mailboxes to include in your main folder, and those to keep separate from your main folder.
    2. discontinue logging my phone calls under the "messages" icon.
    Open your Call Log by pressing the green dial button > Options > Call Logging and disclude any logging.
    3. have it check my personal email only when I request it to, not automatically.
    Not possible. RIM's BlackBerry email is push, and not pull. You can't set a schedule or do it manually.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to restric the use of Business Area and Plant in PTC module

    Hi Expert,
    I am facing a problem with restricting the use of Business Area and Plant in PTC module.
    In this project we are trying to controle the user access or transaction as per the Business Area and Plant.
    We have applied same authorisation in the PTF module.
    Please help me if there is any authorisation object which give Plant and business area restrictions for all the transactions.
    Note: We have already inserted two authorisations object manually -
    1) F_BKPF_GSB
    2) A_IMPR_GSB
    but it's not working, is there any other way to restrict all the trasactions as per the Business Area and Plant.
    Regards,
    Venkatesh

    Hi,
    have you done OMJ7?
    Anyway you can assign plant to Branch and restrict by Validation rules (GGB4)
    Regards

  • Can I increase menu sizes and fonts without lowering my resolution?

    This is my first desktop Mac ever and its a huge shock to have the menus and fonts so small. I thought my having a large 27" display that its going to be easy to see everything. 
    At the same time I do not want to lower my resolution as i feel it defeats the purpose and I am also a photographer that needs to have the best resolution.  I am okay with hitting comm+ to make applications bigger but the menu bars and applications I use tend to be much smaller than Im used to. Even a word doc on Pages opens up extremely small to where nobody can read it. I am 32 with perfect vision and its making hard to read.
    Im just wondering and hoping that there is something I can adjust and since Im new to Mac dont realize yet.  If not, than thats pretty disappointing and will start to wonder if i should have bought something else
    I am open to downloading 3rd party stuff if it makes it do what I want it to.
    Thank you!

    Thanks for your suggestions Paul_31 and Strawb268 which, I agree does make a difference to the menu text size but at reduction of screen definition and clarity which is, after all, one of the main reasons I bought the iMac in the first place.
    I've read elsewhere since making the initial post that the Apple engineers don't like a larger font.  Maybe when they get a bit older they will wish they had made that option available!
    I really hope that an option for changing the fonts in menus is included in a future upgrade of Mavericks.  I really don't want to have to go back to a Windows PC to resolve such a simple issue.

  • How can I hide certain apps and also prevent apps to be deleted without my permission?

    I have a young daughter that watches movies and plays games on my itouch.  I love that she enjoys it, but sometimes while using it, she goes to apps that are not appropriate for her, and also she accidentally deletes apps.  Is there some kind of parental control...or just any feature that can hide the apps I don't want her to go on...and also something I can do to prevent her from accidentally deleting apps?  Thanks!

    You can turn restrictions on that keep her from deleting apps. As for hiding apps, I don't know if that's possible. You could hide the apps in a folder wouldn't have interest in such as a news or utilities folder if she's playing games and watching movies. Hope this helps.

  • Can anyone guide me how to sync sms on iphone to pc and also what setting need to be done to make sure sms remain in iphone indefinitely - need to keep record for work purpose. thanks.

    Need help from the expert on how to sync sms on iphone to pc and how to make sure that sms on iphone is not being deleted - need to keep sms for office record purpose

    You mean take the cover off of the iPhone, to look inside?  I'd recommend against it.  Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
    Other than that, any repair/service options are going to cost money.  You might want to see if a wireless carrier will let you get a new contract & phone.
    Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider?  Did I understand that correctly?

  • Can you backup on icloud and also sync to your computer?

    Can you backup an iPhone 4s to icloud and also sync to a computer if you wanted to?

    Yes.

  • How many applications can I run simultaneously?

    I just bought a new MacBook Air after owning a white Macbook for the last four years. I used to push that pretty hard, but I feel I'm still habituated towards quitting applications when I'm done with them, rather than keeping everything open.
    With the new MacBook I have two user accounts that I'm constantly switching back and forth between, and I run something like ten apps in each. Mail, iChat, Reeder, Safari, iWork, Skype, Twitter, iCal, iTunes, Grapher, and software called TestGen which I use to make worksheets and tests for my students is in my user account for work, and Mail, Ichat, Reeder, Skype, Twitter, iCal, iTunes, and Safari in my personal account. On the Macbook I used to quit out of the account before logging into another one, but so far the Air seems to handle both being logged in at the same time. Is this level of usage fairly normal?
    If most of the apps are in the background most of the time and none of them are particularly processor heavy, will this level of usage have a drastic negative effect on battery life?

    Idle applications reside in RAM and should not impact on battery life.
    Each users' environment and useage varies.
    Only you can answer your own question by seeing how long your battery goes.

  • How java application can access other java application

    Hi everyone,
    Please help me, I need to know how I can make my java program,
    specifically a servlet, access other java application continuously running a single instance in java virtual machine, and vice-versa.
    thanks in advance

    A java application is just a bunch of classes with one designated as a main class. You can simply ensure the classes are available to the server's jvm and then load and run the "external" program as part of the servlet process.
    If you have full access, and which external program is to be run, you can simply import it in your source.
    If your don't have the details at run time use the java.reflect.* stuff to load and run the class dynamically.

Maybe you are looking for

  • My Mail emails no longer show up once I click to highlight.

    I used to be able to click once on an email and then see the body of the email that fits in the window.  That no longer works.  Now I have to double click and open the entire email to get any view of it.  Thought it might have been some format change

  • Bapi to create purchase order

    Hi Experts,                 I need to find a bapi to put purchase orders using co08.Please let me know if some bapi or function module exists there for the same. Thanks in advance

  • Problem in BEX Analyzer

    Hi Gurus, *Sales Query 1     * *CUSTOMER ID     * *MATERIAL ID     * *Key Figures     * *SALES REP ID     * *No Applicable Data Found.     * Could you guys please help me to solve the above problem in BEX when excute query. No data is showing in BEX

  • Drag and drop to Collection doesn't work

    I have successfully created a Collection but cannot add to it by dragging files from the grid view as suggested in Help. There does not seem to be a menu command to do it either so I am a bit stuck. I am using 1.3.1 on a PC running XP. I have tried i

  • "Your video is turned off" on Skype for Mac

    Recently, my iMac is displaying "Your video is turned off" when I try to videoconference with some other Skype users. I have Skype 6.3 installed. My wife is overseas for 6 months, and she is using a MacBook with Skype 2.8 installed. She refuses for p