How to access external IPs from inside

Hello,
We have several servers that we NAT to internal IPs on the inside interface. Normally we just setup DNS on the inside to point to the private IPs.
But I have always been curious, how do you configure the ASA so a host on the inside can talk to a public IP address behind that same ASA?

AAArrrrgggghhh!!! I misread the original post.
But for Karthik's suggestion to work, DNS requests would need to pass through the ASA to a DNS server in either a DMZ or out on the internet. If DNS requests do not pass through the ASA then you will need to NAT the public IP to the private IP on the inside interface in a hairpinning manner.
Keep in mind that when using DNS doctoring you would need to have an ACL permitting traffic from the internal IP to the private IP of the server if traffic is being denied to the private IP.
For NATing the public IP to the private IP on the inside interface you could do something like the following:
object network SERVER
host 10.0.0.100 (keeping with Karthik's example ;-) )
object network LAN
subnet 192.168.100.0 255.255.255.0
object network SERVER-PUB-IP
host 1.1.1.1
same-security-traffic permit intra-interface
nat (inside,inside) source static LAN LAN destination static SERVER SERVER-PUB-IP
Please remember to select a correct answer and rate helpful posts

Similar Messages

How to access external jars from ejb jars

All,
This is my first visit/post to this group. What I'd like to know is how
an external jar file with common, shared classes can be access by a
session bean in an ejbc'd jar. I'm running WLS 6.1 and have some DAO
and other classes in a common.jar that I'd like all my ejbc'd jars to
have access to. Any help would be appreciated!
-Keith

Keith,
"Keith" <[email protected]> wrote in message news:[email protected]..
This is my first visit/post to this group. What I'd like to know is how
an external jar file with common, shared classes can be access by a
session bean in an ejbc'd jar. I'm running WLS 6.1 and have some DAO
and other classes in a common.jar that I'd like all my ejbc'd jars to
have access to. Any help would be appreciated!I'd recommend packaging your application as an EAR - than your
ejbjars will have access to utility jars.
Regards,
Slava Imeshev

How to access a variable from inside another symbol

So i did this tutorial, Leveraging Independent Symbol Timelines created by Eliane...it's rockin, btw. ;-)
All's well but now i have a symbol on the stage called mc-home. inside of mc-home is a button called btn-go.
On the stage in composition ready there's a variable sym.setVariable("current", "mc-home");
This code works for a symbol that's on the stage but, how do i get this code to work on a button that's inside another symbol that's on the stage?
var current = sym.getVariable("current");
if (current != "") {
sym.getSymbol(current).play("OUT");
sym.getSymbol("mc-something").play("IN");
sym.setVariable("current", "mc-something");

sorry, i was kind of confused myself too, don't worry about it but thanks for your patience for reading it anyway

How to Access v$ views from inside PL/SQL?

I cannot grant select on these v$'s for users. Could someone recommned a solution for something like:
function conn_cnt(v_name in varchar2, v_stat varchar2) return number
is
p_val number := 0;
begin
EXECUTE IMMEDIATE
'SELECT COUNT(*) FROM V$SESSION WHERE ' ||
'USERNAME = :1 AND STATUS <> :2 ' ||
'AND SID NOT IN (SELECT SID FROM V$MYSTAT WHERE ROWNUM < 2)'
INTO p_val USING v_name, v_stat;
return p_val;
exception
when others then
raise_application_error(-20011, sqlerrm);
end;
Thanks.

Thanks John,
but:
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> grant select on v$session to <id>;
grant select on v$session to <id>
ERROR at line 1:
ORA-02030: can only select from fixed tables/views
- Zack

How to access extern files from a servlet

Greetings,
I am using the 90-days-trial Version of SAP Web AS 6.40 and the SAP NetWeaver Developer Studio.
I have created a HTTP Servlet that reveives a XML-file. Now I want to parse and validate this file. The class that I have created to validate this file works fine and also the communication with the servlet does not make any problems.
The problem I have is that I have to use three .xsd files to validate the xml-content. When I use the absolute path to define the location of these three files (on my hard disk), everything works fine. But I did not yet find the right location where to place the xsd files to make them accessible using a relative path.
I already tried to place the files in deifferent locations, and I also created a .jar containing these xsd files, I deployed it and created a reference in the .ear, but this does not work neither.
I would be very grateful if you could give me a hint where to place these files.
Thank you very much in advance.
Bye,
Nadine

Hi Nadine,
assuming that your validation class is located in package "de.nadine.validation", then the source (and class) directory structure has to look like this:
de
|-nadine
..|-validation
....|-Validation.java
....|-schema.xsd
If you then use
URL schemaURL = de.nadine.validation.Validation.class.getResource("schema.xsd");
this will work, definitely.
Hope that helps.
Regards
Stefan

Accessing External Data from SharePoint 2010

I want to access external data from my SharePoint site.
I'm told that I need to follow these two articles.
http://msdn.microsoft.com/en-us/library/ff953161.aspx
http://msdn.microsoft.com/en-us/library/ff625800.aspx
I followed the first article but I get this error when I open the external list in my SharePoint site:
"Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator."
I don't know how to write a custom code
BTW I have installed PowerPivot on my SharePoint server.
Can someone please help me? I need to do this very quickly.

Hi,
Can you please elaborate whether the data you are getting is from excel file or from database.
1. If you are populating it from excel , then you can use the Excel service, Power pivot etc mechanism.
2. If you are getting it from SQL database then you can use BCS service application and use the OOTB external list and content type to display the same in your home page.
Links of artcles are given below.
http://www.concurrency.com/blog/accessing-external-data-using-business-connectivity-services-in-sharepoint-2010/
http://msdn.microsoft.com/en-us/library/ff677562(v=office.14).aspx
Hope this will help.
Thanks and Regards, -- Santanu Kumar Choudhury ----- SharePoint 2007/10/13 Developer

How to Access Maintenance View from a program

Hi Experts,
I have created a maintenance view for a table. i want to insert data's into the table through the maintenance view. I don't know how to access the view, how to insert data into the Maintenance view. Please suggest me how to access the view from the program.
with regards,
James...
Valuable answers will be rewarded...

Hi,
What is the need to search for a program.
Use transaction SM30 or SE16 to create or maintain entries in the table.
e.g. if the Maintenance view is created on table A, then Goto transaction SM30 or SE16 and give the table name as A and proceed. This will automatically take u to the maintenance view on tha table A.
Regards,
Himanshu

How to access Oracle 8g from SQL Server 2005 SP3 EE 64 Bits ?

Dear All,
How to access Oralce 8g from SQL Server 2005 SP3 EE 64 Bits (liked server).
Best regards,
Miguel Gavinhos

Hi!
For the Oracle version is 8.1.6. what should I install, to access Oracle trought a linked server.
Best regards
Miguel Gavinhos

How to access the cloud from my pc?

how to access the cloud from my pc?

Go to Verizonwireless.com, log in to your account (or register your phone number if you haven't done so). Once logged in, Go to My Verizon, My Device, Backup my contacts. That should bring you to your Cloud "dashboard" - where you can view Contacts, Photos, Videos, Music,Documents, and anything else you've sent to Verizon Cloud.
If this doesn't work for you, then where does it break down? Do you get any error messages?

How to access the Oracle from Unix when SID is not provided?

How to access the Oracle from Unix when SID is not provided.
User Name : xxx
Password : yyy
SID : SID
I use to access it using below command from Unix prompt:
sqlplus xxx/yyy@SIDNow since I dont have SID, how to access the Oracle DB from Unix Box?
User Name : xxx
Password : yyy
Service Name : zzz
Regards,
Sunny.

Hi Ajay
Thanks for the suggesstion :)..It worked as well.
The Actual problem was in the "tnsnames.ora" file where in I need to make entry for the new SERVICE name.
Now I am able to connect it properly.
Regards,
Sunny.

How to access Cyrillic glyphs from Trajan Pro 3 Regular?

I can download Trajan Pro3 regular in greek and latin glyphs but not in Cyrillic. Using Mac OS 10.7.5, Font Agent Pro 6.010.
No EULA Licence Agreement in russian, but Adobe told me I bought the right font (with cyrillic glyphs).

Thank you a lot.
The first downloading was not correct. I loaded again, and now it is ok.
Best regards
Catherine Anderegg
Anderegg Graphic
Le 23 févr. 2015 à 21:10, MiguelSousa a écrit :
How to access Cyrillic glyphs from Trajan Pro 3 Regular?
created by MiguelSousa in Adobe Type - View the full discussion
Yes, the Trajan Pro 3 fonts have Cyrillic glyphs in them. You need to use Unicode-encoded text to get to them.
Википедия
Cyrillic script in Unicode
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7222734#7222734 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7222734#7222734
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Type by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can anybody tell how to access web service from Message Driven bean

Can anybody tell how to access web service from Message Driven bean

Can anybody tell how to access web service from Message Driven bean

How to access external drive attacked to AirPort Extreme from ipad

Have attached external drive to AirPort Extreme via USB, how can I access those files from iPad / iPhone?

Check to see if the File Browser App can do this:
App Store - FileBrowser - Access files on remote computers

How to copy/access a string from inside the driver

is there any equivalent to strncpy() to use inside
the driver for copying user sent data to local buffer .
i used I_STRioctl and assigned struct to strioctl.ic_dp
as shown below..
char * buf;
struct user-data
int minor;
char* data;
struct user_data u_data;
buf="hello world"
u_data.minor=0;
u_data.data=buf;
strioctl.ic_dp=&u_data;
strioctl.ic_len=sizeof(struct user_data);
ioctl(fd,I_STR,&strioctl);
when i tried to copy/access the string sent by the user application from inside the driver, machine gets into
booting ...
here what i did was
in wput routine
struct user_data *u_data;
u_data =(struct user_data*)mp->b_cont->b_rptr;
cmn_err(CE_NOTE,"minor= %d",u_data->minor);
till here working well..
where as..
cmn_err(CE_NOTE,"data= %s",u_data->data);
causing panic to the system...booting happens.
please help me out ..
thank u all
ss vasu

looks like the data pointed to by 'data' is not copied from user space to kernel space.
u_data.data=buf, just makes pointer assignment, does not copy data pointed to by buf.
two solutions:
1. Declare data as a array(char data[10] or something
2. Copy buf after the structure and point data to it. strioctl.ic_len should be set to sizeof(struct) +
data size.
-Vijay
is there any equivalent to strncpy() to use inside
the driver for copying user sent data to local buffer
i used I_STRioctl and assigned struct to
strioctl.ic_dp
as shown below..
char * buf;
struct user-data
int minor;
char* data;
struct user_data u_data;
buf="hello world"
u_data.minor=0;
u_data.data=buf;
strioctl.ic_dp=&u_data;
strioctl.ic_len=sizeof(struct user_data);
ioctl(fd,I_STR,&strioctl);
when i tried to copy/access the string sent by the
user application from inside the driver, machine gets
into
booting ...
here what i did was
in wput routine
struct user_data *u_data;
u_data =(struct user_data*)mp->b_cont->b_rptr;
r;
cmn_err(CE_NOTE,"minor= %d",u_data->minor);
till here working well..
where as..
cmn_err(CE_NOTE,"data= %s",u_data->data);
causing panic to the system...booting happens.
please help me out ..
thank u all
ss vasu

How to access a value from "List of Values" by giving a name?

I have a "List Of Values" defined in my BI Report. It comprises list of label-value pairs.
I have defined a parameter :p_Value for the above "List Of Values" defnition. this parameter is used in datasource sql defnition to filter the query results. I configured a template which has a table that shows all the parameters used for filtering query results. If I give <?$p_Value?> in the template then the parameter value is rendered on it. But I want the "name" of the parameter and not the value. Can anybody tell me how to access name of the parameter which refers to one of value in "List of Value" defnition?

option 1:
Can you get the value from the DB in the report sql ?
You have the code, inside the report query, if you can get the decoded value form that
option2:
create another paramater, LOV and query, and make it as hidden, and use the first :param_1_value in the lov query in the second param and decode the value.
Now , you can refer the :PARAM_2_value in template which will have decoded value.

How to access external IPs from inside

Similar Messages

Maybe you are looking for