How read read the recepient information from a output type ?

Hi all,
There is one output type which has been configured for the APPLICATION V2 which will be triggerred for sending emails .  In the communication we maintain the recepient address whether a distribution list or an external email id.
Can anybody tell me any FM (Function Module) or BADI thought which i can get all the recepients
address depending upon the output application type and sending type as 7 ie SAPOFFICE .
Thanks and Regards,
Syed

I am looking for the same information...Help!

Similar Messages

  • IPhone SDK: UIWebView - How to get the anchor information from  URLRequs

    I was planning to use the UIWebView but i am stumped now.
    When the user clicks on a hyperlink, the web view delegate shouldStartLoadWithRequest is called and it does not contain the anchor information.
    For e.g. if the href is say #01_02. This to a normal browser is a local anchor. The URL in the NSURLRequest contains just the file name information not the anchor.
    In my particular case a anchor can be some other view of the topic which i will generate and keep it ready for the browser at this point. But since i don't get the anchor information it just shows the current page.
    Is there a way to get the original value encoded in the HREF?
    Thanks in advance,
    -TRS

    I may not have understood your question but if you want to pull out the anchor information out of a request, have you tried the fragment property of the NSURL object?
    // request is type (NSURLRequest *); within shouldStartLoadWithRequest
    NSString *fragment = \[\[request URL\] fragment\];
    Usually this will have the anchor without the #, in your case 01_02.

  • How to find the sender information from a IDOC

    Hello Colleagues
    I have a list of IDOCs which are transferred by by ALE and EDI methods, the customer idocs are using EDI and internal buyers use the ALE technology.
    I have to write a report which tells me which was the originating system/ source of the order, so I wanted to know is there a way that I can find the origin system of the idoc message.
    I had a look into EDIDC but the sender port here is a self pointing RFC for the edi messages, any idea how to get the origin system here ?, however the ALE messages gives the correct sender. But in future we are planning to have XI for internal transfer for idoc will that also have the same problem.
    Best regards
    Sujoy

    Hi ,
    you can find receiver system details in partner profile , transaction we20.
    the sender system details are
    port = SAP+your systemID(can be found in login system details)
    EX if i am using ides server(testing server) having system id ESR then port = SAPESR
    partner number u can get by following the path
    sale...>basic settings...>logical system....> assign logical system to client.
    here you can find the logical system which is nothing but your partner number for a particular client.
    Hope this  helps you.
    Thank you.
    Regards,
    Lokeswari.

  • How to reduce the query fetch from TKPROF output?

    Hi,
    Below is my query contains the TKPROF output.Here fetch is too high. How to reduce the fetch from here. And please check the explain plan is good or not?
    SELECT  czci.config_hdr_id,
            czci.config_rev_nbr,
            asoqla.quantity,
             (SELECT
                    node_desc.LOCALIZED_STR
                 FROM   CZ_LOCALIZED_TEXTS node_desc,
                        CZ_PS_NODES ps_nodes,
                        CZ_CONFIG_ITEMS czci1
                WHERE   czci1.config_hdr_id = asoqld.config_header_id
                AND     czci1.config_rev_nbr = asoqld.config_revision_num
                AND    node_desc.INTL_TEXT_ID = ps_nodes.INTL_TEXT_ID
                AND     NVL(node_desc.LANGUAGE,userenv('LANG')) = userenv('LANG')
                AND     czci1.PS_NODE_ID = ps_nodes.PERSISTENT_NODE_ID
                 AND    ps_nodes.DEVL_PROJECT_ID = (SELECT MAX(DEVL_PROJECT_ID) FROM CZ_DEVL_PROJECTS WHERE NAME LIKE 'Control Model')
                AND czci1.PARENT_CONFIG_ITEM_ID IN (SELECT sub_sub.CONFIG_ITEM_ID FROM CZ_CONFIG_ITEMS sub_sub
                                                        WHERE sub_sub.CONFIG_HDR_ID = asoqld.config_header_id
                                                        AND sub_sub.CONFIG_REV_NBR = asoqld.config_revision_num
                                                        AND      sub_sub.PS_NODE_NAME = 'fittings')) fitting_material,
             (SELECT
                    node_desc.LOCALIZED_STR
                 FROM   CZ_LOCALIZED_TEXTS node_desc,
                        CZ_PS_NODES ps_nodes,
                        CZ_CONFIG_ITEMS czci
                WHERE   czci.config_hdr_id = asoqld.config_header_id
                AND     czci.config_rev_nbr = asoqld.config_revision_num
                AND    node_desc.INTL_TEXT_ID = ps_nodes.INTL_TEXT_ID
                AND NVL(node_desc.LANGUAGE,userenv('LANG')) = userenv('LANG')
                AND     czci.PS_NODE_ID = ps_nodes.PERSISTENT_NODE_ID
                 AND    ps_nodes.DEVL_PROJECT_ID = (SELECT MAX(DEVL_PROJECT_ID) FROM CZ_DEVL_PROJECTS WHERE NAME LIKE 'Control Model')
                AND czci.PARENT_CONFIG_ITEM_ID IN (SELECT sub_sub.CONFIG_ITEM_ID FROM CZ_CONFIG_ITEMS sub_sub
                                                        WHERE sub_sub.CONFIG_HDR_ID = czci.CONFIG_HDR_ID
                                                        AND sub_sub.CONFIG_REV_NBR = czci.CONFIG_REV_NBR
                                                        AND      sub_sub.PS_NODE_NAME = 'tubing')) tubing_material
    FROM    aso_quote_lines_all asoqla,
            aso_quote_line_details asoqld,
            cz_config_items czci
    WHERE   asoqla.quote_header_id = 55774
    AND     asoqla.item_type_code = 'MDL'
    --AND     asoqla.org_id = 2763
    AND     asoqla.quote_line_id = asoqld.quote_line_id
    AND     asoqld.config_header_id = czci.config_hdr_id
    AND     asoqld.config_revision_num = czci.config_rev_nbr
    AND     czci.ps_node_name = 'CONTROL MASTER ASLY'
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.04       0.03          0          0          0           0
    Execute      1      0.00       0.00          0          0          0           0
    Fetch        3      0.09       0.08          0       5100          0          19
    total        5      0.13       0.12          0       5100          0          19
    Misses in library cache during parse: 1
    Optimizer goal: ALL_ROWS
    Parsing user id: 173  (APPS)
    Rows     Row Source Operation
          3  TABLE ACCESS BY INDEX ROWID CZ_LOCALIZED_TEXTS (cr=2161 pr=0 pw=0 time=32425 us)
         40   NESTED LOOPS  (cr=2158 pr=0 pw=0 time=32276 us)
          3    NESTED LOOPS  (cr=2147 pr=0 pw=0 time=32156 us)
          3     NESTED LOOPS  (cr=925 pr=0 pw=0 time=15885 us)
          3      TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=665 pr=0 pw=0 time=13456 us)
       5490       INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=96 pr=0 pw=0 time=1237 us)(object id 3049621)
          3      TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=260 pr=0 pw=0 time=2401 us)
       1094       INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=19 pr=0 pw=0 time=250 us)(object id 3049621)
          3     TABLE ACCESS BY INDEX ROWID CZ_PS_NODES (cr=1222 pr=0 pw=0 time=16249 us)
          3      INDEX RANGE SCAN CZ_PS_NODES_N12 (cr=1219 pr=0 pw=0 time=16211 us)(object id 750095)
          1       SORT AGGREGATE (cr=1211 pr=0 pw=0 time=16125 us)
        209        TABLE ACCESS FULL CZ_DEVL_PROJECTS (cr=1211 pr=0 pw=0 time=15883 us)
         18    INDEX RANGE SCAN CZ_LOCALIZED_TEXTS_N1 (cr=11 pr=0 pw=0 time=68 us)(object id 31504)
          3  TABLE ACCESS BY INDEX ROWID CZ_LOCALIZED_TEXTS (cr=2161 pr=0 pw=0 time=31499 us)
         40   NESTED LOOPS  (cr=2158 pr=0 pw=0 time=31351 us)
          3    NESTED LOOPS  (cr=2147 pr=0 pw=0 time=31215 us)
          3     NESTED LOOPS  (cr=925 pr=0 pw=0 time=15271 us)
          3      TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=665 pr=0 pw=0 time=12441 us)
       5490       INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=96 pr=0 pw=0 time=1230 us)(object id 3049621)
          3      TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=260 pr=0 pw=0 time=2795 us)
       1094       INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=19 pr=0 pw=0 time=264 us)(object id 3049621)
          3     TABLE ACCESS BY INDEX ROWID CZ_PS_NODES (cr=1222 pr=0 pw=0 time=15920 us)
          3      INDEX RANGE SCAN CZ_PS_NODES_N12 (cr=1219 pr=0 pw=0 time=15863 us)(object id 750095)
          1       SORT AGGREGATE (cr=1211 pr=0 pw=0 time=15753 us)
        209        TABLE ACCESS FULL CZ_DEVL_PROJECTS (cr=1211 pr=0 pw=0 time=15452 us)
         18    INDEX RANGE SCAN CZ_LOCALIZED_TEXTS_N1 (cr=11 pr=0 pw=0 time=79 us)(object id 31504)
         19  TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=778 pr=0 pw=0 time=20571 us)
       5816   NESTED LOOPS  (cr=202 pr=0 pw=0 time=8497 us)
         21    NESTED LOOPS  (cr=96 pr=0 pw=0 time=2037 us)
         23     TABLE ACCESS BY INDEX ROWID ASO_QUOTE_LINES_ALL (cr=47 pr=0 pw=0 time=1427 us)
       1058      INDEX RANGE SCAN ASO_QUOTE_LINES_ALL_N1 (cr=9 pr=0 pw=0 time=51 us)(object id 81688)
         21     TABLE ACCESS BY INDEX ROWID ASO_QUOTE_LINE_DETAILS (cr=49 pr=0 pw=0 time=596 us)
         21      INDEX RANGE SCAN ASO_QUOTE_LINE_DETAILS_N1 (cr=28 pr=0 pw=0 time=323 us)(object id 81706)
       5794    INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=106 pr=0 pw=0 time=1424 us)(object id 3049621)

    Hi
    After affed the exist operator i got below output. But it is more than that the previous one.
    SELECT czci.config_hdr_id, czci.config_rev_nbr, asoqla.quantity,
           (SELECT node_desc.localized_str
              FROM cz_localized_texts node_desc,
                   cz_ps_nodes ps_nodes,
                   cz_config_items czci1
             WHERE czci1.config_hdr_id = asoqld.config_header_id
               AND czci1.config_rev_nbr = asoqld.config_revision_num
               AND node_desc.intl_text_id = ps_nodes.intl_text_id
               AND NVL (node_desc.LANGUAGE, USERENV ('LANG')) = USERENV ('LANG')
               AND czci1.ps_node_id = ps_nodes.persistent_node_id
               AND ps_nodes.devl_project_id = (SELECT MAX (devl_project_id)
                                                 FROM cz_devl_projects
                                                WHERE NAME = 'Control Model')
               AND EXISTS (
                      SELECT NULL
                        FROM cz_config_items sub_sub
                       WHERE sub_sub.config_hdr_id = asoqld.config_header_id
                         AND sub_sub.config_rev_nbr = asoqld.config_revision_num
                         AND sub_sub.ps_node_name = 'fittings'
                         AND czci1.parent_config_item_id = sub_sub.config_item_id))
                                                                 fitting_material,
           (SELECT node_desc.localized_str
              FROM cz_localized_texts node_desc,
                   cz_ps_nodes ps_nodes,
                   cz_config_items czci1
             WHERE czci1.config_hdr_id = asoqld.config_header_id
               AND czci1.config_rev_nbr = asoqld.config_revision_num
               AND node_desc.intl_text_id = ps_nodes.intl_text_id
               AND node_desc.LANGUAGE = USERENV ('LANG')
               AND czci1.ps_node_id = ps_nodes.persistent_node_id
               AND ps_nodes.devl_project_id = (SELECT MAX (devl_project_id)
                                                 FROM cz_devl_projects
                                                WHERE NAME = 'Control Model')
               AND EXISTS (
                      SELECT NULL
                        FROM cz_config_items sub_sub
                       WHERE sub_sub.config_hdr_id = czci.config_hdr_id
                         AND sub_sub.config_rev_nbr = czci.config_rev_nbr
                         AND sub_sub.ps_node_name = 'tubing'
                         AND czci1.parent_config_item_id = sub_sub.config_item_id))
                                                                  tubing_material
      FROM aso_quote_lines_all asoqla,
           aso_quote_line_details asoqld,
           cz_config_items czci
    WHERE asoqla.quote_header_id = 55774
       AND asoqla.item_type_code = 'MDL'
    --AND     asoqla.org_id = 2763
       AND asoqla.quote_line_id = asoqld.quote_line_id
       AND asoqld.config_header_id = czci.config_hdr_id
       AND asoqld.config_revision_num = czci.config_rev_nbr
       AND czci.ps_node_name = 'CONTROL MASTER ASLY'
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.02       0.03          0          0          0           0
    Execute      1      0.00       0.00          0          0          0           0
    Fetch        3      0.16       0.14          0      16526          0          19
    total        5      0.18       0.17          0      16526          0          19
    Misses in library cache during parse: 1
    Optimizer goal: ALL_ROWS
    Parsing user id: 173  (APPS)
    Rows     Row Source Operation
          3  TABLE ACCESS BY INDEX ROWID CZ_LOCALIZED_TEXTS (cr=7874 pr=0 pw=0 time=51192 us)
         40   NESTED LOOPS  (cr=7871 pr=0 pw=0 time=50953 us)
          3    NESTED LOOPS  (cr=7860 pr=0 pw=0 time=50729 us)
          3     TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=6638 pr=0 pw=0 time=33183 us)
          3      INDEX RANGE SCAN CZ_CONFIG_ITEMS_N1 (cr=6635 pr=0 pw=0 time=33060 us)(object id 31734)
          3       TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=6536 pr=0 pw=0 time=22873 us)
       1292        INDEX UNIQUE SCAN CZ_CONFIG_ITEMS_PK (cr=5244 pr=0 pw=0 time=15326 us)(object id 3049621)
          3     TABLE ACCESS BY INDEX ROWID CZ_PS_NODES (cr=1222 pr=0 pw=0 time=17483 us)
          3      INDEX RANGE SCAN CZ_PS_NODES_N12 (cr=1219 pr=0 pw=0 time=17411 us)(object id 750095)
          1       SORT AGGREGATE (cr=1211 pr=0 pw=0 time=17266 us)
        209        TABLE ACCESS FULL CZ_DEVL_PROJECTS (cr=1211 pr=0 pw=0 time=16844 us)
         18    INDEX RANGE SCAN CZ_LOCALIZED_TEXTS_N1 (cr=11 pr=0 pw=0 time=122 us)(object id 31504)
          3  NESTED LOOPS  (cr=7874 pr=0 pw=0 time=48203 us)
          3   NESTED LOOPS  (cr=7860 pr=0 pw=0 time=47973 us)
          3    TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=6638 pr=0 pw=0 time=30352 us)
          3     INDEX RANGE SCAN CZ_CONFIG_ITEMS_N1 (cr=6635 pr=0 pw=0 time=30218 us)(object id 31734)
          3      TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=6536 pr=0 pw=0 time=20960 us)
       1292       INDEX UNIQUE SCAN CZ_CONFIG_ITEMS_PK (cr=5244 pr=0 pw=0 time=14224 us)(object id 3049621)
          3    TABLE ACCESS BY INDEX ROWID CZ_PS_NODES (cr=1222 pr=0 pw=0 time=17570 us)
          3     INDEX RANGE SCAN CZ_PS_NODES_N12 (cr=1219 pr=0 pw=0 time=17510 us)(object id 750095)
          1      SORT AGGREGATE (cr=1211 pr=0 pw=0 time=17395 us)
        209       TABLE ACCESS FULL CZ_DEVL_PROJECTS (cr=1211 pr=0 pw=0 time=16937 us)
          3   TABLE ACCESS BY INDEX ROWID CZ_LOCALIZED_TEXTS (cr=14 pr=0 pw=0 time=165 us)
          3    INDEX UNIQUE SCAN CZ_LOCALIZED_TEXTS_PK (cr=11 pr=0 pw=0 time=132 us)(object id 3050530)
         19  TABLE ACCESS BY INDEX ROWID CZ_CONFIG_ITEMS (cr=778 pr=0 pw=0 time=41677 us)
       5816   NESTED LOOPS  (cr=202 pr=0 pw=0 time=16173 us)
         21    NESTED LOOPS  (cr=96 pr=0 pw=0 time=3617 us)
         23     TABLE ACCESS BY INDEX ROWID ASO_QUOTE_LINES_ALL (cr=47 pr=0 pw=0 time=2528 us)
       1058      INDEX RANGE SCAN ASO_QUOTE_LINES_ALL_N1 (cr=9 pr=0 pw=0 time=83 us)(object id 81688)
         21     TABLE ACCESS BY INDEX ROWID ASO_QUOTE_LINE_DETAILS (cr=49 pr=0 pw=0 time=1053 us)
         21      INDEX RANGE SCAN ASO_QUOTE_LINE_DETAILS_N1 (cr=28 pr=0 pw=0 time=598 us)(object id 81706)
       5794    INDEX RANGE SCAN CZ_CONFIG_ITEMS_PK (cr=106 pr=0 pw=0 time=8245 us)(object id 3049621)

  • How can we retrieve the Payload information from B2B

    Hello,
    We are trying to send the payload information back to the client for a failed BPEL Transaction from B2B's b2b_instancemessage view. We are enqueing messages to IP_OUT_QUEUE using BPEL. We see the payload coming correctly in the B2B Business Message Reports. But we don't see the payload coming in the b2b_instancemessage view for failed B2B transactions. How can we see the payload in b2b_instancemessage view for failed B2B transactions as well? or How can we retrieve the Payload information from B2B?
    Any help is greatly appreciated! Thanks. - Sam.
    Edited by: user12049162 on Dec 4, 2009 2:04 PM

    I am not sure about the PDK API to get the group name. But using LDAP API its easy to get the User Group.
    If you find the answer to get the group name using PDK API, Please update in forum. It will really help others.
    --Balaji S                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • The product I bought its not working as i expected, it doesn´t translate the exact information from pdf to excel, how can you help me or how can you return my money back....

    how can you help me

    What about adobé export PDF. ?
    Enviado desde mi iPhone
    El 07/05/2014, a las 23:00, Claudio González <[email protected]> escribió:
    The product I bought its not working as i expected, it doesn´t translate the exact information from pdf to excel, how can you help me or how can you return my money back....
    created by Claudio González in Adobe Reader - View the full discussion
    If you bought Reader, you were swindled, because it's a free program. And it has never been able of converting PDF files to any other format.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6363992#6363992
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Multiple reads of the same data from Multiprovider by Query (Bex)

    Hello, guys!
    We're having issue with performance of a query built on Multiprivider. During our investigation, we've found out that within one run of a Query, it several times refers to InfoProvider for the same data (see image attached).
    Do you have ideas what can be a reason for multiply reads of the same data from Multipvovider?

    Hello Nikita,
    By "copy of a query" i meant something like this as shown below :
    *Kindly click on the screenshot for a better view.
    1) See the highlighted portions below in the screenshot . See Query 2 highlighted and name of the BEx query highlighted.
    2) See the highlighted portions . See Query 3 highlighted and name of the BEx query highlighted.
    As you can see from the above screenshots i have used the same BEx query 2 times by the name of Query 2 & Query 3 . Infact i have not attached the complete screenhsot . In that i have used it 6 times.
    I have to analyze this a bit in detail but what i am guessing is that when this WEBi is called the single BEx is also called multiple times. And hence it hits the Info Provider multiple times resulting in a decreased performance.
    But this does not mean that this is wrong approach. There are various areas where you can improve for example :
    1) Either improve your BEx query if possible or use aggregates or something like that .
    2) Use the  Query stripping setting in WEBi so that unused dimensions and measures are not pulled resulting in an improved performance. It's switched on by default.
    Thanks!!
    Regards,
    Ashutosh Singh

  • Hello.  I just upgraded to Lion OS X 10.7.3.  I was previously running 10.5.7 which included the ENTOURAGE application.  how do I retrieve needed information from this application that no longer runs on this new system?

    Hello.  I just upgraded to Lion OS X 10.7.3.  I was previously running 10.5.7 which included the ENTOURAGE application.  how do I retrieve needed information from this application that no longer runs on this new system?

    The file you'll be looking for that has most of what you're looking for - messages, address book, etc. is the Entourage Database.  The verison of Microsoft Office I run (on Lion) is Office 2008.  By default the Entourage Database for this verison is at user/Documents/Microsoft User Data/Office 2008 Identities/Main Identity/Database.  That folder (Main Identitty) also has your rules, signatures, and such.  You'll have to recover this file from whatever backup you have.  If you have a different version of Entourage, the file location will be a little diffferent.
    Good luck
    srb

  • I'm selling my early 2011 MBP because I just bought a iMac. Could someone please tell me how to remove all my information from it but leave the OS working. Thanks so much.

    I'm selling my early 2011 MBP because I just bought a iMac. Could someone please tell me how to remove all my information from it but leave the OS working. Thanks so much.

    How do I securely delete data from the machine?
    Erase, formatting, OS X installs on Mac's

  • How do I get all information from my smart phone 4 to my new smart phone 5

    How can I move all information from my iPhone 4 to my iPhone 5?

    Using iTunes for this is recommended over iCloud since it will be faster and more thorough. Set the backup to be stored locally on the computer's drive.

  • How to get the log information when using a class?

    Hi All,
    I have a simple question, which I don't know how to solve. I am using org.apache.commons.logging.Log and LogFactory to do some logging. A typical situation is exemplified in the following code snippet.
    import org.apache.commons.logging.Log;
    import org.apache.commons.logging.LogFactory;
    class LogClass {
        private static final Log LOG = LogFactory.getLog(AClass.class);
        public void logit(){
            LOG.debug("This is the debugging log.");
    public class AClass{
        public static void main(String[] args) {
            LogClass l=new LogClass();
            l.logit();
    }But this way, I do not get the log information from the class LogClass. Could anybody please help?
    Many thanks.

    jschell wrote:
    jverd wrote:
    ...configuration in log4j.xml or log4j.properties.And far as I recall you need one of those two also. If there is no config then there is no output.I thought it used some default config if no file is present, but I could be mistaken. Either way, it adds to the possible problems that the OP could be having, any of which are consistent with his rather vague question.
    1) He's passing the wrong class to the LogFactory, and hence getting a logger with the wrong name, so he's seeing a different name than he expects in the output that's being produced.
    2) His config file does not contain the proper format to include the actual classname, independent of the logger's name, so he's missing a piece of desired information in each line of the output that's being produced.
    3) His config file indicates a threshold that's less verbose than the level at which his code is logging, so no output is present when he wants it.
    4) His config file is missing (or not where it's expected to be), so no output is being produced at all.
    5) His config file is missing (or not where it's expected to be), so a default level or format is being produced, effectively the equivalent of one of the misconfigurations described in #2 and #3.
    Since the OP seems to have vanished, we may never know.

  • How to display the updated data from db to user interface in sruts framewor

    A beginner in this area, I have been able to read a record from a
    MySQL database and populate in jsp form . Now, my goal is to
    allow the user to edit the contents of the form and then update the
    record in MySQL and then display the same in jsp. page
    The scenario in detail
    1)the data is fetched from db and displayed in non-editable format
    2)Next button is clicked
    3)Now in the same jsp page I view the same data from db in editable format
    4)The user is allowed to change the information
    5)Now update button is clicked
    6)the records are updated in the db -Finished doing till this step
    7)But the updated info in non - editable format to be displayed in jsp page is left pending.
    Here is my code for jsp,i want know how to write an action for this,tried doing the same in java and I'm successful.but what I need is how to fetch the updated information in the user interface.
    I've made both editable as well as non editable info in the same page with different actions.
    pl help me,I'm a newbie
    <%@ taglib uri="/WEB-INF/struts-bean" prefix="bean" %>
    <%@ taglib uri="/WEB-INF/struts-html" prefix="html" %>
    <%@ taglib uri="/WEB-INF/struts-logic" prefix="logic" %>
    <%@ page language="java" %>
    <%@ page import="java.util.ArrayList,java.util.Iterator" %>
    <%@ page import="com.finocus.common.container.CustomerDetailsTest;" %>
    <html:html>
    <head>
         <title>CUSTOMER DISPLAY</title>
    </head>
    <body>
         <table width="100%" bgcolor="darkkhaki">
         <tr>
              <td><table width="100%" bgcolor="indigo">
                   <tr>
                        <td><font color="white">Display</font></td>
                        <td><font color="white">Update</font></td>
                        <td><font color="white">Verify</font></td>
                        <td><font color="white">Confirm</font></td>
                   </tr>
                   </table>
              </td>
         </tr>
    <%
              //Container for holding data
              ArrayList list = (ArrayList)session.getAttribute("CUSTOMERDETAILS");
              Iterator itr=list.iterator();
              while(itr.hasNext())
              CustomerDetailsTest cust = (CustomerDetailsTest) itr.next();
              System.out.println("testGetCustomerDetails()-successed. retrieved CustomerDetailsTest="+cust.toString());
    %>
    <%
              //Session for checking whether edit or non-edit mode
              String pageMode = (String)session.getAttribute("CUSTOMER_PAGE_MODE");
              session.removeAttribute("CUSTOMER_PAGE_MODE");
              if(null==pageMode)
                   pageMode = "EDIT";
              if(pageMode.equals("EDIT"))
                   //display data in the form
                   System.out.println("Editable mode");
    %>
              <html:form action="/nonedit">
                   <tr>
              <td><table width="100%" bgcolor="darkkhaki">
              <tr>
                        <td><b><bean:message key="label.id"/></b></td>
                        <td><font color="red"><%=cust.getCusId()%></font></td>
         </tr><br>
         <td>
                             <font color="brown" face="Courier New"><b>
                        <bean:message key="label.Company"/></b>
                        </td><br>
                        <tr>
                   <td><bean:message key="label.cname"/></td>
                   <td><font color="blue"><html:text property="name" value="<%=cust.getCname()%>"/></font></td>
                        <td><bean:message key="label.cphone"/></td>
                        <td><font color="blue"><html:text property="phone" value="<%=cust.getCphone()%>"/></font></td>
              </tr><br>
         <tr>
                   <td><bean:message key="label.caddr1"/></td>
                   <td><font color="blue"><html:text property="address1" value="<%=cust.getCaddress1()%>"/></font></td>
                        <td><bean:message key="label.cemail"/></td>
                        <td><font color="blue"><html:text property="email" value="<%=cust.getCemail()%>"/></font></td>
              </tr><br>
         <tr>
                   <td><bean:message key="label.caddr2"/></td>
                   <td><font color="blue"><html:text property="address2" value="<%=cust.getCaddress2()%>"/></font></td>
                        <td><bean:message key="label.cfax"/></td>
                        <td><font color="blue"><html:text property="fax" value="<%=cust.getCfax()%>"/></font></td>
              </tr><br>
         <tr>
                   <td><bean:message key="label.ccity"/></td>
                   <td><font color="blue"><html:text property="city" value="<%=cust.getCcity()%>"/></font></td>
                        <td><bean:message key="label.czip"/></td>
                        <td><font color="blue"><html:text property="zip" value="<%=cust.getZip()%>"/></font></td>
              </tr><br>
         <tr>
                   <td><b><bean:message key="label.cstate"/></b></td>
                   <td><font color="red"><html:text property="state" value="<%=cust.getCstate()%>"/></font></td>
         </tr><br>
         <td>
                             <font color="brown" face="Courier New"><b>
                        <bean:message key="label.Admin"/></b>
                        </td><br>
         <tr>
                   <td><b><bean:message key="label.AAname"/></b></td>
                   <td><font color="red"><html:text property="adminname" value="<%=cust.getAname()%>"/></font></td>
         </tr><br>
         <tr>
                   <td><b><bean:message key="label.AAemail"/></b></td>
                   <td><font color="red"><html:text property="adminemail" value="<%=cust.getAemail()%>"/></font></td>
         </tr><br>
         <tr>
                   <td><b><bean:message key="label.AAphone"/></b></td>
                   <td><font color="red"><html:text property="adminphone" value="<%=cust.getAphone()%>"/></font></td>
         </tr><br>
         <td>
                             <font color="brown" face="Courier New"><b>
                        <bean:message key="label.User"/></b>
                        </td><br>
         <tr>
                   <td><b><bean:message key="label.AUname"/></b></td>
                   <td><font color="red"><html:text property="adminusername" value="<%=cust.getUname()%>"/></font></td>
         </tr><br>
         <tr>
                   <td><b><bean:message key="label.AUemail"/></b></td>
                   <td><font color="red"><html:text property="adminuseremail" value="<%=cust.getUemail()%>"/></font></td>
         </tr><br>
              <tr align="center">
                        <td><html:cancel value="Cancel"/>
                        <html:submit value="Next"/></td>
              </tr>
              </html:form>
    <%               
              }else
                   //display data in the text
                   System.out.println("Non-Editable mode");
    %>
              <html:form action="/edit">
              <tr>
              <td><table width="100%" bgcolor="darkkhaki">
                   <tr>
                        <td><b><bean:message key="label.id"/></b></td>
                        <td><font color="red"><%=cust.getCusId()%></font></td>
                        <td><b><bean:message key="label.status"/></b></td>
                        <td><font color="red"><%=cust.getStatus() %></font></td>
         </tr><br>
         <td>
                             <font color="brown" face="Courier New"><b>
                        <bean:message key="label.Company"/></b>
                        </td><br>
                        <tr>
                   <td><bean:message key="label.cname"/></td>
                   <td><font color="blue"><%=cust.getCname()%></font></td>
                        <td><bean:message key="label.cphone"/></td>
                        <td><font color="blue"><%=cust.getCphone()%></font></td>
              </tr><br>
         <tr>
                   <td><bean:message key="label.caddr1"/></td>
                   <td><font color="blue"><%=cust.getCaddress1()%></font></td>
                        <td><bean:message key="label.cemail"/></td>
                        <td><font color="blue"><%=cust.getCemail()%></font></td>
              </tr><br>
         <tr>
                   <td><bean:message key="label.caddr2"/></td>
                   <td><font color="blue"><%=cust.getCaddress2()%></font></td>
                        <td><bean:message key="label.cfax"/></td>
                        <td><font color="blue"><%=cust.getCfax()%></font></td>
              </tr><br>
         <tr>
                   <td><bean:message key="label.ccity"/></td>
                   <td><font color="blue"><%=cust.getCcity()%></font></td>
                        <td><bean:message key="label.czip"/></td>
                        <td><font color="blue"><%=cust.getZip()%></font></td>
              </tr><br>
         <tr>
                   <td><b><bean:message key="label.cstate"/></b></td>
                   <td><font color="red"><%=cust.getCstate()%></font></td>
         </tr><br>
         <td>
                             <font color="brown" face="Courier New"><b>
                        <bean:message key="label.Admin"/></b>
                        </td><br>
         <tr>
                   <td><b><bean:message key="label.AAname"/></b></td>
                   <td><font color="red"><%=cust.getAname()%></font></td>
         </tr><br>
         <tr>
                   <td><b><bean:message key="label.AAemail"/></b></td>
                   <td><font color="red"><%=cust.getAemail()%></font></td>
         </tr><br>
         <tr>
                   <td><b><bean:message key="label.AAphone"/></b></td>
                   <td><font color="red"><%=cust.getAphone()%></font></td>
         </tr><br>
         <td>
                             <font color="brown" face="Courier New"><b>
                        <bean:message key="label.User"/></b>
                        </td><br>
         <tr>
                   <td><b><bean:message key="label.AUname"/></b></td>
                   <td><font color="red"><%=cust.getUname()%></font></td>
         </tr><br>
         <tr>
                   <td><b><bean:message key="label.AUemail"/></b></td>
                   <td><font color="red"><%=cust.getUemail()%></font></td>
         </tr><br>
         <tr align="center">
                        <td><html:submit value="Update"/></td>
              </tr>
              </html:form>
    <%
    %>
    <%
    %>
                   </table>
              </td>
              </tr>
         </table>
    </body>
    </html:html>

    u r using action classes. so after calling the insert method in Action Class to a dao... the next statement should be retrieve statement. so at the time of updating first it will get updated.. the next statement it will execute is retrieve and then set these details in VO or FORM and show it on JSP
    Message was edited by:
    leo_michael

  • HT1918 Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e

    Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

  • How can I copy GPS information from one image to another?

    I bought a Canon S100 specifically for its GPs and movie capability.  On a recent vacation, I used the S100 and a Nikon D300.  In cases where images were taken with both cameras in approximately the same place, I would like to copy the GPS information from the S100 CR2 files to the D300 NEF files.  Does anyone know how to do this or if there is any plugins that will do it?

    The added benefit of using GeoSetter to copy the information from one photo to another, is that you can see where every already-tagged photo is on a Google map to make sure the location is actually correct.  Sometimes the camera clock is off a few seconds or minutes and you can easily figure how what offset to use by watching where the existing photos show on the map.
    Using the MS Pro Photo Tools to generate a track from the existing S100 photos and then using that track in GeoSetter to assign the rest, with interpolation enabled, seems like the best course of action if the S100 track information is no longer available.
    When using an external program to Geotag images that are already in LR, to be safe you should first save all the metadata to XMP files in the folder you’re going to tag, then exit LR, then geotag the photos, then restart LR and read information from all the XMP files.
    Another benefit of GeoSetter is that you can assign the locality information to the photos that already have just coordinates in them.

  • HT4910 how do i restore my information from my i cloud

    how do i restore my information from my i cloud

    Unfortunately, New Zealand doesn't have an Apple store. The closest we have is something called Yoobee, who i'm going to have to visit on the weekend. As while I got my iPad back fixed today, I have been unable to load all of my apps from the Cloud. Weirdly some of the Apps loaded, and I even synced one with my Mac, only to find later that they had disappeared. Now some are showing open but not working. This has been the most frustrating experience. I have always loved my iPads (this is my 3rd one) but I am seriously regretting paying for this one.

Maybe you are looking for

  • In iPhoto '11, how do I manually move a locations pin?

    I'm trying to add locations to some older photos that I've recently scanned and added to my iPhoto '11 library. While I can successfully add a general location to each photo, what I cannot do is "select, drag, and drop your pin into the proper locati

  • Can't restore ipod touch 2g (MC)?

    Important info beforehand: I have a iPod Touch 2g MC model, on iOS 4.2.1. I use the latest iTunes update, and my laptop OS is Windows 7... Hello all! Here's the backstory, I am new to the support community and have started using it just to find a sol

  • ABAP Query error

    Hello! can anyone help pls? I am in the process of constructing an ABAP query and I'm getting an error message which is quite puzzling.  Here's the details: I'm creating the query using an infoset constructed from logical database VAV.  When I try to

  • Report Heading

    Hi I placed my report calculation in report footer section. Report is working fine, but if there are more records then in second page it is showing  report page header section and footer sections. but if there are no records then i don't want to show

  • Some boards of 15454 MSTP support 82channels, how?

    Hi all Because the DMX-40-C and DMX-40-CE only has 40 channels, at most we can see they only support 80 channels, how can the systems support up to 82 or 41 channels?