How to activate "RqDone" counter in tmadmin ?

Hi,
I would like to see the "RqDone" counter when I list my process or services (psc, psr) on tmadmin, but I can only see it in my single machine configuration. When I use my 2 machines configuration (MODEL = MP), "RqDone" only displays "-" :
Prog Name Queue Name Grp Name ID RqDone Load Done Current Service
BBL 30003.00000 SUIVI2 0 - - ( - )
BBL 30002.00000 SUIVI1 0 - - ( - )
DBBL 63803 SUIVI1 0 100 5000 ..MASTERBB
BRIDGE 588091 SUIVI2 1 - - ( - )
BRIDGE 325947 SUIVI1 1 - - ( - )
CONS_INF10 00002.00012 GRP2 12 - - ( - )
CONS_INF10 00001.00012 GRP1 12 - - ( - )
CONS_INF10 00002.00013 GRP2 13 - - ( - )
CONS_INF10 00001.00013 GRP1 13 - - ( - )
CONS_INF10 00002.00014 GRP2 14 - - ( - )
How can I do that ? Only the DBBL has got this counter...
I am using Tuxedo 8.1 on Solaris 8.
Regards,
Yannick

inside tmadmin run
d -m <lmid>
then give pq command .
you will see the rqdone .

Similar Messages

How to activate a counter in CRM 2007

HI,
I created a counter in CRM 2007.I made all the necessary entries in the counter but still its showing the status as Inactive.Also there are no application logs available.
Can anyone suggest how to make it active so that i can use it in my trasactions.
I also want to know where can we define the application group for the counter??
Regards,
PePe

HI,
My scenorio is that i want to determine my warranty based on time / counter whicheveris earlier like a warranty in automobile industry.
I have created a warranty time / counter based , attached it to my ibase comp and also created a counter and attached it to warranty product and ibase component both.
Now when i create a order warranty gets determined considering the time only and not the counter.
May be i am missing some customizing steps..
I am also not aware of different characteristics of a counter..
Regards,
PePe

¿HOW CAN I ACTIVATE THE COUNTER OF BYTES IN MY BLACKBERRY?

Hello: I would like to know if it´s possible to activate the counter of bytes in my BB.
Thanks a lot.

Greetings, and welcome to the forums!
You shouldn't need to activate anything. Simply go to Options > Memory, and you'll be able to see what's available on both the phone and memory-card.
"Cats may taste like chicken, but they have more bones than rabbits."
Blackberry 101
Tips & Tricks
Videos to learn from on youtube

How To activate a paper LIcense

Hi
I did buy a Wbvpn license for 25 user webvpn The reseller send to me an envelope but in the enveloppe I didn't find a PAK number or a license .lic file on the CD
Do you know how to activate the paper License.
This is the fisrt time that I i received an paper license In other case, I received an email with the pAK number a lic file
Thanks

Hello
     My is a router 892 and not a aza
     Here the output of show version ans show licence command
Mix892(config)#^Z
Mix892#sh ver
Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.0(1)M6, RELEA
SE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 01-Jun-11 21:24 by prod_rel_team
ROM: System Bootstrap, Version 12.4(22r)YB3, RELEASE SOFTWARE (fc1)
Mix892 uptime is 2 weeks, 17 hours, 15 minutes
System returned to ROM by power-on
System restarted at 13:40:34 UTC Tue Sep 27 2011
System image file is "flash:c890-universalk9-mz.150-1.M6.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 892 (MPC8300) processor (revision 1.0) with 472064K/52224K bytes of memory
Processor board ID FCZ1533901H
9 FastEthernet interfaces
1 Gigabit Ethernet interface
1 ISDN Basic Rate interface
1 Virtual Private Network (VPN) Module
256K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO892-K9           FCZ1533901H
License Information for 'c890'
    License Level: advipservices   Type: Permanent
    Next reboot license Level: advipservices
Configuration register is 0x2102
Mix892#sh lic
Mix892#sh license
Index 1 Feature: advipservices
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 2 Feature: ios-ips-update
        Period left: Not Activated
        Period Used: 0 minute 0 second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 3 Feature: SSL_VPN
        Period left: Not Activated
        Period Used: 0 minute 0 second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: 0/0 (In-use/Violation)
        License Priority: None

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
   Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
   be adjusted to this change. To adjust the dependent objects, you must perform the following actions
   the next time you activate this object.
                    - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
                      - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                        TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
     that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
     ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
      - Now, How do I activate something which does not exist in the first place ?
    Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

How to activate all inactive objects for current user

Hi
How to activate all inactive objects for current user ...
... I have found a (long winded) way to do this:
- Environment / Inactive Objects
- Add to Worklist
- Display Worklist
- Select All
- Activate
this will open a dialog titled "Inactive Objects for <username>"
which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
does anybody know the TCode for this dialog?
thanks
ps does the term "mass activation" apply to importing change requests rather than development activation?
Edited by: FireBean500 on Jun 4, 2010 11:07 PM

No other way. But usually it's far more simple as all objects are already in our own worklist.
I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

I bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

I bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

If FaceTime is not hidden by Restrictions (Settings>General<Restrictions) you got duped. iPods officially sold in Dubai and some other countries that prohibit FT do not have FT and there is not way to get FT on those iPods.

How to activate the IS-Retail in ECC 6.0 R/3 system

Dear Guru's...........
Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
I have IDES system in my home I donu2019t know how to activate retail settings.
Please suggest me how to do that.
Regards
dnr

Dear DNR,
SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
Go to Tab: Industry Business Function
Select Business Function Set: ISR_RETAIL - SAP Retail
A new line will be appeared below.
Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
Important: I've read somewhere - Once Activated, cannot Roll-back.
Best Regards,
Amit
Note: For more, go to - http://help.sap.com
Follow the menu tree: SAP for Industries/SAP for Retail
Click on the link for "SAP industry Specific Components"
Choose the document "Business Function Set Retail"
Also,
Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD.

How to activate Events Calendar Sample Application's Weekly and Daily View?

Does anyone know how to activate the Weekly and Daily View for the sample calendar application called "Events?" I am trying to generate, or incorporate, a calendar application based upon the sample application provided by Oracle. I have installed the sample application but I am unable to view the calendar in daily or weekly formats. Any assistance would be appreciated. Thanks in-advance.

Hi,
If the calendar was set up to only use the Monthly view, then you will be missing a number of items on your page.
The simplest thing to do would be to create a new calendar page in your copy of your sample app and then identify those items that are missing from your original page. These should be Monthly/Weekly/Daily buttons, Adjust Calendar Date - Monthly/Weekly/Daily processes and a hidden Pnn_CALENDAR_TYPE page item that holds the currently displayed type.
Andy

How to get attendies count for a calendar list in sharepoint 2013?

Hi everybody,
I am using calendar list in SharePoint 2013 for my project.
Could please tell me how to get the count of attendees using SP Designer or OOTB calculated field.
Because I want to display the fields like
TOTAL SEATS =20
Attendees= Need count
Avail seats= total - Attendees count.
In that way I want to show information about availability seats for training session.
Regards,
Dhayanand

Hi Dhaya
Please refer the links.Hope it helps :-)
http://social.msdn.microsoft.com/Forums/en-US/b8677dc5-3eb1-4bdc-92f2-f57201bfabb1/field-that-counts-attendees?forum=sharepointcustomizationprevious
http://sharepoint.stackexchange.com/questions/54253/use-count-related-column-value-as-int-in-a-sp-designer-workflow

How to make the counter count or start at different time

Hi,
How to let the counter count the time, that doesn't start at the same time ?
This timing system is a sport timing system for canoe competition, it need to track 6 competitor that start at different time .
I have a problem , I have 6 counter in a VI that use to track 6 competitor, but it start count at the same time, how to make it count separately for each competitor ?
Do you guys know how to solve this problem ?
Solved!
Go to Solution.
Attachments:
multi competitor.zip ‏50 KB

HI,
ya, i run it. I mean i know how to make it to 6 competitor already , and yes, it works but the time, it still count or start at the same time. I need to run each competitor at different time , like this competitor A 20-2-2012.VI . This is the one i do but it cant put a stop button. once i put a stop button, the clock stop counting but the whole VI is running.
Regadrs,
Sam
Attachments:
competitor A 20-2-2012.vi ‏139 KB
3switch 3-2-2012.vi ‏14 KB

MY APP STORE IS NOT WORKING.HOW TO ACTIVATE IT?

MY APP STORE IS NOT WORKING.HOW TO ACTIVATE IT?

Hi sahaabhijeet,
The resource below explains how to use the App Store on your iPhone:
App Store Frequently Asked Questions (FAQ) - Apple Support
http://support.apple.com/en-us/HT2001
The App Store is a place where you can download new applications for your iPhone or iPod touch. You can browse the App Store on your computer with iTunes, or by tapping App Store on your iPhone, iPad, or iPod touch.
Do I need to sign up for a new account to shop the App Store?
If you already have an iTunes Store account, you can shop the App Store. If you do not have an iTunes Store account, you can create one using iTunes. Verify that the country flag at the bottom of the iTunes Store home page displays your country, then choose Store > Create Account. Click here for a way to set up an iTunes App Store account without a credit card. You can also create an iTunes Store account directly from your iPhone, iPad, or iPod touch by following these instructions.
Accepted payment types
Shopping the App Store requires an iTunes Store account. When you create an iTunes Store account, you must provide a payment method for your purchase. The available payment methods vary by country, but typically you can use credit cards, gift cards, store credit, or PayPal.
In countries where the iTunes Store only sells applications, the accepted payment methods are Visa, MasterCard, and American Express. Other payment types such as gift cards, store credit, monthly allowances, and PayPal are not accepted. Depending on your App Store country, prices are listed in either US Dollars or Euros.
What can I purchase from the App Store?
At the App Store, you can browse and download applications for your iPhone, iPad, or iPod touch. Applications from the App Store can be downloaded to, but not used on, your computer. To use an application from the App Store, simply sync it to your iPhone, iPad, or iPod touch. The App Store is also available on iPhone, iPad, or iPod touch1 and works over mobile phone networks and Wi-Fi, so you can download applications wirelessly and start using them instantly.
To use applications or the App Store with iPhone, iPad, or iPod touch, you must have iOS 2.0 or later installed on your iPhone or iPod touch, and iOS 3.2 or later on iPad.
Some applications are not available in all countries. Application availability and pricing are subject to change.
Cheers,
Judy

How to Activate a Condition Type in the Tax OCde for A/P -- Very Urgent

Hi Peers
I'm creating a new Tax Code in T.Code FTXP, while creating, One Condition Type is Deactivated, say JM01, How to activate that condition Type. I know how to activate the Condition Type in A/R side but I want to know it in A/P side. Plz help. Its very urgent.
Regards
Rajaram

Hi Rajaram,
U pls Check ur configuration. First u check the calculation procedure (F.A- Tax on sales & purchase-Basic setting-Check calculation procedure _ Define procedure) In the procedure field u check JM01 is activated or deactivated otherwise u created in condition Type.
I think its usefull otherwise u let me know
Thanks
R.Manigandan

How to activate FM Account assignment in Sales Order

Dear All,
How to activate FM Account assignment in Sales Order at item level in account assignment category.
Plz provide some solution for the same.
Thanks & Regards,
Pankaj

Hi,
Thanks for your reply.
I am not asking of account assignment group for material.
My problem is when i am creating Sales Order at item level in Account assignment category there is one field for Fund Mangement account assignment grp.
I want to activate this field and i have to enter FM area in that field.
Plz send some solution for the same.
Thanks & regards,
Pankaj

How to activate "RqDone" counter in tmadmin ?

Similar Messages

Maybe you are looking for