How to restric the use of Business Area and Plant in PTC module

Hi Expert,
I am facing a problem with restricting the use of Business Area and Plant in PTC module.
In this project we are trying to controle the user access or transaction as per the Business Area and Plant.
We have applied same authorisation in the PTF module.
Please help me if there is any authorisation object which give Plant and business area restrictions for all the transactions.
Note: We have already inserted two authorisations object manually -
1) F_BKPF_GSB
2) A_IMPR_GSB
but it's not working, is there any other way to restrict all the trasactions as per the Business Area and Plant.
Regards,
Venkatesh

Hi,
have you done OMJ7?
Anyway you can assign plant to Branch and restrict by Validation rules (GGB4)
Regards

Similar Messages

Business area and plant

what is the difference between business area and plant although we can treat plant as a business area

Plant & Business area are 2 different kind of entities managed by FI & MM
Business area is different lines of operations of a Company. We can create business areas product wise, geographical divisions etc for which we would like to have internal reportings in Finance.
Plants are created in the Logistics (General) module & are assigned to the company code. The R/3 System uses a combination of plant and division to assign the relevant business area.
You can refer below link for more understandings,
[Business Area and Plant |http://forums.sdn.sap.com/thread.jspa?messageID=7887328#7887328]

How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013

Folks,
How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013
Thank you.

Hi,
You can deactivate the business process itself if you do not want at all. So that the header will not available for the entity.
Regards,
Priya

What is the impact of business area and cost center in the sales document

Hi all
I have small doubt regarding what is the impact of bussiness area and cost center in the sales document... what is the uses of these (bussiness area, cost center) is help full for sd module
can any one reply plz....
Thanking you

Hi,
Business Area determines where the revenue should be allocated when you sell a material or a service.
For eg: If your customer is in say Mumbai and he is ordering for a service in Delhi (say DIAL - Delhi International Airport Limited) then based on the terminology.
Your customer would belong to B Basis Business Area - WHERE THE REVENUE IS COMING FROM or WHERE YOUR CUSTOMER BELONGS TO (SALES OFFICE).
Whereas your DIAL sales will belong to A Basis Business Area - WHERE THE REVENUE IS GOING TO.
Cost Center would determine where your allocate your cost to.
Say Rounding Off can be used as a cost element, because some sort of revenue is lost when figures are roudned off..
Hope it clarifies your doubt.
Reward points if satisfactory
Regards
Ravi.D.Mansharamani

How to define the size of report area and its elements?

How can I define the report area size and its elements? And how can I define that for each printed paper, the details area will repeat horizontally or vertically?
Is there any way to change the measuring units?
Are there any difference between Crystal Reports that is bundled with Visual Studio 2005 to the standalone version that don't allow me doing what I need?
Thanks.

Hi Juliano,
I hope this is what you had in mind...
1. File / Page setup: set your paper size, portrait/landscape and margins.
2. Section Expert: the page header &footer sections are 'locked' in that each page will have the space indicated dedicated to these sections; report header & footer - this is the space dedicated on the first and last page of the document. The remaining space available will be used up by the Details section.
I'm not sure how you can get the Details to print verticall vs horizontally - except maybe with cross-tab format.
3. Measuring units: is this for the ruler? This is pulled from your computer settings.
The rest I'm not sure about but I hope this is enough to get you started!
Heather

How to change the Package of planning area and datasource to be transportab

Hi every body,
I av created a datasource for the xxx planning area and saved in $tmp which is local package and cannot be transportable .and i would like to transport the planning area along with the data source.But before transporting the planning area along with the data sourse i av to change the package of the data source.I am not able to understand where should i change the package of the planning area and datasouce.
Can any body help me out of this problem.
Can be rewarded.
Shashi

Hi alaxander,
Thanx for your reply but before tranporting a datasource i av to transport the planning area bcoz it is the source.so how can i change the package of the planning area which is in $tmp (local object).
Regards,
Shashik

Using Business Area and Profit Center Accounting with New GL functionality

Hello,
We are Public Sector and using ECC 6.0, we have been using Business Area with Fund Management. We also use Special Purpose Ledger with Document splitting. Before migrating to New GL functionality, we want to understand
-     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
-     If we activate Profit Center Accounting before migration, how will it work with the splitting process?
-     If we migrate without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
Thanking you

Hi Sachin,
Thank you for the reply, we want to know that
-     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
If we decide using Profit Center Accounting with Business Area with New GL functionality how we should do it
-     should we activate classical Profit Center Accounting before migrating to New GL functionality, if we do this how will it work with the splitting process?
-     If we migrate to New GL functionality without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
Thanking you
Tipu Khan

Can anyone help me what is the use of business and proxy service in osb?

Hi,
I am new in Osb what is the use of business service and proxy service in osb.
I know little bit proxy service is used for actual message flow. I saw some project proxy service invoking the (using service callout,routing and publish) service,but the wsdl of the services of the proxy and business service is same.
Please can anyone explain the flow while executing through soapUI?(that means it will hit 1st business services or proxy service)
I have this project structure
business service
1.reference.biz----> this is the wsdl of ex:reference.wsdl
2.external.biz----> this is the wsdl of ex:external.wsdl
proxy service
1.referece.proxy--->this is the wsdl of ex:reference.wsdl(in this proxy we are routing to reference.biz proxy service both contains same wsdls why?)
xqueries of request and response.
Best Regards,
Raju.
Edited by: 996674 on Apr 2, 2013 10:53 PM

Hi Raju,
Proxy Service - It is the starting point of you OSB application which deal with receiving messages, inducing logic in it like transformation, if-else, replace, java call outs,etc. You can put in your program logic here and then invoke a business service to route it to your Database or to any other queue as per your requirement.
Business Service - It is generally used for routing purposes, like inserting the input in your Database or sending it to a different queue or BPEL process, etc..
Cheers,
Rit

Business area and Sales organisation

Can any 1 of u tell me the difference btw Business area and Sales organisation

Dear Venkata Krishnan
Business areas are primarily used to facilitate external segment reporting across company codes, covering the company's main areas of operation (product lines, branches).
You can assign all balance sheet items, such as fixed assets, receivables, payables, and material stock, as well as the entire P&L statement directly to business areas. You can only assign banks, equity, and taxes manually to business areas indirectly. For this reason, it is not possible to create the legally-required financial statements and tax reports at business area level. Financial statements at business area level are therefore only suitable for internal reporting.
Sales Organisation is an organizational unit subdividing an enterprise according to the requirements of Sales. It is responsible for selling materials and services.
A sales organization can be subdivided into several distribution chains which determine the responsibility for a distribution channel.
Several divisions can be assigned to a sales organization which is responsible for the materials or services provided.
A sales area determines the distribution channel used by a sales organization to sell a divisionu2019s products.
thanks
G. Lakshmipathi

Business area and profit center

plz can anyone explain me what is the diffrence between business area and profit center.

Business Area is a type of organizational unit structure, primarily used to facilitate external segment reporting across company codes, covering the company's main areas of operation. Business Areas run across company codes. The relationship is n:n. Business Area is part of FI.
Profit Center is also a type of organization unit structure, used for management/ internal controlling purposes. Dividing the company up into profit centers allows one to analyze areas of responsibility and to delegate responsibility to decentralized units, thus treating them as companies within the company. The profit centers also run across company codes. The relationship is n:n. Profit Center Accounting is part of Enterprise Controlling.
While it may look apprantly that both Business Area and Profit Center do the same kind of analysis and reporting, with in SAP internal architecture they are kept in different modules and different tables.
SAP Note 321190 provides the difference betwen Business Area and Profit Center, which you can get from SAP Service Market place.
SAP has maintained Business Area from 4.6B onwards, while there are enhancements happening in Profit Center side.

How to get the size of all InfoCubes and DSO's?

Hi all,
My client wants a complete list of all InfoCubes and DSO's in terms of size (no records but KB). This list of the Cubes / DSO's gives us a picture of the used storage per Area and can be charged. Iu2019ve seen some threats and looked into the possibilities of ST14 and DB02. ST14 provides the ideal list but with a restriction for the top 30 InfoCubes and the top 30 DSO's. Does anyone know how to get such a list for all InfoCubes and DSO's?
Thnx in advance,
Henk.

Hello Henk,
while I am searching for some performance problems in our BI, I tried to look through the new DB02 of BI 7.0. And there is a function which helps a lot creating lists of Cube, DSOs and so on:
Start DB02
On the left side find SPACE -> Additional Functions -> BW Analysis
A Doubleclick will give you a broad survey of the current memory disposition regarding BI/BW objects.
In the BW Area "Cubes & related objects" you can find Infocube E- and F-Facttable. Depending on the Compressed state of your cubes you will find more data in E or F. Just doubleclick on one of these Entries. In my environment currently F-Tables are more effective.
You will then get a list of all Infocubes with size.
You will have to this for E and F Tables and some up over the Infocubes. But, because this will show only the Cubes and not the partitions of the cube it will be much easier to handle than DB02OLD.
Perhaps this helps, because you did not mention your BW/BI release.
Kind regards,
Jürgen

Table name having relationship between Business area and Profit Center

Hi guys,
Can you tell me the table name showing the relationship between Business area and Profit Center in fb60 transaction.
thnx
hema

HI.
BSEE u2013GSBER Business area.
BSID-PRCTR Profit center
Regards.
jay

Difference between business area and costcenter

Hi All,
Could u pls let me know the differences between Business Area and Cost Center.
Awaiting ur valuable responses.
Thanks & Regards
Chennuri

Hi,
i am giving a realtime information on business areas and cost centers.
For our company we have 25 branches. in sap we treat all of our branches as a seperate business area. the reason why we maintain business area. at the month end or year end financial statemensts are generated on company code basis and business area base. so we consider branches as a business area.
Cost center is like a cost object.
Hope this is clear,
Regards,
Sankar

LINK BETWEEN BUSINESS AREA AND MATERIAL NUMBER

Hello EXPERTS,
I have a report based on a custom table .The custom table contains company code, materials and their date run as primary keys.
In the selection screen I am having one field business area, based upon the value entered in the selection screen in business area field I have to retrieve the corresponding materials.
I want to know the relation between business area and materials ( resp. tables and primary keys)
Plz any one guide me on this ...
SRI

hi ARS,
Can u be more specific
based upon the business area I have to retrieve materials... the report which I generated is based upon only one custom table. In selection screen I am having business area field but it is not existing in the custom table...
can any one guide me to solve this problem...
SRI

Link of Business Area and Company Code

hii
from which table i can find the link of Business Area and the Company Code....
thanx in advance
abhishek

FILCA table
RCOMP and RBUSA

How to restric the use of Business Area and Plant in PTC module

Similar Messages

Maybe you are looking for