How i can take a field of report for use it in query?

i hve a table where bills of customer are ready i simply take it on report by select statement.all bills are ready for print.now problem is that i need history of bills for every customer at it's own bill.when i give self join for history, it also add other customer history .there is any possible way that take customer id(report field) from report and search it's records . plzzzzzzzzzzzzzz

i hve a table where bills of customer are ready i
simply take it on report by select statement.all
bills are ready for print.now problem is that i need
history of bills for every customer at it's own
bill.when i give self join for history, it also add
other customer history .there is any possible way
that take customer id(report field) from report and
search it's records . plzzzzzzzzzzzzzzmay be you can use a child query and create a data link between
the original query and child query on customer id column.
I mean write a child query for searching records on customer id and then link
this customer id with your already existing query. I think this will solve your problem

Similar Messages

  • How i can take all record that start for Epi using a select?

    How i can take all record that start for Epi using a select?
    exemple
    select objnr from jest where objnr = 'Epi*'  -
    so don't go

    Is case important? Can it be "EPI"?
    I think case is important, so do it like Shakir showed you, but put it in upper case.
    Rob
    Message was edited by:
            Rob Burbank

  • How we can add custom field in standard report 2kee.

    Hi,
    How we can add custom field in standard report 2kee.
    I need one extra field to add in 2kee report for the same is there any customization req.
    Regards
    Ravi

    Ravi,
    Which extra field do you want to add or see?  Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
    There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
    Nonetheless, if the field you want to add does not already exist, then yes you can do customization.  Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
    Have your abaper add the said field in the program or why not just create a query to pull the report?
    Elias
    Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

  • How can I activate drill down report for planned line items please urgent?

    Hi Everyone,
    Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
    Kind regards
    Arvey.

    Hi
    It is based on the reports attached in the Report Group - TCODE: GR53
    In the Report Group screen
    Press CONFIGURE – This is to attach any Drill Down reports.
    Press the “Insert Line” icon
    As is the screen may be used to insert a Report Writer report group. To add an ABAP, press “other report type”
    Double click on “ABAP Reports”
    Enter the name of the ABAP and ENTER
    <b>RCOPCA08                       Profit Center: Plan Line Items</b>
    VVR

  • How We Can Change Page Size During Report Run Time

    Hello !
    How We Can Change Page Size During Report Run Time .
    How can we stop to change the column name when we amend a sql in report data model.
    Thanks !
    null

    hello sohail
    1. question - i'm afraid this cannot be done ... bit in report 6 and newer you have posibility to divide your report in 3 parts (former header, body, trailor) and each part can have diferent page siz, orientation , ...
    2. question - best is give each column in your statements in one report diferent alias. when you have to chnge something, alias will remain same ...
    try this: select 1 as fist_column, 1 as second_column from dual
    hope this helsp

  • How i can ristrict my BI Publisher report in Dashboards.

    Dear All,
    How i can ristrict my BI Publisher report in Dashboards.
    I have different branches in my report .
    I have to send my report split by branches and have to give security to that branch user.
    Is it posible in BIP or i have to do in Data Base Level.
    I need more information on dashboards
    Regards
    Subbu..

    Hi Subbu,
    Apology for delay in reading your post.
    Your needs and their solution are,
    'split by branches ' - use bursting capability of BI Publisher
    'have to give security to that branch user' - make out the report in specific folder and dashboard in BI Dashboard. Then give role based and grouped access to users to this Dashboard. For this navigate in BI Application to Settings > Admin > Manage Presentation Catalog. here you can setup dashboard specific security.
    Cheers

  • HOW WE CAN VALIDATE A FIELD THAT SHOULD NOT BE SPECIAL CHARACTER?

    HOW WE CAN VALIDATE A FIELD THAT SHOULD NOT BE SPECIAL CHARACTER?

    data : v_abcde like sy-abcde,
             v_num like '0123456789',
              v_data(60) type c.
    start-of-selection.
    v_abcde = sy-abcde.
    concatenate v_abcde v_num into v_data.
    if ur field co v_data
    else.
    message.
    endif.

  • In layout  how we can define screen field ie customer no -------- to ------

    hi,
       in layout  how we can define screen field ie
                    customer no -
    to -
                     my screen should be like this?
           reply me soon.

    we cannt able declare select-options in module pool program .But we have ranges
       so delclare two varibles
    DATA:  v_kun_low LIKE zcust-kunnr ,
           v_kun_high LIKE zcust-kunnr.
    RANGES r_kunnr FOR zcust-kunnr  .
       in PAI
             CASE SY-UCOMM.
                WHEN 'FCTCODE'.
                 r_KUNNR-low = v_KUN_low.
                 r_KUNNR-high = v_KUN_high.
                 r_KUNNR-option = 'BT'.
                 r_KUNNR-sign = 'I'.
             APPEND r_budat.
    in screen designing
       ie layout>f6>get from program fields

  • How we can take screen shot

    can any one help .....!
    how we can take screen shot in SAP B1B

    Hai Sampath,
    Just open the Screen you want to take screen shot and press Print Screen Button in your Key board. Then Open the Word Document and Paste the Screen shot you have taken.
    Regards
    Shrirangaraaja.S

  • My iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    my iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    Sea water and electronics don't mix.  The salinity fries the internal circuitry of the phone. Your phone is toast.
    Certainly the user of any device which can be lost, stolen, or dropped in the sea would be smart enough to have had the data backed up, rght?  Your photos and numbers should be safely backed up on your computer or in the cloud.
    If you didn't do this, there's no way to recover those data now.  Backups are meant to be done BEFORE disaster strikes, not after.

  • How I can take out a dvd I insert. The ejecut command is not responding

    I insert a DVD to watch videos (version DVR) it doesnt play. How I can take it out if the command "ejecut" its not responding

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
    1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
    2. Press the Eject button on your keyboard.
    3. Click on the Eject button in the menubar.
    4. Press COMMAND-E.
    5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
         /usr/bin/drutil eject
    If this fails then try this:
         Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
    <Edited by Host, removed duplicate information>

  • How we can take each and evry users back up

    hi,
    we are using SAP B1 2005 PL 40
    how we can take back up for each and evry users.
    how we know the memory for single
    transaction.when users raising single transaction
    how we can knw the memory for that transaction.

    Hi Sampath,
    if you wan't to use "Transactions" you can use
    oCompany.StartTransaction
    this give you the possibility to use
    oCompany.EndTransaction(wf_RollBack)
    when you want to undo your changes.
    lg David

  • How can I get the elapse time for execution of a Query for a session

    Hi ,
    How can I get the elapse time for execution of a Query for a session?
    Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
    Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
    Thanks in advance.

    Hi
    You can use the dbms_utility.get_time tool (gives binary_integer type value).
    1/ Initialize you time and date of beginning :
    v_beginTime := dbms_utility.get_time ;
    2/ Run you procedure...
    3/ Get end-time with :
    v_endTime := dbms_utility.get_time ;
    4/ Thus, calculate elapsed time by difference :
    v_elapsTime := v_endTime - v_beginTime ;
    This will give you time elapsed in of 100th of seconds...
    Then you can format you result to give correct print time.
    Hope it will help you.
    AL

  • How to Supress 'Not Assgined' in the Report for a char

    Hi,
    The BI Version i am working is 7.0.
    WHat are the settings i have to make in Query for the below requirment.
    The Characterstic Value in report should be blank if no value is assiged to it....right now it is displaying as 'NOT ASSIGNED' my requirment is to display blank if there is no value isted of not assigned
    How can i achieve this
    Thanks

    Hi,
    To achieve this issue, we need to replace the value of ‘#’, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu. Click on the ‘Object Overview’ to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
    Now you will be able to see the object overview on the right side of the screen. Note the field names which are necessary and go to SE11 to view the contents of the selected table.
    Now click the execute button or press ‘F8’ to view the records.
    Now go to Tcode: SE38. Create a source code and give some program name for that source code.
    Tocreate a program here in SE38, you need to have access key. If you don't have the same, contact BASIS for this.
    Now write the below code for that particular table(Characteristic) in which you want to change the value ‘#’ to description ‘Blank’. In the below source code, we are updating particular table, setting the field as ‘Blank’ where it is null or no value. Here the field will automatically get updated to ‘#’ if there is no value or null.
    update /BIC/PXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXX is null or /BIC/ZXXXX = ' '.
    if sy-subrc eq 0.
    write 'successful'.
    commit work.
    else.
    write 'unsuccessful'.
    endif.
    Also find the below thread which may help u...
    Replace  *  with blank in transfer rule.
    Hope this helps u...
    Regards,
    KK.
    Edited by: koundinya karanam on Apr 21, 2008 7:14 PM

  • Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)

    Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
    Exemple:
    Table1
    Cliente name:
    John
    Client number:
    12345
    Survay number of negative answers:
    3
    Table2
    Questions and answers that were negative:
    Question: How much time where you waiting
    Avaluation: 3 (from 1 to 10)
    Answer: They only called me 1 mouth later
    Can you please help me?

    Hi,
    Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
    In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
    References:
    Subreports (Report Builder and SSRS)
    Add a Subreport and Parameters (Report Builder and SSRS)
    If I have any misunderstanding, please feel free to contact me.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

Maybe you are looking for