How long does it take to set up iphone 6 from icloud restore

I am trying to set up my new iPhone 6 plus from the icloud back up I made on my old iPhone 5c.  Its been several hours, everything appears to be on the phone but when I go to settings to try to update the ios, it states I cannot perform the update until the restore is finished.
How long should this process take and how can I tell if there is a problem or if it is just taking a very long time...in other words, how long is TOO long and indicates a problem?
I also cannot perform another back up until this is done so I am concerned about losing data.
thanks.

That all depends on how large the backup is.

Similar Messages

  • How long does it take to charge an iPhone 4S from 0% to 100%? And how long does it last at normal usage with cellular data and 3G switched on?

    I just got a second hand iPhone 4S and just wanna know if what's happening with my battery is normal

    A couple hours to charge.  Most users get almost a day with "normal" use.  Note that this is an average and can vary greatly depending on the user.

  • How long does it take to update the iPhone 4?

    How long does it take to update the iPhone 4?

        Interesting question, beachn! If I understand correctly, you're trying to see how long it will take to update the software/operating system of an iPhone 4. If that's the case, the during of a software update will depend greatly on the speed of your computer and/or your phone. I've seen the process vary from 4 minutes to an hour. If I did not understand correctly, please describe what you mean by update. Thanks!
    Dion M.
    VZW Support
    Follow us on Twitter www.twitter.com/vzwsupport

  • How long does it take to get my X61 checked from water spill?

    Hi,
    I had spilled some water into my X61 yesterday.
    Though I instantly shut it down and try to clean, I was too stupid to try to boot it in ten minutes.
    Not sure if it is "OK" right now....
    Does anyone have the same experience?
    Could you share how long does it take you to have your laptop shipped and checked at lenovo repair center?
    Thanks a lot!

    do you have accidental damage warranty? if you don't then you will incur a hefty bill. The check up should not take more than 5 days including shipping, provided that no parts need to changed, if there is parts that are required, then depending on the parts availability, you could wait up to a month or two. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • How long does apple take to send a motherboard? (From the Us to Europe)

    My new 17'' macbook pro had a problem with its motherboard so apple will send me a new one. Does anyone know how long it will take to arrive at my house?
    Cheers,
    Robert

    In fact, Apple doesn't sell parts directly to end users at all. New Apple parts can only be bought by Apple authorized service providers and Apple's own service technicians. From whom did you order this board?

  • How long does it take to get your iPhone 5 battery replaced?

    For anyone who had their iPhone 5 battery replaced in the replacement program, I was wondering if you could tell me how long this took and what the procedure is. Can you do this at a Genius Bar? I'm probably going to have no more than a few hours to do this between trips and wondering if it takes five minutes or a couple of days.
    Thanks very much.

    The current iPhone 5 battery replacement program has caused some Apple Stores (including all of them in Houston) to run out of spare batteries. They order more, but can take a few days to get fresh stock.
    I went into a store on Tuesday. The Genius ran a diagnostic to be sure my battery was in bad enough shape o qualify. It did, but they were out of batteries, so they put me in line to get one. Today's shipment included a battery with my name on it, so I took the phone back in today. The replacement was complete about 45 minutes later.

  • How long does it take to set up a new ipad from a backup?

    Just bought an ipad mini and decided to mirror my full size ipad onto it so chose the set up option to restore from backup.
    It seems to have some what it needs to do but it gets stuck on step 6 of 6, resoring data.
    Its been doing this for hours now, Im sure it must have a problem.
    Thanks

    This is not a suggestion.  Do not follow it, but I tell you what happened to me a couple of years ago.
    Recovering data from Backup via cable an iTunes to feed a new iPhone with data saved from the old one I was in the same situation: no activity after a long time.
    I disconnected the iPhone, reset it and started again. It worked.
    You will find here a lot of more clever suggestion, I did it on the basis that a Backup could not be demaged by disconnection.

  • How long does it take to create material master data from PO lines?

    Hi ,
    I was wondering if I could use an expert's opinion on the time and effort (FTEs) that goes into cleaning 50,000 PO lines that contain item descriptions to create a clean item master and a (basic) catalog.
    The idea is:
    To remove duplicates, invalid, non recurring/ redudant items
    To create categories and sub categories (Standard - no coding)
    Is there any defined tool and process-steps, not only for SAP but in general? Do consultants do this manually (with Excel spreadsheets) or some other means.
    Any references will be very useful.
    Thanks and regards.

    could be any time from a day to some months, just depends how big the mess is and how detailed the wishlist is and how well you want become.
    Most consultants will do this probably with Excel as they are used to it.
    Mixed tools can speed the process up if the people are used to those tools, or slow it down if they are not and need training before they can start.
    Is it really only the description which will finally be different for some thousand materials that finally need to be created?
    I would start with TAANA transaction, this would give me already an aggregated view on the items, as it can be used to group and count the items by description (and other parameters such as year) so it is  down in seconds  to the number of variations. Means the duplicates are eliminated.
    Then you identify the one-time buys from previous years and remove them from the list (the output of TAANA can be worked on with Excel inplace)
    Now starts the hard work to remove the garbage. This is usually a manual work, looking for typos which made this different from the same item with the correct description. And even identifying duplicates that are totally different written "Elbow - stainless steel" and "Stainless steel elbow" and far apart from each other in your list.
    For this I use Excel with the Fuzzy Lookup Add-in
    Watch some videos on youtube to see how it works, it's great.
    And finally you load the materials with LSMW. If you are experienced with SAP material masters then you know which fields this materials need, they all could be defined as constants and your input file could only have the description, if that is really the only difference, which I actually don't believe. There might be differences in material group, in the unit of measure and usually in the purchasing group too (probably even more fields). And exact those differences in the other fields have to be considered in the cleanup too.
    So, just technically eliminating duplicates and the worst garbage and all the one-time buys and finally load uniformed NLAG materials with just different descriptions could be done in a day. But the experience tells me that this can quickly evolve to a bigger long term project with harmonizing the way how the description will be written, harmonizing units and material groups.

  • How long does it take to wipe an iphone with 14gb data?

    I planned to sell my iphone 3g today so I thought I might as well gave the "wipe" feature a go last night after I had backed up my stuff. Almost 9 hours had passed now and my phone is still stuck at the Apple logo. Does anybody has experience with wiping their phones? Is this normal? I have tried everything to "wake" the phone like holding down the power key and pressing the power and home keys together. I don't suppose I can "fool" the second-hand phones trader with my phone in this state.
    By the way, my iphone is running 3.0 gold master.
    Roderick

    It should not take 9 hours or anywhere close to it.
    Have you tried placing your iPhone into recovery mode?
    http://support.apple.com/kb/HT1808
    If successful, this will require restoring the iPhone with iTunes. If successful, I suggest installing the released 3.0 version instead of the gold master.

  • How long does it take to reconnect back to BT from...

    I've ordered BT infinity which means I have to get my line from BT again, when I ordered, I was given the date of 1st March to connect both the line & infinity with the timeframe of 8am-1pm. However, my current line provider rejected that date, and I got a new line activation date of 8th March, no timeframe(didn't notice this until today). I have manually rescheduled the infinity install for the 8th as well, 8am-1pm slot. As it says on my 'services' page, the line will be activated 'up to midnight', I am worried the infinity guy will turn up, and not be able to install infinity because the line still isn't a BT line.
    Is this likely, and would a call to CS be any help if so?
    TIA, Dave.
    Solved!
    Go to Solution.

    I don't think so. If it's a sim provide (infinity and line on the same order) I'd expect there to be something inbuilt into the system that ensures the telephone side of things is done first thing.
    That's an expectation, not a fact I know of a few people who have migrated back with no problems. But similarly, there have been a few post on here where it's failed. I guess you just need to wait and see!
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How long does it take to get the upgrade code for mountain lion?

    after submitting the online form how long does it take to get the code emailed from Apple?

    sent a complain at around 9:30 PM (PH time) and got a reply at around 11PM. Got the code at around 1PM today.

  • Installing Windows 2003 Server Standard/XP is very slow- how long does it take?

    Hello, I'm looking for some ideas here...  I tried installing Windows 2003 on my newly build computer, but after 3 hours it still wasn't installed, and seemed to just be really really slow, and not frozen.  I ended up giving up and tried putting windows xp on it, but after an hour it still didn't finish installing.  I figure there really has to be something wrong here...  The only thing out of the ordinary is that I'm using 4GB ram DDR2 667.  How long does it take to install windows xp on your system?!?
    Things that I've tried have been:
    disabled hypterthreading
    loaded optimized settings
    changed sata to mode II
    MSI 945G Neo-F Socket T (LGA 775) Intel 945G ATX Intel Motherboard
    Seagate Barracuda 7200.9 ST3160812AS 160GB 7200 RPM SATA 3.0Gb/s
    Intel Pentium 4 650 Prescott 800MHz FSB LGA 775 EM64T
    pqi TURBO $GB (4 x 1GB) 240-Pin DDR2 SDRAM DDR2 667 (PC2 5400) Unbuffered Dual
    POwer: Ultra Xfinity 500Watt ATX +5v +3.3v +12v1 +12v2 -12v +5vsb
    BIOS 1.2
    Optial Drive: Generic Toshiba DVD

    1&3 and 2&4 seem to be working okay,  I've tested all these combinations (this is just plugging in the memory and looking at the cpu in task manager)
    mem1 in slot 1 okay (tested slot 1 okay)
    mem1 in slot 1 
    mem2 in slot 3 okay (test 2gigs in duel channel first set of memory okay)
    mem3 in slot 1
    mem4 in slot 3 okay (tested 2 gig in duel channel second set of memory)
    mem1 in slot 2 okay (tested slot 2 okay)
    mem1 in slot 2
    mem2 in slot 4 okay (tested the second duel channel okay)
    mem1 in slot 1
    mem2 in slot 3
    mem3 in slot 2
    mem4 in slot 4 high cpu 
    mem3 in slot 1
    mem1 in slot 2
    mem4 in slot 3
    mem2 in slot 4 high cpu 
    I upgraded to the latest bios, no luck...  I haven't run any extensive memory tests, but through the tests i did, it seems that the memory is okay.  Given these tests do you think it is more likely a problem with the motherboard running 4 slots?  Or maybe some power issue, where the  4 sticks of memory are not getting enough power to work right.
    The power supply I am using is Xfinity 500W
    +5V/30A +3.3/30A +12V1/16A +12V2/18A -12V/0.6A +5VSB/2.5A
    Thanks for your feedback..

  • How long does it take to implement HR Mini Master

    I realize there are many variables, but typically how long does it take to configure HR Mini master (3 weeks, 3 months, 6 months, etc...)? We would like to upload from Peoplesoft and continually have it updated.
    best regards,

    Hi,
    If you have all information/data available from client, then configuring Enterprise structure, Personnel Structure, Actions, Infotypes, time related setting and integration of other modules will take atleast two weeks, but after that testing along with other modules takes time to test complete cycle.  So there is no fix time we can give to client but minimum three weeks.
    All the best,
    Santosh

  • I bought an iPhone 5 from someone, how long does it take for his Apple ID to come off

    I bought an iPhone 5s from someone second hand, he had put it back to factory settings but when I tried to use it it asked for his Apple ID and password, I contacted him to ask for him to delete his id from the phone, how long does it take after he does that for me to be able to set up the phone with my details?

    This is what should have been done:
    http://support.apple.com/kb/ht5661
    If the seller didn't do the above, you need to get the seller to do this. If you don't, you won't be able to re-activate the phone. It will be useless to you.
    I suspect you may have been scammed.

  • HT4623 trying to sign in apple id and password done--now says loading --how long does this take???

    entered id and password --now says loading--how long does this take????

    wilsonfromtx wrote:
    entered id and password --now says loading--how long does this take????
    With regard to what? I assume that since the link connected to your question was from the "How to update your iDevice" kb article, you are talking about seeing this behavior after you updated the iPad.
    So, if that's the case, it really shouldn't take but a minute or so, if it even takes that long. If this has been going on for minutes and minutes, the update process is stuck now. You can try restarting the iPad and see if the iPad behaves normally. That might be all that you need to do to set things right again. If restarting just takes you back to this page loading again, you can try rebooting the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for