How taglets should emit warnings/errors?

I've scoured the forums and google, and it's still not clear to me how a custom taglet written for the standard doclet should signal warnings. I see the methods error() and warning() on com.sun.tools.doclets.internal.toolkit.util.MessageRetriever, accessible via:
com.sun.tools.doclets.standard.Standard.htmlDoclet.configuration().messageThose methods, it seems, are expecting a resource bundle key followed by some number of placeholder fill-ins.
1) How can I write a simple text message as a warning or error without a resource bundle lookup?
2) If I have no choice but to have it do a resource bundle lookup, how can I add a message template to the bundle used by default, or direct to a different configuration?
thanks.

Hi Stuart
Thanks for your advice. Unfortunately this note is already in the system, and the note (1400742) too.
As I see in the debugger on ABAP side, the messages should be sent to the portal, but unfortunately I cannot
debug towards in the Java coding.
Could it be that the regular messages from the backend are somehow disabled?
Many Thanks in Advance
Zsolt

Similar Messages

How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed.

How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed but it still kept getting stuck on the apple loading screen.

You have limited opportunity to attempt to create a backup of your created files.
That is what the SafeBoot or safemode appears to allow you -- at the moment.
Since the hard disk drive exhibits signs of failure or other major issues, plan
on a replacement in the near future. You may be able to get the computer to
start up in a regular full OS X (not safe mode) but consider its hours are limited.
An externally enclosed hard disk drive (with own power supply, not relying on
Mac ports to run it) is a good basic means of which to use a disk utility to make
a copy or a Clone of the current OS X. This may help retrieve an archive that
could be used along with a Time Machine backup, to restore your Mac once you
get a new hard drive installed inside.
Good luck & happy computing!

HT202321 I am getting an error 36 when I try to restore my iphoto library. Can someone please advise on how I should resolve this?

I am getting an error 36 when I try to restore my iphoto library from my time machine. Can someone please advise on how I should resolve this? I have tried repairing permissions in the iPhoto library and that didn't help. I've also tried using different versions of the iPhoto library from the time machine. That resulted in the error as well.

You can ask Time Machine queries on the firm for whatever version of the OS you have:
Mac OS & System Software

I need to know that how we should analyse the bdoc error

Hi Experts,
I am monitoring the BODCs in the crm system, through the transaction smw01 ( both in & out).
there are a alots of erros in the queue.most of the erros are related to BUPA_MAIN & the queue are from r/3 (R3AD_CUSTOME)
I need to know that how we should analyse the bdoc error. should i need to reprocess those error.
PLease add experts point on this.
Thanks & Regards
Prajith P
Moderation: Locked. Rule number one: Try to find the answer first. [See rules of engagement.|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Joaquin Fornas on Oct 25, 2011 8:45 AM

Install 7. Don't bother with applying drivers and such, just reboot again from DVD and install again, it will see the existing system and this time activation will be possible.
Vista is mess, takes longer etc. Hope you have SP1 version of 7. And for Vista, only SP2+ are even supported now, by MS.

Warnings & Errors in Setting up NIS master server

Hi All,
I am setting up NIS for that first time & I am getting the following Warnings & errors when I use # /usr/sbin/ypinit -m
1) make:Warning:Don't know how to make target '/etcdir/services' current working directory /var/yp.
Where /etcdir is the substitute for /etc which I am using for DIR=/etcdir & PWDIR=/etcdir
2) make:Warning:Target 'all' not remade because of errors current working directory /var/yp.
3)***Error Code1***
make :Fatal Error : Command failed for target 'k' error running Makefile.
Thanks in Advance,
Shwetha

Hmm, does "/etcdir/services" exist? Apparently not.
You should populate the directory with the ascii yp map sources, so that there's something from which yp
maps can be built.

How to switch off the error sound in Triversity

Hi
How to switch off the error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

Mohammed,
There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
You should be golden right after the reboot.
Hope this helped,
Alfredo Carigga

HT201376 I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?

I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?

About all you can do is wait until it finishes or you get an error message.

How to avoid time out error in abap program

How to avoid time out error in abap program
based on performance wise i want please help

Timeout occurs when a statement exceeds its time limit.To avoid this we need to tune the statements.
I can give give you few tips for tune a select stament.
1.The order of the feilds in the select statement should be same as the order of fields in the database table.
2.It is always advisible to use the key fields when you are using the where clause.
3. Sort the internal table while using the for all entreis statements.
4.Use index in where clause if necessary.
5.When you have a read statement user binary search but before this a sort statement should be there.
6. Check your program with the Tcode ST05 and check which statement takes much time based on that tune that.

Warnings/Errors using getClass().newInstance()

I'm getting some warnings & errors using getClass().newInstance() on an object. I can't however see what's wrong.
First a little background, Bar is a class that manages a set of beans, including creation. One of the actions is to create a special copy of bean, the method that does this does some bookkeeping (such that a particular instance of Bar will only work with objects it created).
This class was originally written in 1.4 and I'm now trying to genericify it.
First attempt:
public class Bar<T extends Foo> {
    public T getFlaggedBean(T fromBean) throws InstantiationException, IllegalAccessException {
        T newBean = fromBean.getClass().newInstance();
        // do some stuff
        return newBean;
}This yielded: "Type mismatch: cannot convert from capture#1-of ? extends Foo to T"
I can cast:
        T newBean = (T) fromBean.getClass().newInstance();Which drops me to a warning a can suppress: "Type safety: Unchecked cast from capture#1-of ? extends Foo to T".
The code runs fine like that, but I'd rather not even have a warning to suppress, I don't like suppress them unless I know that it really is safe.
The code above looks perfectly reasonable to me, I can't figure out why it could be problematic, which leads me to wonder if I'm missing something. We've got a parameter that is of type T or a subclass of it, calling getClass().newInstance() creates an new object such that origobj.getClass() == newobj.getClass() *. Since that class is T or a subclass of it, it should be assignable to T.
The code above when, compiled and subjected to type erasure, effectively produces a method that looks like this:
    public Foo getFlaggedBean(Foo fromBean) throws InstantiationException, IllegalAccessException {
        Foo newBean = (Foo) fromBean.getClass().newInstance();
        // do some stuff
        return newBean;
    }Note that the cast to Foo is strictly unnecessary.
There's a couple ways I could solve this, such as:
    public <S extends T> T getFlaggedBean(Class<S> useClass, S fromBean) throws InstantiationException, IllegalAccessException {
        T newBean = useClass.newInstance();
        // do some stuff
        return newBean;
    }I'd rather not change the API, though. Can anybody give me an idea where the initial code, with warnings could be unsafe?
Neil
* Unless you're mucking about with class loaders, but that problem would be an issue with non-generic code too.

Paul,
So does that bit of the JLS mean that my compiler is doing something wrong when it finds the getClass() call, in the code below, to return Class<? extends Foo> rather than Class<? extends T>? If the latter were returned it would compile fine.
public class Bar<T extends Foo> {
    public T getFlaggedBean(T fromBean) throws InstantiationException, IllegalAccessException {
        T newBean = fromBean.getClass().newInstance(); // doesn't compile
        // do some stuff
        return newBean;
}I was initially distracted by the "capture#1-of" and thought that was culprit, but as the code below demonstrates calling getInstance() on an instance of a class the compiler notes as "Class<capture#1-of ? extends Foo>" assigns to Foo just fine. Interestingly in this code my IDE says that getClass() is returning "Class<? extends Foo>", both javac and the IDE spat out "Class<capture#1-of ? extends Foo>" when the 1st line of the method had a warning or error. I assume that "Class<? extends Foo>" and "Class<capture#n-of ? extends Foo>" are equivalent and that "capture#n-of" is something fairly internal to the compiler. Can anyone shed light on that?
public class Bar<T extends Foo> {
    public Foo getFlaggedBean(T fromBean) throws InstantiationException, IllegalAccessException {
        Foo newBean = fromBean.getClass().newInstance(); // this works
        // do some stuff
        return newBean;
}

HT201401 how can i fix an error 1601 restore

how can i fix 1601 error on iphone 4

This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

OSX sometimes places 31 character limit on file names. How can I get this error to stop?

This error notice doesn't make sense, since many of my file names exceed 31 char. This error message pops up when saving documents, esp. web pages. As a consequence, OSX will refuse to let me save the file, until I shorten the name and so remove informative identifying features of the file name. But most of the time, OSX is perfectly happy to save files with names longer than 31 char. How can I get this error notice and block to turn off?

I have also seen this issue it occurs regularly when transferring word documents files from my Macbook Pro running OSX 10.5.8 to my iMac running 10.9.4.
My iMac HD should be formatted to factory standards as well since I have not mucked around with it since I bought it.

Error in Migration Db sql server to sql Azure, how i can fix this errors

I get an error TOTAL_WRITE is not supported in current version when i try validate my database from sql server migration in to sql azure. How I can Fix this error migrate to sql azure
Also I git this error sp_spaceused is not supported in current version of Azure SQL Database – Reynel Useche Velasco 22 mins ago
StoredProcedure [dbo].[p_sizetables] -- 'db_name(' is supported only for the local database. You should test to verify the results are what you want. – Reynel Useche Velasco just now edit
Reynel Alfredo Useche Velasco

Hi Reynel,
I see that you have posted this query on stack overflow.
I would like to involve our SQL experts in this topic and get the best solution.
As of now to my knowledge @@TOTAL_WRITE is not supported on SQL Azure.
In the meantime, you can refer the below links for migrating your database from on-prem to Azure.
https://msdn.microsoft.com/en-us/library/hh313125(v=sql.110).aspx
https://msdn.microsoft.com/en-us/library/hh313129(v=sql.110).aspx
Hope this helps you.
Girish Prajwal

Need a query,which will do a comparison and if it doesnt satisfy the condition it should raise an error by using raiserror statement

I have a Table called Test_ X in which there are two fields:
1) date_value
2)Application_Name
requirement: we have to calculate the number of days ramaining through date_value field and compare it to with n days.
if it is less than n days it should raise an error through raiserror statement.
I get the below logic to get the no of days before expiry:
select GETDATE() 'Today Date',
date_value 'expiry date',
abs(DATEDIFF(dd,date_value,getdate()))'No of days before expiry'
from dbo.Test_X
where Application_Name='xyz'
With above satatement am able to get the Number of days before expiry .
my question is how to comare it with a variable say n days and if is less than n days it should raise an by using raiserror statement .
Please help or advice.

You can use variables in the RAISERROR, but not expressions, e.g.
DECLARE @Days INT;
SET @Days = ABS(datediff(day, '19000101', CURRENT_TIMESTAMP));
RAISERROR (
N'This is message %s %d.'
,-- Message text.
10
,-- Severity,
1
,-- State,
N'number'
,-- First argument.
@Days
);-- Second argument
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Metadata Consistency warnings error.....need help

I'm getting this error when i run my reports. I checked in all my files and I'm not seeing any consistency warnings. Can someone tell me why and how i can fix this error?
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: count(HPQC_DEFECT.BG_BUG_ID by [ HPQC_DEFECT.BG_BUG_ID, HPQC_DEFECT.BG_SEVERITY, HPQC_DEFECT.BG_PRIORITY, HPQC_DEFECT.BG_DETECTION_DATE, HPQC_DEFECT.BG_DETECTION_VERSION, HPQC_DEFECT.BG_USER_03, HPQC_DEFECT.BG_USER_05, HPQC_DEFECT.BG_USER_15, HPQC_DEFECT.Closing Date, Project_Dim.DOMAIN, HPQC_DEFECT.Week of Defect Closed Date, hpqc_audit_log_prop_EIT.AU_TIME, hpqc_audit_log_prop_EIT.AP_NEW_VALUE, case when Project_Dim.PROJECT = 'PRODUCT_13_2' then 'Stores' when Project_Dim.PROJECT = 'System_Test_13_2' then 'MOM' when Project_Dim.PROJECT = 'Enterprise_13_2' then 'EIT' else Project_Dim.PROJECT end ] ). Please fix the metadata consistency warnings. (HY000)
SQL Issued: SELECT "Projec Dim".Domain saw_0, case WHEN "Projec Dim".Project = 'PRODUCT_13_2' then 'Stores' WHEN "Projec Dim".Project = 'System_Test_13_2' then 'MOM' WHEN "Projec Dim".Project = 'Enterprise_13_2' then 'EIT' else "Projec Dim".Project end saw_1, COUNT("Defect Facts"."Defect ID") saw_2, "Defect Facts"."Defect ID" saw_3, "Defect Facts".Severity saw_4, "Defect Facts".Priority saw_5, "Defect Facts"."Reported Release (Base)" saw_6, "Defect Facts"."Closing Date" saw_7, "Defect Facts".Status saw_8, "Defect Facts".Type saw_9, RSUM(COUNT("Defect Facts"."Defect ID")) saw_10, "Defect Facts"."Week of Defect Closed Date" saw_11, "Defect Facts"."Testing Type" saw_12, "Defect Facts"."Detected on Date" saw_13, hpqc_audit_log_prop_EIT.AP_NEW_VALUE saw_14, hpqc_audit_log_prop_EIT.AU_TIME saw_15 FROM Defect WHERE ("Defect Facts"."Closing Date" IS NOT NULL) AND ("Projec Dim".Project IN ('System_Test_13_2', 'PRODUCT_13_2', 'Enterprise_13_2')) AND ("Defect Facts"."Reported Release (Base)" IN ('13.2', '13.2 Euphrates')) AND ("Defect Facts"."Testing Type" IN ('System', 'System Test', 'Integration', 'Regression', 'EIT')) AND ("Defect Facts"."Detected on Date" > timestamp '2010-04-01 00:00:00') AND (Audit_Log_Dim.AU_ENTITY_TYPE = 'BUG') AND (hpqc_audit_log_prop_EIT.AP_NEW_VALUE IN ('Cancelled', 'Closed', 'Completed', 'Resolved')) AND (hpqc_audit_log_prop_EIT.AU_TIME = date '2010-04-01') ORDER BY saw_11, saw_4

I was facing this problem for a long time, this came up
1) when there was no link between the columns shown in the report and the dimension against which it is shown. Sol: You need a physical join at the physical layer and also properly define logical joins at the BMM layer.
2) when you use facts for dimensions as well. Sol: you need to make sure all aliases are mapped(in the dimension) as well when you show the data.
3)when content level has not been set correctly.Content level is very important, you need to make sure that the content levels are set properly, make sure that content levels for all the dimensions used in the request that is throwing an error, are set in the Logical Table Source of the fact and are at the correct levels. If you are not sure of any content level then do not set any content level.
4)when I had a duplicate column under different presentation tables. Remove the duplicate.
Thanks
Manoj
Edited by: user13367543 on Jul 27, 2010 12:30 AM

How to calculate percentage of errors in DP

Hi Gurus,
Can anyone tell me How to calculate the percentage of errors?
I had generated forecast and wanted to know how much is the error we have .
Please let me know your answers
Thanks a Lot
regards,
Raj

Hi Gurus,
I just wanted to know how to get lowest percentage errors for my forecast and make business happy ?
I am using "Auto Model selection-2" and i wanted to have lowest percentage errors and what should i do for it?
What alpha , Beta and Gamma values need to keep in forecast profile?
Please let me know it will be really great
Thanks for the answers
Regards,
raj

How taglets should emit warnings/errors?

Similar Messages

Maybe you are looking for