How is Opportunity Win Rate calculated

Metrics are not always so easy to figure out.
So is there a list / document that explains how these fields are calculated?
Specifiically how is the Opportunity Win Rate calculated?
Thanks.

Win Rate = ((# of wins) / (# of wins + # of losses))
I believe Win = Closed/Won and Lose = Closed/Lost
Refer Doc ID 565203.1 in metalink for more details.

Similar Messages

  • Creating a rate calculator [was: how do i create this?]

    I want to create a rate calculator on a website with 2 input fields: calling from and calling to.  Here is what i've got:
    CALLING FROM table:
    COUNTRY     $/MIN
    Africa            0.10
    Europe          0.20
    Asia              0.30
    CALLING TO table:
    COUNTRY     $/MIN
    Africa           0.20
    Europe         0.30
    Asia             0.50
    USA             0.10
    Basically to get the rate $/min the CALLING FROM selected country and the CALLING TO selected country will be added together i.e calling from africa to USA would be $0.20/min (0.10 + 0.10).
    - How do i create the database for this? (in access)
    - How do i then create the rate calculator in a webpage? (asp/php)???
    I would really appreciate anyone who will be able to help me in this.
    Thank you very much.
    Natalie
    [Subject line edited by moderator to indicate nature of question]

    Create a database table with 3 columns
    Country
    ToRate
    FromRate
    Populate these values as appropriate.
    Create two drop down menus on your page; FromRate and ToRate.  Populate these with the values (Display value and rate) from the table.
    Then, you could either:
    1) Submit the form to a server side script that adds and displays the values
    2) Use Javascript to add and display the values

  • How is Form Conversion Rate been calculated

    Can anyone help me understand how the form conversion rate been calculated in the Landing Page Activity for Date Range report in Insight? Trying to figure out the conversion rates been measured in this report, so that we can properly interpret the results from below. Thank you in advance!
    Landing page Activity for Date Range in Insight   
    Landing Page
    Total Visits (by visitor)
    Total Page Views
    Total Visitors
    Average Page Time
    Total Form Submissions
    Form Conversion Rate
    my.learning.com/forms
    381
    422
    375
    0:09:25
    28
    100.00%
    Transition | LP
    18
    28
    17
    0:05:53
    2
    100.00%
    GoCool.html
    17
    18
    14
    0:13:09
    56
    77.78%
    Summer Training 2015 Confirmation | EMAIL
    21
    34
    14
    0:08:15
    22
    57.89%
    events.Training.com/forms/ISContactUs
    27
    57
    25
    0:05:29
    21
    45.65%

    Thanks so much for your detailed reply!
    I checked into "Landing Page Activity for Date Range" report again and accidently hovered over "Form Conversion Rate"; it displayed the formula as "Total Form Submissions / Total Form Views". I added that metric to the report and saved locally. Now the Form Conversion Rate does equal to the calculation of Total Form Submissions / Total Form Views; data copied below. However, that formula is different from the one specified in the "Insight_ReportDetails_Guide", which is "Total Submits / Total Page Views").
    Now, here comes the new questions for your help/ideas/suggestions -
        - How come in our "Landing Page Activity for Date Range", the formula for Form Conversion Rate is different from the one listed in "Insight_ReportDetails_Guide"?
        - Can we change it to use this formula: Total Submits / Total Page Views?
        - Which one indeed is the correct calculation for Form Conversion Rate in "Landing Page Activity for Date Range" report?
    Landing Page
    Total Visits (by visitor)
    Total Page Views
    Total Visitors
    Total Form Views
    Total Form Submissions
    Form Conversion Rate
    Landing Page 1
    5
    6
    5
    6
    0
    0.00%
    Landing Page 2
    58
    86
    56
    3
    3
    100.00%
    Landing Page 3
    14
    15
    13
    15
    2
    13.33%
    Landing Page 4
    16
    17
    16
    0
    0
    0.00%
    Landing Page 5
    66
    144
    55
    143
    1
    0.70%
    Landing Page 6
    21
    47
    20
    45
    1
    2.22%
    Landing Page 7
    24
    25
    13
    25
    6
    24.00%
    Landing Page 8
    12
    13
    12
    13
    3
    23.08%
    Landing Page 9
    31
    37
    27
    6
    6
    100.00%
    Landing Page 10
    24
    33
    21
    31
    4
    12.90%
    Thank you very much!
    Xuan

  • In import process,how excise base value is calculated in MIGO

    Hi expert's,
    In import process,how excise base value is calculated in MIGO,with what referance values get add to base value.
    waiting for your valuable response,
    Regards
    V.raj

    hi,
    we Tried with your following reply ! but still not finding exact value in base value .
    (MATERIAL PRICE* QTY IN MIGO * EXCHANGE RATE)
    thanks & regards
    V.Raj

  • How to change exchange rate type for specific pricing condition type

    Hello every one,
    I have a requirement for billing ie VF01.
    currently  all the exchange rate are being calculated with exchange rate type 'M' by default.
    but now client want it should calculate exchange rate with type 'E' for two pricing condition type for all others it should calculate with type 'M'
    Please any body can help me with the exit and code which i can use.
    I have checked exits SDVFX008.
    but how to change exchange rate with type 'E' only for two conditions.
    as changing exchange rate at document header will change exchange rate for all condition type.

    You need to assign KOMK-KURST = 'E', for those two condition types. If it had been item number specific, you could have used USEREXIT_PRICING_PREPARE_TKOMK(RV60AFZZ).
    Do one thing, put a breakpoint on FM 'PRICING' and then do selective runtime analysis.
    Check whether any user exit/BADI/ explicit enhancement are available when condition types are processed in a loop. If nothing is available, try implicit enhancement.
    Link to refer for selective runtime analysis - Runtime Analysis for VOFM
    Also try with VOFM requirements ( not sure whether changing KOMK-KURST is permissable in requirement as normally  we only set sy-subrc values to suppress/allow condition types ). Don't forget to assign requirements against condition types in pricing procedure.

  • How to change exchange rate rounding

    Hello guys,
    our customer requires to have exchange rates rounded to 3 decimal places. For direct FX rates it is not problem. But, the customer also requires to have rounded to 3 decimal places calculared cross FX rates (ie. FX rates calculated by SAP through reference currency) and not to 5 decimal places as offers SAP standard. Can anybody help how to change FX rates rounding policy?
    Thanks a lot.

    Hi,
    This cannot be done by a setting.  The currency rate field has 5 decimals and it cannot be changed.
    There are rounding rules you can set with OB90, but even that is not what you are looking for.
    The only option you have is to not let the cross rate be calculated by the system but is explicity entered or uploaded in OB08.  In this way you can ensure that no rate enters with decimals more than 3.
    Cheers.

  • Opportunity and metrics calculations used in reports

    Hi,
    Need to know how various entities are being calculated in the Opportunity and revenue matrices.
    Eg:- what's the formula being used to calculate Avg. Sales Cycle and Avg. Days in Stage etc.
    Any suggestions will be helpful.
    Thanks
    Nakul

    Hi Nakul,
    I know that for the Sales Stage report that each night when the ETL runs it takes a snap shot of the opportunities and what sales stage they are in (etc), and the Avg. Days in Stage is based off all the snapshots for how many days a opportunity was in a sales stage.
    I’m sorry though I don’t know what the formula’s are that are actually used to figure out 2 two metrics you asked about.
    Hope this helps.
    -Joe

  • How to install win 8.1 pro x64 on MBA mid 2013 (core i7)

    Please help me how to install win 8.1 pro x64 on MBA mid 2013 (core i7).
    Thank you very much for your help.
    Best regards.

    Everything you need to help you is located here: http://www.apple.com/support/bootcamp/

  • HT2492 How do I use the calculator widget in another window?

    How do I use the calculator widget in another window?  For ex: if I want to move the calculator to a window that shows prices of products on a web page.  I used to be able to click on the calculator and use it in another window, before I upgraded to OSX. What am i doing wrong?

    I think you have to bring it back up in widgets in a new window, you can set up a hot corner to make tis qciker

  • Can't figure out how to do a specific calculation

    I have a report that is broken into columns in the detail section.  From the data in that section I need to create a formula that looks something like the following:
    (column A - Column B)/column A
    Now because I have it formatted with multiple columns each column heading is the same field just pulling in different years.
    So even though Column A is 2011 and Column B is 2010 the field is still "TaxYear" for both columns.
    How can I make this calculation happen and populate in another area of the data?  Now the tax year won't always be 2010 or 2011.  But the columns will always be there.
    I hope I am making sense and that someone can help me.
    Thank you in advance,
    Erin

    I suppose so but I won't see it until about 10 am eastern standard time. click on my name to get address to send it to.
    You should know that SAP frowns using this method of solving problems though. Would be better if you post here so all can see.
    Be sure to include info of field names and formulas used.
    Edited by: DebiHerbert on Dec 7, 2010 12:38 AM

  • How to upload win 8.1 from my external to my new ssd on a hp pavillion g-6 2200us

    need instructions on how to upload win 8.1 from my external to my new  ssd on a hp pavillion g-6 2200us.  My hd got fried and I bought an SSD to replace it. I  got the recovery downloads from hps website and dowloaded them to an external.  Now I need to know what to do next.   Is there instructions somewhere? Or can anyone explain it to a novice?

    When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
    Sorry but HP only provides the HP Recovery Manager as part of the factory installation. HP doesn't provide downloads of the HP Recovery Manager or HP Recovery Media and you may need to order HP Recovery Media to return you computer to a factory like state.
    If you didn't create your HP Recovery Media when you first setup your computer, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How to use Win 2012 r2 Server Hyper-V?

    How to use Win 2012 r2 Server Hyper-V? Can we install Virtual OS in new machines(which doen't have any OS)? OR it required any OS in client machine to access Virtual OS of Hyper-V?
    Regards
    Meer Akbar Ali

    Hi Meer,
    In addition , here is a video link about installing OS in VM (it is 2008 but it is  similar to 2012R2 ):
    http://technet.microsoft.com/en-us/video/hh859745.aspx
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to include OSTC.rate in this query

    How to include OSTC.rate in this query,Im using it for crystal report.
    DECLARE @sVAT NVARCHAR(max) 
    DECLARE @sCess NVARCHAR(max) 
    DECLARE @sCST NVARCHAR(max) 
    DECLARE @nDocentry  INT 
    SET @sVAT='1'  SET @sCess='7' SET @sCST ='4'
    SELECT DocEntry
      ,DocDate,VehicleNo,Driver,NumAtCard
      ,Building,Block,Street,City,District,State,Country
      ,Series,DocNum
      ,BTinNo,BCstNo,BCeRegNo,BPanNo,BCeRange,BCeComRate,BCeDivision,BEccNo
      ,Type
      ,CardName,[Delivery Addr]
      ,ECCNo,CERange,CERegNo,CEDivis,CEComRate
      ,PAN,CST,STN
      ,[Deliver At]
      ,LineNum
      ,Dscription,HSNumber,Quantity,Rate,LineTotal,Discount,Vat [VAT],Cess [Cess],Total,GTotal
      ,TotalExpns
      ,MfgName
      ,MFGBuilding,MFGBlock,MFGStreet,MFGDistrict,MFGCity
      ,MCERegNo,MCERange,MCEDivis,MCEComRate,MPAN,MCST,MSTN
      ,SupName
      ,SUPBuilding,SUPBlock,SUPStreet,SUPDistrict,SUPCity
      ,SCERegNo,SCERange,SCEDivis,SCEComRate,SPAN,SCST,SSTN
      , (select substring((select upper(name)+',' from OUBR where isnull(U_SeriesGrp,'')<>'' order by Code FOR XML PATH ('')),1,LEN((select upper(name)+',' from OUBR order by Code FOR XML PATH ('')))-1))[Branches]
    FROM
    SELECT
      /*OBTN.DistNumber*/
      INV1.DocEntry
      ,OINV.DocDate,OINV.U_VehicleNo VehicleNo,OINV.U_Driver Driver,OINV.NumAtCard
      ,CAST(OLCT.Building AS VARCHAR(255))Building,OLCT.Block,OLCT.Street,OLCT.City,OLCT.County+' - '+OLCT.ZipCode[District],OCST.Name State,OCRY.Name Country
      , NNM1.SeriesName [Series], OINV.DocNum
      ,OLCT.TinNo [BTinNo],OLCT.CstNo [BCstNo],OLCT.CeRegNo [BCeRegNo],OLCT.PanNo [BPanNo],OLCT.CeRange [BCeRange]
      ,OLCT.CeComRate [BCeComRate],OLCT.CeDivision [BCeDivision],OLCT.EccNo [BEccNo]
      ,OBTN.U_InvType Type
      ,OINV.CardName,OINV.Address2[Delivery Addr]
      ,CE_CRD7.ECCNo,CE_CRD7.CERegNo,CE_CRD7.CERange,CE_CRD7.CEDivis,CE_CRD7.CEComRate
      ,CRD7.TaxId0[PAN],CRD7.TaxId1[CST],CRD7.TaxId11 [STN]
      ,OINV.U_Address [Deliver At]
      ,INV1.LineNum,INV1.ItemCode
      ,INV1.Dscription,OITM.SWW [HSNumber]
      ,INV1.Quantity,INV1.PriceBefDi Price,INV1.LineTotal,INV1.Price Rate,(INV1.PriceBefDi-INV1.Price)*INV1.Quantity Discount
      ,INV4.Vat
      ,INV4.Cess
      ,INV1.LineTotal+INV1.VatSum Total 
      ,OINV.DocTotal GTotal
      ,OINV.TotalExpns
      ,OBTN.U_MfgName MfgName
      ,convert(nvarchar(250),MFG_CRD1.Building) MFGBuilding,MFG_CRD1.Block MFGBlock,MFG_CRD1.Street MFGStreet,MFG_CRD1.City MFGCity,MFG_CRD1.ZipCode[MFGDistrict]
      ,OBTN.U_MCERegNo MCERegNo,OBTN.U_MCERange MCERange,OBTN.U_MCEDivis MCEDivis,OBTN.U_MCEComRate MCEComRate
      ,OBTN.U_MPAN MPAN,OBTN.U_MCST MCST,OBTN.U_MSTN MSTN
      ,OBTN.U_SupName SupName
      ,convert(nvarchar(250),SUP_CRD1.Building) SUPBuilding,SUP_CRD1.Block SUPBlock,SUP_CRD1.Street SUPStreet,SUP_CRD1.City SUPCity,SUP_CRD1.ZipCode[SUPDistrict]
      ,OBTN.U_SCERegNo SCERegNo,OBTN.U_SCERange SCERange,OBTN.U_SCEDivis SCEDivis,OBTN.U_SCEComRate SCEComRate
      ,OBTN.U_SPAN SPAN,OBTN.U_SCST SCST,OBTN.U_SSTN SSTN
    FROM
      OINV
      INNER JOIN INV1 ON OINV.DocEntry=INV1.DocEntry
      INNER JOIN OITM ON INV1.ItemCode=OITM.ItemCode
      INNER JOIN 
      select
      INV4.DocEntry,INV4.LineNum
      ,CASE WHEN INV4.staType IN (@sVAT,@sCST) THEN sum(INV4.TaxSum) ELSE 0 END Vat
      ,CASE WHEN INV4.staType=@sCess THEN sum(INV4.TaxSum) ELSE 0 END Cess
      from
      INV4
      where
      INV4.DocEntry={?DocKey@} and INV4.RelateType=1
      group by INV4.DocEntry,INV4.LineNum,INV4.staType
      )INV4 ON INV1.DocEntry=INV4.DocEntry AND INV1.LineNum=INV4.LineNum
      INNER JOIN OLCT ON INV1.LocCode=OLCT.Code
      INNER JOIN OCST ON OLCT.State=OCST.Code
      INNER JOIN OCRY ON OLCT.Country=OCRY.Code and OCST.Country=OCRY.Code
      INNER JOIN INV12 ON OINV.DocEntry=INV12.DocEntry
      INNER JOIN OITL ON INV1.BaseType=OITL.ApplyType AND INV1.BaseEntry=OITL.ApplyEntry AND INV1.BaseLine=OITL.ApplyLine
      INNER JOIN ITL1 ON OITL.LogEntry=ITL1.LogEntry
      INNER JOIN OBTN ON ITL1.MdAbsEntry=OBTN.AbsEntry and ITL1.SysNumber=OBTN.SysNumber and ITL1.ItemCode=OBTN.ItemCode
      LEFT JOIN OCRD MFG_OCRD ON MFG_OCRD.CardCode=OBTN.U_MfgCode
      LEFT JOIN CRD1 MFG_CRD1 ON MFG_OCRD.CardCode=MFG_CRD1.CardCode AND MFG_OCRD.BillToDef=MFG_CRD1.Address and MFG_CRD1.AdresType='B'
      LEFT JOIN OCRD SUP_OCRD ON SUP_OCRD.CardCode=OBTN.U_SupCode
      LEFT JOIN CRD1 SUP_CRD1 ON SUP_OCRD.CardCode=SUP_CRD1.CardCode AND SUP_OCRD.BillToDef=SUP_CRD1.Address and SUP_CRD1.AdresType='B'
      LEFT JOIN NNM1 ON OINV.Series=NNM1.Series
      LEFT JOIN CRD7 ON OINV.CardCode=CRD7.CardCode AND CRD7.Address='' AND CRD7.AddrType='S' --Tax Details
      LEFT JOIN CRD7 CE_CRD7 ON OINV.CardCode=CE_CRD7.CardCode AND OINV.ShipToCode=CE_CRD7.Address AND CE_CRD7.AddrType='S' -- Central Excise Details
      WHERE
      INV1.DocEntry={?DocKey@}
    )INVOICE
    GROUP BY
      DocEntry
      ,DocDate,VehicleNo,Driver,NumAtCard
      ,Building,Block,Street,City,District,State,Country
      ,Series,DocNum
      ,BTinNo,BCstNo,BCeRegNo,BPanNo,BCeRange,BCeComRate,BCeDivision,BEccNo
      ,Type
      ,CardName,[Delivery Addr]
      ,ECCNo,CERange,CERegNo,CEDivis,CEComRate
      ,PAN,CST,STN
      ,[Deliver At]
      ,LineNum
      ,Dscription,HSNumber,Quantity,Rate,LineTotal,Discount,Vat,Cess,Total,GTotal
      ,TotalExpns
      ,MfgName
      ,MFGBuilding,MFGBlock,MFGStreet,MFGDistrict,MFGCity
      ,MCERegNo,MCERange,MCEDivis,MCEComRate,MPAN,MCST,MSTN
      ,SupName
      ,SUPBuilding,SUPBlock,SUPStreet,SUPDistrict,SUPCity
      ,SCERegNo,SCERange,SCEDivis,SCEComRate,SPAN,SCST,SSTN

    You're double posting ( how to change join condition in this query ) , stop doing that, since you'll only be distracting and diverting by doing so.
    Take the time to read the SQL and PL/SQL FAQ @ https://forums.oracle.com/forums/ann.jspa?annID=1535, since you're not even mentioning a database version, while 9i {noformat} != {noformat} 10g {noformat} != {noformat}11g...
    Have your DBA trace/tkprof the query, and so on, if you cannot do that yourself.
    And then provide the feedback the volunteers, including Ace (Directors)' s need ( and you were very lucky, from that point of view, I think, from looking at both your posts ;) )

  • What kind of role is Planned Growth in Opportunity Churn Rates of PPM?

    Hello, everyone!
    First, please check the following menu.
    Menu>PiplinePerformance>Options>Default Opportunity Churn Rates
    the field "Planned Growth (%) ".
    I'm looking into the function of Opportunity Churn Rates in PPM and I've found the Default Opptunity Churn Rates is used in Sales pipline chart.
    When I input Planned Growth in Default Opptunity Churn Rates, however the chart view doesn't change any value.
    Does anyone know the function of Planned Growth? If you have any tips, could you please tell me about it?
    Best Regards.
    Miki

    Hello, everyone!
    First, please check the following menu.
    Menu>PiplinePerformance>Options>Default Opportunity Churn Rates
    the field "Planned Growth (%) ".
    I'm looking into the function of Opportunity Churn Rates in PPM and I've found the Default Opptunity Churn Rates is used in Sales pipline chart.
    When I input Planned Growth in Default Opptunity Churn Rates, however the chart view doesn't change any value.
    Does anyone know the function of Planned Growth? If you have any tips, could you please tell me about it?
    Best Regards.
    Miki

  • Exchange Rate calculation not happening for Special GL in FAGL FC_VAL

    HI ,
    Exhcange rate calculation for all reconciliation accoout going on but for specilal gl not happens.
    Could you please tell  me whether system calculates or not for special gl or calculates only reconciliation account in FAGL_FC_VAL

    Its going well

Maybe you are looking for