How the Performance data depends on Number of CPU/ RAM size/ Hard Disk size

Hi,
I have started Performance testing (web test and Load tests) using VSTS 2012. I was analysing the VSTS results summary page.
I could not find a way by which we can find a co-relation between the Performance Result data Impacted by Server's Configuration such as
1- # of CPUs /Cores
2- RAM size
3- Hard Disk capacity
Could you help me out if we can reach to a point, through which we can say that, For eg - the Server Performance can be improved if we increase any of the dependent hardware configuration and Also, How the Hardware configuration impacts the Performance.
Thanks.
Thanks, Anoop Singh

The results show the performance with the hardware and software configuration
when the test is run. The results may show that some parts of the configuration are lightly loaded (and hence have plenty of spare capacity) whereas other parts are heavily loaded (and hence may be limiting the system performance).
To see the effect of changing the hardware or software configuration would need running exactly the same test with that changed configuration. Then the results of the two (or more) different runs can be compared. Microsoft has some details on how
to compare load test results. See
https://msdn.microsoft.com/en-us/library/dd728091(v=vs.120).aspx
Regards
Adrian

Similar Messages

  • How the CRM data is transferred (initial load) to TREX server in CRM EHP1

    Hi Guru's
    I am working on HV segmentation first time and would like to know, how the CRM data is transferred (initial load) to TREX server in CRM EHP1, if we create the 'Data source for HV - Attribute set / Inforset' will that transfer the data to TREX server or do we need to perform Initial load by execute by batch program / Transaction.
    For the update (delta load) is the program : CRM_MKTTG_TREX_UPDATE to update the BP data, can we also add other objects (Transactional data) for delta load.   
    Regards,
    Ajay Kumar

    Hi Ajay,
    Yes you are right the Report CRM_MKTTG_TREX_UPDATE is used for Full load (inital load) for HV segmentation data.
    Both Full and Delta load is suggested to be performed in background. You can use the options "Business partners" and "Marketing permissions". For BP's you can use Delta upload with further options:
    Synchonize Business Partners Beforehand
    Force Update
    Offset for Delta Table Entries (in sec.)
    You can also "Define Delta Source Objects for High Volume Segmentation" in SPRO > MKT > HV segmentation.
    Here you can set relevant data source objects that is available for delta upload.
    For more details refer to documentation next to the customization entry.
    Hope this information helps you.
    Regards,
    Anup

  • Need to understand how the PGI date is being calculated

    Hi,
    Need to understand how the PGI date is being calculated.
    Does the PGI date get recalculated if the cusotme delivery date is changed.
    Thanks,
    Raki

    Hi,
    Thanks for the information and please let us know is there any calculation logic exist for that?
    I have changed delivery date in the sales order and based on that-
    - Transportation planning/material availability/loading/schedule line and confirmed quantity date was chaged.
    Is this the - GI date - Transist time= PGI?
    Thanks,

  • How the master data of multi language is shared in the info cubes

    hi frindz,
    how the master data of multi language is shared in the info cubes
                                                                     bye bye
                                                                      venkata ramana reddy.G

    Hi Ventak,
    In the infocube you have the key. Then you have a text master data table that has as key (for the table) the key of the value (the one in the cube) and the language, and the text in that language as another field (short, med, long).
    Hope this helps.
    Regards,
    Diego

  • How the master data delta  works

    hi, experts
    i want to know how the master data delta (ale pointer) works? what the principle is? for example, the 0asset_attr datasource has 20 fields, any of the 20 fields changes can triger the delta? if i enhance 3 fields to the asset master data, does the 3 fields change can trigger delta?

    Application Link Enabling (ALE) change pointers are configured and used to be able to trigger processing of an outbound process, such as data extraction, and determine only those Master Data records that have changed. This is all done without the need for a program being required to determine deltas.
    SAP delivered program, RBDMIDOC runs periodically and deterlines if change pointers have been updated for specific message types. New or modified Master Data records are automatically initiated via ALE. RBDMIDOC references the correct IDoc program for any given type via TBDME (the TBDME table also cross-references message types with the ALE change pointer table) so that the data goes where it should and is processed accordingly. Tcode BD60 is the interface in SAP for maintaining the TBDME table.
    When a change is made to the standard content Master Data record, the delta will be identified. Any columns that have been enhanced to the Master Data will not be identified as a delta because enhancements are a post-extraction process and only get updated after the standard content structure has been populated.

  • Data rescue 3 external drive recovery .Invisible external hard disk 1 tb., I want a refund.

    data rescue 3 external drive recovery .Invisible external hard disk 1 tb., I want a refund.

    I personally would use Disk Warrior before attempting to recover any data for that exact reason.

  • Can anyone explain how the LO data source flows from ECC to BI up to cubes?

    Dear all,
    Can anyone explain step by step (HOW THE DATA FLOWS)....By taking 2LIS_11_VAHDR  from SD , starting from Activate Data source in ECC  to Info Cube in BI7.0. Please this will be helpful -
    Thanks for the advance answers...
    Edited by: harishk.225 on Dec 23, 2011 9:56 AM

    Hi Harish,
    First go to RSA5 in ECC  select your datasource 2LIS_11_VAHDR and activate it.
    After activatin check in RSA6 whether the datasoure activated properly or not.
    Then log on  to BI sytem Select datasource and click on replicate.
    Then Create Infocube infopackage ,Transformation, DTP ...entire flow. But dont schedule it because there is no data in SETUP Tables.For full load first we need to run statistical set up , so that data should come to SETUP Table.
    Now go to ECC  enter T.CODE OLI7BW to filled up the SETUP Table  for datasource 2LIS_11_VAHDR.
    It will ask  you for Run Name etc give the run name and time limit and execute it.
    If you get some error then first delete the SETUP Table by using Transaction Code LBWG.
    In LBWG it will ask you for applicatiion number , give 11 i.e for sales datasourc and execute it.
    Data will get deleted from SETUP Table. To check data is deleted or not  in SET UP Tabe go to database table MC11VA0HDRSETUP. Always remember the name of SETUP Table will be Extract Structure followed by SETUP.
    EX : If extract structure name is MC11VA0HDR then name of the SETUP Table will MC11VA0HDRSETUP.
    If data gets deleted then again go to 0LI7BW and run the Statistical Setup then agan check in MC1VAOHDRSETUP table contains data or not.
    Then trigger the Infopackage and DTP in BI.  Above steps was for full load.
    Now to Load deltas follow below steps.
    First Create INIT at BI side which enable delta at ECC Side.
    Then go to ECC and execute T.CODE LBWE.
    LBWE is LO Cockpit Work Bench. There we have folowng functions 1.Maintan Datasource. 2.Maintain Extract Structure. 3. Job  Control.  4.Delta Type 5.. Activate/deactivate.
    If you want to add any new field to your datasource then to to Maintain Extract Strucutere remeber before adding or modififying datasource first we should deactivate datasource by using 5th function  Activate/Deactivate.
    Then select DELTA TYPE in delta type we have four types of delta. 1. Delta Queue (RSA7) 2. Queued Delta (LBWQ)
    3. Unserialized (SM13) , 4. Seriaized (SM13)
    If you select Delta queue then deltas drectly come to RSAT.
    if you select Queued Delta  deltas goes to LBWQ then you have perform V3 job by using Job Control  function to move data from LBWQ to RSA7. Remeber to BI  data  always goes from RSA7 only.
    If you select Unserealized then delta goes to SM13 again you have to perorm V3 Job to move deltas in RSA7.
    Serialize update is not in used in Lo-cockpit.
    There is a differerence between  DELTA QUEUE , QUEUED DELTA, UNSERIALIZE UPDATE. Pls find the differences on net.
    Then select your delta type and create deltas dtp in BI and start loading .
    Hope this help you.
    In RSA7 we have two tables delta and repeat delta, to know the functionality of this please search for the documents on  net.
    Regards,
    Asim

  • Pricing Conditions and how the pricing date is determined

    Hi all,
    Small question, i ahve some pricing conditions that use the Serives Rendered date and others that use the Pricing Date from an order, how is the condition decided on what date it uses?
    Hope i have expplained this ok, if not and you need more info let me know.
    Regards
    Steve

    Hi
    There is a difference between Service Rendered Data and Pricing Date.
    Normally Freight Conditions are maintained on Service Rendered Date so the freight will be picked on the basis of date on which the Actual Delivery done, whereas Pricing date is used for other conditions so that price will be based on the date on which the document created and the Pricing Date maintained in that.
    In the same way there is a Billing Date which came in Invoice so price will be based on the date of Invoicing.
    If you maintain the record in VK11 and test a cycle you will be able to find the difference easily.
    Regards
    Amitesh

  • Change the validity date in change number

    hi team,
    I want to change the validity date of a change number from 01.01.09 to 01.03.09. I am getting an error "A BOM has already been changed using a change number with the same valid-from date as the selected date 03.01.2009".  I can change the date to before 01.01.09 but cannot after 01.01.09.
    Can you please help me.
    thank you,
    Satish

    Dear Mamiditi Satish Kumar,
    Is it a change number with release key or without release key?
    Do you want to assign a different validity date for the changes made using that change number?
    Try using alternative date field in CC02.and you have to select the object to assign the alternative date.
    Say if you want to assign an alternative date for a processed BOM,you have to select that object and
    enter the alternative date.
    Regards
    Mangalraj.S

  • How to display data depend upon ListBox value?

    Hi Experts and Particularly Hema,
    As I asked before how to display data in the ListBox, I got an very good response from you all(particularly Hema) .
    Now what my doubt is asked with sample scenario below:
    In Screen Painter -
    Two fields namely : One List Box and other is I/O used only for displaying purpose i.e., only for output, not for input purpose.
    List Box is filled by primary key field(C1) value from one table(T1) when the screen load.(i.e., such code is written in PBO).
    Now what I need is :
    If the user select any one value in the List Box then it automatically display the corresponding C2 value from T1 in the I/O field.
    I think you may all understand what I am trying to ask.Please let me know the solution.
    Thanks in advance,
    Regards,
    Raghu

    Simply attached a function code for the listbox... when the user changes the value, you will be able to pick this up in the PAI and loop back to the PBO and redisplay the corresponding output field.
    Jonathan

  • How to add date with specified number of years?

    Given a date 2005-3-28.
    How do i get the date of the given above date plus 25 years?
    Please advise.
    Thank you.

    Calendar cal = Calendar.getInstance();  // Current date
    // Do something to set the given date.
    cal.add(Calendar.YEAR, 25);

  • How the translation date(BKPF-WWERT) in FI document is decided?

    Hello, experts,
      When FI documents are created, translation date is automatically set.
      Can someone tell me the rule what date is set to the translation date?
      Basically, it looks it is coming from posting date. However, there are the case other kind of date is set.
      So, I wonder what date is set.
    Satoshi Matsumoto
    Edited by: Satoshi Matsumoto on Jun 23, 2010 8:30 AM

    Hi,
    Normally this is posting date only.
    Go and check transaction OB22, there you can find the options currency type wise.
    Rgds
    Murali. N

  • Get the performance data on to DCNM Web client summary page

    Dear all,
    Objective: To show my Nexus swicthes performance on DCNM summary web page.
    I had install full evaluation package of DCNM 6.2 Server SAN, LAN. This installtion is for my PoC on 2x Nexus swiches.
    I was able to login to the web browser and on the summary page, i dont see any performance on CPU, SAN Host Port, SAN Storage Port.
    I did read up and created Flows on my Nexus swicthes. But still no performance shows in DCNM page.
    At the DCNM web, Admin/Status, i tried to click Start button on Performance Collector but failed.
    Hope someone help me to get the performance status shown on my DCNM page.
    Note: I am very confuse on the Performance subject.

    We have faced a similar issue , Oracle have recommended to install the following process to fix this issue ..
    Steps involved :
    Necessary roles for FDM Web on Windows 2008
    The first step is to launch the Windows 2008 Server Manager as Shown. Click the "Add Roles" link.
    The first role necessary for the FDM Web Server to function is the Application Server Role
    Selecting this role returns a message box alerting you that additional features are required for installation of the role. Click the Add Required Features Button.
    The second required role is the Web Server (IIS) Role which installs the IIS components.
    The next screen is an Introduction to the Application Server Role. Click Next to continue.
    The Application Server Foundation is selected by default. The Web Server (IIS) Support Role Service is also required.
    Choose to add the Required Role Services
    The next screen is an Introduction to the Web Server (IIS) Role. Click Next.
    All default selected options should be checked along with the "IIS 6 Management Compatibility" option which will install the IIS 6 Metabase Compatibility required for FDM.
    Review all selected options and click "Install" to install the components.
    Installation is Successful. Click Close to finish.

  • APO/BW: How to get back from APO to BW/ How the send data from BW to APO

    Hi,
    1. I read that BW is the “data layer” for APO DP and therefore, I expected data to flow from BW, the data layer, to APO DP but not the reverse. Yet, I also read that “data can be transferred from ‘Livecache’ back to BW by using the ‘extractor technology’ from BW. Can you clarify this for me?
    2. If possible, please provide the steps to use this extractor technology to extract data back to BW in detail so that I can try it.
    Thanks

    Hi Amanda,
    1. The data flow is from BW to APO, and from APO to BW.
    from bw to apo, to feed planning area, characteristic value combination, in APO we have infocube to feed the data, as we know APO has BW inside (all the tcodes RSA1 etc are valid), datamart scenario is used here, we create infocube in APO, update rules, infosource and assign datasource from BW.
    The data flow from APO to BW, to get the plan data inputted by user, we generate datasource in APO from planning area (compare with 'generate export datasource' from infocube), transaction /SAPAPO/SDP_EXTR. 'extractor technology' here in practice is just like when we are using datasource
    take a look
    http://help.sap.com/saphelp_scm50/helpdata/en/c9/199170f13711d4b2f20050da385632/frameset.htm
    2. as mentioned in #1, you can use the transaction /SAPAPO//SAPAPO/SDP_EXTR to handle planning area-datasources in APO, or /SAPAPO/MSDP_ADMIN - planning area; choose your planning area, and menu extractor tools (or generate datasources), again datamart scenario is used here, after the datasource generated in APO, it's replicated in BW (APO act as source system), the rest steps are just same as when extract data from other SAP source system
    simply what you need to practice is /SAPAPO/SDP_EXTR to 'generate export datasource', the rest steps should be familiar already for you
    check
    http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
    http://help.sap.com/saphelp_scm50/helpdata/en/e0/9088392b385f6be10000000a11402f/frameset.htm
    hope this helps.

  • In plant parameters how the start date in past will be applicable for order

    Hi All,
    Can any one explain me in detail start in past for plant parmeters (OPPQ).
    Regards
    sailendra

    Hi,
    Start date of order proposals allowed in the past
    This indicator defines that the system does not automatically switch to forward scheduling if the order start date lies in the past for determining the basic dates. With this indicator, backward scheduling is always used to determine the basic dates, even if the start date lies in the past.
    e.g Bacward scheduling type, Today date is 08.06.2009
    If u give basic finish date say 25.06.2009,and system propose you basic start date in 06.06.2009. That is 06.06.2009 is lies in past date.In this case system propose you forward scheduling.Means order basic start date is 08.06.2009 .If you don't want to system propose you for forward scheduling tick mark Start in past in OPPQ.
    Hope this clear you.
    Regards,
    Raja.

Maybe you are looking for