How to access firefox internals (debugger) with mozrepl

I want to use mozrepl to:
- open js debugger
- switch js file
- toggle breakpoint
How to do it?

Best place to ask this is in their support mailing list: [https://groups.google.com/forum/#!forum/mozlab]

Similar Messages

  • How to access Cotnet Services Webdav with anonymous?

    How to access Cotnet Services Webdav with anonymous?

    See the section entitled 'Enabling the Ability to Grant Public Access' inthe Content Services administrators guide. Once you have granted public access to a document you will not need to authenticate to access it.
    regards,
    -sancho

  • I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
    Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
    Type the name directly into windows explorer.
    \\TCname or \\TCIPaddress
    If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
    Ensure windows is able to at least ping the TC by IP address and name..
    Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

  • How to access a shared disk with two users account on same Mac

    I am seeking how to share / access at same time with two accounts on a same Mac a disk that is shared with a TC or an AEBS. When a user account is connected to the shared drive and when I switch to the 2nd user this 2nd user cannot access / see the content of the shared drive and it receives an error message. I want to use this shared drive to store some GB of movies I do not want to have on my MacBook Pro SSD but still bring able to access them from the two accounts that are set on my Mac. Just like for an internal drive. I have tried all I could but it does not want to work. How do I do that ? Thanks.

    If you were running this software, the Mac's Bonjour would automatically "discover" The Linux machine.
    http://en.wikipedia.org/wiki/Avahi_(software)

  • How to access OS User created with "identified externally"

    I am able to
    SQL> create user ops$deskuser identified externally;
    while deskuser is one of my OS user.
    I believe it is a very easy question, however I just do not know how to access this user from sqlplus., please help
    Thanks in advance

    oracle@mini:~> sqlplus system
    SQL*Plus: Release 10.1.0.3.0 - Production on Sun Nov 13 21:11:47 2005
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> create user ops$pops identified externally;
    User created.
    SQL> grant connect to pops;
    Grant succeeded.
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    oracle@mini:~> su - pops
    \Password:
    Illinois isn't exactly the land that God forgot -- it's more like the
    land He's trying to ignore.
    pops@mini:~> . oraenv
    ORACLE_SID = [pops] ? orcl
    pops@mini:~> sqlplus /
    SQL*Plus: Release 10.1.0.3.0 - Production on Sun Nov 13 21:16:59 2005
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL>

  • How to access Views of ERP with Netweaver BPM?

    Hello,
    i want to create an example-application with Netweaver BPM and Visual Composer.
    For this, more employees should share the creation of a new Material in an ERP Backend.
    Every emplyoee should enter data of a different View of MM01 ! (like Basic Data, Sales..., Purchasing., ..)
    I thought about using the Service "Create Material Basic Data" but there are only little options for the data you can enter
    (only InternalID, Base Units, Description...).
    So my question is, how can i get access to the usual views of MM01 with Netweaver BPM and Visual Composer?
    Or how can i enter more Materialdata with Webservices?
    Thanks for your help,
    Oliver

    What you could also do is make use of MDM Webdynpro Components since your intention is probably to update master data at the end you can use MDM Webynpro Components and then use them a webdynpro application. Use the webdynpro component in the BPM Process in return or use the option given in the previous reply as well.
    http://help.sap.com/saphelp_nwmdm71/helpdata/en/4a/387eb4a7ea1ca2e10000000a42189c/content.htm
    Link to MDM WD Comps

  • How to access a Beckhoff 9000 with TCP/IP?

    Hello,
    i´m using LV 8.5 with Windows-XP.
    A Beckhoff9000 (BK9000) is connected via LAN.
    What is working is, that i can ping my BK9000 in a cmd-box.
    The BK9000 has also connected:
    KL2134 (4 outputs)
    KL2134 (4 outputs)
    KL1418 (8 inputs)
    KL9000 (end)
    Is there an easy example of how to access these in- and outputs?
    Something like
    input:
    - IP-address (192.168.0.23)
    - module-number (1..3)
    - input-number (1..4 or 1..8)
    - mode (on/off)
    output:
    state (on/off)
    Thanks for all help how to do this.
    All i want to do is to enable or disable outputs and to read the state of an input.
    best regards

    Hi OnlyOne,
    did you see this thread?
    Hope it helps.
    Mike

  • How to access my hardware devices with firefox?

    I am developing the Web Based POS System Which require to access the computer resources so how can i access my hardware in firefox
    == This happened ==
    Every time Firefox opened

    You should be able to access any of the files on the Idisk.
    You will need to construct a new site and in the future you should backup the "domain" file located in your user library/application support/iweb.
    If you had that file you would not have lost anything.

  • How to access internal hard drive with screen not working

    Veteran Mac user from Spain,
    I am a graphic designer and i have a MacBook Pro 17 inch Intel Core 2 Duo 2.4 GHz (Santa Rosa) which i purchased in October of 2007 along with a 23 inch Apple Cinema HD Display Monitor which i have hooked up to my MacBook when i am working at home. About 2 months ago the right hand ventilator started making a very loud noise but because i had a lot work on i did not have time to send it away to be fixed. Then about a month ago the fan stopped working and i was very concerned that my MacBook was going to overheat but to my surprise the temperature never rose above 60 degrees, so i continued to work and every thing seemed to be okay. But a couple of weeks ago i was online and the computer suddenly froze up and when i restarted it all i got was a black screen on both the MacBook and the Cinema Display Monitor. The hard disk seems to boot correctly and the keyboard on the MacBook also is responsive (volume, brightness controls, caps/number lock, etc… are all responsive and the retroilumination on the keyboard also works). So on reading up on the forums i discovered that the graphics card NVIDIA 8600M GT is in fact faulty. I called apple and explained the problem and they told me that i will also have to replace the logic board.
    On discovering the problem i realised that it would take a while to be fixed and i would need another Mac to continue working. So last week last week i purchased a Mac Mini and hooked it up to my Cinema Display and everything is working fine, BUT i desperately need to access my work folder on my MacBook's internal drive.
    Can anybody tell me how to transfer the files from my MacBook (late 2007) to my Mac Mini without the screen working on my MacBook?
    If it helps, my MacBook is running Leopard 10.5.8 and the Mac Mini is running Lion 10.7.2. The Mac Mini has an Intel i5 processor 2.3 GHz.
    I would really appreciate the help, it is very urgent and i need to find a very quick solution, clients depend on it.

    Thank you very much for your swift response.
    I am going to try the second option that you propose because as i mentioned in my first post, i had my MacBook Pro hooked up to my Apple Cinema HD Display monitor and both screens were black.
    Just one question…
    Will the hard drive need an extrenal power source?
    I am guessing that it will use the Mac Mini's power supply but i just want to make sure.
    Thanks again! You have been most helpful.

  • How to access my website created with iWeb after hard drive replacement

    I recently had my hardrive fail and it was replace with a new one. It just happened to be the only computer I used to create and update my website. I lost some photos that are on my website, but there are 1 or 2 photo pages that I can't download them back to my computer from. Is there another way to get them from the .mac server to my computer? I hesitate to create a new iWebsite for fear of losing the one that has the photos I want. Thanks

    You should be able to access any of the files on the Idisk.
    You will need to construct a new site and in the future you should backup the "domain" file located in your user library/application support/iweb.
    If you had that file you would not have lost anything.

  • How to access SAP database tables with Java (Jco)

    Hi!
    I need to develop a Java Client for SAP with access to the SAP database. Is there a way to do this directly in Java (the db access) or do I have to use some ABAP logic in between to get the information to the java client? If so, are there any existing ABAP functions to read AND write db tables? Or do I have to create my own wrappers for each table I need to read and write?
    Thanks,
    Konrad

    hi,
    i am sending code .i think it will help u
         try {
                   // Add a connection pool to the specified system
                   //    The pool will be saved in the pool list to be used
                   //    from other threads by JCO.getClient(SID).
                   //    The pool must be explicitely removed by JCO.removeClientPool(SID)
                        this.objClient = JCO.createClient(strClient, // SAP client
                        strUserID, // userid
                        strPwd, // password
                        strLang, // language
                        strHost, // host name
                        strSysNr);
                   this.objClient.connect();
                   // Create a new repository
                   //    The repository caches the function and structure definitions
                   //    to be used for all calls to the system SID. The creation of
                   //    redundant instances cause performance and memory waste.
                   this.objIRepository =
                        JCO.createRepository("MYRepository", this.objClient);
              } catch (JCO.Exception ex) {
                   System.out.println("Caught an exception: \n" + ex);
              JCO.Function objFunction =
                   this
                        .objIRepository
                        .getFunctionTemplate("BAPI_MATERIAL_AVAILABILITY")
                        .getFunction();
              objFunction.getImportParameterList().setValue(strPlant, "PLANT");
              objFunction.getImportParameterList().setValue(strMaterial, "MATERIAL");
              objFunction.getImportParameterList().setValue(strQuantity, "UNIT");
              this.objClient.execute(objFunction);
              JCO.Structure ret =
                   objFunction.getExportParameterList().getStructure("RETURN");
              String strRetMsg = ret.getString("MESSAGE");
              if (strRetMsg.equals("Unit  is not created in language")) {
                   arrResult.add("error");
                   return arrResult;
              } else {
                   String strQty1 =
                        objFunction.getExportParameterList().getString("AV_QTY_PLT");
                   if (strQty1.equals("0"))
                        result = "no";
                   else
                        result = "yes";
                   arrResult.add(result);
                   return arrResult;

  • How to access HID Class Devide with C program??

    HI, every,
    I need to port an application from linux to Max OS X ,
    Working on C enviroment.
    On linux, API from
    lib #include <linux/hid.h>.
    I use to open/ioctl HID handle directly,
    Now, On Mac OS X,How to do this,No hid.h in mac OX S?
    I already read a doc about hid programm,It use IOKIT framework to do this.
    On System, I already install XCode Tools, Why not find IOKIT packages.
    Where is the IOKIT library found?
    Could you help me?
    Thanks

    That's the way you do it. How did it fail? Did you get an error message or what?
    Anyway, the idiom for dealing with standard input is this:
    BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
    String line;
    while((line = in.readLine()) != null) {
      // line contains one line of input
      // do whatever you like with it
    }Java 5 adds some other options.

  • How can access hours be restricted with airport extreme

    I want to be able to stop my kids from accessing the internet and bogging things down during the day when working from home.  Is there an easy way to do this with an Airport base station network or by setting up a guest network?  I have tried using parental controls but that limits all computer use, not just online access hours.  Any help would be appreciated.

    You do have a number of choices available to you to restrict access, either completely through AirPort's Access Control, or limiting what they will be able to access on the Internet. If your goal is to restrict them from particular sites or categories of sites, like P2P sharing torrents, one option is to use OpenDNS as your DNS provider. Through their service, you can easily configure what they can access or not.

  • How-To Access ADF application module with ADF faces

    Sorry for the repost but I don't get answer in the other Thread.
    If you look in this little demo you see that you get the DCBindingContainer bc = getBindingContainer(); initialization, but my method getBindingContainer(); gives back null.
    What could be the problem with this? Should I make some changes in preferences or something like that?
    I work with JDeveloper 1013
    Greetings Thijs

    Steve Muench made an example of that on his blog, here is the url for the source download: http://otn.oracle.com/products/jdev/tips/muench/accessbindingsinbackingbean/AccessAppModuleInBackingBean.zip
    There's one canveat to this technique however. #{binding} seems to be stored in requestScope and therefore can only be injected in request or none scoped managed beans.
    Regards,
    Simon Lessard

  • How to access SOAP web service with authentication, HTTP basic Authentication

    Dear All
    i use Flash Builder 4.5, flex 4..1, i am developing a flex client to soap webservices hosted over Glassfish 2 Java server, the web services is protected by HTTP Basic Authentication, everythime i run my code , the prombt for username and password show up, i need to pass user name and password through action script, i followed the flollowing (but was for http web service, not soap) but really did not work.
    http://stackoverflow.com/questions/490806/http-basic-authentication-wi th-httpservice-objects-in-adobe-flex-air
    http://forums.adobe.com/message/4262868
    private function authAndSend(service:HTTPService):void
            var encoder:Base64Encoder = new Base64Encoder();
            encoder.insertNewLines = false; // see below for why you need to do this
            encoder.encode("someusername:somepassword");
            service.headers = {Authorization:"Basic " +encoder.toString()};                                               
            service.send();
    Also i noticed in debug mode, always that WARNNING raised up
    Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml.  The 'secure' attribute is only permitted in HTTPS and socket policy files.  See http://www.adobe.com/go/strict_policy_files for details.
    any idea ?

    Hello,
    I don't know if this could help.
    Another way to connect to a web service by SOAP and WSDL is to click on the Data/Services panel, then click on "Connect to Data/Services" and then select the "Web Service" (WSDL) icon. This could help as well.

Maybe you are looking for