How to access Workfow Container data in a program.

Hello I need to a access Workflow COntainer data for a particular workitem in a program. How to access these using Tables or standard function modules.
Thanks in advance.

swc_container it_event_container.
swc_create_container it_event_container.
CALL FUNCTION 'SWW_WI_CONTAINER_READ'
            EXPORTING
              wi_id                    = wd_id
            TABLES
              wi_container             = it_event_container
            EXCEPTIONS
              container_does_not_exist = 1
              read_failed              = 2
              OTHERS                   = 3.
if sy-subrc = 0.
READ TABLE it_event_container WITH KEY element = 'name of your workflow container element'.
            IF sy-subrc = 0.
              w_variable= it_event_container-value.
            ENDIF.
endif.
Regards
Kedar

Similar Messages

Programmed Binding (Container IF) - how to access source container data

Hi,
I have created a programmed binding (container IF) using a function module based on SWA_BINDING_TEMPLATE.
I want to access an element (Meldung) based on BUS2078 (QM notification) from my source container and then retrieve the material from this element.
When the element is a simple element such as WfInitiator for example I cant retrieve the value using the get method on the source container but when it is a complex element such as a BOR object it does not work. How can I retrieve such data.
Thanks for your help,
Emmanuel

I finally found the answer last week, here is how I have done :
    DATA : l_matnr TYPE matnr.
    DATA : l_string TYPE string.
    DATA: lcx_container TYPE REF TO cx_swf_cnt_container.
    DATA: b_meldung TYPE swf_bor_object.
    TRY.
        CALL METHOD source_container->get
          EXPORTING
            name = 'Meldung'
          IMPORTING
            value = b_meldung.
        swf_get_property b_meldung 'Material' l_matnr.
      CATCH cx_swf_cnt_elem_not_found .
        l_string = 'cx_swf_cnt_elem_not_found'.
      CATCH cx_swf_cnt_elem_type_conflict .
        l_string = 'cx_swf_cnt_elem_type_conflict'.
      CATCH cx_swf_cnt_unit_type_conflict .
        l_string = 'cx_swf_cnt_unit_type_conflict'.
      CATCH cx_swf_cnt_container INTO lcx_container.
        l_string = lcx_container->t100_msg.
    ENDTRY.
Emmanuel

How to access the Custom Data type variable given in Expression edit control To and From LabVIEW

Hello, I would like to know how to access the custom data type variable given in the Espression Edit Control from LabVIEW and vice-versa
Say, the FileGlobals.Reference_Handle (Custom Data Type Variable) contains the
VISA I/O session (Which in turn contains VISA_DeviceName: String, Session: Number),
Channel1: Number and
Channel2: Number
I am expecting the user to give FileGlobals.Reference_Handle as the input at the ExpressionEdit Control in the edit screen of the VI Call.
I would like to know how to get the values of this custom data type to LabVIEW?
Say, if I have the Cluster in LabVIEW like VISA I/O session (Deive Name and Session Number), Channel1 and Channel2
how do i need to set this cluster to the Custom Data type variable in TestStand?
Thanks and Regards
Prakash

Hi,
TestStand to LabVIEW: i didnt understand what you r trying to achieve. But if you are using references, Use Property nodes and Invoke nodes to achieve what you want in LabVIEW.
LabVIEW to TestStand: check the image below: You need to click the button next to 'container'. I have used a cluster output in the VI.
Hope this helps
.......^___________________^
....../ '---_BOT ____________ ]
...../_==O;;;;;;;;_______.:/
Attachments:
1.JPG ‏187 KB

How to access the global data in user exit.

Hi All,
How to access the global data in user exit.
the question is that when we were writing a code in the FM. i need to read data from the standard program like newly created documen and this document number need to be accessed in my program.
this document number is not imported to the FM i needed to access for frther proceed.
Thanks in advance.

Hi,
See the below PDF file by Jeff Goldstein. There you can find all the details about accessing data outside of the exit.
[SAP User Exits and the People Who Love Them|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8]
This will help you to solve your problem.
Regards
Karthik D
Edited by: Karthik D on Dec 2, 2008 4:18 PM

How to access internal table data from webdynpro to Flex application.

Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanth

Hi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris.

How to access(connect) BI Data in webdynpro for java applications

Hi ,
is there any way to access and display the BI data in portal using webdynpro for java applications like we did in Visual composer.
if not how to integrate the BI data in webdynpro applications ?
Regards,
Govindu

Hi,
Yes there are ways to do it. But may your scenario and the scenario for which I have done may differ.
You can use openhub to get the data in a flat file and then read it into weddynpro through a java service OR
You can use DBlink(which i have done).
Please refer the link below:
[Link|Data from BW to Oracle.;
This I have done in NW04s. Not sure whether a better solution is available in the newer release.
Hope it helps.
Regards,
Manoj

How to access Sybase IQ data from SAP BW

Hi,
I read from Sybase website that we can access Sybase IQ data from SAP BW using Remote Cube through JDBC driver.
Is there any documentation on how to configure that?
Thanks in advance for your help.
Our BW version is 7.01
Sybase IQ is 15.4
Thanks,
CH

Hi,
The two files that are created are one is Control File ( will save as filename_s ) and other is data file. The control file will give you the details of your fields in your Infospoke
regards
Srini
Message was edited by:
Srinivas

Can I access WorkFlow Container Data After Archiving?

Hello .....
I am tasked to Archive thousands of old WorkFlows that are cluttering up our system and are beginning to cause performance issues.
I have managed to Archive some WorkFlows in our DEV system with Tcode SARA.
My question is .... Can I still access container data for Archived WF's? I can see logs that indicate successful Archive but our Managers still want to be able to see the container data. is it possible or is it gone? tahnk you in advance.
Dan Avis

Hello,
Your archiving isn't successful until you've tested it out - and answered your own question.
But as far as I can recall (I'll check) - yes, the container values are present. So far I haven't been able to find anything that was missing.
regards
Rick Bakker
hanabi technology

How to access client specific data in VC through BAPI

Hi Experts,
I am Using BAPI to insert the values in to the back end system from a form, But the values are not getting inserted in to the back end system. BAPI developed is in client 100 but through VC i am able to get the values only from client 800. can any one of you help how to access the data from client 100 in VC.
Regards,
Lakshmi

Hi Prachi,
Your answer is really very helpfull to me thanks a lot for your reply, but the data hasn't been entered in to back end system in client 800 also.In VC just i took the BAPI and from the input port of BAPI i have dragged and select ADD form then the UI elements had automatically added in to the form,now when i entered the values in the form and submit the values are not entered in to the back end system. I am not knowing where the error is.can you please help me out in this
Thanks and Regards,
Lakshmi.

How to access listbox binding data from a button which is not part of listbox in xaml page

Hi
I have the below listbox and its bdining as below
<ListBox x:Name="listMyPosts" ItemsSource="{Binding Path=MyPostsDataSource}" Grid.Row="0" >
           <ListBox.ItemTemplate >
                      <DataTemplate >
                                    <StackPanel Orientation="Horizontal">
                                        <TextBlock Text="{Binding
NewPostText ,Mode=TwoWay}"/>
                                        <TextBlock Text="{Binding
NewPostSender}"/>
                                    </StackPanel>
                            </DataTemplate>
            </ListBox.ItemTemplate>
           <Button content="Send Post" command ="Binding SendClickCommand} />
</ListBox>
And i am assining postsViewmodel
private PostsViewModel _PostsViewModel ;
public Conversation()
InitializeComponent();
_PostsViewModel = new PostsViewModel ();
this.DataContext = _PostsViewModel ;
public ObservableCollection<PostsModel> MyPostsDataSource
get
if (_MyPostsDataSource== null)
_MyPostsDataSource= GetMyPosts();
return _MyPostsDataSource;
set
this._MyPostsDataSource = value;
RaisePropertyChanged("MyPostsDataSource");
is that possible to access listbox binding data from the ViewModel's SendClickCommand property ?
Krrishna

If you need to pass to the command selected item, try this
<Button Сontent="Send Post"
Сommand ="{Binding SendClickCommand}"
  CommandParameter={Binding ElementName=listMyPosts,
Path=SelectedItem}/>
msdn

How to access two oracle data base with out DB link

Hi,
I have two data base schema
one is held in oracle 10g and the other in 11g ,Currently i am using DB link to access both the database. i am accessing around 70 tables using DB link.
As per new requirement i have to remove DB link ,is there any other way i can access both database with out DB link.
Thanks,

malarkandy wrote:
I have two data base schema
one is held in oracle 10g and the other in 11g ,Currently i am using DB link to access both the database. i am accessing around 70 tables using DB link.
As per new requirement i have to remove DB link ,is there any other way i can access both database with out DB link.Yes. But that needs another network and application interface instead of a database link.
The target database can implement PL/SQL web services. These can be called via HTTP.
The local database can use UTL_HTTP to make a call to the target database's web service for accessing target database data.
Both databases can use AQ (Advance Queues). This can be integrated with an application server's JMS queues.
This enable one database to enqueue a request to the other database, and for that database to respond by sending data.
There are numerous such type of interfaces that can be used. Some primitive. Some advanced. Some simple. Some complex.
The easiest and most flexible mechanism is however a database link. And it does not make sense to disallow database links for security and management reasons, but allow JMS for example. The network infrastructure is the same for both methods. The network protocol is the same. The security issues and concerns are the same - except that JMS for example is significantly more moving parts and make configuration and security a lot more complex than using a database link.

How to access Previous Records' Data from within a Query?

Hi All,
I am making a report in which I need to compare my "Registration Start Date" with "Registration End Date" of previous registration of same customer. This is to check if there are gaps between any customer's registrations.
In scenario shown below, I want to filter out RegID '1' as it comes after a gap from previous registration(RegID '3') of the same customer.
RegID CustID Registration Start Registration End
1 1 01/04/2005 07/04/2005
2 2 01/03/2005 29/05/2005
3 1 21/03/2005 29/03/2005
4 1 01/03/2005 21/04/2005
I created the join of this table with itself to pick previous records. it is something like:
Current_Rec.Cust ID = Prev_Rec.CustID AND
Current_Rec.RegStart > Prev_Rec.RegEnd
But this gives wrong data if customer has 3 back-to-back registrations. i.e. Shows last registration in query results as their is a gap between 3rd and 1st registration. But ofcourse there was another record between these two(which was 2nd registration).
It would be so nice of you guys if you can suggest a solution to this. Any oracle function?
Thanks & Regards,
Ahsan

I Assume the following is your sample data
Table Name: Tab1
RegID CustID Registration_Start      Registration_End
1      1      01/04/2005           07/04/2005
2      2      01/03/2005           29/05/2005
3      1      21/03/2005           29/03/2005
4      1      01/03/2005           21/03/2005
Note : For the Regid "4" I have changed the Registration_End to 21/03/2005. It was earlier 21/04/2005.
Coming to the query, you need to generate the list of regid that have gaps.
Try the following query:
SELECT c.*
FROM tab1 c
WHERE c.reg_id NOT IN (
SELECT a.reg_id
FROM tab1 a, tab1 b
WHERE a.cust_id = b.cust_id
AND a.registration_end = b.registration_start
Note: I am sorry I didn't have access to the data base to execute my query. Correct me if I am wrong.
Regards,
Somu

How to access Infocube content using an ABAP program

Hi,
   I am trying to access infocube contents using a ABAP program in BW.
   It is easy to access ODS content as we have NEW DATA or ACTIVE DATA
   tables. Is there any way we can access Infocube content.
   I tried using the FACT table but it has only Keyfigure data.
thanks
arshad.

Hi,
I would suggest to use a transactionnal cube, even if you do not use BPS to feed it.
Then, you create a layout in transaction BPS0 (~ similar to a query), and you can access the cube content by simply using the SAP function <b>API_SEMBPS_GETDATA</b>.
This is easy and fast.
Regards,

How to access SharePoint External Data column using Silverlight Client Object Model

Hi Friends,
I have one sharepoint list which has column of type External Data type. My need is to access each item and get the values from the External Data Type column field.
Can anyone help me how to acheive this. I am begineer in Silverlight.
Thanks, Cool Developer

Hi Friends,
I have one sharepoint list which has column of type External Data type. My need is to access each item and get the values from the External Data Type column field.
Can anyone help me how to acheive this. I am begineer in Silverlight.
Thanks,
RajanThanks, Cool Developer

Re: How to access Property meta data for KM in webdynpro

Hi Friends,
I have created a custom property System admin- system configuartion - KM content - Content management - Global service - property meta data .
I have assigned this property to a Folder , Now I want to access this property in my code .
How can this can be possible ??
Thanks in advance

Hi Mayank,
have a look below to call property
/message/1193263#1193263 [original link is broken]
Koti Reddy

How to access Workfow Container data in a program.

Similar Messages

Maybe you are looking for